Biological X-ray absorption spectroscopy (BioXAS): a valuable tool for the study of trace elements in the life sciences

Using X-ray absorption spectroscopy (XAS) the binding modes (type and number of ligands, distances and geometry) and oxidation states of metals and other trace elements in crystalline as well as non-crystalline samples can be revealed. The method may be applied to biological systems as a 'stand-alone' technique, but it is particularly powerful when used alongside other X-ray and spectroscopic techniques and computational approaches. In this review, we highlight how biological XAS is being used in concert with crystallography, spectroscopy and computational chemistry to study metalloproteins in crystals, and report recent applications on relatively rare trace elements utilised by living organisms and metals involved in neurodegenerative diseases.     

Hemoglobin and myoglobin embedded in dry poly(vinyl alcohol) film for X-ray absorption studies

Solid hemoprotein samples are prepared by embedding proteins in thin poly(vinyl alcohol) films. These film samples have several unique qualities: in the solid poly(vinyl alcohol) matrix, hemoproteins have the same properties as in frozen buffer solution (proven by optical absorption, ligand recombination kinetics and EXAFS); they are very stable, easy to store and resistant to radiation; damage; protein concentration can be as high as 15 mM; light transparency is as good as liquid solution samples; and they can be made as thin as 20 microns, so that 100% photolysis across a film, even with a high protein concentration, is easily achievable. The film samples are ideal for X-ray studies of optically illuminated hemoproteins.     

The X-ray absorption spectroscopy Debye-Waller factors of an iron compound and of met-myoglobin as a function of temperature

Protein dynamics can be characterized by the mean square displacements of the individual atoms of a molecule. This concept is extended to X-ray absorption spectroscopy (XAS) of proteins where the physical information in the Debye-Waller factor is in general neglected. In a first step, a procedure for the investigation of the temperature dependence of XAS spectra has been developed for a small iron compound. Subsequently, experiments have been performed on met-myoglobin. It is shown that the mean square displacements of XAS are smaller than those obtained by M?ssbauer spectroscopy and far smaller than crystallographic mean square displacements. This behavior is explained by the different sensitivity of the methods. XAS measures a relative mean square displacement between the absorbing and backscattering atoms only. A comparison with mean square displacements calculated from normal modes shows that static displacements contribute significantly. It becomes obvious that the atoms of the active center show a high correlation of their motions.     

Liquid ultraviolet matrix-assisted laser desorption/ionization -- mass spectrometry for automated proteomic analysis

We have combined several key sample preparation steps for the use of a liquid matrix system to provide high analytical sensitivity in automated ultraviolet -- matrix-assisted laser desorption/ionisation -- mass spectrometry (UV-MALDI-MS). This new sample preparation protocol employs a matrix-mixture which is based on the glycerol matrix-mixture described by Sze et al. The low-femtomole sensitivity that is achievable with this new preparation protocol enables proteomic analysis of protein digests comparable to solid-state matrix systems. For automated data acquisition and analysis, the MALDI performance of this liquid matrix surpasses the conventional solid-state MALDI matrices. Besides the inherent general advantages of liquid samples for automated sample preparation and data acquisition the use of the presented liquid matrix significantly reduces the extent of unspecific ion signals in peptide mass fingerprints compared to typically used solid matrices, such as 2,5-dihydroxybenzoic acid (DHB) or alpha-cyano-hydroxycinnamic acid (CHCA). In particular, matrix and low-mass ion signals and ion signals resulting from cation adduct formation are dramatically reduced. Consequently, the confidence level of protein identification by peptide mass mapping of in-solution and in-gel digests is generally higher.     

X-ray spectroscopy and imaging of selenium in living systems

Background

Selenium is an essential element with a rich and varied chemistry in living organisms. It plays a variety of important roles ranging from being essential in enzymes that are critical for redox homeostasis to acting as a deterrent for herbivory in hyperaccumulating plants. Despite its importance there are many open questions, especially related to its chemistry in situ within living organisms.

A method for application of samples to matrix-assisted laser desorption ionization time-of-flight targets that enhances peptide detection

Matrix-assisted laser desorption ionization time-of-flight (MALDI-TOF) mass spectrometry has become a fundamental tool for the identification and analysis of peptides and proteins. MALDI-TOF is well suited for the analysis of complex biological mixtures because samples are crystallized onto a solid support that can be washed to remove contaminants and salts prior to laser desorption. A number of approaches for immobilizing samples onto MALDI targets have been put forth. These include the use of different chemical matrices and the immobilization of samples onto different solid supports. In large part though, the preparation of MALDI targets has been an empirical exercise that often requires a unique series of conditions for every sample. Here, a simple method for the application of peptide mixtures onto MALDI targets is put forth. This method differs because peptides are added directly to a sample of nitrocellulose dissolved in acetone, allowing them to interact in solution-phase organic solvent. This solution-phase mixture is then spotted to the MALDI target and evaporated, forming a homogenous solid surface for laser desorption. This procedure is robust, highly sensitive, tolerant to detergents, and easily learned. In our hands, the method provides as much as a 10-fold enhancement to the detection of tryptic peptide fragments derived from in-gel digests.     

A non-uniform sampling approach enables studies of dilute and unstable proteins

NMR spectroscopy is a powerful method in structural and functional analysis of macromolecules and has become particularly prevalent in studies of protein structure, function and dynamics. Unique to NMR spectroscopy is the relatively low constraints on sample preparation and the high level of control of sample conditions. Proteins can be studied in a wide range of buffer conditions, e.g. different pHs and variable temperatures, allowing studies of proteins under conditions that are closer to their native environment compared to other structural methods such as X-ray crystallography and electron microscopy. The key disadvantage of NMR is the relatively low sensitivity of the method, requiring either concentrated samples or very lengthy data-acquisition times. Thus, proteins that are unstable or can only be studied in dilute solutions are often considered practically unfeasible for NMR studies. Here, we describe a general method, where non-uniform sampling (NUS) allows for signal averaging to be monitored in an iterative manner, enabling efficient use of spectrometer time, ultimately leading to savings in costs associated with instrument and isotope-labelled protein use. The method requires preparation of multiple aliquots of the protein sample that are flash-frozen and thawed just before acquisition of a short NMR experiments carried out while the protein is stable (12 h in the presented case). Non-uniform sampling enables sufficient resolution to be acquired for each short experiment. Identical NMR datasets are acquired and sensitivity is monitored after each co-added spectrum is reconstructed. The procedure is repeated until sufficient signal-to-noise is obtained. We discuss how maximum entropy reconstruction is used to process the data, and propose a variation on the previously described method of automated parameter selection. We conclude that combining NUS with iterative co-addition is a general approach, and particularly powerful when applied to unstable proteins.     

Sulfur K-edge X-ray absorption spectroscopy as an experimental probe for S-nitroso proteins

X-ray absorption spectroscopy at the sulfur K-edge (2.4-2.6keV) provides a sensitive and specific technique to identify S-nitroso compounds, which have significance in nitric oxide-based cell signaling. Unique spectral features clearly distinguish the S-nitroso-form of a cysteine residue from the sulfhydryl-form or from a methionine thioether. Comparison of the sulfur K-edge spectra of thiolate, thiol, thioether, and S-nitroso thiolate compounds indicates high sensitivity of energy positions and intensities of XAS pre-edge features as determined by the electronic environment of the sulfur absorber. A new experimental setup is being developed for reaching the in vivo concentration range of S-nitroso thiol levels in biological samples.     

A simple protocol for the production of highly deuterated proteins for biophysical studies

Highly deuterated protein samples expand the biophysics and biological tool kit by providing, among other qualities, contrast matching in neutron diffraction experiments and reduction of dipolar spin interactions from normally protonated proteins in magnetic resonance studies, impacting both electron paramagnetic resonance and NMR spectroscopy. In NMR applications, deuteration is often combined with other isotopic labeling patterns to expand the range of conventional NMR spectroscopy research in both solution and solid-state conditions. However, preparation of deuterated proteins is challenging. We present here a simple, effective, and user-friendly protocol to produce highly deuterated proteins in Escherichia coli cells. The protocol utilizes the common shaker flask growth method and the well-known pET system (which provides expression control via the T7 promotor) for large-scale recombinant protein expression. One liter expression typically yields 5 to 50 mg of highly deuterated protein. Our data demonstrate that the optimized procedure produces a comparable quantity of protein in deuterium (²H₂O) oxide M9 medium compared with that in ¹H₂O M9 medium. The protocol will enable a broader utilization of deuterated proteins in a number of biophysical techniques.     

Protein identification and quantification from riverbank grape,Vitis riparia: Comparing SDS‐PAGE and FASP‐GPF techniques for shotgun proteomic analysis

Protein sample preparation optimisation is critical for establishing reproducible high throughput proteomic analysis. In this study, two different fractionation sample preparation techniques (in‐gel digestion and in‐solution digestion) for shotgun proteomics were used to quantitatively compare proteins identified in Vitis riparia leaf samples. The total number of proteins and peptides identified were compared between filter aided sample preparation (FASP) coupled with gas phase fractionation (GPF) and SDS‐PAGE methods. There was a 24% increase in the total number of reproducibly identified proteins when FASP‐GPF was used. FASP‐GPF is more reproducible, less expensive and a better method than SDS‐PAGE for shotgun proteomics of grapevine samples as it significantly increases protein identification across biological replicates. Total peptide and protein information from the two fractionation techniques is available in PRIDE with the identifier PXD001399 ( http://proteomecentral.proteomexchange.org/dataset/PXD001399 ).     

Role of Water in Chromosome Spreading and Swelling Induced by Acetic Acid Treatment: A Ftir Spectroscopy Study

The so called chromosome preparation is a procedure consisting of three strictly connected stages that enables to obtain chromosomes of quality suitable for cytogenetic analysis. Interestingly, experimental evidence strongly suggested that chromosome spreading and swelling (key processes that allow their counting and detailed structural analysis) are induced in the last fixative-evaporation stage by the interaction, mediated by acetic acid, between water from the environmental humidity, and the cytoplasmic matrix and the chromatin. However, since a considerable variation in the quality of chromosome preparations is observed, strongly depending on the environmental conditions in which the procedure takes place, a better comprehension of the mechanisms underlying chromosome preparation is required. To this aim, here we analysed intact lymphocytes before and at each stage of the chromosome preparation protocol by Fourier transform infrared (FTIR) spectroscopy, a technique widely used for the study not only of isolated biomolecules, but also of complex biological systems, such as whole cells. Interestingly, we found that the chromosome preparation protocol induces significant structural changes of cell proteins and DNA, in particular due to the interaction with acetic acid. Moreover, noteworthy, through the monitoring of changes in the water combination band between 2300 and 1800 cm^–1, we provided evidence at molecular level of the crucial role of the bound water to the cytoplasmic matrix and to the chromatin in determining the chromosome spreading and swelling. Our FTIR results, therefore, underline the need to perform the last fixative-evaporation stage in standardized and optimized temperature and relative humidity conditions, thus providing chromosomes of high quality for the cytogenetic analysis that would lead in this way to more reliable results.Key words: Chromosome preparation, chromosome spreading and swelling, DNA conformational transition, FTIR (micro)spectroscopy, protein, DNA hydration     

Preparation and characterization of nitrilotriacetic-acid-terminated self-assembled monolayers on gold surfaces for matrix-assisted laser desorption ionization-time of flight-mass spectrometry analysis of proteins and peptides

On-target affinity capture, enrichment and purification of biomolecules improve detection of specific analytes from complex biological samples in matrix-assisted laser desorption ionization-time of flight-mass spectrometry (MALDI-TOF-MS) analysis. In this paper, we report a simple method for preparation of a self-assembled nitrilotriacetic acid (NTA) monolayer on gold surface which can be used as a MALDI-TOF-MS sample target specifically for recombinant oligohistidine-tagged proteins/peptides and phosphorylated peptides. The NTA functional groups are immobilized to the gold surface via the linkage of 1,8-octanedithiol which forms a self-assembled monolayer on gold. Characterization by X-ray photoelectron spectroscopy and MALDI analysis of the modified surface are described. The chemically modified surface shows strong affinity toward the analytes of interest, which allows effective removal of the common interferences, e.g. salts and detergents, and therefore leads to improved signal/noise ratio and detection limit. The use of the modified surface simplifies the sample preparation for MALDI analysis of these targeted analytes.     

Systematic Evaluation of Immobilized Trypsin‐Based Fast Protein Digestion for Deep and High‐Throughput Bottom‐Up Proteomics

Immobilized trypsin (IM) has been recognized as an alternative to free trypsin (FT) for accelerating protein digestion 30 years ago. However, some questions of IM still need to be answered. How does the solid matrix of IM influence its preference for protein cleavage and how well can IM perform for deep bottom‐up proteomics compared to FT? By analyzing Escherichia coli proteome samples digested with amine or carboxyl functionalized magnetic bead–based IM (IM‐N or IM‐C) or FT, it is observed that IM‐N with the nearly neutral solid matrix, IM‐C with the negatively charged solid matrix, and FT have similar cleavage preference considering the microenvironment surrounding the cleavage sites. IM‐N (15 min) and FT (12 h) both approach 9000 protein identifications (IDs) from a mouse brain proteome. Compared to FT, IM‐N has no bias in the digestion of proteins that are involved in various biological processes, are located in different components of cells, have diverse functions, and are expressed in varying abundance. A high‐throughput bottom‐up proteomics workflow comprising IM‐N‐based rapid protein cleavage and fast CZE‐MS/MS enables the completion of protein sample preparation, CZE‐MS/MS analysis, and data analysis in only 3 h, resulting in 1000 protein IDs from the mouse brain proteome.     

Matrix layer sample preparation: an improved MALDI-MS peptide analysis method for proteomic studies

The analytical performance of MALDI-MS is highly influenced by sample preparation and the choice of matrix. Here we present an improved MALDI-MS sample preparation method for peptide mass mapping and peptide analysis, based on the use of the 2,5-dihydroxybenzoic acid matrix and prestructured sample supports, termed: matrix layer (ML). This sample preparation is easy to use and results in a rapid automated MALDI-MS and MS/MS with high quality spectra acquisition. The between-spot variation was investigated using standard peptides and statistical treatment of data confirmed the improvement gained with the ML method. Furthermore, the sample preparation method proved to be highly sensitive, in the lower-attomole range for peptides, and we improved the performance of MALDI-MS/MS for characterization of phosphopeptides as well. The method is versatile for the routine analysis of in-gel tryptic digests thereby allowing for an improved protein sequence coverage. Furthermore, reliable protein identification can be achieved without the need of desalting sample preparation. We demonstrate the performance and the robustness of our method using commercially available reference proteins and automated MS and MS/MS analyses of in-gel digests from lung tissue lysate proteins separated by 2-DE.     

The Xylem Xapper: A device for preparation of powdered xylem from stems of forest trees for molecular biological investigations

The Xylem Xapper is a prototype device capable of pulverizing xylem samples from stems of forest trees to a fine powder suitable for molecular biological investigations. Freezing of stem disks and pulverizing of xylem chips take place under liquid nitrogen, ensuring maximum retention and preservation of biologically active material. A modified technique enables extraction of sufficient quantities of high-quality RNA for preparation of cDNA libraries.     

Purification and spectral characterization of seminalplasmin, an antimicrobial protein from bull semen

A new method for the purification of seminalplasmin, an antimicrobial protein from bull semen, was developed. The last step of the procedure involved preparative high performance liquid chromatography on a reversed phase column. Highly purified seminalplasmin was characterized by CD, absorption, fluorescence spectroscopy, double immunodiffusion and biological activity. Analytical ultracentrifugation revealed a molecular mass of 6300 Da. Amino-acid analysis of the protein preparation indicated the absence of sulfur-containing amino acids cysteine and methionine.     

Extraction and long‐term storage of S‐layer proteins and flagella from Lysinibacillus sphaericus NCTC 9602: Building blocks for nanotechnology

Self‐assembling surface layer (SL) proteins of bacteria have been widely studied, in particular their use as molecularly defined, 2D coatings of technical surfaces. An important prerequisite is the availability of a sufficient amount of protein. However, a detailed and optimized protocol for the complete SL extraction is so far not available. Here, we describe the complete purification and reassembly procedure of an SL protein of Lysinibacillus sphaericus NCTC 9602, starting from the cultivation of cells, the preparation and purification of SL proteins up to the long‐term storage and in vitro self‐assembly of the proteins. All crucial steps of the procedure are assessed by different microscopic techniques, such as light microscopy, atomic force microscopy, and scanning electron microscopy as well as by SDS‐PAGE as a biochemical method. We demonstrate that storage of the protein in the presence of sodium azide or upon lyophilization allows the preservation of the self‐assembly properties for at least 9 years. Additionally, we describe a method allowing the extraction of intact flagella with lengths in the range up to 4 μm. Flagella may have applications in bio‐nanotechnology, for example as templates for metallic nanowires.     

Small and Wide Angle X-Ray Scattering Studies of Biological Macromolecules in Solution

In this paper, Small and Wide Angle X-ray Scattering (SWAXS) analysis of macromolecules is demonstrated through experimentation. SWAXS is a technique where X-rays are elastically scattered by an inhomogeneous sample in the nm-range at small angles (typically 0.1 - 5°) and wide angles (typically > 5°). This technique provides information about the shape, size, and distribution of macromolecules, characteristic distances of partially ordered materials, pore sizes, and surface-to-volume ratio. Small Angle X-ray Scattering (SAXS) is capable of delivering structural information of macromolecules between 1 and 200 nm, whereas Wide Angle X-ray Scattering (WAXS) can resolve even smaller Bragg spacing of samples between 0.33 nm and 0.49 nm based on the specific system setup and detector. The spacing is determined from Bragg''s law and is dependent on the wavelength and incident angle.In a SWAXS experiment, the materials can be solid or liquid and may contain solid, liquid or gaseous domains (so-called particles) of the same or another material in any combination. SWAXS applications are very broad and include colloids of all types: metals, composites, cement, oil, polymers, plastics, proteins, foods, and pharmaceuticals. For solid samples, the thickness is limited to approximately 5 mm.Usage of a lab-based SWAXS instrument is detailed in this paper. With the available software (e.g., GNOM-ATSAS 2.3 package by D. Svergun EMBL-Hamburg and EasySWAXS software) for the SWAXS system, an experiment can be conducted to determine certain parameters of interest for the given sample. One example of a biological macromolecule experiment is the analysis of 2 wt% lysozyme in a water-based aqueous buffer which can be chosen and prepared through numerous methods. The preparation of the sample follows the guidelines below in the Preparation of the Sample section. Through SWAXS experimentation, important structural parameters of lysozyme, e.g. the radius of gyration, can be analyzed.     

Process for the integrated extraction, identification and quantification of metabolites, proteins and RNA to reveal their co-regulation in biochemical networks

A novel extraction protocol is described with which metabolites, proteins and RNA are sequentially extracted from the same sample, thereby providing a convenient procedure for the analysis of replicates as well as exploiting the inherent biological variation of independent samples for multivariate data analysis. A detection of 652 metabolites, 297 proteins and clear RNA bands in a single Arabidopsis thaliana leaf sample was validated by analysis with gas chromatography coupled to a time of flight mass spectrometer for metabolites, two-dimensional liquid chromatography coupled to mass spectrometry for proteins, and Northern blot analysis for RNA. A subset of the most abundant proteins and metabolites from replicate analysis of different Arabidopsis accessions was merged to form an integrative dataset allowing both classification of different genotypes and the unbiased analysis of the hierarchical organization of proteins and metabolites within a real biochemical network.     

The structural and topological analysis of membrane-associated polypeptides by oriented solid-state NMR spectroscopy: established concepts and novel developments

Solid-state NMR spectroscopy is a powerful technique for the investigation of membrane-associated peptides and proteins as well as their interactions with lipids, and a variety of conceptually different approaches have been developed for their study. The technique is unique in allowing for the high-resolution investigation of liquid disordered lipid bilayers representing well the characteristics of natural membranes. Whereas magic angle solid-state NMR spectroscopy follows approaches that are related to those developed for solution NMR spectroscopy the use of static uniaxially oriented samples results in angular constraints which also provide information for the detailed analysis of polypeptide structures. This review introduces this latter concept theoretically and provides a number of examples. Furthermore, ongoing developments combining solid-state NMR spectroscopy with information from solution NMR spectroscopy and molecular modelling as well as exploratory studies using dynamic nuclear polarization solid-state NMR will be presented.