High survival of rabbit morulae after vitrification in an ethylene glycol-based solution by a simple method.

Rabbit morulae were exposed to a vitrification solution-modified PBS [PB1] medium containing 40% ethylene glycol + 18% Ficoll + 0.3 M sucrose (EFS) for 2, 5, or 10 min at 20 degrees C and were vitrified in liquid nitrogen. When morulae were rapidly warmed, 96% had an intact zona pellucida. When embryos were cultured after removal of the mucin coat, high proportions of them formed blastocoel (79-100%), but the percentage of embryos developed to fully expanded blastocysts decreased with increased exposure time 87%, 40%, and 17%). The survival rate of morulae vitrified after removal of the mucin coat was lower than that of mucin-intact embryos. To assess the development potential in vivo, 131 embryos were vitrified after 2 min of exposure to EFS solution; all the embryos were recovered and 120 were transferred to recipients without removal of the mucin coat, resulting in 78 (65%) full-term fetuses or young. This simple method, which yields high survival both in vitro and in vivo, will be of practical use for vitrifying rabbit embryos.     

A simple method for mouse embryo cryopreservation in a low toxicity vitrification solution, without appreciable loss of viability

Mouse morulae were exposed to solutions containing 30-50% of permeable agents (ethylene glycol, glycerol, propylene glycol) in modified phosphate-buffered saline (PB1 medium) at 20 degrees C for 20 min. A high percentage of them developed to expanded blastocysts in culture, after exposure to 30% and 40% ethylene glycol (98 and 84%, respectively), or 30% glycerol (88%). Ethylene glycol and glycerol were diluted to 30 and 40% with PB1 medium or with PB1 containing 30% Ficoll or 30% Ficoll + 0.5 M-sucrose, immersed in liquid nitrogen in straws and warmed in 20 degrees C water. Solutions containing 40% of a permeable agent with Ficoll did not crystallize during cooling or warming. Mouse morulae were exposed to 40% ethylene glycol in PB1 medium containing 30% Ficoll (EF) or PB1 medium + 30% Ficoll + 0.5 M-sucrose (EFS) for 5-20 min at 20 degrees C. EFS solution was non-toxic to the embryos during 5 min of exposure. When embryos, equilibrated in EFS solution for 2 or 5 min at 20 degrees C, were vitrified at -196 degrees C and were warmed rapidly, nearly all embryos developed in culture (97-98%), and 51% developed to live young at term after transfer. This method, which results in virtually no decrease in embryonic viability, may be of practical use for embryo preservation.     

In vitro assessment of a direct transfer vitrification procedure for bovine embryos

We developed a simple vitrification technique for bovine embryos that could permit direct transfer. Embryos were produced in-vitro by standard procedures. The base medium for cryopreservation was a chemically defined medium similar to SOF + 25 mM Hepes and 0.25% fatty acid free bovine serum albumin (FAF-BSA) (HCDM2). In experiment 1, embryos were first exposed to 3.5M ethylene glycol (V1) for 1, 2 or 3 min at room temperature (20-24 degrees C), and then moved to 7 M ethylene glycol (V2) at 4 or 20-24 degrees C and loaded in 0.25-mL straws. After 45 s in 7 M ethylene glycol, straws were placed in liquid nitrogen. Embryos that were loaded at 20-24 degrees C had higher survival rates than those loaded at 4 degrees C (P<0.05). Exposure for 1 min was best for morulae, while 3 min was best for blastocysts. In experiment 2, blastocysts were handled at 24 degrees C and exposed to two concentrations of ethylene glycol in V1 (3.5 or 5 M) followed by V2 as in experiment 1, two warming temperatures (20 or 37 degrees C) and two post-warming holding times until culture (5 or 15 min). Exposure to 5 M ethylene glycol and warming at 37 degrees C was the optimal combination of procedures, and embryos survived well after 15 min in straws if warmed at 37 degrees C. In experiment 3, ethylene glycol concentration (3, 4 or 5 M) and exposure time (0.5 or 1 min) during two-step addition of cryoprotectant were studied for bovine morulae. In experiment 4, morulae were exposed to V2 for 30 or 45 s in HCDM2 or Vigro holding medium and then held in 22-24 degrees C air or 37 degrees C water post-warming. Experiment 5 was like experiment 4 except blastocysts were used. Overall survival rates of blastocysts in experiment 5 averaged 80% of non-vitrified controls after 48 h culture. The survival rates with in vitro-produced morulae in experiments 1, 3 and 4 were unacceptable. Vitrification solutions based on Vigro tended to result in higher survival than HCDM2 for blastocysts, but not morulae. In experiment 6, the survival rate in vitro of in vivo-produced morulae and blastocysts after two-step vitrification was nearly 100%. Our vitrification technique was very effective for in vitro produced blastocysts, but not for in vitro-produced morulae.     

Vitrification of mouse oocytes and embryos at various stages of development in an ethylene glycol-based solution by a simple method

Mouse oocytes and embryos at various developmental stages were exposed directly to an ethylene glycol-based vitrification solution (EFS) for 2 or 5 minutes at 20 degrees C. They were then vitrified at -196 degrees C and were warmed rapidly. At the germinal vesicle stage, the proportion of morphologically normal oocytes was 36 to 39% if they had cumulus cells, whereas in cumulus-removed immature oocytes and in ovulated oocytes it was only 2 to 4%. This low survival was attributed to the harmful action of ethylene glycol. After fertilization, on the other hand, the post-warming survival rate of 1-cell zygotes, as assessed by cleavage to the 2-cell stage, increased markedly (62%). As the developmental stage proceeded, higher proportions of vitrified embryos developed to expanded blastocysts; the rates increased up to 77 and 80% in 2-cell and 4-cell embryos, respectively. For embryos at the 8-cell, morula and early blastocyst stages, the proportion of embryos developed after vitrification (90 to 95%) was not significantly different from that of the untreated embryos (95 to 100%) when the period of exposure to EFS solution was 2 minutes. As the blastocoel began to enlarge, however, survival began to decrease again, with rates of 79 and 57% in blastocysts and expanded blastocysts, respectively. After the cryopreserved 2-cell, 4-cell and 8-cell embryos as well as morulae and blastocysts were transferred to recipients, 43 to 57% of the recipients became pregnant, and 48 to 60% of these various stage embryos developed into live young.     

Vitrification of two-cell rat embryos derived from immature hypothyroid rdw rats by in vitro fertilization in ethylene glycol-based solutions

Two-cell embryos derived from immature rdw rats by in vitro fertilization (IVF) were vitrified in ethylene glycol-based solutions. Embryos exposed to EFS20 before being vitrified in EFS40 exhibited improved viability in vitro. All embryos exposed to EFS20 for 1-3 min before vitrification in EFS40 were morphologically normal. However, 2-3 min of exposure to EFS20 increased the number of embryos that developed beyond the four-cell stage. More embryos exposed to EFS20 for 2-3 min developed to morulae (63-64%) and blastocysts (34-38%) than those exposed for 1 min (35 and 10%, respectively). After transfer, 33% of embryos exposed to EFS20 for 3 min and vitrified in EFS40 developed to term compared to 29% of fresh embryos. Fifteen (47%) of live young were homozygous rdw and all of the others were heterozygous rats. The present study demonstrated that vitrification in EFS solution can be routinely used to cryopreserve rat two-cell IVF-embryos with no loss of viability.     

Successful vitrification of bovine blastocysts,derived by in vitro maturation and fertilization

Bovine blastocysts were produced through maturation, fertilization, and development in vitro. For vitrification, solutions designated EFS, GFS, and PFS were prepared; these were 40% ethylene glycol, 40% glycerol, and 40% propylene glycol, respectively, diluted in modified phosphate-buffered saline (PBS) containing 30% Ficoll + 0.5 M sucrose. The embryos were exposed to the solutions in one step at room temperature, kept in the solutions for various times, vitrified in liquid nitrogen, and warmed rapidly. When the embryos were vitrified in EFS solution after 1 or 2 min exposure, the postwarming survival rate, assessed by the reexpansion of the blastocoel, was 74–77%. However, when the exposure time was extended to 3 min or longer, this rate dropped to 7–0%. This reduction was attributed to the toxicity of ethylene glycol. Of the embryos vitrified in GFS solution, 53% survived when they were cooled after 1 min exposure; as the duration of the exposure increased, the survival rate increased, reaching a peak (72%) at 4 min. The rate then decreased gradually with exposure time. In PFS solution, embryos surviving after vitrification were recovered only with 1 min exposure (33%), reflecting the high toxicity of propylene glycol. After vitrification in EFS or GFS solution, two embryos were nonsurgically transferred into each of 14 recipient animals. Of the 14 recipients, ten (71%) became pregnant; two resulted in early stillbirths, four recipients delivered twins (four alive and four stillborn), and two delivered single live calves, demonstrating the effectiveness of this simple vitrification method for the cryopreservation of in-vitro-produced bovine blastocysts. © 1993 Wiley-Liss, Inc.     

Successful cryopreservation of mouse blastocysts using a new vitrification solution.

Mouse blastocysts were exposed to solutions containing four concentrations (10, 20, 30 and 40% v/v) of six permeating cryoprotectants (glycerol, ethylene glycol, propylene glycol, dimethyl sulfoxide, 1,3-butanediol and 2,3-butanediol) in phosphate-buffered saline (PBS) with calf serum (CS) at room temperature (20-22 degrees C). Blastocysts were exposed to these solutions for various periods, diluted into PBS plus CS with or without 1 mol trehalose l-1 solution and their subsequent survival in vitro was examined. Two-way anova showed a significant interaction (P < 0.01) between cryoprotectant type, concentration of cryoprotectant and method of dilution. However, no significant interaction was observed between cryoprotectant type and duration of exposure. Results suggest that cryoprotectant-induced injury to nonfrozen blastocysts is variable and depends on the cryoprotectant used. On the basis of toxicity assays, ethylene glycol was the least harmful and was combined with dimethyl sulfoxide and 1,3-butanediol to produce a new vitrification solution. Mouse blastocysts were successfully cryopreserved using a vitrification solution (designated as VSv) consisting of 20% ethylene glycol, 20% dimethyl sulfoxide and 10% 1,3-butanediol (v/v). Embryos were equilibrated in two steps, first in an equilibration solution (designated as ESv: 10% ethylene glycol, 10% dimethyl sulfoxide and 5% 1,3-butanediol; v/v) and then to VSv or one-step in VSv at different exposure times at room temperature, and then vitrified by direct plunging into liquid nitrogen. High developmental rates were obtained in vitro when the embryos were exposed to ESv and VSv for 3 and 0.5 min, respectively (96.2%) or exposed to VSv for 0.5 min (95.4%). Prolonged exposure time proved detrimental to subsequent embryo development in vitro. When vitrified warmed embryos were transferred immediately to pseudopregnant recipients, the rate of development to normal fetuses did not significantly differ from that of the nonvitrified control (two-step, 54.2 and one-step, 45.0 versus 60.0%, P > 0.05). These results suggest that the simple vitrification solution described in this study is effective for the cryopreservation of mouse blastocysts.     

Preliminary studies on the vitrification of red sea bream (Pagrus major) embryos

The objective was to identify an appropriate cryoprotectant and protocol for vitrification of red sea bream (Pagrus major) embryos. The toxicity of five single-agent cryoprotectants, dimethyl sulfoxide (DMSO), propylene glycol (PG), ethylene glycol (EG), glycerol (GLY), and methyl alcohol (MeOH), as well as nine cryoprotectant mixtures, were investigated by comparing post-thaw hatching rates. Two vitrifying protocols, a straw method and a solid surface vitrification method (copper floating over liquid nitrogen), were evaluated on the basis of post-thaw embryo morphology. Exposure to single-agent cryoprotectants (10% concentration for 15 min) was not toxic to embryos, whereas for higher concentrations (20 and 30%) and a longer duration of exposure (30 min), DMSO and PG were better tolerated than the other cryoprotectants. Among nine cryoprotectant mixtures, the combination of 20% DMSO+10% PG+10% MeOH had the lowest toxicity after exposure for 10 min or 15 min. High percentages of morphologically intact embryos, 50.6+/-16.7% (mean+/-S.D.) and 77.8+/-15.5%, were achieved by the straw vitrifying method (20.5% DMSO+15.5% acetamide+10% PG, thawing at 43 degrees C and washing in 0.5M sucrose solution for 5 min) and by the solid surface vitrification method (40% GLY, thawing at 22 degrees C and washing in 0.5M sucrose solution for 5 min). After thawing, morphological changes in the degenerated embryos included shrunken yolks and ruptured chorions. Furthermore, thawed embryos that were morphologically intact did not consistently survive incubation.     

Sheep embryo cryopreservation by vitrification and conventional freezing

The survival of ovine embryos (morulae and blastocysts) either frozen by a conventional method or vitrified was investigated in culture. In Experiment I, embryos were vitrified using a solution containing 25% propylene glycol and 25% glycerol. A group of embryos (simulated control) was processed without freezing to evaluate the toxicity of the vitrification solution. In Experiment II, embryos were exposed to a solution of PBS containing 10% glycerol and 0.25 M sucrose placed horizontally in a programmable freezer. Automatic seeding was applied at -7 degrees C in 2 positions on straws and cooled at -0.3 degrees C/min to -25 degrees C and then stored in liquid nitrogen. In vitro development rates of vitrified embryos were 12% (morulae) and 19% (blastocysts). Simulated embryos showed a higher rate of survival than embryos cryopreserved by vitrification (67 and 63%, morulae and blastocysts respectively). In conventional cooling, the blastocysts showed the highest viability percentage (67%) of all the experimental groups but these values decreased significantly in morulae (31%). Differences in temperature between straws placed in distinct positions in the freezing chamber and thermic deviation were observed when automatic seeding was applied. Embryo viability differed from 51 to 75% according the relative position of the embryos within the chamber. Survival was higher when automatic seeding was applied on the meniscus of the embryo column versus the central point of this column (65 vs 21%). The damage of both cryopreservation methods on zona pellucida integrity (27 and 35% in vitrified and conventionally frozen embryos, respectively) had no effect on the in vitro survival.     

Cryopreservation of ovine embryos: slow freezing and vitrification

Different methods for the cryopreservation of ovine embryos were evaluated in vitro (survival upon culture in vitro) and in vivo (pregnancy and lambing rates after transfer in field conditions). In the first 2 experiments, slow freezing conditions were evaluated. When glycerol and ethylene glycol were compared, no differences in the overall pregnancy rate were found (40.2 vs 51.3%), but better results were obtained with ethylene glycol than with glycerol in morulae (29.7 vs 59.4%, P < 0.05). In the second experiment, 2 methods of removing ethylene glycol were compared: a 1-step procedure using 0.5-M sucrose and a 3-step process for decreasing ethylene glycol concentration. There were no differences in the overall pregnancy rate (48.0 vs 48.0%) between the 2 methods. The last series of experiments were designed to compare 2 vitrification solutions: propylene glycol--glycerol (PG) and ethylene glycol--Ficoll 70--sucrose (EFS). There were no differences between the 2 vitrification solutions, based on the overall pregnancy rate (28.1 vs 40.0%). The vitrification technique and specially with EFS solution has resulted in good pregnancy rates. The EFS solution was particularly efficacious with morulae (55.5% pregnancy). These results demonstrate that vitrification with EFS can be used successfully for the cryopreservation of ovine embryos.     

Survival of mint shoot tips after exposure to cryoprotectant solution components

Many plant species can be cryopreserved by treating shoot tips with complex cryoprotectant solutions before rapidly cooling them to liquid nitrogen temperatures. Plant vitrification solution 2 (PVS2), a commonly selected cryoprotectant, can be lethal with extended exposure times. To determine potentially toxic combinations, we have exposed mint shoot tips to one-, two-, three-, and four-component solutions of PVS2 chemicals (30% glycerol, 15% ethylene glycol, 15% dimethyl sulfoxide, and 0.4 M sucrose) at 0 and 22 degrees C. Overall, solution exposures at 22 degrees C were more damaging than exposures at 0 degree C. Solutions with glycerol, particularly in combination with ethylene glycol and dimethyl sulfoxide, were also damaging. Cryoprotectant solutions PGluD (10% PEG8000, 10% glucose, and 10% dimethyl sulfoxide) and PVS3 (50% glycerol, 50% sucrose) were less damaging than PVS2 at 22 degrees C. When plant cryoprotectants are characterized on a toxicological and biophysical basis, less damaging cryoprotectant solutions could be developed.     

Vitrification of one-cell mouse embryos in cryotubes

Preventing intracellular ice formation is essential to cryopreserve cells. Prevention can be achieved by converting cell water into a non-crystalline glass, that is, to vitrify. The prevailing belief is that to achieve vitrification, cells must be suspended in a solution containing a high concentration of glass-inducing solutes and cooled rapidly. In this study, we vitrified 1-cell mouse embryos and examined the effect of the cooling rate, the warming rate, and the concentration of cryoprotectant on cell survival. Embryos were vitrified in cryotubes. The vitrification solutions used were EFS20, EFS30, and EFS40, which contained ethylene glycol (20, 30 and 40% v/v, respectively), Ficoll (24%, 21%, and 18% w/v, respectively) and sucrose (0.4 0.35, and 0.3 M, respectively). A 5-μl EFS solution suspended with 1-cell embryos was placed in a cryotube. After 2 min in an EFS solution at 23 °C, embryos were vitrified by direct immersion into liquid nitrogen. The sample was warmed at 34 °C/min, 4,600 °C/min and 6,600 °C/min. With EFS40, the survival was low regardless of the warming rate. With EFS30 and EFS20, survival was also low when the warming rate was low, but increased with higher warming rates, likely due to prevention of intracellular ice formation. When 1-cell embryos were vitrified with EFS20 and warmed rapidly, almost all of the embryos developed to blastocysts in vitro. Moreover, when vitrified 1-cell embryos were transferred to recipients at the 2-cell stage, 43% of them developed to term. In conclusion, we developed a vitrification method for 1-cell mouse embryos by rapid warming using cryotubes.     

Effects of equilibration time, precooling and developmental stage on the survival of mouse embryos cryopreserved by vitrification

Factorial experiments were carried out to examine the effects of equilibration time, precooling and developmental stage on the postthaw in vitro survival of vitrified mouse embryos. Eight-cell embryos, compacted morulae, or blastocysts were cryopreserved using vitrification Solution 1 (VS1; 10% glycerol + 20% propylene glycol), and vitrification Solution 2 (VS2; 25% glycerol + 25% propylene glycol) in phosphate buffered saline + 10% calf serum. Each embryo stage group was first equilibrated in VS1 for 5, 10 or 20 min and then exposed to either a precooled ( approximately 4 degrees C) or nonprecooled ( approximately 20 degrees C) VS2 in a 0.25-ml straw before they were plunged directly into liquid nitrogen. Results of this study showed an interaction between precooling, equilibration time and developmental stage which affect significantly post-thaw embryo survival (P< 0.05). High survival rates were obtained after 10 min equilibration in VS1 irrespective of the embryo developmental stage. Precooling of the VS2 significantly improved the survival mainly of blastocysts. However, eight-cell and morula-stage embryos also showed high survival rates when they were exposed to precooled VS2 after 5 min equilibration in VS1. It was further observed that morulae usually exhibit high survival rates, and vitrification conditions are more critical for early and advanced stage embryo development.     

Survival of vitrified sheep embryos in vitro and in vivo

The effects of the composition of vitrification media, the duration of exposure to the media and the stage of development were examined on the survival of vitrified Day-6 sheep embryos. Vitrification media that contained two cryoprotectants in equal molar concentrations were used. In Experiment 1, the effects of the types (glycerol + propylene glycol or glycerol + ethylene glycol) and concentrations (3.5 + 3.5 or 4.5 + 4.5 M) of cryoprotectants and the level of BSA supplementation (0.4 or 20%) were investigated in a 2 x 2 x 2 design. The embryos were exposed to vitrification media for 30 sec at 18 to 24 degrees C before vitrification. The in vitro survival rate was not affected by the level of BSA supplementation, but there was an interaction between the types and concentrations of cryoprotectants used (P<0.01). Embryos cryopreserved in mixtures of glycerol + propylene glycol survived better when the concentration of cryoprotectants was 3.5 M while the survival of embryos cryopreserved in mixtures of glycerol + ethylene glycol was higher at 4.5 M cryoprotectant concentration. In Experiments 2 and 3, the effect of the duration of exposure (15, 30, 60 or 120 sec) to vitrification media at 4 to 12 degrees C was investigated on the survival rate in vivo. Vitrification media contained 3.5 M glycerol + 3.5 M propylene glycol or 4.5 M glycerol + 4.5 M ethylene glycol in Experiments 2 and 3, respectively. The survival rate in vivo, increased when the duration of exposure to vitrification media was increased from 15 to 30 sec, but the viability declined when the duration of exposure was further increased to 60 (Experiment 3) or to 120 sec (Experiment 2). The effect of the stage of development was significant only in Experiment 1 (P = 0.032), but in all three experiments the rate of survival increased with advancing stages of development from late morulae to late blastocysts. The best result was achieved in Experiment 2, when embryos were exposed to a mixture of 3.5 M glycerol + 3.5 M propylene glycol for 30 or 60 sec. Under these conditions 52% (22 42 ) of rapidly cryopreserved sheep embryos developed into lambs. This result shows that a simple rapid procedure for the cryopreservation of sheep embryos can produce a survival rate comparable to that obtained using more complex traditional procedures.     

The effect of prefreezing the diluent portion of the straw in a step-wise vitrification process using ethylene glycol and polyvinylpyrrolidone to preserve bovine blastocysts.

A total of 678 bovine blastocysts, which had been produced by in vitro maturation, fertilization, and culture, were placed into plastic straws and were vitrified in various solutions of ethylene glycol (EG) + polyvinylpyrrolidone (PVP). Part of the straw was loaded with TCM199 medium + 0.3 M trehalose as a diluent; the diluent portions of the straw were prefrozen to either -30 or -196 degrees C. Then, the embryos suspended in the vitrification solution were pipetted into the balance of the straw and vitrified by direct immersion into liquid nitrogen. For thawing, the straws were warmed for 3 s in air and 20 s in a water bath at 39 degrees C and then agitated to mix the diluent and cryoprotectant solution for 5 min followed by culture in TCM199 + 10% FCS + 5 + microg/ml insulin + 50 microg/ml gentamycin sulfate for 72 h. Variables that were examined were the time of exposure to EG prior to vitrification, the PVP concentration, and the temperature of exposure to EG + PVP prior to vitrification. Survival and hatching rates of the blastocysts exposed to 40% EG in four steps at 4 degrees C were higher than those of embryos exposed in two steps (81.3 +/- 4.3% and 80.2 +/- 3.4% vs 67.6 +/- 4.5% and 71.5 +/- 4.7%, respectively; P < 0.05). The same indices were superior following vitrification-thawing of the blastocysts in 40% EG + 20% PVP than it was in 40% EG + 10% PVP (76.1 +/- 5.5% vs 63.7 +/- 1.8%; P < 0.05; and 61.6 +/- 6.0% vs 70.5 +/- 4.7%; P < 0.01, respectively). Exposure to the vitrification solution (40% EG + 20% PVP) at higher temperatures (37.5 degrees C vs 4 degrees C) reduced both survival and hatching rates (45.8 +/- 6.9% vs 83.9 +/- 4.4% and 41.5 +/- 1.8% vs 64.0 +/- 4.7%, respectively; P < 0.001). These results indicate that blastocysts vitrified after prefreezing the diluent portions of the straws do favor developmental competence of in vitro produced embryos.     

Birth of offspring after transfer of Mongolian gerbil (Meriones unguiculatus) embryos cryopreserved by vitrification

The Mongolian gerbil (Meriones unguiculatus) has been used as a laboratory species in many fields of research, including neurology, oncology, and parasitology. Although the cryopreservation of embryos has become a useful means to protect valuable genetic resources, its application to the Mongolian gerbil has not yet been reported. In this study, we investigated the in vitro and in vivo developmental competence of Mongolian gerbil embryos cryopreserved by vitrification. In vivo-fertilized embryos were vitrified on the day of collection using the ethylene glycol (EG)-based solutions EFS20 and EFS40, which contained 20% and 40% EG, respectively, in PB1 containing 30% (w/v) Ficoll 70 and 0.5 M sucrose. First, we compared one-step and two-step vitrification protocols. In the one-step method, the embryos were directly transferred into the vitrification solution (EFS40), whereas in the two-step method, the embryos were exposed serially to EFS20 and EFS40 and then vitrified. After liquefying (thawing), late two-cell embryos (collected on day 3) vitrified by the two-step method showed significantly better rates of in vitro development to the morula stage compared to those vitrified by the one-step method (65% vs. 5%, P < 0.0001). We then examined whether the same two-step method could be applied to early two-cell embryos (collected on day 2), four-cell embryos (day 4), morulae (day 5), and blastocysts (day 6). After liquefying, 87%-100% of the embryos were morphologically normal in all groups, and 23% and 96% developed to the compacted morula stage from early two- and four-cell embryos, respectively. After transfer into recipient females, 3% (4/123), 1% (1/102), 5% (4/73), and 10% (15/155) developed to full-term offspring from vitrified and liquefied early two-cell embryos, late two-cell embryos, morulae, and blastocysts, respectively. This demonstrates that Mongolian gerbil embryos can be safely cryopreserved using EG-based vitrification solutions.     

Vitrification of Mouse Embryos at Various Stages by Open-Pulled Straw (OPS) Method

This study was performed to pursue the optimal condition for the cryopreservation of mouse morulae by a two-step OPS method and to investigate the feasibility of the optimal condition for vitrification of embryos at other developmental stages. First, the mouse morulae were vitrified in OPS using one-step procedure—that is, embryos were vitrified after direct exposure to EDFS30 (15% ethylene glycol (EG), 15% dimethyl sulfoxide (DMSO), Ficoll and sucrose), or two-step method—that is, embryos were first pretreated in 10%E+10%D (10% EG and 10% DMSO in mPBS) for 30 sec, then exposed to EDFS30 for 15 to 60 sec, respectively. After vitrification and warming, the embryos were morphologically evaluated and assessed by their development to blastocysts, expanded/hatched blastocysts, or to term after transfer. The result showed that all the vitrified-warmed morulae had similar blastocyst rate compared to that of control (91.7% vs. 100%), and the highest developmental rate to expanded blastocysts (100%) or hatched blastocysts (62.3%) was observed when the morulae were pretreated with 10%E+10%D for 0.5 min, exposed to EDFS30 for 25 sec before vitrification and warming in 0.5 M sucrose for 5 min. After transfer, the survival rate (33.1%) in vivo of the vitrified morulae was higher (P > 0.05) than that of the fresh embryos (24.6%). Secondly, embryos at different stages were cryopreserved and thawed following the above program. Most (93.4 to 100%) of the embryos recovered after vitrification were morphologically normal at all the developmental stages. The blastocyst rates of the vitrified one-cell (52.5 to 66.7%) and the two-cell (63.3 to 68.9%) embryos were lower (P < 0.05) than those of the vitrified four-cell embryos (81.7 to 86.4%), the eight-cell embryos (90.0 to 93.3%), morulae (96.7 to 100%), and the expanded blastocysts rate (98.3 to 100.0%) of the vitrified early blastocysts. The highest survival rate in vivo of vitrified embryos were from the early blastocysts (40.4%), which was similar to that of fresh embryos (48.6%). The data demonstrate that the optimal protocol for the cryopreservation of morulae was suitable for the four-cell embryos to early blastocyst stages and that the early blastocyst stage is the most feasible stage for mouse embryo cryopreservation under our experimental conditions.     

Vitrification of mouse embryos at various stages by open-pulled straw (OPS) method

This study was performed to pursue the optimal condition for the cryopreservation of mouse morulae by a two-step OPS method and to investigate the feasibility of the optimal condition for vitrification of embryos at other developmental stages. First, the mouse morulae were vitrified in OPS using one-step procedure-that is, embryos were vitrified after direct exposure to EDFS30 (15% ethylene glycol (EG), 15% dimethyl sulfoxide (DMSO), Ficoll and sucrose), or two-step method-that is, embryos were first pretreated in 10%E + 10%D (10% EG and 10% DMSO in mPBS) for 30 sec, then exposed to EDFS30 for 15 to 60 sec, respectively. After vitrification and warming, the embryos were morphologically evaluated and assessed by their development to blastocysts, expanded/hatched blastocysts, or to term after transfer. The result showed that all the vitrified-warmed morulae had similar blastocyst rate compared to that of control (91.7% vs. 100%), and the highest developmental rate to expanded blastocysts (100%) or hatched blastocysts (62.3%) was observed when the morulae were pretreated with 10%E + 10%D for 0.5 min, exposed to EDFS30for 25 sec before vitrification and warming in 0.5 M sucrose for 5 min. After transfer, the survival rate (33.1%) in vivo of the vitrified morulae was higher (P > 0.05) than that of the fresh embryos (24.6%). Secondly, embryos at different stages were cryopreserved and thawed following the above program. Most (93.4 to 100%) of the embryos recovered after vitrification were morphologically normal at all the developmental stages. The blastocyst rates of the vitrified one-cell (52.5 to 66.7%) and the two-cell (63.3 to 68.9%) embryos were lower (P < 0.05) than those of the vitrified four-cell embryos (81.7 to 86.4%), the eight-cell embryos (90.0 to 93.3%), morulae (96.7 to 100%), and the expanded blastocysts rate (98.3 to 100.0%) of the vitrified early blastocysts. The highest survival rate in vivo of vitrified embryos were from the early blastocysts (40.4%), which was similar to that of fresh embryos (48.6%). The data demonstrate that the optimal protocol for the cryopreservation of morulae was suitable for the four-cell embryos to early blastocyst stages and that the early blastocyst stage is the most feasible stage for mouse embryo cryopreservation under our experimental conditions.     

Survival of corneal endothelium following exposure to a vitrification solution

Corneal endothelium, a monolayer of cells lining the inner surface of the cornea, is particularly susceptible to freezing injury. Ice formation damages the structural and functional integrity of the endothelium, and this results in a loss of corneal transparency. Instead of freezing, an alternative method of cryopreservation is vitrification, which avoids damage associated with ice formation. Vitrification at practicable cooling rates, however, requires exposure of tissues to very high concentrations of cryoprotectants, and this can cause damage through chemical toxicity and osmotic stress. The effects of a vitrification solution (VS1) containing 2.62 mol/liter (20.5%, w/v) dimethyl sulfoxide, 2.62 mol/liter (15.5%, w/v) acetamide, 1.32 mol/liter (10%, w/v) propane-1,2-diol, and 6% (w/v) polyethylene glycol were studied on corneal endothelium. Endothelial function was assessed by monitoring corneal thickness during 6 hr of perfusion at 35 degrees C with a Ringer solution supplemented with glutathione and adenosine. Various dilutions of the vitrification solution were introduced and removed in a stepwise manner to mitigate osmotic stress. Survival of endothelium after exposure to VS1 or a solution containing 90% of the cryoprotectant concentrations in VS1 (90% VS1) was dependent on the duration of exposure, the temperature of exposure, and the dilution protocol. The basic dilution protocol was performed at 25 degrees C: corneas were transferred from 90% VS1 or VS1 into 50% VS1 for 15 min, followed by 25% VS1 for 15 min and finally into isosmotic Ringer solution. Using this protocol, corneal endothelium survived exposure to 90% VS1 for 15 min at -5 degrees C, but 5 min in VS1 at -5 degrees C was harmful and resulted in some very large and misshapen endothelial cells. This damage was not ameliorated by using a sucrose dilution technique; but endothelial function was improved when the temperature of exposure to VS1 was reduced from -5 to -10 degrees C. Exposure to VS1 for 5 min at -5 degrees C was well tolerated, however, when the temperature of the first dilution step into 50% VS1 was reduced from 25 to 0 degree C. The large, misshapen cells were not observed under these conditions nor after exposure to VS1 at -10 degrees C. These results suggested that damage was the result of cryoprotectant toxicity rather than osmotic stress. Thus, corneal endothelium survived exposure to two solutions of cryoprotectants, namely, 90% VS1 and VS1, that were sufficiently concentrated to vitrify. Whether corneas can be cooled fast enough in these solutions to achieve vitrification and warmed fast enough to avoid devitrification remains to be determined.     

Factors affecting survival of mouse blastocysts vitrified by a mixture of ethylene glycol and dimethyl sulfoxide

The present study was conducted to determine suitable conditions for mouse blastocysts vitrified by a solution containing 25 % v/v (4.5M) ethylene glycol and 25% v/v (3.4M) dimethyl sulfoxide (VSi). In Experiment 1, blastocysts were exposed to 50% diluted VSi (50% VSi) for 10 minutes then to VSi for 0.5 minutes at room temperature (22 approximately 24 degrees C) or at 4 degrees C, followed by vitrification. The survival rates of these embryos exposed at each temperature were not significantly different. In Experiment 2, embryos were exposed directly to VSi for various time periods at room temperature and diluted in mPBS with 0.5 M sucrose without vitrification. The viability of embryos decreased after more than a 3 minute exposure. When the embryos were exposed to VSi for 0.5, 1, 1.5 and 2 minutes followed by vitrification, the survival rates were 78, 80, 76 and 50%, respectively. In Experiment 3, embryos were vitrified after exposure to 50% VSi for various time periods and then to VSi for 0.5 minutes at room temperature. One minute exposure to 50% VSi resulted in the highest survival rate. In Experiment 4 and 5, the cooling rate (from approximately 70 to approximately 2500 degrees C/minute), sucrose concentration (0, 0.5 and 1 M) of dilution solution, and dilution time (1 or 5 minutes) did not affect the viability of the vitrified embryos. Following exposure to 50% VSi for 1 minute and to VSi for 0.5 minutes at room temperature, embryos were cooled 1) at approximately 2500 degrees C/minute and diluted in 0.5 M sucrose in mPBS after warming or 2) at approximately 200 degrees C/minute and diluted in mPBS. In vivo development rates after the transfer to recipients were 38 and 42%, respectively. These values were similar to that of fresh control embryos.