Cell-cell contact and cAMP regulate the expression of a UDP glucose pyrophosphorylase gene of Dictyostelium discoideum

UDP glucose pyrophosphorylase (UDPGP) (EC.2.7.7.9) is a developmentally regulated enzyme of Dictyostelium discoideum. Two polypeptides of UDPGP are translated from Dictyostelium mRNA. Recently we isolated a cDNA clone which encodes one of the UDPGP polypeptides (B. R. Fishel, J. A. Ragheb, A. Rajkovic, B. Haribabu, C. W. Schweinfest, and R. P. Dottin (1985). Dev. Biol. 110, 369-381). By hybridization with the cDNA and by in vitro translation and immunoprecipitation, we examined the effect of cell-cell contact and cAMP on the regulation of UDPGP expression. Disaggregation of slugs resulted in a rapid loss of UDPGP mRNA. Addition of cAMP to these cells resulted in increased levels of UDPGP mRNA, though not to the same extent as seen during normal development. The two UDPGP polypeptides observed in vitro are coordinately regulated. Unaggregated cells, starved and shaken rapidly in suspension, did not show UDPGP mRNA accumulation. However, addition of cAMP to these cells caused UDPGP induction, suggesting that the requirement for cell-cell contact could be bypassed in part by cAMP addition.     

Signal transduction pathways involved in the expression of the uridine diphosphoglucose pyrophosphorylase gene of Dictyostelium discoideum

The uridine diphosphoglucose pyrophosphorylase (UDPGP1) gene of Dictyostelium discoideum is an excellent marker to study the pathways that control the expression of genes during development. We have previously shown that the UDPGP1 gene is regulated by exogenous cAMP acting on cell-surface cAMP receptors. Various steps in the signal transduction pathway between receptor stimulation and the induction of the gene can now be studied. Induction does not require the synthesis of intracellular cAMP, but does require new protein synthesis. By deletion and transformation with altered genes, two cis-acting sequences that are required for UDPGP1 expression have been identified. A GC-rich palindromic sequence located between -410 and -374 is essential for induction of the gene by extracellular cAMP, but not for its basal expression. A sequence element located between -374 and -337 is required for any basal expression of this gene. When the polarity of the palindromic sequence was reversed such that it resembled the H2K enhancer element, the gene could still be induced by exogenous cAMP. Two DNA binding activities were detected in gel mobility shift assays using a fragment containing both of the regulatory sequence elements of UDPGP1 gene. Transformation with a vector that resulted in the synthesis of anti-sense UDPGP1 RNA led to almost total elimination of the enzyme antigen and no detectable enzyme activity. However, these transformants developed normally, indicating that either UDPGP is not required for development or residual synthesis of UDPGP may be sufficient for normal development.     

Molecular cloning of a cDNA complementary to a UDP-glucose pyrophosphorylase mRNA of Dictyostelium discoideum

Uridine diphosphoglucose pyrophosphorylase (UTP: -alpha-D-glucose-1-phosphate uridyltransferase, EC 2.7.7.9) is an essential enzyme for normal development of Dictyostelium discoideum and its specific activity increases 3- to 10-fold by the later stages of development. Previous experiments have shown that additional forms of the enzyme appear concomitantly with this increase and that two uridine diphosphoglucose pyrophosphorylase (UDPGP) polypeptides are immunoprecipitated from the in vitro translation products of total cellular RNA at any stage of development (B. F. Fishel, R. E. Manrow and R. P. Dottin, 1982, Dev. Biol. 92, 175-187). Using an in vitro translation-immunoprecipitation assay of UDPGP mRNA, we show that an increase in the amount of translatable mRNA is correlated with the accumulation of enzyme during development. A cDNA bank was constructed from a mRNA population that had been enriched for UDPGP mRNA by size fractionation on sucrose gradients containing methylmercuric hydroxide (C. W. Schweinfest, R. W. Kwiatkowski, and R. P. Dottin, 1982, Proc. Natl. Acad. Sci. USA 79, 4997-5000). A 1.8-Kb cDNA complementary to a UDPGP mRNA was identified after screening the bank by hybridization selection and translation. Only the mRNA encoding the higher molecular weight in vitro translation product is hybrid selected by this cDNA. In hybrid-arrested translation experiments, the coding strand of this cDNA selectively inhibits the translation of only one of the two in vitro translation products. Therefore, there are two distinct UDPGP mRNAs.     

Sequence analysis of a Dictyostelium discoideum gene coding for an active dihydroorotate dehydrogenase in yeast

A Dictyostelium discoideum DNA fragment isolated on the basis of its ability to complement the ural mutation of yeast, codes for a dihydroorotate dehydrogenase activity. The complete nucleotide sequence of this 1898 bp fragment has been determined and reveals an open reading frame capable of coding for a 369 amino acid polypeptide of molecular mass 47.000. The gene shows preferential use of codons with weak pairing forces. Eleven codons, mainly those with a G in the third position, are absent. The flanking sequences are unusually rich in A + T (80%). Several direct and inverted repeats exist in the 5' flanking sequence.     

Transfer RNA genes from Dictyostelium discoideum are frequently associated with repetitive elements and contain consensus boxes in their 5' and 3'-flanking regions.

A total of 68 different tRNA genes from the cellular slime mold Dictyostelium discoideum have been isolated and characterized. Although these tRNA genes show features common to typical nuclear tRNA genes from other organisms, several unique characteristics are apparent: (1) the 5'-proximal flanking region is very similar for most of the tRNA genes; (2) more than 80% of the tRNA genes contain an "ex-B motif" within their 3'-flanking region, which strongly resembles characteristics of the consensus sequence of a T-stem/T-loop region (B-box) of a tRNA gene; (3) probably more than 50% of the tRNA genes in certain D. discoideum strains are associated with a retrotransposon, termed DRE (Dictyostelium repetitive element), or with a transposon, termed Tdd-3 (Transposon Dictyostelium discoideum). DRE always occurs 50 (+/- 3) nucleotides upstream and Tdd-3 always occurs 100 (+/- 20) nucleotides downstream from the tRNA gene. D. discoideum tRNA genes are organized in multicopy gene families consisting of 5 to 20 individual genes. Members of a particular gene family are identical within the mature tRNA coding region while flanking sequences are idiosyncratic.     

Dictyostelium discoideum: a model system for differentiation and patterning

In Dictyostelium, development begins with the aggregation of free living amoebae, which soon become organized into a relatively simple organism with a few different cell types. Coordinated cell type differentiation and morphogenesis lead to a final fruiting body that allows the dispersal of spores. The study of these processes is having increasing impact on our understanding of general developmental mechanisms. The availability of biochemical and molecular genetics techniques has allowed the discovery of complex signaling networks which are essential for Dictyostelium development and are also conserved in other organisms. The levels of cAMP (both intracellular and extracellular) play essential roles in every stage of Dictyostelium development, regulating many different signal transduction pathways. Two-component systems, involving histidine kinases and response regulators, have been found to regulate intracellular cAMP levels and PKA during terminal differentiation. The sequence of the Dictyostelium genome is expected to be completed in less than two years. Nevertheless, the available sequences that are already being released, together with the results of expressed sequence tags (ESTs), are providing invaluable tools to identify new and interesting genes for further functional analysis. Global expression studies, using DNA microarrays in synchronous development to study temporal changes in gene expression, are presently being developed. In the near future, the application of this type of technology to the complete set of Dictyostelium genes (approximately 10,000) will facilitate the discovery of the effects of mutation of components of the signaling networks that regulate Dictyostelium development on changes in gene expression.     

The structure of the human apolipoprotein C-II gene. Electron microscopic analysis of RNA:DNA hybrids, complete nucleotide sequence, and identification of 5' homologous sequences among apolipoprotein genes

Cloned human apo-C-II cDNA was used as a hybridization probe to identify the human apo-C-II gene in a genomic library constructed in our laboratory. The isolated apo-C-II DNA was studied both by electron microscopy and by direct sequence analysis. Ultrastructural morphological analysis of RNA-DNA hybrids revealed that the apo-C-II gene had complex structures because of regions of inverted complementary sequences in and around the gene forming stem-and-loop structures which interfere with the formation of stable RNA:DNA hybrids. Extensive morphological analysis revealed a minimum of 3 intervening sequences (IVS), and their lengths were measured. Direct sequence analysis of the cloned gene confirmed the presence of 3 IVS. There are 4 Alu type sequences in IVS-I. We sequenced 4340 nucleotides which include 545 nucleotides in the 5' flanking region, the entire gene which spans 3320 nucleotides, and 475 nucleotides in the 3' flanking region which also encompasses an additional Alu sequence. The 5' end of the gene was identified by primer extension and sequencing of the primer extended cDNA. Apo-C-II mRNA structure was deduced from the cDNA sequence, the primer extension experiments, and the genomic sequence. It is 494 nucleotides in length. Its sequence differs from previously published sequences in that there are 7 additional nucleotides before the polyadenylate tail. In the 5' flanking region, nucleotides -234 to -213 encompass a GC-rich region which exhibits high homology (greater than 70%) to the 5' flanking regions of the genes of all the apolipoproteins published to date, namely, apo-A-II (-497 to -471), apo-A-I (approximately -196 to -179), apo-E (-409 to -391), and apo-C-III (approximately -116 to -103). This highly conserved region might represent some evolutionarily conserved sequences from these related genes and/or might represent a region with regulatory function.     

Identification of basal and cyclic AMP regulatory elements in the promoter of the phosphoenolpyruvate carboxykinase gene.

Promoter elements important for basal and cyclic AMP (cAMP)-regulated expression of the phosphoenolpyruvate carboxykinase (PEPCK) gene have been identified by analysis of a series of PEPCK promoter mutations in transfection experiments. Fusion genes containing wild-type and mutated PEPCK promoter sequences from -600 to +69 base pairs (bp) fused to the coding sequence for chloramphenicol acetyltransferase were studied. Internal deletion mutations that replaced specific bases with a 10-bp linker within the region from -129 bp to -18 bp of the PEPCK promoter were examined. In addition, wild-type and mutated DNA templates were used as probes in DNase I protection experiments to determine sites of protein-DNA interaction. The PEPCK promoter contains a binding site for nuclear factor 1-CAAT. Deletion of the 5' end of this binding site reduced the size of the DNase I footprint in this region but had no effect on promoter activity. In contrast, deletion or disruption of the 3' end of this binding site completely eliminated protein binding and reduced promoter activity by 50%. Deletion of core sequences of the cAMP regulatory element (CRE) resulted in loss of cAMP responsiveness and an 85% decrease in basal promoter activity, indicating that the CRE also functions as a basal stimulatory element. Mutation of the core sequence of the CRE resulted in loss of the DNase I footprint over the CRE. Internal deletions flanking the CRE showed no loss of induction by cAMP but did have reduced promoter activity. This delimits the CRE to an 18-bp region between nucleotides -100 and -82. Analysis of mutations that disrupted bases between the CRE and the initiation site identified a basal inhibitory element adjacent to a basal stimulatory element, both located just 3' of the CRE, as well as a basal stimulatory element coincident with the TATA consensus sequence centered at -27. These data demonstrate that several cis-acting elements are located within 130 nucleotides of the initiation site of the PEPCK gene and that the CRE is essential for both basal promoter activity and cAMP-regulated expression of this gene.