Environmental Persistence of Bacillus anthracis and Bacillus subtilis Spores

There is a lack of data for how the viability of biological agents may degrade over time in different environments. In this study, experiments were conducted to determine the persistence of Bacillus anthracis and Bacillus subtilis spores on outdoor materials with and without exposure to simulated sunlight, using ultraviolet (UV)-A/B radiation. Spores were inoculated onto glass, wood, concrete, and topsoil and recovered after periods of 2, 14, 28, and 56 days. Recovery and inactivation kinetics for the two species were assessed for each surface material and UV exposure condition. Results suggest that with exposure to UV, decay of spore viability for both Bacillus species occurs in two phases, with an initial rapid decay, followed by a slower inactivation period. The exception was with topsoil, in which there was minimal loss of spore viability in soil over 56 days, with or without UV exposure. The greatest loss in viable spore recovery occurred on glass with UV exposure, with nearly a four log₁₀ reduction after just two days. In most cases, B. subtilis had a slower rate of decay than B. anthracis, although less B. subtilis was recovered initially.     

UV Resistance of Bacillus anthracis Spores Revisited: Validation of Bacillus subtilis Spores as UV Surrogates for Spores of B. anthracis Sterne

Recent bioterrorism concerns have prompted renewed efforts towards understanding the biology of bacterial spore resistance to radiation with a special emphasis on the spores of Bacillus anthracis. A review of the literature revealed that B. anthracis Sterne spores may be three to four times more resistant to 254-nm-wavelength UV than are spores of commonly used indicator strains of Bacillus subtilis. To test this notion, B. anthracis Sterne spores were purified and their UV inactivation kinetics were determined in parallel with those of the spores of two indicator strains of B. subtilis, strains WN624 and ATCC 6633. When prepared and assayed under identical conditions, the spores of all three strains exhibited essentially identical UV inactivation kinetics. The data indicate that standard UV treatments that are effective against B. subtilis spores are likely also sufficient to inactivate B. anthracis spores and that the spores of standard B. subtilis strains could reliably be used as a biodosimetry model for the UV inactivation of B. anthracis spores.     

Fast and Sensitive Detection of Bacillus anthracis Spores by Immunoassay

Bacillus anthracis is one of the most dangerous potential biological weapons, and it is essential to develop a rapid and simple method to detect B. anthracis spores in environmental samples. The immunoassay is a rapid and easy-to-use method for the detection of B. anthracis by means of antibodies directed against surface spore antigens. With this objective in view, we have produced a panel of monoclonal antibodies against B. anthracis and developed colorimetric and electrochemiluminescence (ECL) immunoassays. Using Meso Scale Discovery ECL technology, which is based on electrochemiluminescence (ECL) detection utilizing a sulfo-Tag label that emits light upon electrochemical stimulation (using a dedicated ECL plate reader, an electrical current is placed across the microplate with electrodes integrated into the bottom of the plate, resulting in a series of electrically induced reactions leading to a luminescent signal), a detection limit ranging between 0.3 × 10(3) and 10(3) CFU/ml (i.e., 30 to 100 spores per test), depending on the B. anthracis strain assayed, was achieved. In complex matrices (5 mg/ml of soil or simulated powder), the detection level (without any sample purification or concentration) was never altered more than 3-fold compared with the results obtained in phosphate-buffered saline.     

Inactivation of Spores of Bacillus anthracis Sterne, Bacillus cereus, and Bacillus thuringiensis subsp. israelensis by Chlorination

Three species of Bacillus were evaluated as potential surrogates for Bacillus anthracis for determining the sporicidal activity of chlorination as commonly used in drinking water treatment. Spores of Bacillus thuringiensis subsp. israelensis were found to be an appropriate surrogate for spores of B. anthracis for use in chlorine inactivation studies.     

Identification and Validation of Specific Markers of Bacillus anthracis Spores by Proteomics and Genomics Approaches

Bacillus anthracis is the causative bacteria of anthrax, an acute and often fatal disease in humans. The infectious agent, the spore, represents a real bioterrorism threat and its specific identification is crucial. However, because of the high genomic relatedness within the Bacillus cereus group, it is still a real challenge to identify B. anthracis spores confidently. Mass spectrometry-based tools represent a powerful approach to the efficient discovery and identification of such protein markers. Here we undertook comparative proteomics analyses of Bacillus anthracis, cereus and thuringiensis spores to identify proteoforms unique to B. anthracis. The marker discovery pipeline developed combined peptide- and protein-centric approaches using liquid chromatography coupled to tandem mass spectrometry experiments using a high resolution/high mass accuracy LTQ-Orbitrap instrument. By combining these data with those from complementary bioinformatics approaches, we were able to highlight a dozen novel proteins consistently observed across all the investigated B. anthracis spores while being absent in B. cereus/thuringiensis spores. To further demonstrate the relevance of these markers and their strict specificity to B. anthracis, the number of strains studied was extended to 55, by including closely related strains such as B. thuringiensis 9727, and above all the B. cereus biovar anthracis CI, CA strains that possess pXO1- and pXO2-like plasmids. Under these conditions, the combination of proteomics and genomics approaches confirms the pertinence of 11 markers. Genes encoding these 11 markers are located on the chromosome, which provides additional targets complementary to the commonly used plasmid-encoded markers. Last but not least, we also report the development of a targeted liquid chromatography coupled to tandem mass spectrometry method involving the selection reaction monitoring mode for the monitoring of the 4 most suitable protein markers. Within a proof-of-concept study, we demonstrate the value of this approach for the further high throughput and specific detection of B. anthracis spores within complex samples.Bacillus anthracis is a highly virulent bacterium, which is the etiologic agent of anthrax, an acute and often lethal disease of animals and humans (1). According to the Centers for Disease Control and Prevention, B. anthracis is classified as a category A agent, the highest rank of potential bioterrorism agents (http://www.bt.cdc.gov/agent/agentlist-category.asp). The infectious agent of anthrax, the spore, was used as a bioterrorism weapon in 2001 in the United States when mailed letters containing B. anthracis spores caused 22 cases of inhalational and/or cutaneous anthrax, five of which were lethal (2). These events have emphasized the need for rapid and accurate detection of B. anthracis spores.Bacillus anthracis is a member of the genus Bacillus, Gram-positive, rod-shaped bacteria characterized by the ability to form endospores under aerobic or facultative anaerobic conditions (3). The genus Bacillus is a widely heterogeneous group encompassing 268 validly described species to date (http://www.bacterio.net/b/bacillus.html, last accessed on August 9^th 2013). B. anthracis is part of the B. cereus group which consists of six distinct species: B. anthracis, B. cereus, B. thuringiensis, B. mycoides, B. pseudomycoides, and B. weihenstephanensis (4, 5). The latter three species are generally regarded as nonpathogenic whereas B. cereus and B. thuringiensis could be opportunistic or pathogenic to mammals or insects (5, 6). B. cereus is a ubiquitous species that lives in soil but is also found in foods of plant and animal origin, such as dairy products (7). Its occurrence has also been linked to food poisoning and it can cause diarrhea and vomiting (6, 8). B. thuringiensis is primarily an insect pathogen, also present in soil, and often used as a biopesticide (9).B. anthracis is highly monomorphic, that is, shows little genetic variation (10), and primarily exists in the environment as a highly stable, dormant spore in the soil (1). Specific identification of B. anthracis is challenging because of its high genetic similarity (sequence similarity >99%) with B. cereus and B. thuringiensis (5, 11). The fact that these closely related species are rather omnipresent in the environment further complicates identification of B. anthracis. The main difference among these three species is the presence in B. anthracis of the two virulence plasmids pXO1 and pXO2 (1), which are responsible for its pathogenicity. pXO1 encodes a tripartite toxin (protective antigen (PA), lethal factor (LF), and edema factor (EF)) which causes edema and death (1), whereas pXO2 encodes a poly-γ-d-glutamate capsule which protects the organism from phagocytosis (1). B. anthracis identification often relies on the detection of the genes encoded by these two plasmids via nucleic acid-based assays (12–14). Nevertheless, the occasionally observed loss of the pXO2 plasmid within environmental species may impair the robustness of detection (1). In addition, in recent years a series of findings has shown that the presence of pXO1 and pXO2 is not a unique feature of B. anthracis. Indeed, Hu et al. have demonstrated that ∼7% of B. cereus/B. thuringiensis species can have a pXO1-like plasmid and ∼1.5% a pXO2-like plasmid (15). This was particularly underlined for some virulent B. cereus strains (i.e. B. cereus strains G9241, B. cereus biovar anthracis strains CA and CI) (16–20).Because of these potential drawbacks, the use of chromosome-encoded genes would be preferable for the specific detection of B. anthracis. Such genes (rpoB, gyrA, gyrB, plcR, BA5345, and BA813) have been reported as potential markers (21–25), but concerns have also been raised about their ability to discriminate B. anthracis efficiently from closely related B. cereus strains (26). Ahmod et al. have recently pointed out, by in silico database analysis, that a specific sequence deletion (indel) occurs in the yeaC gene and exploited it for the specific identification of B. anthracis (27). Nevertheless, a few B. anthracis strains (e.g. B. anthracis A1055) do not have this specific deletion and so may lead to false-negative results (27).In the last few years, protein profiling by MS, essentially based on matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF MS), has emerged as an alternative (or a complement) to genotypic or phenotypic methods for the fast and efficient identification of microorganisms (28, 29). Such an approach is based on the reproducible acquisition of global bacterial protein fingerprints/patterns. The combination of MS-based protein patterns and chemometric/bioinformatic tools has been demonstrated to efficiently differentiate members of the B. cereus group from other Bacillus species (30). However, the specific discrimination of B. anthracis from the closely related B. cereus and B. thuringiensis remains difficult (30). This study of Lasch and coworkers, performed on vegetative cells, identified a few ribosomal and spore proteins as being responsible for this clustering (30). Closer inspection of the data revealed that B. anthracis identification was essentially based on one particular isoform of the small acid-soluble spore protein B (SASP-B)¹ (30–34), which is exclusively expressed in spores, as the samples were shown to contain residual spores. However, the specificity of SASP-B has recently been questioned as the published genomes of B. cereus biovar anthracis CI and B. thuringiensis BGSC 4CC1 strains have been shown to share the same SASP-B isoform as B. anthracis (35). Altogether these results underline that the quest for specific markers of B. anthracis needs to be pursued.Mass spectrometry also represents a powerful tool for the discovery and identification of protein markers (36, 37). In the case of B. anthracis, this approach has more commonly been used for the comprehensive characterization of given bacterial proteomes. For example, the proteome of vegetative cells with variable plasmid contents has been extensively studied (38–40), as the proteomes of mature spores (41, 42) and of germinating spores (43, 44). Only one recent study, based on a proteo-genomic approach, was initiated to identify protein markers of B. anthracis (45). In this work, potential markers were characterized but using a very limited number of B. cereus group strains (three B. cereus and two B. thuringiensis). Moreover, this study was done on vegetative cells, whereas the spore proteome is drastically different. To our knowledge, no study has characterized and validated relevant protein markers specific to B. anthracis spores, which constitute the dissemination form of B. anthracis and are often targeted by first-line immunodetection methods (46).Here we report comparative proteomics analyses of Bacillus anthracis/cereus/thuringiensis spores, undertaken to identify proteoforms unique to B. anthracis. Preliminary identification was performed on a limited set of Bacillus species both at the peptide (after enzymatic digestion) and protein levels by liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) using a high resolution/high mass accuracy LTQ-Orbitrap instrument. The pertinence of 11 markers was further demonstrated using proteomics and genomics approaches on a representative larger set of up to 55 different strains, including the closely related B. cereus biovar anthracis CI, CA, and B. thuringiensis 9727. Lastly, as a proof-of-concept study, we also report for four B. anthracis markers the implementation of a targeted LC-MS/MS method using selected reaction monitoring (SRM), based on the extension of a previous one focused on SASP-B (35). Preliminary results regarding method usefulness for the high throughput and accurate detection of B. anthracis spores in complex samples were also obtained and will be reported herein.     

Inactivation of Bacillus anthracis Spores by Liquid Biocides in the Presence of Food Residue

Biocide inactivation of Bacillus anthracis spores in the presence of food residues after a 10-min treatment time was investigated. Spores of nonvirulent Bacillus anthracis strains 7702, ANR-1, and 9131 were mixed with water, flour paste, whole milk, or egg yolk emulsion and dried onto stainless-steel carriers. The carriers were exposed to various concentrations of peroxyacetic acid, sodium hypochlorite (NaOCl), or hydrogen peroxide (H₂O₂) for 10 min at 10, 20, or 30°C, after which time the survivors were quantified. The relationship between peroxyacetic acid concentration, H₂O₂ concentration, and spore inactivation followed a sigmoid curve that was accurately described using a four-parameter logistic model. At 20°C, the minimum concentrations of peroxyacetic acid, H₂O₂, and NaOCl (as total available chlorine) predicted to inactivate 6 log₁₀ CFU of B. anthracis spores with no food residue present were 1.05, 23.0, and 0.78%, respectively. At 10°C, sodium hypochlorite at 5% total available chlorine did not inactivate more than 4 log₁₀ CFU. The presence of the food residues had only a minimal effect on peroxyacetic acid and H₂O₂ sporicidal efficacy, but the efficacy of sodium hypochlorite was markedly inhibited by whole-milk and egg yolk residues. Sodium hypochlorite at 5% total available chlorine provided no greater than a 2-log₁₀ CFU reduction when spores were in the presence of egg yolk residue. This research provides new information regarding the usefulness of peroxygen biocides for B. anthracis spore inactivation when food residue is present. This work also provides guidance for adjusting decontamination procedures for food-soiled and cold surfaces.     

体外筛选炭疽芽孢适配子

用SELEX技术 ,寻获炭疽芽孢适配子 ,研究其亲和功能及是否作为炭疽芽孢的检测分子。化学合成长度为 35mer的随机DNA库 ,以炭疽杆菌疫苗株A .16R芽孢为靶标进行 18轮的筛选 ,筛选产物克隆、测序 ,利用生物素 亲和素 辣根过氧化物酶显色系统判断适配子与芽孢的结合活性 ;计算机软件分析测序适配子保守序列和二级结构 ;以兔抗炭疽芽孢抗体为捕获分子 ,适配子为检测分子混合夹心法检测炭疽芽孢。第 18轮筛选的适配子与芽孢结合后A值比第 1轮的提高了 3733 .33 %以上 ;测序 79个序列中 ,A值最高为 1.2 0 ,最低为 0 .2 0 ;混合夹心法检测表明 ,适配子量为 16 μg ,芽孢为 4× 10 7个时 ,显色信号强度最强。结果提示 ,其 5′端茎环及发夹结构是与芽孢结合的基础 ,远程高级结构对其结合功能有一定的影响 ;寡核苷酸适配子可以作为炭疽芽孢的检测分子     

Synergism between Bacillus thuringiensis Spores and Toxins against Resistant and Susceptible Diamondback Moths (Plutella xylostella)

We studied the effects of combinations of Bacillus thuringiensis spores and toxins on the mortality of diamondback moth (Plutella xylostella) larvae in leaf residue bioassays. Spores of B. thuringiensis subsp. kurstaki increased the toxicity of crystals of B. thuringiensis subsp. kurstaki to both resistant and susceptible larvae. For B. thuringiensis subsp. kurstaki, resistance ratios were 1,200 for a spore-crystal mixture and 56,000 for crystals without spores. Treatment of a spore-crystal formulation of B. thuringiensis subsp. kurstaki with the antibiotic streptomycin to inhibit spore germination reduced toxicity to resistant larvae but not to susceptible larvae. In contrast, analogous experiments with B. thuringiensis subsp. aizawai revealed no significant effects of adding spores to crystals or of treating a spore-crystal formulation with streptomycin. Synergism occurred between Cry2A and B. thuringiensis subsp. kurstaki spores against susceptible larvae and between Cry1C and B. thuringiensis subsp. aizawai spores against resistant and susceptible larvae. The results show that B. thuringiensis toxins combined with spores can be toxic even though the toxins and spores have little or no independent toxicity. Results reported here and previously suggest that, for diamondback moth larvae, the extent of synergism between spores and toxins of B. thuringiensis depends on the strain of insect, the type of spore, the set of toxins, the presence of other materials such as formulation ingredients, and the concentrations of spores and toxins.     

HtrC Is Involved in Proteolysis of YpeB during Germination of Bacillus anthracis and Bacillus subtilis Spores

Bacterial endospores can remain dormant for decades yet can respond to nutrients, germinate, and resume growth within minutes. An essential step in the germination process is degradation of the spore cortex peptidoglycan wall, and the SleB protein in Bacillus species plays a key role in this process. Stable incorporation of SleB into the spore requires the YpeB protein, and some evidence suggests that the two proteins interact within the dormant spore. Early during germination, YpeB is proteolytically processed to a stable fragment. In this work, the primary sites of YpeB cleavage were identified in Bacillus anthracis, and it was shown that the stable products are comprised of the C-terminal domain of YpeB. Modification of the predominant YpeB cleavage sites reduced proteolysis, but cleavage at other sites still resulted in loss of full-length YpeB. A B. anthracis strain lacking the HtrC protease did not generate the same stable YpeB products. In B. anthracis and Bacillus subtilis htrC mutants, YpeB was partially stabilized during germination but was still degraded at a reduced rate by other, unidentified proteases. Purified HtrC cleaved YpeB to a fragment similar to that observed in vivo, and this cleavage was stimulated by Mn²⁺ or Ca²⁺ ions. A lack of HtrC did not stabilize YpeB or SleB during spore formation in the absence of the partner protein, indicating other proteases are involved in their degradation during sporulation.     

Role of the gerP Operon in Germination and Outgrowth of Bacillus anthracis Spores

Germination of Bacillus anthracis spores occurs when nutrients such as amino acids or purine nucleosides stimulate specific germinant receptors located in the spore inner membrane. The gerP_ABCDEF operon has been suggested to play a role in facilitating the interaction between germinants and their receptors in spores of Bacillus subtilis and Bacillus cereus. B. anthracis mutants containing deletions in each of the six genes belonging to the orthologue of the gerP_ABCDEF operon, or deletion of the entire operon, were tested for their ability to germinate. Deletion of the entire gerP operon resulted in a significant delay in germination in response to nutrient germinants. These spores eventually germinated to levels equivalent to wild-type, suggesting that an additional entry point for nutrient germinants may exist. Deletions of each individual gene resulted in a similar phenotype, with the exception of ΔgerPF, which showed no obvious defect. The removal of two additional gerPF-like orthologues was necessary to achieve the germination defect observed for the other mutants. Upon physical removal of the spore coat, the mutant lacking the full gerP operon no longer exhibited a germination defect, suggesting that the GerP proteins play a role in spore coat permeability. Additionally, each of the gerP mutants exhibited a severe defect in calcium-dipicolinic acid (Ca-DPA)–dependent germination, suggesting a role for the GerP proteins in this process. Collectively, these data implicate all GerP proteins in the early stages of spore germination.     

Mechanisms of Induction of Germination of Bacillus subtilis Spores by High Pressure

Spores of Bacillus subtilis lacking all germinant receptors germinate >500-fold slower than wild-type spores in nutrients and were not induced to germinate by a pressure of 100 MPa. However, a pressure of 550 MPa induced germination of spores lacking all germinant receptors as well as of receptorless spores lacking either of the two lytic enzymes essential for cortex hydrolysis during germination. Complete germination of spores either lacking both cortex-lytic enzymes or with a cortex not attacked by these enzymes was not induced by a pressure of 550 MPa, but treatment of these mutant spores with this pressure caused the release of dipicolinic acid. These data suggest the following conclusions: (i) a pressure of 100 MPa induces spore germination by activating the germinant receptors; and (ii) a pressure of 550 MPa opens channels for release of dipicolinic acid from the spore core, which leads to the later steps in spore germination.     

Combined Effects of High Hydrostatic Pressure and Temperature for Inactivation of Bacillus anthracis Spores

Spores of Bacillus anthracis are known to be extremely resistant to heat treatment, irradiation, desiccation, and disinfectants. To determine inactivation kinetics of spores by high pressure, B. anthracis spores of a Sterne strain-derived mutant deficient in the production of the toxin components (strain RP42) were exposed to pressures ranging from 280 to 500 MPa for 10 min to 6 h, combined with temperatures ranging from 20 to 75°C. The combination of heat and pressure resulted in complete destruction of B. anthracis spores, with a D value (exposure time for 90% inactivation of the spore population) of approximately 4 min after pressurization at 500 MPa and 75°C, compared to 160 min at 500 MPa and 20°C and 348 min at atmospheric pressure (0.1 MPa) and 75°C. The use of high pressure for spore inactivation represents a considerable improvement over other available methods of spore inactivation and could be of interest for antigenic spore preparation.     

Nanoscale Structural and Mechanical Analysis of Bacillus anthracis Spores Inactivated with Rapid Dry Heating

Effective killing of Bacillus anthracis spores is of paramount importance to antibioterrorism, food safety, environmental protection, and the medical device industry. Thus, a deeper understanding of the mechanisms of spore resistance and inactivation is highly desired for developing new strategies or improving the known methods for spore destruction. Previous studies have shown that spore inactivation mechanisms differ considerably depending upon the killing agents, such as heat (wet heat, dry heat), UV, ionizing radiation, and chemicals. It is believed that wet heat kills spores by inactivating critical enzymes, while dry heat kills spores by damaging their DNA. Many studies have focused on the biochemical aspects of spore inactivation by dry heat; few have investigated structural damages and changes in spore mechanical properties. In this study, we have inactivated Bacillus anthracis spores with rapid dry heating and performed nanoscale topographical and mechanical analysis of inactivated spores using atomic force microscopy (AFM). Our results revealed significant changes in spore morphology and nanomechanical properties after heat inactivation. In addition, we also found that these changes were different under different heating conditions that produced similar inactivation probabilities (high temperature for short exposure time versus low temperature for long exposure time). We attributed the differences to the differential thermal and mechanical stresses in the spore. The buildup of internal thermal and mechanical stresses may become prominent only in ultrafast, high-temperature heat inactivation when the experimental timescale is too short for heat-generated vapor to efficiently escape from the spore. Our results thus provide direct, visual evidences of the importance of thermal stresses and heat and mass transfer to spore inactivation by very rapid dry heating.     

Detection of Frequency Resonance Energy Transfer Pair on Double-Labeled Microsphere and Bacillus anthracis Spores by Flow Cytometry

Development of an ultrasensitive biosensor for biological hazards in the environment is a major need for pollutant control and for the detection of biological warfare. Fluorescence methods combined with immunodiagnostic methods are the most common. To minimize background noise, arising from the unspecific adsorption effect, we have adapted the FRET (frequency resonance energy transfer) effect to the immunofluorescence method. FRET will increase the selectivity of the diagnosis process by introducing a requirement for two different reporter molecules that have to label the antigen surface at a distance that will enable FRET. Utilizing the multiparameter capability of flow cytometry analysis to analyze the double-labeling/FRET immunostaining will lead to a highly selective and sensitive diagnostic method. This work examined the FRET interaction of fluorescence-labeled avidin molecules on biotin-coated microspheres as a model system. As target system, we have used labeled polyclonal antibodies on Bacillus anthracis spores. The antibodies used were purified immunoglobulin G (IgG) molecules raised in rabbits against B. anthracis exosoporium components. The antibodies were fluorescence labeled by a donor-acceptor chromophore pair, alexa488 as a donor and alexa594 as an acceptor. On labeling the spores with alexa488-IgG as a donor and alexa594-IgG as an acceptor, excitation at 488 nm results in quenching of the alexa-488 fluorescence (E^q = 35%) and appearance of the alexa594 fluorescence (E^s = 22%), as detected by flow cytometry analysis. The FRET effect leads to a further isolated gate (FL1/FL3) for the target spores compared to competitive spores such as B. thuringiensis subsp. israelensis and B. subtilis. This new approach, combining FRET labeling and flow cytometry analysis, improved the selectivity of the B. anthracis spores by a factor of 10 with respect to B. thuringiensis subsp. israelensis and a factor of 100 with respect to B. subtilis as control spores.     

Development and Implementation of a Single-Chain Fv Antibody for Specific Detection of Bacillus anthracis Spores

A single-chain Fv (scFv) antibody was developed and applied for efficient and specific detection of Bacillus anthracis spores. The antibody was isolated from a phage display library prepared from spleens of mice immunized with a water-soluble extract of the outer membrane of the B. anthracis spore (exosporium). The library (7 × 10⁶ PFU) was biopanned against live, native B. anthracis ATCC Δ14185 spores suspended in solution, resulting in the isolation of a unique soluble scFv antibody. The antibody was affinity purified and its affinity constant (3 × 10⁸ ± 1 × 10⁸ M⁻¹) determined via flow cytometry (FCM). Preliminary characterization of scFv specificity indicated that the scFv antibody does not cross-react with representatives of some phylogenetically related Bacillus spores. The potential use of scFv antibodies in detection platforms was demonstrated by the successful application of the soluble purified scFv antibody in enzyme-linked immunosorbent assays, immunofluorescence assays, and FCM.