Synthesis of glyceryl ferulate by immobilized ferulic acid esterase

Glyceryl ferulate was synthesized by the condensation of ferulic acid with glycerol using Pectinase PL “Amano” from Aspergillus niger, which contained ferulic acid esterase, to improve the water-solubility of ferulic acid. The optimum reaction medium was glycerol/0.1 M acetate buffer, pH 4.0, (98:2 v/v). The enzyme immobilized onto Chitopearl BCW3003 exhibited the highest activity among the those immobilized onto various kinds of Chitopearl BCW resins. The optimum temperature for the immobilized enzyme was 50°C, and it could be reused at least five times without a significant loss in activity for the synthesis of glyceryl ferulate in batch reaction. Storage of the reaction mixture at 25°C improved the molar fraction of glyceryl ferulate relative to the dissolved ferulic residues.     

Lipase-catalyzed preparation of mono- and diesters of ferulic acid

Lipophilic and stable derivatives of ferulic acid are required to improve its efficacy in fatty foods and to optimize its use in cosmetic and pharmaceutical preparations. We report an improved synthesis of ferulic acid monoesters (ethyl ferulate and lauryl ferulate) using immobilized lipase from Candida antarctica B (CALB) in diisopropyl ether (DIPE). Maximum yields were 89% and 85% in 200 h for ethyl and lauryl ferulate, respectively. Ethyl ferulate was further acylated with vinyl esters to form ferulate diesters. 4-Acetoxy-ethyl ferulate was obtained with the immobilized lipase from Alcaligenes sp. (QLG) with 59% yield in 72 h, whereas 4-dodecanoyloxy-ethyl ferulate (a new compound) was synthesized with 52% yield in 72 h using CALB. DIPE was the best solvent for the transesterifications. Finally, the anti-inflammatory activity of the synthesized derivatives was evaluated in vitro; the compounds bearing a dodecyl chain showed improved anti-inflammatory activity compared with short-chain esters.     

Production,partial purification and characterization of organic solvent tolerant lipase from Burkholderia multivorans V2 and its application for ester synthesis

Burkholderia multivorans V2 (BMV2) isolated from soil was found to produce an extracellular solvent tolerant lipase (6.477 U/mL). This lipase exhibited maximum stability in n-hexane retaining about 97.8% activity for 24 h. After performing statistical optimization of medium components for lipase production, a 2.2-fold (14 U/mL) enhancement in the lipase production was observed. The crude lipase from BMV2 was partially purified by ultrafiltration and gel permeation chromatography with 24.64-fold purification. The K_m and V_max values for partially purified BMV2 lipase were found to be 1.56 mM and 5.62 μmoles/mg min. The metal ions Ca²⁺, Mg²⁺ and Mn²⁺ had stimulatory effect on lipase activity, whereas Cu²⁺, Fe²⁺ and Zn²⁺ strongly inhibited the lipase activity. EDTA and PMSF at 10 mM concentration strongly inhibited the lipase activity. Non-ionic and anionic surfactants stimulated the lipase activity. BMV2 lipase was proved to be efficient in synthesis of ethyl butyrate ester under non-aqueous environment.     

Effect of Solvents and Kinetic Parameters on Synthesis of Ethyl Propionate Catalysed by Poly (AAc-co-HPMA-cl-MBAm)-Matrix-Immobilized Lipase of Pseudomonas aeruginosa BTS-2.

Summary A purified alkaline thermo-tolerant bacterial lipase from Pseudomonas aeruginosa BTS-2 was immobilized on a poly (AAc-co-HPMA-cl-MBAm) hydrogel network. The hydrogel showed approximately 95% binding efficiency for lipase (specific activity 1.96 U mg⁻¹). The immobilized enzyme achieved 65.1% conversion of ethanol and propionic acid (100 mM each) into ethyl propionate in n-nonane at 65 °C in 9 h. When alkane of C-chain length lower than n-nonane was used as the organic solvent, the conversion of ethanol and propionic acid into ethyl propionate decreased with a decrease in the log P value of alkanes. The immobilized lipase retained approximately 30% of its original catalytic activity after five cycles of reuse for esterification of ethanol and propionic acid into ethyl propionate at temperature 65 °C in 3 h. Addition of a molecular sieve (3 ?) to the reaction mixture enhanced the formation of ethyl propionate to 89.3%. Moreover, ethanol and propionic acid when taken a molar ratio of 3:1 further promoted the conversion rate to 94%. However, an increase in the molar ratio of propionic acid with respect to ethanol resulted in a decline of ethyl propionate synthesis.     

Continuous synthesis of alkyl ferulate by immobilized Candida antarctica lipase at high temperature

1-Pentyl, 1-hexyl and 1-heptyl ferulates were continuously synthesized at 60–90°C using a reactor system in which a column packed with ferulic acid powders and another column packed with immobilized Candida antarctica lipase particles were connected in series. Conversions greater than 0.9 were achieved for the synthesis of the 1-hexyl and 1-heptyl ferulates at 90°C. The system could be stably operated for the 1-heptyl ferulate synthesis at 90°C for at least two weeks.     

Lipase catalyzed reaction of L-ascorbic acid with cinnamic acid esters and substituted cinnamic acids

To perform the lipase-catalyzed synthesis of L-ascorbic acid derivatives from plant-based compounds such as cinnamic and ferulic acid under mild reaction conditions, the activities of immobilized Candida ntarctica lipase with different cinnamic acid esters and substituted cinnamic acids were compared. As a result, immobilized C. ntarctica lipase was found to prefer vinyl cinnamic acid to other esters such as allyl-, ethyl-, and isobutyl cinnamic acids as well as substituted cinnamic acids such as p-coumaric acid, caffeic acid, ferulic acid, and sinapic acid. Based on these results, large-scale synthesis of 6-O-cinnamyl-L-ascorbic acid ester was performed using immobilized C. ntarctica lipase in dry organic solvent, resulting in 68% yield (493 mg) as confirmed by ¹³C-NMR.     

A chemically modified lipase preparation for catalyzing the transesterification reaction in even highly polar organic solvents

Acylation of Pseudomonas cepacia lipase with Pyromellitic dianhydride to modify 72% of total amino groups was carried out. Different organic solvents were screened for precipitation of modified lipase. It was found that 1,2-dimethoxyethane was the best precipitant which precipitated 97% protein and complete activity. PCMC (protein coated microcrystals), CLPCMC (crosslinked protein coated microcrystals), EPROS (enzyme precipitated and rinsed with organic solvents) and pH tuned preparations of modified and unmodified lipase were prepared and used for carrying out transesterification reaction with n-octane and dimethyl formamide (DMF) as reaction medium. In n-octane, among all the preparations, CLPCMC of modified lipase gave highest rate (1970 nmol min⁻¹ mg⁻¹) as compared to unmodified pH tuned lipase (128 nmol min⁻¹ mg⁻¹). In DMF, with both 1% (v/v) and 5% (v/v) water content, CLPCMC showed highest initial rate of 0.72 and 7.2 nmol min⁻¹ mg⁻¹, respectively. Unmodified pH tuned lipase showed no activity at all in DMF with both 1% and 5% (v/v) water content.     

Improvement of the enzymatic synthesis of ethyl valerate by esterification reaction in a solvent system

The present study reports the improved enzymatic synthesis of ethyl valerate (green apple flavor) by esterification reaction of ethanol and valeric acid in heptane medium. Lipase from Thermomyces lanuginosus (TLL) was immobilized by physical adsorption on polyhydroxybutyrate (PHB) particles and used as a potential biocatalyst. The effect of certain parameters that influence the ester synthesis was evaluated by factorial design. The experimental conditions that maximized the synthesis of ethyl valerate were 30.5°C, 18% m/v of biocatalyst (TLL–PHB), absence of molecular sieves, agitation of 234?rpm, and 1,000?mM of each reactant (ethanol and valeric acid). Under these conditions, conversion percentage ≈92% after 105?min of reaction was observed. Soluble TLL was also used as biocatalyst and the highest conversion was of 82% after 120?min of reaction. Esterification reaction performed in a solvent-free system exhibited conversion of 13% after 45?min of reaction catalyzed by immobilized lipase, while the soluble lipase did not exhibit catalytic activity. The synthesis of the ester was confirmed by Fourier transform infrared spectroscopy and gas chromatography–mass spectrometry analyses. After six consecutive cycles of ethyl valerate synthesis, the prepared biocatalyst retained ≈86% of its original activity.     

A spectrophotometric transesterification-based assay for lipases in organic solvent

A new method to evaluate lipase activities in nonaqueous conditions using vinyl ester absorbance at ultraviolet (UV) wavelengths is described. The model reaction is the transesterification between vinyl stearate and pentanol in hexane at 30 °C or in decane at 50 °C. The conversion of vinyl stearate into pentyl stearate is monitored through decreasing UV absorbance at 200 nm. Six commercial lipases were tested with this method, and results were compared with gas chromatography (GC) quantification and a classical spectrophotometric method using p-nitrophenyl palmitate. Results from the new spectrophotometric assay are similar both to results from GC quantification (R² = 0.999) and to results from p-nitrophenyl palmitate (R² = 0.989). The proposed method is able to evaluate both high activity from immobilized lipases such as immobilized Candida antarctica B lipase (3060 ± 350 U g⁻¹) and low activity from crude enzymatic extracts such as Carica papaya dried latex (0.1 ± 0.04 U g⁻¹). The method has also been used to measure kinetic parameters of C. antarctica B lipase for vinyl stearate and the correlation between its synthesis activity and its concentration. The method has also proved to be effective in studying the acyl selectivity of a lipase by comparing its activities with increasing chain lengths of vinyl esters.     

Synthesis of a green polyurethane foam from a biopolyol obtained by enzymatic glycerolysis and its use for immobilization of lipase NS-40116

The use of green sources for materials synthesis has gained popularity in recent years. This work investigated the immobilization of lipase NS-40116 (Thermomyces lanuginosus lipase) in polyurethane foam (PUF) using a biopolyol obtained through the enzymatic glycerolysis between castor oil and glycerol, catalyzed by the commercial lipase Novozym 435 for the PUF formation. The reaction was performed to obtain biopolyol resulting in the conversion of 64% in mono- and diacylglycerol, promoting the efficient use of the reaction product as biopolyol to obtain polyurethane foam. The enzymatic derivative with immobilized lipase NS-40116 presented apparent density of 0.19 ± 0.03 g/cm³ and an immobilization yield was 94 ± 4%. Free and immobilized lipase NS-40116 were characterized in different solvents (methanol, ethanol, and propanol), temperatures (20, 40, 60 and 80 °C), pH (3, 5, 7, 9 and 11) and presence of ions Na⁺, Mg⁺⁺, and Ca⁺⁺. The support provided higher stability to the enzyme, mainly when subjected to acid pH (free lipase lost 80% of relative activity after 360 h of contact, when the enzymatic derivative lost around 22%) and high-temperature free lipase lost 50% of relative activity, while the immobilized remained 95%. The enzymatic derivative was also used for esterification reactions and conversions around 66% in fatty acid methyl esters, using abdominal chicken fat as feedstock, were obtained in the first use, maintaining this high conversion until the fourth reuse, proving that the support obtained using environmentally friendly techniques is applicable.

     

Enhanced transesterification of ethyl ferulate with glycerol for preparing glyceryl diferulate using a lipase in ionic liquids as reaction medium

Glyceryl diferulate (DFG) is a water-soluble ester of ferulic acid. A novel ionic liquid (IL) system for enzymatic transesterification of ethyl ferulate (EF) with glycerol to produce DFG was developed. Of three ILs with different anions (BF₄ ^?, PF₆ ^? and TF₂N^?) and cations (BDMIM, OMIM, HMIM, BMIM, and EMIM), EMIMTF₂N proved the best using a commercial lipase. It had a significant protective effect against thermal inactivation of the enzyme. High EF conversion (~100 %) and DFG yield (45 %) were achieved using 45 mg enzyme/ml; temperature, 70 °C; reaction time, 12 h.     

Enzymatic conversion of sunflower oil to biodiesel in a solvent-free system: Process optimization and the immobilized system stability

The feasibility of using the commercial immobilized lipase from Candida antarctica (Novozyme 435) to synthesize biodiesel from sunflower oil in a solvent-free system has been proved. Using methanol as an acyl acceptor and the response surface methodology as an optimization technique, the optimal conditions for the transesterification has been found to be: 45 ^oC, 3% of enzyme based on oil weight, 3:1 methanol to oil molar ratio and with no added water in the system. Under these conditions, >99% of oil conversion to fatty acid methyl ester (FAME) has been achieved after 50 h of reaction, but the activity of the immobilized lipase decreased markedly over the course of repeated runs. In order to improve the enzyme stability, several alternative acyl acceptors have been tested for biodiesel production under solvent-free conditions. The use of methyl acetate seems to be of great interest, resulting in high FAME yield (95.65%) and increasing the half-life of the immobilized lipase by about 20.1 times as compared to methanol. The reaction has also been verified in the industrially feasible reaction system including both a batch stirred tank reactor and a packed bed reactor. Although satisfactory performance in the batch stirred tank reactor has been achieved, the kinetics in a packed bed reactor system seems to have a slightly better profile (93.6 ± 3.75% FAME yield after 8–10 h), corresponding to the volumetric productivity of 48.5 g/(dm³ h). The packed bed reactor has operated for up to 72 h with almost no loss in productivity, implying that the proposed process and the immobilized system could provide a promising solution for the biodiesel synthesis at the industrial scale.     

Enzymatic Synthesis of Cinnamic Acid Derivatives

Using Novozym 435 as catalyst, the syntheses of ethyl ferulate (EF) from ferulic acid (4-hydroxy 3-methoxy cinnamic acid) and ethanol, and octyl methoxycinnamate (OMC) from p-methoxycinnamic acid and 2-ethyl hexanol were successfully carried out in this study. A conversion of 87% was obtained within 2 days at 75 °C for the synthesis of EF. For the synthesis of OMC at 80 °C, 90% conversion can be obtained within 1 day. The use of solvent and high reaction temperature resulted in better conversion for the synthesis of cinnamic acid derivatives. Some cinnamic acid esters could also be obtained with higher conversion and shorter reaction times in comparison to other methods reported in the literature. The enzyme can be reused several times before significant activity loss was observed. Revisions requested 10 January 2006; Revisions received 17 January 2006     

Microwave-assisted enzymatic synthesis of beef tallow biodiesel

Optimal conditions for the microwave-assisted enzymatic synthesis of biodiesel have been developed by a full 2² factorial design leading to a set of seven runs with different combinations of molar ratio and temperature. The main goal was to reduce the reaction time preliminarily established by a process of conventional heating. Reactions yielding biodiesel, in which beef tallow and ethanol used as raw materials were catalyzed by lipase from Burkholderia cepacia immobilized on silica-PVA and microwave irradiations within the range of 8–15 W were performed to reach the reaction temperature. Under optimized conditions (1:6 molar ratio of beef tallow to ethanol molar ratio at 50°C) almost total conversion of the fatty acid presented in the original beef tallow was converted into ethyl esters in a reaction that required 8 h, i.e., a productivity of about 92 mg ethyl esters g⁻¹ h⁻¹. This represents an increase of sixfold for the process carried out under conventional heating. In general, the process promises low energy demand and higher biodiesel productivity. The microwave assistance speeds up the enzyme catalyzed reactions, decreases the destructive effects on the enzyme of the operational conditions such as, higher temperature, stability, and specificity to its substrate, and allows the entire reaction medium to be heated uniformly.     

Characterization of an extracellular lipase from the biocontrol fungus, Nomuraea rileyi MJ, and its toxicity toward Spodoptera litura

An extracellular lipase from Nomuraea rileyi MJ was purified 23.9-fold with 1.69% yield by ammonium sulfate precipitation followed by Sephacryl S-100 HR column chromatography. By mass spectrometry and SDS-polyacrylamide gel electrophoresis, the molecular weight of the homogenous lipase was 81 kDa. The N-terminal sequence was determined as LeuSerValGluGlnThrLysLeuSerLysLeuAlaTyrAsnAsp and it showed no homology to sequences of known lipases. The optimum pH and temperature for activity were 8.0 and 35 °C, respectively. The enzyme was stable in the pH range 7.0-9.0 and at 15-35 °C for 1 h. Higher activity was observed in the presence of surfactants, Na⁺, NH₄⁺ ions, NaN₃ and ethylenediaminetetraacetic acid (EDTA), while Co²⁺ and Cu²⁺ ions, cysteine and dithiothreitol (DTT) strongly inhibited activity. The purified lipase hydrolyzed both synthetic and natural triglycerides with maximum activity for trilaurin and coconut oil, respectively. It also hydrolyzed esters of p-nitrophenol (pNP) with highest activity for p-nitrophenyl caprate (pNPCA). The purified lipase was found to promote N. rileyi spore germination in vitro in that germination reached 98% in conidial suspensions containing purified lipase at 2.75 U. Moreover, it enhanced toxicity of N. rileyi toward Spodoptera litura larvae with mortality via topical application reaching 63.3% at 4-10 days post-treatment which calculated to be 2.7 times higher than the mortality obtained using conidial suspensions alone.     

Functionalization of chitosan by laccase-catalyzed oxidation of ferulic acid and ethyl ferulate under heterogeneous reaction conditions

Chitosan particles were functionalized with ferulic acid (FA) and ethyl ferulate (EF) as substrates using laccase from Myceliophtora thermophyla as biocatalyst. The reactions were performed with chitosan particles under an eco-friendly procedure, in a heterogeneous system at 30 °C, in phosphate buffer (50 mM, pH 7.5).The FA-chitosan derivative presented an intense yellow-orange color stable while the EF-chitosan derivative was colorless. The spectroscopic analyses indicated that the reaction products bound covalently to the free amino groups of chitosan exhibiting a novel absorbance band in the UV/Vis spectra between 300 and 350 nm, at C-2 region by the duplication of C-2 signal in the ¹³C NMR spectrum, via Schiff base bond (NC) exhibiting novel bands in the FT-IR spectrum at 1640 and 1620 cm⁻¹. Additionally, antioxidant capacities of chitosan derivatives showed that the chitosan derivatives presented improved antioxidant properties, especially for FA-chitosan derivative (EC₅₀ were 0.52 ± 0.04, 0.20 ± 0.02 mg/ml for DPPH and ABTS⁺ scavenging, respectively).     

4,5-Bis(diphenylphosphinoyl)-1,2,3-triazole ligand: Studies on metal complex formations in liquid-liquid distribution systems

The formation reactions of hydrophobic metal complexes of divalent typical element and transition metal ions with a novel chelating ligand containing N and O donor atoms, 4,5-bis(diphenylphosphinoyl)-1,2,3-triazole (L^TH), were investigated by the liquid-liquid distribution method carried out on metal ions between chloroform and aqueous solutions. The liquid-liquid distribution reaction formulae of metal ions via the formation of hydrophobic metal complexes were revealed, along with their equilibrium constants. Three types of hydrophobic mononuclear and binuclear metal complexes distributed into chloroform solutions were found, namely, ML₂ (M = Mg²⁺, Zn²⁺, Pb²⁺; L = L^T−), ML₂(HL) (M = Cd²⁺, Mn²⁺), and M₂L₃(OH) (M = Co²⁺, Ni²⁺, Cu²⁺). Linear free energy relationships were found between the equilibrium constants of the liquid-liquid distribution reactions and the stability constants of 1:1 complexes consisting of a divalent metal ion and a glycinate. These relationships suggest the chelate formation of N,O-coordination with a heterocyclic five-membered ring in the metal complexes with L^TH.     

Solvent-free synthesis of glyceryl ferulate using a commercial microbial lipase

A process was optimized for the enzymatic synthesis of glyceryl ferulate with a yield of up to 96% using a vacuum-rotary evaporation strategy under following conditions: 15 mmol glycerol, 1.5 mmol ethyl ferulate, 170 mg Candida antarctica lipase, at 60°C for 10 h and under a vacuum of 10 mm Hg. The immobilized lipase can be used 10 times.     

Mononuclear and dinuclear mechanisms for catalysis of phosphodiester cleavage by alkaline earth metal ions in aqueous solution

In biological systems, enzymes often use metal ions, especially Mg²⁺, to catalyze phosphodiesterolysis, and model aqueous studies represent an important avenue of examining the contributions of these ions to catalysis. We have examined Mg²⁺ and Ca²⁺ catalyzed hydrolysis of the model phosphodiester thymidine-5′-p-nitrophenyl phosphate (T5PNP). At 25 °C, we find that, despite their different Lewis acidities, these ions have similar catalytic ability with second-order rate constants for attack of T5PNP by hydroxide (k_OH) of 4.1 × 10⁻⁴ M⁻¹s⁻¹ and 3.7 × 10⁻⁴ M⁻¹s⁻¹ in the presence of 0.30 M Mg²⁺ and Ca²⁺, respectively, compared to 8.3 × 10⁻⁷ M⁻¹s⁻¹ in the absence of divalent metal ion. Examining the dependence of k_OH on [M²⁺] at 50 °C indicates different kinetic mechanisms with Mg²⁺ utilizing a single ion mechanism and Ca²⁺ operating by parallel single and double ion mechanisms. Association of the metal ion(s) occurs prior to nucleophilic attack by hydroxide. Comparing the k_OH values reveals a single Mg²⁺ catalyzes the reaction by 1800-fold whereas a single Ca²⁺ ion catalyzes the reaction by only 90-fold. The second Ca²⁺ provides an additional 10-fold catalysis, significantly reducing the catalytic disparity between Mg²⁺ and Ca²⁺.     

Characterisation of a thermo-alkali-stable lipase from oil-contaminated soil using a metagenomic approach

Lipases are widely used for a variety of biotechnological applications. Screening these industrial enzymes directly from environmental microorganisms is a more efficient and practical approach than conventional cultivation-dependent methods. Combined with activity-based functional screening, six clones with lipase activity were detected and a gene (termed lipZ01) isolated from a target clone with the highest lipase activity was cloned from an oil-contaminated soil-derived metagenomic library and then sequenced. Gene lipZ01 was expressed in Pichia pastoris GS115 and the molecular weight of the recombinant lipase LipZ01 was estimated by electrophoresis analysis to be approximately 50 kDa. The maximum activity of the purified lipase was 42 U/mL, and the optimum reaction temperature and pH value were 45 °C and 8.0, respectively. The enzyme was highly stable in the temperature range 35–60 °C and under alkaline conditions (pH 7–10). The presence of Ca²⁺ and Mn²⁺ ions could significantly enhance the activity of the lipase. The purified lipase preferentially hydrolysed triacylglycerols with acyl chain lengths ≥8 carbon atoms, and the conversion degree of biodiesel production was nearly 92% in a transesterification reaction using olive oil and methanol. Some attractive properties suggested that the recombinant lipase may be valuable in industrial applications.