Identification of a Two-Component Regulatory Pathway Essential for Mn(II) Oxidation in Pseudomonas putida GB-1

Bacterial manganese(II) oxidation has a profound impact on the biogeochemical cycling of Mn and the availability of the trace metals adsorbed to the surfaces of solid Mn(III, IV) oxides. The Mn(II) oxidase enzyme was tentatively identified in Pseudomonas putida GB-1 via transposon mutagenesis: the mutant strain GB-1-007, which fails to oxidize Mn(II), harbors a transposon insertion in the gene cumA. cumA encodes a putative multicopper oxidase (MCO), a class of enzymes implicated in Mn(II) oxidation in other bacterial species. However, we show here that an in-frame deletion of cumA did not affect Mn(II) oxidation. Through complementation analysis of the oxidation defect in GB-1-007 with a cosmid library and subsequent sequencing of candidate genes we show the causative mutation to be a frameshift within the mnxS1 gene that encodes a putative sensor histidine kinase. The frameshift mutation results in a truncated protein lacking the kinase domain. Multicopy expression of mnxS1 restored Mn(II) oxidation to GB-1-007 and in-frame deletion of mnxS1 resulted in a loss of oxidation in the wild-type strain. These results clearly demonstrated that the oxidation defect of GB-1-007 is due to disruption of mnxS1, not cumA::Tn5, and that CumA is not the Mn(II) oxidase. mnxS1 is located upstream of a second sensor histidine kinase gene, mnxS2, and a response regulator gene, mnxR. In-frame deletions of each of these genes also led to the loss of Mn(II) oxidation. Therefore, we conclude that the MnxS1/MnxS2/MnxR two-component regulatory pathway is essential for Mn(II) oxidation in P. putida GB-1.In living cells, manganese (Mn) is an essential trace element, required for enzymes such as superoxide dismutase and in photosystem II (7). In the environment, Mn cycles between a soluble reduced form [Mn(II)] and an insoluble oxidized form [Mn(III, IV)] that can adsorb other trace metals from the environment and serve as potent oxidizing agents. Thus, redox cycling of Mn has a profound effect on the bioavailability and geochemical cycling of many essential or toxic elements (40). Microorganisms, particularly bacteria, are capable of catalyzing the oxidation of Mn(II), thereby increasing the rate of formation of Mn(III, IV) by several orders of magnitude (39). Since Mn(III, IV) oxides are able to bind trace metals, the bacteria that catalyze their formation are good candidates for bioremediation of heavy metal contaminated sites (26, 39).Although bacterial Mn(II) oxidation is widespread, little is known about the physiological function of oxidation (40). The oxidation of Mn(II) to Mn(III) or Mn(IV) is thermodynamically favorable; thus, bacteria may derive energy from this reaction, although this has never been unequivocally proven (40). In addition, Mn(II) oxidation could protect cells from reactive oxygen species (4) or UV irradiation (11). Since oxidation occurs on the cell surface, the bacteria become coated with the solid Mn(IV) oxides, which may also provide protection from toxic heavy metals, predation, or phage infection (40). As a strong oxidant, Mn(IV) oxides could allow the bacteria to degrade refractory organic matter to low-molecular-weight compounds that could then be used to support bacterial growth (38). Conversely, Mn(II) oxidation may be a side reaction or the result of nonspecific interactions with cellular products (15). Identifying signals or conditions that regulate oxidation could provide some insight into the role of Mn(II) oxidation in the cell. Aside from a requirement for oxygen (28) and iron (27, 30), as well as the observation that oxidation occurs in stationary phase (23), very little is known about this regulation.The enzymes responsible for Mn(II) oxidation have been tentatively identified from some species of bacteria and in several cases the enzyme is a putative multicopper oxidase (MCO). MCOs are a family of enzymes that use four Cu ion cofactors to catalyze oxidation of diverse substrates such as metals and organic compounds (33). This family of enzymes is found in plants and fungi (laccase) and humans (ceruloplasmin), as well as in bacteria (35). Some fungi have been shown to use a laccase enzyme to oxidize Mn(II) (20). In both Leptothrix discophora SS-1 and Pedomicrobium sp. strain ACM 3067, the Mn(II)-oxidizing MCO was identified genetically (mofA [10] and moxA [31], respectively). A third MCO—MnxG—was identified both biochemically and genetically as the Mn(II) oxidase in Bacillus sp. strain SG-1 and related strains (14, 43). Recent work with the Mn(II)-oxidizing alphaproteobacterium Aurantimonas manganoxydans SI85-9A1 and Erythrobacter sp. strain SD21 has identified a second class of enzyme involved in Mn(II) oxidation: the heme-binding peroxidase named MopA (3). This class of enzyme had previously been shown to be used by fungi to oxidize Mn(II) (29), in some cases in concert with an MCO (34).Pseudomonas putida GB-1 is a Mn(II)-oxidizing bacterium (9) whose genetic tractability and ease of growth under standard laboratory conditions make it an ideal model system for studying the physiology and mechanism of Mn(II) oxidation. Consequently, several random transposon mutagenesis screens have been undertaken with this organism to identify genes required for Mn(II) oxidation. These screens have identified several categories of genes as important for oxidation or the export of the oxidase to the cell surface: the ccm operon of c-type cytochrome synthesis genes (8, 13), genes encoding components of the trichloroacetic acid (TCA) cycle and the tryptophan biosynthesis pathway (8) and genes encoding a general secretory pathway (12). The Mn(II) oxidation-defective mutant GB-1-007 has a transposon insertion in the gene cumA that encodes a putative MCO (6). Therefore, P. putida GB-1 has been thought to use a similar mechanism as L. discophora SS-1, Pedomicrobium sp. strain ACM 3067, and Bacillus sp. to oxidize Mn(II).Because the available data suggested that CumA was an MCO essential for Mn(II) oxidation, we wanted to study its function in greater detail. We were hampered in this, however, by the fact that the transposon insertion in cumA resulted in a growth defect due to its polar effect on expression of the downstream cumB gene (6). In order to assess the role of CumA in Mn(II) oxidation without the complications arising from polarity, we generated an in-frame deletion of cumA and tested the ability of the resulting ΔcumA strain to form Mn(IV) oxides. Our results showed that cumA is dispensable for Mn(II) oxidation and have instead revealed a complex two-component regulatory pathway essential for Mn(II) oxidation in P. putida GB-1.     

The Cytochrome c Maturation Operon Is Involved in Manganese Oxidation in Pseudomonas putida GB-1

A Pseudomonas putida strain, strain GB-1, oxidizes Mn²⁺ to Mn oxide in the early stationary growth phase. It also secretes a siderophore (identified as pyoverdine) when it is subjected to iron limitation. After transposon (Tn5) mutagenesis several classes of mutants with differences in Mn²⁺ oxidation and/or secretion of the Mn²⁺-oxidizing activity were identified. Preliminary analysis of the Tn5 insertion site in one of the nonoxidizing mutants suggested that a multicopper oxidase-related enzyme is involved in Mn²⁺ oxidation. The insertion site in another mutant was preliminarily identified as a gene involved in the general protein secretion pathway. Two mutants defective in Mn²⁺-oxidizing activity also secreted porphyrins into the medium and appeared to be derepressed for pyoverdine production. These strains were chosen for detailed analysis. Both mutants were shown to contain Tn5 insertions in the ccmF gene, which is part of the cytochrome c maturation operon. They were cytochrome oxidase negative and did not contain c-type cytochromes. Complementation with part of the ccm operon isolated from the wild type restored the phenotype of the parent strain. These results indicate that a functional ccm operon is required for Mn²⁺ oxidation in P. putida GB-1. A possible relationship between porphyrin secretion resulting from the ccm mutation and stimulation of pyoverdine production is discussed.In a number of studies during the last three decades it has been shown that various microbial species are able to stimulate the oxidation of Mn²⁺ through direct catalysis. These organisms produce proteinaceous macromolecules which catalyze the oxidation reaction. Manganese oxidations by a soil Arthrobacter species (24), Oceanospirillum and Vibrio strains (2, 3), Pseudomonas putida MnB1 (22, 30), Leptothrix discophora SS-1 (1, 11), and marine Bacillus strain SG-1 (23) are examples in which enzymes are most likely involved in the process. P. putida MnB1 produces a soluble protein which catalytically oxidizes Mn²⁺ in cell extracts (22). Manganese-oxidizing proteins from L. discophora SS-1 (1, 11) and from the spore coats of Bacillus strain SG-1 (43) have been identified on polyacrylamide gels. The oxidizing proteins have not been quantitatively purified or analyzed so far. In Bacillus strain SG-1, an operon containing seven genes appears to be involved in Mn²⁺ oxidation (46). One of these genes encodes a 137-kDa protein related to the family of multicopper oxidases (47). In a previous study we reported the isolation of a structural gene and its promoter postulated to be involved in Mn²⁺ oxidation in L. discophora (19). The encoded protein also contains the copper-binding signatures of multicopper oxidases. The oxidase-related proteins may represent Mn²⁺-oxidizing enzymes (44), but evidence supporting this hypothesis is still lacking.In this paper we describe a genetic analysis of Mn²⁺ oxidation in a freshwater Pseudomonas strain, strain GB-1. In a previous study (32) this strain was preliminarily identified as a Pseudomonas fluorescens strain, but more recent data (see Materials and Methods) indicate that it should be identified as a P. putida strain. When supplied with Mn²⁺ ions, the cells deposit manganese oxide around the outer membrane in the early stationary growth phase (32). They form brown colonies on Mn²⁺-containing agar. Experiments performed with cell extracts indicated that Mn²⁺ oxidation is catalyzed by a protein. The Mn²⁺-oxidizing factor was partially purified, and electrophoresis on an acrylamide gradient gel revealed oxidizing proteins with apparent molecular weights of ca. 250,000 and 180,000 (32). An additional oxidizing factor with a lower molecular weight (ca. 130,000) was identified in another study by using different isolation and electrophoretic procedures (16). It has been suggested that the Mn²⁺-oxidizing protein isolated is part of a larger complex which disintegrates into smaller fragments that retain activity (32). The protein is supposed to be located in the outer membrane of the bacteria. It has not been chemically characterized, and nothing is known about its cellular function or about the possible involvement of other cellular components, such as electron carriers, in Mn²⁺ oxidation.We used transposon mutagenesis to identify genes relevant to the Mn²⁺-oxidizing process in P. putida GB-1. One of these genes appeared to be part of the cytochrome c maturation operon. Transposon insertion in this gene not only abolished Mn²⁺ oxidation but also led to secretion of siderophores and porphyrins.An accompanying report on the involvement of the cytochrome c maturation operon in Mn²⁺ oxidation in P. putida MnB1 (14) supports our findings.     

Cr(III) Oxidation and Cr Toxicity in Cultures of the Manganese(II)-Oxidizing Pseudomonas putida Strain GB-1

Abstract

Mn oxides have long been considered the primary environmental oxidant of Cr(III), however, since most of the reactive Mn oxides in the environment are believed to be of biological origin, microorganisms may indirectly mediate Cr(III) oxidation and accelerate the rate over that seen in purely abiotic systems. In this study, we examined the ability of the Mn(II)-oxidizing bacterium, Pseudomonas putida strain GB-1, to oxidize Cr(III). Our results show that GB-1 cannot oxidize Cr(III) directly, but that in the presence of Mn(II), Cr(III) can be rapidly and completely oxidized. Growth studies suggest that in growth medium with few organics the resulting Cr(VI) may be less toxic to P. putida GB-1 than Cr(III), which is generally considered less hazardous. In addition, Cr(III) present during the growth of P. putida GB-1 appeared to cause iron stress as determined by the production of the fluorescent siderophore pyoverdine. When stressed by Fe limitation or Cr(III) toxicity, Mn(II) oxidation by GB-1 is inhibited.     

c-Type Cytochromes and Manganese Oxidation in Pseudomonas putida MnB1

Pseudomonas putida MnB1 is an isolate from an Mn oxide-encrusted pipeline that can oxidize Mn(II) to Mn oxides. We used transposon mutagenesis to construct mutants of strain MnB1 that are unable to oxidize manganese, and we characterized some of these mutants. The mutants were divided into three groups: mutants defective in the biogenesis of c-type cytochromes, mutants defective in genes that encode key enzymes of the tricarboxylic acid cycle, and mutants defective in the biosynthesis of tryptophan. The mutants in the first two groups were cytochrome c oxidase negative and did not contain c-type cytochromes. Mn(II) oxidation capability could be recovered in a c-type cytochrome biogenesis-defective mutant by complementation of the mutation.     

cumA, a Gene Encoding a Multicopper Oxidase, Is Involved in Mn2+ Oxidation in Pseudomonas putida GB-1

Pseudomonas putida GB-1-002 catalyzes the oxidation of Mn²⁺. Nucleotide sequence analysis of the transposon insertion site of a nonoxidizing mutant revealed a gene (designated cumA) encoding a protein homologous to multicopper oxidases. Addition of Cu²⁺ increased the Mn²⁺-oxidizing activity of the P. putida wild type by a factor of approximately 5. The growth rates of the wild type and the mutant were not affected by added Cu²⁺. A second open reading frame (designated cumB) is located downstream from cumA. Both cumA and cumB probably are part of a single operon. The translation product of cumB was homologous (level of identity, 45%) to that of orf74 of Bradyrhizobium japonicum. A mutation in orf74 resulted in an extended lag phase and lower cell densities. Similar growth-related observations were made for the cumA mutant, suggesting that the cumA mutation may have a polar effect on cumB. This was confirmed by site-specific gene replacement in cumB. The cumB mutation did not affect the Mn²⁺-oxidizing ability of the organism but resulted in decreased growth. In summary, our data indicate that the multicopper oxidase CumA is involved in the oxidation of Mn²⁺ and that CumB is required for optimal growth of P. putida GB-1-002.     

FTIR Spectroscopic Study of Biogenic Mn-Oxide Formation by Pseudomonas putida GB-1

Biomineralization in heterogeneous aqueous systems results from a complex association between pre-existing surfaces, bacterial cells, extracellular biomacromolecules, and neoformed precipitates. Fourier transform infrared (FTIR) spectroscopy was used in several complementary sample introduction modes (attenuated total reflectance [ATR], diffuse reflectance [DRIFT], and transmission) to investigate the processes of cell adhesion, biofilm growth, and biological Mn-oxidation by Pseudomonas putida strain GB-1. Distinct differences in the adhesive properties of GB-1 were observed upon Mn oxidation. No adhesion to the ZnSe crystal surface was observed for planktonic GB-1 cells coated with biogenic MnO _x , whereas cell adhesion was extensive and a GB-1 biofilm was readily grown on ZnSe, CdTe, and Ge crystals prior to Mn-oxidation. IR peak intensity ratios reveal changes in biomolecular (carbohydrate, phosphate, and protein) composition during biologically catalyzed Mn-oxidation. In situ monitoring via ATR-FTIR of an active GB-1 biofilm and DRIFT data revealed an increase in extracellular protein (amide I and II) during Mn(II) oxidation, whereas transmission mode measurements suggest an overall increase in carbohydrate and phosphate moieties. The FTIR spectrum of biogenic Mn oxide comprises Mn-O stretching vibrations characteristic of various known Mn oxides (e.g., “acid” birnessite, romanechite, todorokite), but it is not identical to known synthetic solids, possibly because of solid-phase incorporation of biomolecular constituents. The results suggest that, when biogenic MnO _x accumulates on the surfaces of planktonic cells, adhesion of the bacteria to other negatively charged surfaces is hindered via blocking of surficial proteins.     

cumA, a gene encoding a multicopper oxidase, is involved in Mn2+ oxidation in Pseudomonas putida GB-1

Pseudomonas putida GB-1-002 catalyzes the oxidation of Mn2+. Nucleotide sequence analysis of the transposon insertion site of a nonoxidizing mutant revealed a gene (designated cumA) encoding a protein homologous to multicopper oxidases. Addition of Cu2+ increased the Mn2+-oxidizing activity of the P. putida wild type by a factor of approximately 5. The growth rates of the wild type and the mutant were not affected by added Cu2+. A second open reading frame (designated cumB) is located downstream from cumA. Both cumA and cumB probably are part of a single operon. The translation product of cumB was homologous (level of identity, 45%) to that of orf74 of Bradyrhizobium japonicum. A mutation in orf74 resulted in an extended lag phase and lower cell densities. Similar growth-related observations were made for the cumA mutant, suggesting that the cumA mutation may have a polar effect on cumB. This was confirmed by site-specific gene replacement in cumB. The cumB mutation did not affect the Mn2+-oxidizing ability of the organism but resulted in decreased growth. In summary, our data indicate that the multicopper oxidase CumA is involved in the oxidation of Mn2+ and that CumB is required for optimal growth of P. putida GB-1-002.     

Propane and n-Butane Oxidation by Pseudomonas putida GPo1

Propane and n-butane inhibit methyl tertiary butyl ether oxidation by n-alkane-grown Pseudomonas putida GPo1. Here we demonstrate that these gases are oxidized by this strain and support cell growth. Both gases induced alkane hydroxylase activity and appear to be oxidized by the same enzyme system used for the oxidation of n-octane.     

Sublethal nickel toxicity shuts off manganese oxidation and pellicle biofilm formation in Pseudomonas putida GB-1

In sediments, the bioavailability and toxicity of Ni are strongly influenced by its sorption to manganese (Mn) oxides, which largely originate from the redox metabolism of microbes. However, microbes are concurrently susceptible to the toxic effects of Ni, which establishes complex interactions between toxicity and redox processes. This study measured the effect of Ni on growth, pellicle biofilm formation and oxidation of the Mn-oxidizing bacteria Pseudomonas putida GB-1. In liquid media, Ni exposure decreased the intrinsic growth rate but allowed growth to the stationary phase in all intermediate treatments. Manganese oxidation was 67% less than control for bacteria exposed to 5 μM Ni and completely ceased in all treatments above 50 μM. Pellicle biofilm development decreased exponentially with Ni concentration (maximum 92% reduction) and was replaced by planktonic growth in higher Ni treatments. In solid media assays, growth was unaffected by Ni exposure, but Mn oxidation completely ceased in treatments above 10 μM of Ni. Our results show that sublethal Ni concentrations substantially alter Mn oxidation rates and pellicle biofilm development in P. putida GB-1, which has implications for toxic metal bioavailability to the entire benthic community and the environmental consequences of metal contamination.     

Intracellular peptide hydrolysis by Pseudomonas putida and Pseudomonas maltophilia.

Amino acids liberated by peptidase hydrolysis of di- and oligopeptides by Pseudomonas putida were measured by trinitrobenzenesulphonate assay and high voltage electrophoresis or paper chromatography followed by ninhydrin spray. Intact bacteria or periplasmic contents released by lysozyme treatment did not hydrolyse peptides. Subcellular fractionation showed that glycylmethionine peptidase activity was cytoplasmic. This enzyme had a Km of 2 mM, and was stimulated fivefold by I mM-Co2+. Crude peptidase extract did not cleave peptides with D-residues, acylated N-terminal amino groups or N-methylated peptide bonds but otherwise showed a wide specificity. Di- or tripeptides with blocked C-terminus were hydrolysed. Leucylleucine (12 mM) and leucylglycylglycine (10 mM) did not compete with glycylmethionine (1-2 mM) and glycylmethionylglycine (1-0 mM), respectively, for hydrolysis. Pseudomonas maltophilia also contained peptidase activity (0-84 mumol amino acid released from glycylmethionylglycine/min/mg protein). Peptidases of both P. putida and P. maltophilia were constitutive.     

Identification of a novel Gsp-related pathway required for secretion of the manganese-oxidizing factor of Pseudomonas putida strain GB-1

The manganese-oxidizing factor of Pseudomonas putida strain GB-1 is associated with the outer membrane. One of the systems of protein transport across the outer membrane is the general secretory pathway (Gsp). The gsp genes are called xcp in Pseudomonas species. In a previous study, it was shown that mutation of the prepilin peptidase XcpA and of a homologue of the pseudopilin XcpT inhibited transport of the factor. In the present study, we describe the genomic region flanking the xcpT homologue (designated xcmT1). We show that xcmT1 is part of a two-gene operon that includes an xcpS homologue (designated xcmS). No other xcp-like genes are present in the regions flanking the xcmT1/xcmS cluster. We also characterized the site of transposon insertion of another transport mutant of P. putida GB-1. This insertion appeared to be located in a gene (designated xcmX) possibly encoding another pseudopilin-related protein. This xcmX is clustered with two other xcpT-related genes (designated xcmT2 and xcmT3) on one side and homologues of three csg genes (designated csmE, csmF and csmG) on the other side. The csg genes are involved in production of aggregative fibres in Escherichia coli and Salmonella typhimurium. A search for XcmX homologues revealed that the recently published genome of Ralstonia solanacearum and the unannotated genome of P. putida KT2440 contain comparable gene clusters with xcmX and xcp homologues that are different from the well-described 'regular'xcp/gsp clusters. They do contain xcpR and xcpQ homologues but, for example, homologues of xcpP, Y and Z are lacking. The results suggest a novel Xcp-related system for the transport of manganese-oxidizing enzymes to the cell surface.     

Regiochemistry of Camphor Analog Oxidation by Pseudomonas putida

Pseudomonas putida cooxidized norcamphor and pericyclocamphanone to hydroxylated and lactonized products during growth on camphor. Norcamphor was hydroxylated at the 5 position, similar to the corresponding process in camphor, but pericyclocamphanone was oxidized at the 6 position. We conclude that the regiochemistry of the hydroxylation may be substrate controlled.     

Oxidation of n-alkanes: Growth of Pseudomonas putida

Summary The induction of alkane hydroxylase activity was investigated in two strains of Pseudomonas putida with a view to the production of primary alcohols. n-Nonanol production rates (16.0 mol/g dry wt/h) with an alcohol dehydrogenase negative mutant P. putida PpS173 were considerably lower than might be expected from the growth of a wild type on n-alkane. Production of cells by fed-batch culture on n-nonane, with a specific alkane hydroxylase activity of 3.9 mmol/g/h, was considered most suitable for isolation of the alkane hydroxylase.     

Cobalt(II) Oxidation by Biogenic Mn Oxide Produced by Pseudomonas sp. Strain NGY-1

Oxidation of Co by Mn oxide has been investigated using abiotically synthesized Mn oxide. However, oxidation of Co by biogenic Mn oxide is not well known. In this study, we isolated a Mn-oxidizing bacterium (Pseudomonas sp.), designated as strain NGY-1, from stream water. Sorption experiments on Co were carried out using biogenic Mn oxide produced by strain NGY-1. Similar sorption experiments were also conducted using a synthetic analogue of δ-MnO₂. Sorption of Co on δ-MnO₂ was faster and stronger than that on biogenic Mn oxide, which was possibly due to their structural difference and/or the presence of bacterial cells in biogenic Mn oxide. X-ray absorption near-edge structure spectra clearly demonstrated that Co was oxidized from the divalent to the trivalent state on biogenic Mn and δ-MnO₂. The oxidation property of both the biogenic Mn oxide and δ-MnO₂ was stronger under circumneutral conditions than under acidic conditions. Linear combination fitting using divalent and trivalent Co reference materials suggested that ～90% of Co was oxidized at pH ～ 6, whereas ～80% was oxidized at pH ～ 3. Oxidation properties of the biogenic Mn oxide and δ-MnO₂ were similar, but Co(II) oxidation by biogenic Mn oxide was slower than that by δ-MnO₂. The difference of Co oxidation may be caused by the coexisting bacterial cells or structural differences in the Mn oxides.

Supplemental materials are available for this article. Go to the publisher's online edition of Geomicrobiology Journal to view the supplemental file.     

Oxidation of substituted phenols by Pseudomonas putida F1 and Pseudomonas sp. strain JS6

The biodegradation of benzene, toluene, and chlorobenzenes by Pseudomonas putida involves the initial conversion of the parent molecules to cis-dihydrodiols by dioxygenase enzyme systems. The cis-dihydrodiols are then converted to the corresponding catechols by dihydrodiol dehydrogenase enzymes. Pseudomonas sp. strain JS6 uses a similar system for growth on toluene or dichlorobenzenes. We tested the wild-type organisms and a series of mutants for their ability to transform substituted phenols after induction with toluene. When grown on toluene, both wild-type organisms converted methyl-, chloro-, and nitro-substituted phenols to the corresponding catechols. Mutant strains deficient in dihydrodiol dehydrogenase or catechol oxygenase activities also transformed the phenols. Oxidation of phenols was closely correlated with the induction and activity of the toluene dioxygenase enzyme system.     

Oxidation of an inhibitory substrate by washed cells (oxidation of phenol by Pseudomonas putida)

The specific uptake rate of phenol by washed cells of Pseudomonas putida grown on phenol in steady-state continuous culture at various dilution rates was studied. The Monod-Haldane-type equation was applied to fit the data and the best kinetic parameters were determined by nonlinear least-squares techniques. The values of the kinetic parameters were found to increase monotonically with the phenol concentration in the original chemostat. The relations between the values of kinetic parameters and phenol concentration in the chemostat were described by empirical equations. Then the equation governing the instant uptake of phenol by microorganisms in chemostat in the high conversion range of phenol was proposed. This equation together with the mass balance equations can be used to determine the stability range of continuous stirred tank biochemical reactors (CSTBR) utilizing phenol.     

Oxidation of substituted phenols by Pseudomonas putida F1 and Pseudomonas sp. strain JS6.

The biodegradation of benzene, toluene, and chlorobenzenes by Pseudomonas putida involves the initial conversion of the parent molecules to cis-dihydrodiols by dioxygenase enzyme systems. The cis-dihydrodiols are then converted to the corresponding catechols by dihydrodiol dehydrogenase enzymes. Pseudomonas sp. strain JS6 uses a similar system for growth on toluene or dichlorobenzenes. We tested the wild-type organisms and a series of mutants for their ability to transform substituted phenols after induction with toluene. When grown on toluene, both wild-type organisms converted methyl-, chloro-, and nitro-substituted phenols to the corresponding catechols. Mutant strains deficient in dihydrodiol dehydrogenase or catechol oxygenase activities also transformed the phenols. Oxidation of phenols was closely correlated with the induction and activity of the toluene dioxygenase enzyme system.     

Transmissible Plasmid Coding Early Enzymes of Naphthalene Oxidation in Pseudomonas putida

The capacity of Pseudomonas putida PpG7 (ATCC 17,485) to grow on naphthalene, phenotype Nah(+), is lost spontaneously, and the frequency is increased by treatment with mitomycin C. The Nah(+) growth character can be transferred to cured or heterologous fluorescent pseudomonads lacking this capacity by conjugation, or between phage pf16-sensitive strains by transduction. After mutagenesis, strains can be selected with increased donor capacity in conjugation. Clones which use naphthalene grow on salicylate and carry catechol 2,3-oxygenase, the initial enzyme of the aromatic alpha-keto acid pathway, whereas cured strains grow neither on salicylate nor naphthalene and lack catechol 2,3-oxygenase, but retain catechol 1,2-oxygenase and the aromatic beta-keto adipate pathway enzymes.     

Oxidation of methyl tert-butyl ether by alkane hydroxylase in dicyclopropylketone-induced and n-octane-grown Pseudomonas putida GPo1

The alkane hydroxylase enzyme system in Pseudomonas putida GPo1 has previously been reported to be unreactive toward the gasoline oxygenate methyl tert-butyl ether (MTBE). We have reexamined this finding by using cells of strain GPo1 grown in rich medium containing dicyclopropylketone (DCPK), a potent gratuitous inducer of alkane hydroxylase activity. Cells grown with DCPK oxidized MTBE and generated stoichiometric quantities of tert-butyl alcohol (TBA). Cells grown in the presence of DCPK also oxidized tert-amyl methyl ether but did not appear to oxidize either TBA, ethyl tert-butyl ether, or tert-amyl alcohol. Evidence linking MTBE oxidation to alkane hydroxylase activity was obtained through several approaches. First, no TBA production from MTBE was observed with cells of strain GPo1 grown on rich medium without DCPK. Second, no TBA production from MTBE was observed in DCPK-treated cells of P. putida GPo12, a strain that lacks the alkane-hydroxylase-encoding OCT plasmid. Third, all n-alkanes that support the growth of strain GPo1 inhibited MTBE oxidation by DCPK-treated cells. Fourth, two non-growth-supporting n-alkanes (propane and n-butane) inhibited MTBE oxidation in a saturable, concentration-dependent process. Fifth, 1,7-octadiyne, a putative mechanism-based inactivator of alkane hydroxylase, fully inhibited TBA production from MTBE. Sixth, MTBE-oxidizing activity was also observed in n-octane-grown cells. Kinetic studies with strain GPo1 grown on n-octane or rich medium with DCPK suggest that MTBE-oxidizing activity may have previously gone undetected in n-octane-grown cells because of the unusually high K(s) value (20 to 40 mM) for MTBE.     

Oxidation of Methyl tert-Butyl Ether by Alkane Hydroxylase in Dicyclopropylketone-Induced and n-Octane-Grown Pseudomonas putida GPo1

The alkane hydroxylase enzyme system in Pseudomonas putida GPo1 has previously been reported to be unreactive toward the gasoline oxygenate methyl tert-butyl ether (MTBE). We have reexamined this finding by using cells of strain GPo1 grown in rich medium containing dicyclopropylketone (DCPK), a potent gratuitous inducer of alkane hydroxylase activity. Cells grown with DCPK oxidized MTBE and generated stoichiometric quantities of tert-butyl alcohol (TBA). Cells grown in the presence of DCPK also oxidized tert-amyl methyl ether but did not appear to oxidize either TBA, ethyl tert-butyl ether, or tert-amyl alcohol. Evidence linking MTBE oxidation to alkane hydroxylase activity was obtained through several approaches. First, no TBA production from MTBE was observed with cells of strain GPo1 grown on rich medium without DCPK. Second, no TBA production from MTBE was observed in DCPK-treated cells of P. putida GPo12, a strain that lacks the alkane-hydroxylase-encoding OCT plasmid. Third, all n-alkanes that support the growth of strain GPo1 inhibited MTBE oxidation by DCPK-treated cells. Fourth, two non-growth-supporting n-alkanes (propane and n-butane) inhibited MTBE oxidation in a saturable, concentration-dependent process. Fifth, 1,7-octadiyne, a putative mechanism-based inactivator of alkane hydroxylase, fully inhibited TBA production from MTBE. Sixth, MTBE-oxidizing activity was also observed in n-octane-grown cells. Kinetic studies with strain GPo1 grown on n-octane or rich medium with DCPK suggest that MTBE-oxidizing activity may have previously gone undetected in n-octane-grown cells because of the unusually high K_s value (20 to 40 mM) for MTBE.