Tn5-Mediated Cloning of a Genetic Region from Pseudomonas putida Involved in the Stimulation of Plant Root Elongation

Transposon (Tn5) mutagenesis was applied to Pseudomonas putida GR12-2R3, which promotes root elongation (a phenotype designated Pre) of Brassica campestris under gnotobiotic conditions. Of 3,000 Tn5 transconjugants, only one mutant that lost Pre activity but remained prototrophic and capable of plant root colonization was detected. This mutant was complemented by plasmid pRE53, which contained a 15.0-kilobase DNA insert isolated from a parental strain. The complemented mutant regained full Pre activity comparable to that of the wild type.     

Bacillus sp. mutant for improved biodegradation of Congo red: Random mutagenesis approach

This study presents the improved biodegradation of Congo red, a toxic azo dye, using mutant Bacillus sp. obtained by random mutagenesis of wild Bacillus sp. using UV and ethidium bromide. The mutants obtained were screened based on their decolorization performance and best mutants were selected for further studies. Better decolorization was observed in the initial Congo red concentration range 100–1000 mg/l for wild species whereas mutant strain was found to offer better decolorization up to 3000 mg/l. Mutant strain offered 12–30% reduction in time required for the complete decolorization by wild strain. The optimum pH and temperature were found to be 7.0 and 37 °C, respectively. Two efficient strains such as Bacillus sp. ACT 1 and Bacillus sp. ACT 2 were isolated from the various mutants obtained. Bacillus sp. ACT 2 showed improved enzymatic production and Bacillus sp. ACT 1 showed improved growth compared to wild strain. The enzyme responsible for the degradation was found to be azoreductase by SDS–PAGE and about 53% increased production of enzyme was achieved with mutant species. The experimental data were modeled using growth and substrate inhibition models.     

Benzene, toluene, and o-xylene degradation by free and immobilized P. putida F1 of postconsumer agave-fiber/polymer foamed composites

Benzene, toluene, and o-xylene (BTX) degradation by immobilized Pseudomonas putida F1 of postconsumer agave-fiber/polymer foamed-composites (AFPFC) and suspended cultures was studied under controlled conditions. Analyses using FTIR-ATR and SEM showed that P. putida F1 adhered onto the composite surface and developed a biofilm. In this sense, the AFPFC were successfully used as a support for bacterial immobilization. Both systems, immobilized and suspended cells of P. putida F1, were able to completely degrade benzene and toluene from initial concentrations of 15, 30, 60, and 90 mg l⁻¹. An inhibitory effect of the intermediary catechol from benzene degradation was observed in suspended cultures but it was not presented in the immobilized system. The degradation of o-xylene was partially accomplished in both systems. The Monod equation was used to model the experimental data obtained from the biodegradation kinetics, and they were adequately described with this model.     

Mutation of Candida tropicalis by Irradiation with a He-Ne Laser To Increase Its Ability To Degrade Phenol

Candida tropicalis isolated from acclimated activated sludge was used in this study. Cell suspensions with 5 × 10⁷ cells ml⁻¹ were irradiated by using a He-Ne laser. After mutagenesis, the irradiated cell suspension was diluted and plated on yeast extract-peptone-dextrose (YEPD) medium. Plates with approximately 20 individual colonies were selected, and all individual colonies were harvested for phenol biodegradation. The phenol biodegradation stabilities for 70 phenol biodegradation-positive mutants, mutant strains CTM 1 to 70, ranked according to their original phenol biodegradation potentials, were tested continuously during transfers. Finally, mutant strain CTM 2, which degraded 2,600 mg liter⁻¹ phenol within 70.5 h, was obtained on the basis of its capacity and hereditary stability for phenol biodegradation. The phenol hydroxylase gene sequences were cloned in wild and mutant strains. The results showed that four amino acids were mutated by irradiation with a laser. In order to compare the activity of phenol hydroxylase in wild and mutant strains, their genes were expressed in Escherichia coli BL21(DE3) and enzyme activities were spectrophotometrically determined. It was clear that the activity of phenol hydroxylase was promoted after irradiation with a He-Ne laser. In addition, the cell growth and intrinsic phenol biodegradation kinetics of mutant strain CTM 2 in batch cultures were also described by Haldane's kinetic equation with a wide range of initial phenol concentrations from 0 to 2,600 mg liter⁻¹. The specific growth and degradation rates further demonstrated that the CTM 2 mutant strain possessed a higher capacity to resist phenol toxicity than wild C. tropicalis did.     

PanB is involved in nicotine metabolism in Pseudomonas putida

A nicotine-sensitive mutant was generated from the nicotine-degrading bacterium, Pseudomonas putida strain J5, by mini-Tn5 transposon mutagenesis. This mutant was unable to grow with nicotine as the sole carbon source but could grow with glucose. Sequence analysis showed that the Tn5 transposon inserted at the site of the ketopantoate hydroxymethyltransferase gene (panB), which had 54% identity to PanB in Escherichia coli K-12. In-frame deletion of the panB gene abolished the nicotine-degrading ability of strain J5, while complementation with panB from P. putida J5 and E. coli K-12 restored the degrading activity of the mutant to the wild-type level. These results suggest that ketopantoate hydroxymethyltransferase is a crucial enzyme in nicotine metabolism in P. putida J5.     

Isolation and Characterization of Mutants of the Plant Growth-Promoting Rhizobacterium Pseudomonas putida GR12-2 That Overproduce Indoleacetic Acid

Following transposon Tn5 mutagenesis of the plant growth-promoting rhizobacterium Pseudomonas putida GR12-2, mutants that were able to grow in the presence of the tryptophan analog 5-fluorotryptophan were selected. Seven of the 50 5-fluorotryptophan-resistant mutants overproduced the phytohormone indoleacetic acid (IAA). Of these seven mutants, the highest level of IAA was observed with strain P. putida GR12-2/aux1, which produced four times the amount of indoleacetic acid synthesized by the wild-type strain. Strain P. putida GR12-2/aux1, in contrast to the wild type, lost the ability to stimulate the elongation of the roots of canola seedlings under gnotobiotic conditions. The growth rate, siderophore production, and 1-aminocyclopropane-1-carboxylate deaminase activity of mutant strain P. putida GR12-2/aux1 were identical to those of the wild-type strain. The role of IAA in the mechanism of plant growth stimulation by P. putida GR12-2 and other plant growth-promoting rhizobacteria is discussed.     

Role of Pseudomonas putida Indoleacetic Acid in Development of the Host Plant Root System

Many plant-associated bacteria synthesize the phytohormone indoleacetic acid (IAA). While IAA produced by phytopathogenic bacteria, mainly by the indoleacetamide pathway, has been implicated in the induction of plant tumors, it is not clear whether IAA synthesized by beneficial bacteria, usually via the indolepyruvic acid pathway, is involved in plant growth promotion. To determine whether bacterial IAA enhances root development in host plants, the ipdc gene that encodes indolepyruvate decarboxylase, a key enzyme in the indolepyruvic acid pathway, was isolated from the plant growth-promoting bacterium Pseudomonas putida GR12-2 and an IAA-deficient mutant constructed by insertional mutagenesis. The canola seedling primary roots from seeds treated with wild-type P. putida GR12-2 were on average 35 to 50% longer than the roots from seeds treated with the IAA-deficient mutant and the roots from uninoculated seeds. In addition, exposing mung bean cuttings to high levels of IAA by soaking them in a suspension of the wild-type strain stimulated the formation of many, very small, adventitious roots. Formation of fewer roots was stimulated by treatment with the IAA-deficient mutant. These results suggest that bacterial IAA plays a major role in the development of the host plant root system.     

Assessing biodegradation of furfuryl alcohol using <Emphasis Type="Italic">Pseudomonas putida</Emphasis> MTCC 1194 and <Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis> MTCC 1034 and its kinetics

The biodegradation of furfuryl alcohol (FA) in shake flask experiments using a pure culture of Pseudomonas putida (MTCC 1194) and Pseudomonas aeruginosa (MTCC 1034) was studied at 30 °C and pH 7.0. Experiments were performed at different FA concentrations ranging from 50 to 500 mg/l. Before carrying out the biodegradation studies, the bacterial strains were acclimatized to the concentration of 500 mg/l of FA by gradually raising 100 mg/l of FA in each step. The well acclimatized culture of P. putida and P. aeruginosa degraded about 80 and 66% of 50 mg/l FA, respectively. At higher concentration of FA, the percentage of FA degradation decreased. The purpose of this study was to determine the kinetics of biodegradation of FA by measuring biomass growth rates and concentration of FA as a function of time. Substrate inhibition was calculated from experimental growth parameters using the Haldane equation. Data for P. putida were determined as µ _max ?=?0.23 h^?1, K _s ?=?23.93 mg/l and K _i ?=?217.1 mg/l and for P. aeruginosa were determined as µ _max ?=?0.13 h^?1, K _s ?=?21.3 mg/l and K _i ?=?284.9 mg/l. The experimental data were fitted in Haldane, Aiba and Edwards inhibition models.     

SEA domain autoproteolysis accelerated by conformational strain: mechanistic aspects

A subclass of SEA (sea urchin sperm protein, enterokinase, and agrin) domain proteins undergoes autoproteolysis between glycine and serine in a conserved G^− 1S^+ 1VVV motif to generate stable heterodimers. Autoproteolysis has been suggested to involve only the intramolecular catalytic action of the conserved serine hydroxyl in combination with conformational strain of the glycine-serine peptide bond. We conducted a number of experiments and simulations on the SEA domain from the MUC1 mucin to test this mechanism. Alanine-scanning mutagenesis of polar residues in the vicinity of the cleavage site demonstrates that only the nucleophile at position + 1 is required for efficient proteolysis. Molecular modeling shows that an uncleaved trans peptide is incompatible with the native heterodimeric structure, resulting in disruption of secondary structure elements and distortion of the scissile peptide bond. Insertion of glycine residues (to obtain G_nG^− 1S^+ 1VVV motifs) appears to relieve strain, and autoproteolysis is 100 times slower in a 1G (n = 1) mutant and not measurable in 2G and 4G mutants. Removal of the catalytic serine hydroxyl hampers cleavage considerably, but measurable autoproteolysis of this S1098A mutant still proceeds in the presence of strain alone. The uncleaved SEA precursor populates interconverting partially folded conformations, and autoproteolysis coincides with adoption of proper β-sheet secondary structure and completed folding. Molecular dynamics simulations of the precursor show that the serine hydroxyl and the preceding glycine carbonyl carbon can be in van der Waals contact at the same time as the scissile peptide bond becomes strained. These observations are all consistent with autoproteolysis accelerated by N → O acyl shift and conformational strain imposed upon protein folding in a reaction for which the free-energy barrier is decreased by substrate destabilization rather than by transition-state stabilization. The energetics of this coupled folding and autoproteolysis mechanism is accounted for in an accompanying article.     

Inactivation of Isocitrate Lyase Leads to Increased Production of Medium-Chain-Length Poly(3-Hydroxyalkanoates) in Pseudomonas putida

Medium-chain-length (mcl) poly(3-hydroxyalkanoates) (PHAs) are storage polymers that are produced from various substrates and accumulate in Pseudomonas strains belonging to rRNA homology group I. In experiments aimed at increasing PHA production in Pseudomonas strains, we generated an mcl PHA-overproducing mutant of Pseudomonas putida KT2442 by transposon mutagenesis, in which the aceA gene was knocked out. This mutation inactivated the glyoxylate shunt and reduced the in vitro activity of isocitrate dehydrogenase, a rate-limiting enzyme of the citric acid cycle. The genotype of the mutant was confirmed by DNA sequencing, and the phenotype was confirmed by biochemical experiments. The aceA mutant was not able to grow on acetate as a sole carbon source due to disruption of the glyoxylate bypass and exhibited two- to fivefold lower isocitrate dehydrogenase activity than the wild type. During growth on gluconate, the difference between the mean PHA accumulation in the mutant and the mean PHA accumulation in the wild-type strain was 52%, which resulted in a significant increase in the amount of mcl PHA at the end of the exponential phase in the mutant P. putida KT217. On the basis of a stoichiometric flux analysis we predicted that knockout of the glyoxylate pathway in addition to reduced flux through isocitrate dehydrogenase should lead to increased flux into the fatty acid synthesis pathway. Therefore, enhanced carbon flow towards the fatty acid synthesis pathway increased the amount of mcl PHA that could be accumulated by the mutant.     

Bacterial Chemotaxis to Naphthalene Desorbing from a Nonaqueous Liquid

Bacterial chemotaxis has the potential to increase the rate of degradation of chemoattractants, but its influence on degradation of hydrophobic attractants initially dissolved in a non-aqueous-phase liquid (NAPL) has not been examined. We studied the effect of chemotaxis by Pseudomonas putida G7 on naphthalene mass transfer and degradation in a system in which the naphthalene was dissolved in a model NAPL. Chemotaxis by wild-type P. putida G7 increased the rates of naphthalene desorption and degradation relative to rates observed with nonchemotactic and nonmotile mutant strains. While biodegradation alone influenced the rate of substrate desorption by increasing the concentration gradient against which desorption occurred, chemotaxis created an even steeper gradient as the cells accumulated near the NAPL source. The extent to which chemotaxis affected naphthalene desorption and degradation depended on the initial bacterial and naphthalene concentrations, reflecting the influences of these variables on concentration gradients and on the relative rates of mass transfer and biodegradation. The results of this study suggest that chemotaxis can substantially increase the rates of mass transfer and degradation of NAPL-associated hydrophobic pollutants.     

In-silico-driven metabolic engineering of Pseudomonas putida for enhanced production of poly-hydroxyalkanoates

Here, we present systems metabolic engineering driven by in-silico modeling to tailor Pseudomonas putida for synthesis of medium chain length PHAs on glucose. Using physiological properties of the parent wild type as constraints, elementary flux mode analysis of a large-scale model of the metabolism of P. putida was used to predict genetic targets for strain engineering. Among a set of priority ranked targets, glucose dehydrogenase (encoded by gcd) was predicted as most promising deletion target. The mutant P. putida Δgcd, generated on basis of the computational design, exhibited 100% increased PHA accumulation as compared to the parent wild type, maintained a high specific growth rate and exhibited an almost unaffected gene expression profile, which excluded detrimental side effects of the modification. A second mutant strain, P. putida Δpgl, that lacked 6-phosphogluconolactonase, exhibited a substantially decreased PHA synthesis, as was also predicted by the model. The production potential of P. putida Δgcd was assessed in batch bioreactors. The novel strain showed an increase of the PHA yield (+80%), the PHA titer (+100%) and cellular PHA content (+50%) and revealed almost unaffected growth and diminished by-product formation. It was thus found superior in all relevant criteria towards industrial production. Beyond the contribution to more efficient PHA production processes at reduced costs that might replace petrochemical plastics in the future, the study illustrates the power of computational prediction to tailor microbial strains for enhanced biosynthesis of added-value compounds.     

Using a starch-rich mutant of Arabidopsis thaliana as feedstock for fermentative hydrogen production

A mutant plant (Arabidopsis thaliana), sex1-1 (starch excess 1-1), accumulating high starch content in leaves was created to serve as better biomass feedstock for a H₂-producing strain Clostridium butyricum CGS2, which efficiently utilizes starch for H₂ production but cannot assimilate cellulosic materials. The starch content of the mutant plant increased to 10.67 mg/fresh weight, which is four times higher than that of wild type plant. Using sex1-1 mutant plant as feedstock, C. butyricum CGS2 could produce 490.4 ml/l of H₂ with a H₂ production rate of 32.9 ml/h/l. The H₂ production performance appeared to increase with the increase in the concentration of mutant plant from 2.5 to 10 g/l. The highest H₂ to plant biomass yield was nearly 49 ml/g for the mutant plant. This study successfully demonstrated the feasibility of using a starch-rich mutant plant for more effective bioH₂ production with C. butyricum CGS2.     

Mutation of Candida tropicalis by irradiation with a He-Ne laser to increase its ability to degrade phenol

Candida tropicalis isolated from acclimated activated sludge was used in this study. Cell suspensions with 5 x 10(7) cells ml(-1) were irradiated by using a He-Ne laser. After mutagenesis, the irradiated cell suspension was diluted and plated on yeast extract-peptone-dextrose (YEPD) medium. Plates with approximately 20 individual colonies were selected, and all individual colonies were harvested for phenol biodegradation. The phenol biodegradation stabilities for 70 phenol biodegradation-positive mutants, mutant strains CTM 1 to 70, ranked according to their original phenol biodegradation potentials, were tested continuously during transfers. Finally, mutant strain CTM 2, which degraded 2,600 mg liter(-1) phenol within 70.5 h, was obtained on the basis of its capacity and hereditary stability for phenol biodegradation. The phenol hydroxylase gene sequences were cloned in wild and mutant strains. The results showed that four amino acids were mutated by irradiation with a laser. In order to compare the activity of phenol hydroxylase in wild and mutant strains, their genes were expressed in Escherichia coli BL21(DE3) and enzyme activities were spectrophotometrically determined. It was clear that the activity of phenol hydroxylase was promoted after irradiation with a He-Ne laser. In addition, the cell growth and intrinsic phenol biodegradation kinetics of mutant strain CTM 2 in batch cultures were also described by Haldane's kinetic equation with a wide range of initial phenol concentrations from 0 to 2,600 mg liter(-1). The specific growth and degradation rates further demonstrated that the CTM 2 mutant strain possessed a higher capacity to resist phenol toxicity than wild C. tropicalis did.     

Biodegradation of crystal violet by Pseudomonas putida

Crystal violet (CV), which has been extensively used as a biological stain and a commercial textile dye, is a recalcitrant molecule. A strain of Pseudomonas putida was isolated that effectively degraded CV: up to 80% of 60 μM CV as the sole carbon source, was degraded in liquid media within 1 week. Nine degradation products were isolated and identified. We propose that CV degradation occurs via a stepwise demethylation process to yield mono-, di-, tri-, tetra-, penta- and hexa-demethylated CV species.     

Carbon and Hydrogen Stable Isotope Fractionation during Aerobic Bacterial Degradation of Aromatic Hydrocarbons

¹³C/¹²C and D/H stable isotope fractionation during aerobic degradation was determined for Pseudomonas putida strain mt-2, Pseudomonas putida strain F1, Ralstonia pickettii strain PKO1, and Pseudomonas putida strain NCIB 9816 grown with toluene, xylenes, and naphthalene. Different types of initial reactions used by the respective bacterial strains could be linked with certain extents of stable isotope fractionation during substrate degradation.     

Effect of Trichloroethylene on the Competitive Behavior of Toluene-Degrading Bacteria

The influence of trichloroethylene (TCE) on a mixed culture of four different toluene-degrading bacterial strains (Pseudomonas putida mt-2, P. putida F1, P. putida GJ31, and Burkholderia cepacia G4) was studied with a fed-batch culture. The strains were competing for toluene, which was added at a very low rate (31 nmol mg of cells [dry weight]⁻¹ h⁻¹). All four strains were maintained in the mixed culture at comparable numbers when TCE was absent. After the start of the addition of TCE, the viabilities of B. cepacia G4 and P. putida F1 and GJ31 decreased 50- to 1,000-fold in 1 month. These bacteria can degrade TCE, although at considerably different rates. P. putida mt-2, which did not degrade TCE, became the dominant organism. Kinetic analysis showed that the presence of TCE caused up to a ninefold reduction in the affinity for toluene of the three disappearing strains, indicating that inhibition of toluene degradation by TCE occurred. While P. putida mt-2 took over the culture, mutants of this strain which could no longer grow on p-xylene arose. Most of them had less or no meta-cleavage activity and were able to grow on toluene with a higher growth rate. The results indicate that cometabolic degradation of TCE has a negative effect on the maintenance and competitive behavior of toluene-utilizing organisms that transform TCE.     

Improving of lipid productivity of the biodiesel promising green microalga <Emphasis Type="Italic">Chlorella pyrenoidosa</Emphasis> via low-energy ion implantation

High lipid content in microalgae is an essential parameter for adopting of microalgal biomass as a feedstock for biodiesel. Mutation is one approach to obtain desired algal strain with high lipid production. In this study, a mutant strain of Chlorella pyrenoidosa was isolated using 1.5?×?10¹⁵ ions cm^?2 s^?1 of N⁺ ion beam implantation technique, which has been widely used in mutagenesis of agricultural crops. N⁺ implantation slightly improved the growth of the mutant over the corresponding wild strain with significant increase in lipid content (32.4 % higher than the wild strain), which resulted in significant increase in lipid productivity by 35 %. In addition, ion implantation mutagenesis of C. pyrenoidosa resulted in 21.4 % decrease in total saturated fatty acids (SFAs) compared to the wild type, with a noticeable increase in polyunsaturated fatty acids (PUFAs). The increase in PUFAs was due mainly to stimulation of hexadecadienoic acid (C16:2) and octadecadienoic acid (C18:2) production. However, the SFA content of wild and mutant strains was 31.7 and 24.9 % of total fatty acids, respectively, highlighting the oxidative stability of biodiesel produced by both strains according to the European standards. Cultivation of C. pyrenoidosa mutant in selenite enrichment medium for five successive cultivation experiments showed insignificant changes in biomass productivity, lipid content, and lipid productivity alongside the study period, which confirms the genetic stability of the produced mutant. The present study confirmed the feasibility of generation of microalgae mutants with significant high lipid production using ion beam implantation.