Investigation of aggregation and assembly of alkali lignin using iodine as a probe

Molecular iodine has been introduced into the alkali lignin (AL) solutions to adjust the π-π aggregation, and the effect of lignin-iodine complexes on the aggregation and assembly characteristics of AL have been investigated by using fluorescence, UV-vis spectroscopy, light scattering, and viscometric techniques. Results show that AL form π-π aggregates (i.e., J-aggregates) in THF driven by the π-π interaction of the aromatic groups in AL, and the π-π aggregates undergo disaggregation in THF-I(2) media because of the formation of lignin-iodine charge-transfer complexes. By using iodine as a probe to investigate the aggregation behaviors and assembly characteristics, it is estimated that about 18 mol % aromatic groups of AL form π-π aggregates in AL molecular aggregates. When molecular iodine is introduced into the AL solutions, lignin-iodine complexes occur with charge-transfer transition from HOMO of the aromatic groups of AL to the LUMO of iodine. The formation of lignin-iodine complexes reduces the affinity of the aromatic groups approaching each other due to the electrostatic repulsion and then eliminates the π-π interaction of the aromatic groups. The disaggregation of the π-π aggregates brings a dissociation behavior of AL chains and a pronounced molecular expansion. This dissociation behavior and molecular expansion of AL in the dipping solutions induce a decrease in the adsorbed amount and an increase in the adsorption rate, when AL is transferred from the dipping solution to the self-assembled adsorbed films. Consequently, the adsorption behavior of AL can be controlled by adjusting the π-π aggregation. Above observations give insight into the occurrence of J-aggregation of the aromatic groups in the AL molecular aggregates and the disaggregation mechanism of AL aggregates induced by the lignin-iodine complexes for the first time. The understanding can provide an academic instruction in the efficient utilization of the alkali lignin from the waste liquor and also leads to further development in expanding functionalities of the aromatic compounds through manipulation of the π-π aggregation.     

阳离子-π相互作用在两种典型蛋白质折叠型中的偏好性

阳离子-π相互作用是一种在阳离子和芳香性体系之间形成的一种作用力。在蛋白质中,带正电荷的氨基酸(Lys、Arg)和芳香族氨基酸(Phe、Tyr、Trp)之间可以形成阳离子-π相互作用。对α/β类蛋白中两种典型折叠类型――单绕和双绕的研究表明:(1)单绕结构中阳离子-π相互作用的分布密度是双绕结构的2.3倍。(2)Arg-Phe组合偏好在双绕中出现,Arg-Tyr组合偏好在单绕中出现。(3)在单绕中除Lys-Phe组合外,其余5种组合的阳离子-π相互作用能量高于双绕的对应组合,其中以Arg-Trp组合的能量最高。(4)在单绕结构中,样本所含氨基酸残基数量和样本中阳离子-π的数量有明显的相关性,在双绕结构中没有发现类似的相关性。(5)在单绕和双绕结构当中,把阳离子-π相互作用能量分解为静电能和范德华力能揭示出静电能与范德华力能之比接近2∶1,静电作用在阳离子-π相互作用中起主要作用。     

Cation-π interactions in lipocalins: structural and functional implications

The cation-π interaction impacts protein folding, structural stability, specificity, and molecular recognition. Cation-π interactions have been overlooked in the lipocalin family. To fill this gap, these interactions were analyzed in the 113 crystal and solution structures from the lipocalin family. The cation-π interactions link previously identified structurally conserved regions and reveal new motifs, which are beyond the reach of a sequence alignment algorithm. Functional and structural significance of the interactions were tested experimentally in human tear lipocalin (TL). TL, a prominent and promiscuous lipocalin, has a key role in lipid binding at the ocular surface. Ligand binding modulation through the loop AB at the "open" end of the barrel has been erroneously attributed solely to electrostatic interactions. Data revealed that the interloop cation-π interaction in the pair Phe28-Lys108 contributes significantly to stabilize the holo-conformation of the loop AB. Numerous energetically significant and conserved cation-π interactions were uncovered in TL and throughout the lipocalin family. Cation-π interactions, such as the highly conserved Trp17-Arg118 pair in TL, were educed in low temperature experiments of mutants with Trp to Tyr substitutions.     

Polyelectrolyte-mediated adsorption of amelogenin monomers and nanospheres forming mono- or multilayers

We have applied optical waveguide lightmode spectroscopy combined with streaming potential measurements and Fourier-transformed infrared spectroscopy to investigate adsorption of amelogenin nanospheres onto polyelectrolytes. The long-term objective was to better understand the chemical nature of these assemblies and to gain further insight into the molecular mechanisms involved during self-assembly. It was found that monolayers of monomers and negatively charged nanospheres of a recombinant amelogenin (rM179) irreversibly adsorbed onto a positively charged polyelectrolyte multilayer films. On the basis of measurements performed at different temperatures, it was demonstrated that intermolecular interactions for the formation of nanospheres were not affected by their adsorption onto polyelectrolytes. Consecutive adsorption of nanospheres resulting in the formation of multilayer structures was possible by using cationic poly(l-lysine) as mediators. N-Acetyl-d-glucosamine (GlcNac) did not disturb the nanosphere-assembled protein's structure, and it only affected the adsorption of monomeric amelogenin. Infrared spectroscopy of adsorbed amelogenin revealed conformational differences between the monomeric and assembled forms of rM179. While there was a considerable amount of alpha-helices in the monomers, beta-turn and beta-sheet structures dominated the assembled proteins. Our work constitutes the first report on a structurally controlled in vitro buildup of an rM179 nanosphere monolayer-based matrix. Our data support the notion that amelogenin self-assembly is mostly driven by hydrophobic interactions and that amelogenin/PEM interactions are dominated by electrostatic forces. We suggest that similar forces can govern amelogenin interactions with non-amelogenins or the mineral phase during enamel biomineralization.     

The leucine rich amelogenin protein (LRAP) adsorbs as monomers or dimers onto surfaces

Amelogenin is believed to be involved in controlling the formation of the highly anisotropic and ordered hydroxyapatite crystallites that form enamel. The adsorption behavior of amelogenin proteins onto substrates is very important because protein–surface interactions are critical to its function. We have previously used LRAP, a splice variant of amelogenin, as a model protein for the full-length amelogenin in solid-state NMR and neutron reflectivity studies at interfaces. In this work, we examined the adsorption behavior of LRAP in greater detail using model self-assembled monolayers containing COOH, CH₃, and NH₂ end groups as substrates. Dynamic light scattering (DLS) experiments indicated that LRAP in phosphate buffered saline and solutions containing low concentrations of calcium and phosphate consisted of aggregates of nanospheres. Null ellipsometry and atomic force microscopy (AFM) were used to study protein adsorption amounts and quaternary structures on the surfaces. Relatively high amounts of adsorption occurred onto the CH₃ and NH₂ surfaces from both buffer solutions. Adsorption was also promoted onto COOH surfaces only when calcium was present in the solutions suggesting an interaction that involves calcium bridging with the negatively charged C-terminus. The ellipsometry and AFM studies revealed that LRAP adsorbed onto the surfaces as small subnanosphere-sized structures such as monomers or dimers. We propose that the monomers/dimers were present in solution even though they were not detected by DLS or that they adsorbed onto the surfaces by disassembling or “shedding” from the nanospheres that are present in solution. This work reveals the importance of small subnanosphere-sized structures of LRAP at interfaces.     

Dynamic adsorption behavior of poly(3-hydroxybutyrate) depolymerase onto polyester surface investigated by QCM and AFM

Time-dependent adsorption behavior of poly(3-hydroxybutyrate) (PHB) depolymerase from Ralstonia pickettiiT1 on a polyester surface was studied by complementary techniques of quarts crystal microbalance (QCM) and atomic force microscopy (AFM). Amorphous poly(l-lactide) (PLLA) thin films were used as adsorption substrates. Effects of enzyme concentration on adsorption onto the PLLA surface were determined time-dependently by QCM. Adsorption of PHB depolymerase took place immediately after replacement of the buffer solutions with the enzyme solutions in the cell, followed by a gradual increase in the amount over 30 min. The amount of PHB depolymerase molecules adsorbed on the surface of amorphous PLLA thin films increased with an increase in the enzyme concentration. Time-dependent AFM observation of enzyme molecules was performed during the adsorption of PHB depolymerase. The phase response of the AFM signal revealed that the nature of the PLLA surface around the PHB depolymerase molecule was changed due to the adsorption function of the enzyme and that PHB depolymerase adsorbed onto the PLLA surface as a monolayer at a lower enzyme concentration. The number of PHB depolymerase molecules on the PLLA surface depended on the enzyme concentration and adsorption time. In addition, the height of the adsorbed enzyme was found to increase with time when the PLLA surface was crowded with the enzymes. In the case of higher enzyme concentrations, multilayered PHB depolymerases were observed on the PLLA thin film. These QCM and AFM results indicate that two-step adsorption of PHB depolymerase occurs on the amorphous PLLA thin film. First, adsorption of PHB depolymerase molecules takes place through the characteristic interaction between the binding domain of PHB depolymerase and the free surface of an amorphous PLLA thin film. As the adsorption proceeded, the surface region of the thin film was almost covered with the enzyme, which was accompanied by morphological changes. Second, the hydrophobic interactions among the enzymes in the adlayer and the solution become more dominant to stack as a second layer.     

Influence of salts on electrostatic interactions between poliovirus and membrane filters.

Neither solutions of salts nor solutions of detergents or of an alcohol at pH 4 are capable of eluting poliovirus adsorbed to membrane filters. However, solutions containing both a salt, such as magnesium chloride or sodium chloride, and a detergent or alcohol at pH 4 were capable of eluting adsorbed virus. The ability of ions to promote elution of virus at low pH in the presence of detergent or alcohol was dependent on the size of the ions and the ionic strength of the medium. These results suggest that both electrostatic and hydrophobic interactions are important in maintaining virus adsorption to membrane filters. Hydrophobic interactions can be disrupted by detergents or alcohols. It appears that electrostatic interactions can be disrupted by raising the pH of a solution or by adding certain salts. Disruption of either electrostatic or hydrophobic interactions alone does not permit efficient elution of the adsorbed virus at low pHs. However, when both interactions are disrupted, most of the poliovirus adsorbed to membrane filters is eluted, even at pH 4.     

Influence of salts on electrostatic interactions between poliovirus and membrane filters

Neither solutions of salts nor solutions of detergents or of an alcohol at pH 4 are capable of eluting poliovirus adsorbed to membrane filters. However, solutions containing both a salt, such as magnesium chloride or sodium chloride, and a detergent or alcohol at pH 4 were capable of eluting adsorbed virus. The ability of ions to promote elution of virus at low pH in the presence of detergent or alcohol was dependent on the size of the ions and the ionic strength of the medium. These results suggest that both electrostatic and hydrophobic interactions are important in maintaining virus adsorption to membrane filters. Hydrophobic interactions can be disrupted by detergents or alcohols. It appears that electrostatic interactions can be disrupted by raising the pH of a solution or by adding certain salts. Disruption of either electrostatic or hydrophobic interactions alone does not permit efficient elution of the adsorbed virus at low pHs. However, when both interactions are disrupted, most of the poliovirus adsorbed to membrane filters is eluted, even at pH 4.     

原位椭圆偏振术研究牛血清清蛋白在固/液界面的吸附

用原位椭圆偏振术系统研究了硅片表面因素及缓冲液环境因素对牛血清清蛋白在固/液界面吸附的影响。在生理条件下,疏水表面与亲水表面相比BSA吸附量较大。随着硅片表面电荷密度增加,BSA吸附量增加。BSA吸附量当体溶液pH值等于BSA等电点时达到最大。而随着体溶液离子强度增加,BSA吸附量亦上升。实验结果提示:除了熵驱动作用之外,硅片表面与BSA分子及BSA分子之间的静电作用在BSA吸附中起着十分重要的作用。     

Interactions of thrombin with fibrinogen adsorbed on methyl-, hydroxyl-, amine-, and carboxyl-terminated self-assembled monolayers

We have examined the initial phase of fibrin formation, thrombin-catalyzed fibrinopeptide cleavage, from adsorbed fibrinogen using surface plasmon resonance and liquid chromatography-mass spectrometry. Fibrinogen adsorption impaired thrombin-fibrinogen interactions compared to the interactions of thrombin with fibrinogen in solution. The properties of the underlying substrate significantly affected the extent and kinetics of fibrinopeptide cleavage, and the conversion of adsorbed fibrinogen to fibrin. Fibrinogen adsorbed on negatively charged surfaces (carboxyl-terminated self-assembled monolayers) released a smaller amount of fibrinopeptides, at a reduced rate relative to those of hydrophobic, hydrophilic, and positively charged surfaces (methyl-, hydroxyl-, and amine-terminated self-assembled monolayers, respectively). Additionally, the conversion of adsorbed fibrinogen to fibrin was comparatively inefficient at the negatively charged surface. These data correlated well with trends previously reported for fibrin proliferation as a function of surface properties. We conclude that thrombin interactions with adsorbed fibrinogen determine the extent of subsequent fibrin proliferation on surfaces.     

Influence of pH and ionic strength on the adsorption, leaching and activity of myoglobin immobilized onto ordered mesoporous silicates

Myoglobin has been immobilized onto different ordered mesoporous silicates. The effect of the pH on the adsorption, leaching and activity was studied. The results showed that the maximum amount of protein was adsorbed at a pH 6.5, just below the protein isoelectric point (7–7.3). There was no effect of increasing ionic strength on the adsorption profile at different pH values. The adsorption is rationalized in terms of local electrostatic forces acting between the enzyme and the silica surface as well as hydrophobic interactions close to the protein isoelectric point, whereas at low pH the global charges give rise to protein–protein repulsion and at high pH enzyme–silica repulsion. Higher amounts of immobilized myoglobin were leached at a pH 4, while lower amounts were leached at pH 6.5. The catalytic activity of myoglobin immobilized onto SBA-15 showed optimal activity at a pH 6.5 in comparison to a pH of 5 for the free form.     

Salt-independent adsorption of human serum proteins on cyanocarbon gels

Electron donor acceptor gels based on cyanocarbons have been tested for human serum protein adsorption in the absence of salt-promotion by water-structuring salt. This phenomenon was compared with a normal adsorption process in the presence of salt. The tricyanoaminopropene–divinyl sulfone–agarose displayed unusual protein adsorption properties as binding could occur both independently or dependently of the salt-promotion. The absence of hydrophobic or ionic character of the salt-independent interaction suggests an electron donor acceptor adsorption mechanism which is shown, for the first time, to occur independently of salt-promotion in aqueous solution. Study of the protein adsorption specificity showed similar protein selectivity for the fractions adsorbed in both conditions.     

Salt-independent adsorption of human serum proteins on cyanocarbon gels

Electron donor acceptor gels based on cyanocarbons have been tested for human serum protein adsorption in the absence of salt-promotion by water-structuring salt. This phenomenon was compared with a normal adsorption process in the presence of salt. The tricyanoaminopropene–divinyl sulfone–agarose displayed unusual protein adsorption properties as binding could occur both independently or dependently of the salt-promotion. The absence of hydrophobic or ionic character of the salt-independent interaction suggests an electron donor acceptor adsorption mechanism which is shown, for the first time, to occur independently of salt-promotion in aqueous solution. Study of the protein adsorption specificity showed similar protein selectivity for the fractions adsorbed in both conditions.     

Label-free colorimetric sensor for ultrasensitive detection of heparin based on color quenching of gold nanorods by graphene oxide

A novel label-free colorimetric strategy was developed for ultrasensitive detection of heparin by using the super color quenching capacity of graphene oxide (GO). Hexadecyltrimethylammonium bromide (CTAB)-stabilized gold nanorods (AuNRs) could easily self-assembly onto the surface of GO through electrostatic interaction, resulting in decrease of the surface plasmon resonance (SPR) absorption and consequent color quenching change of the AuNRs from deep to light. Polycationic protamine was used as a medium for disturbing the electrostatic interaction between AuNRs and GO. The AuNRs were prevented from being adsorbed onto the surface of GO because of the stronger interaction between protamine and GO, showing a native color of the AuNRs. On the contrary, in the presence of heparin, which was more easily to combine with protamine, the AuNRs could self-assembly onto the surface of GO, resulting in the native color disappearing of AuNRs. As the concentration of heparin increased, the color of AuNRs would gradually fade until almost colorless. The amounts of self-assembly AuNRs were proportional to the concentration of heparin, and thereby the changes in the SPR absorption and color had been used to monitor heparin levels. Under optimized conditions, good linearity was obtained in a range of 0.02-0.28 μg/mL (R=0.9957), and a limit of detection was 5 ng/mL. The simultaneous possession of high sensitivity and selectivity, simplicity, rapidity, and visualization enabled this sensor to be potentially applicable for ultrasensitive and rapid on-site detection toward trace heparin.     

The interaction of cytostatic drugs with adsorbents in aqueous media. The potential implications for liposome preparation

A new method that involves the use of the cation exchange resin Dowex 50W-X4 to remove non-encapsulated drugs from liposome dispersions was investigated. Cytostatic drugs widely varying in their molecular structure can be removed from aqueous solutions by Dowex 50W-X4. The applicability of the resin to separate free from liposome-bound drugs was illustrated for a number of cytostatic drugs (cisplatin, doxorubicin, vincristine). The technique presented allows for a rapid, efficient and convenient procedure for the free drug removal from liposome dispersions without dilution of the liposomal preparation. Studies with liposome-encapsulated drugs will be facilitated by the use of this method, since it avoids many of the problems introduced by conventional methods as dialysis, gel filtration and centrifugation/washing. To elucidate the interaction mechanism of doxorubicin with Dowex 50W-X4, alternative adsorbents were studied for their doxorubicin binding properties. In the adsorption process of doxorubicin onto Dowex 50W-X4 both electrostatic (ion exchange) and hydrophobic effects play a role. The results indicate that hydrophobic contributions to the interaction are responsible for the high resistance offered by the binding forces against desorption of adsorbed doxorubicin. For other adsorbents the interactions are either mainly of an electrostatic or a hydrophobic nature.     

Isolation and Characterization of an Anaerobic, Cellulolytic Bacterium, Clostridium cellulovorans sp. nov

Insoluble lauryl pyridinium iodide [C12(50)] was synthesized as an antimicrobial agent. Escherichia coli cells were not killed by C12(50) but only adsorbed onto it. Though cells on C12(50) could not grow in nutrient agar, they possessed the ability to develop once they were liberated from C12(50). The adsorption of cells onto C12(50) was inhibited by iodide anions released from C12(50) itself. The ability of C12(50) to adsorb was decreased by the adsorbed cells, but C12(50) could be reactivated by washing with alkaline solutions. It was, therefore, suggested that this adsorption was mainly due to the electrostatic interaction between cells and C12(50). The adsorption of cells onto C12(50) was confirmed by scanning electron microscopy.     

Isolation and Characterization of an Anaerobic, Cellulolytic Bacterium, Clostridium cellulovorans sp. nov

Insoluble lauryl pyridinium iodide [C12(50)] was synthesized as an antimicrobial agent. Escherichia coli cells were not killed by C12(50) but only adsorbed onto it. Though cells on C12(50) could not grow in nutrient agar, they possessed the ability to develop once they were liberated from C12(50). The adsorption of cells onto C12(50) was inhibited by iodide anions released from C12(50) itself. The ability of C12(50) to adsorb was decreased by the adsorbed cells, but C12(50) could be reactivated by washing with alkaline solutions. It was, therefore, suggested that this adsorption was mainly due to the electrostatic interaction between cells and C12(50). The adsorption of cells onto C12(50) was confirmed by scanning electron microscopy.     

Engineering the hydrophobic residues of a GH11 xylanase impacts its adsorption onto lignin and its thermostability

This study aimed to characterise the parameters governing the non-specific adsorption of a xylanase from Thermobacillus xylanilyticus (Tx-Xyn11) onto lignin isolated from maize stems. Such adsorption may be due to hydrophobic interactions between Tx-Xyn11 and lignin. Our strategy was to mutate hydrophobic residues present on the surface of Tx- Xyn11 into non-hydrophobic residues. Three mutants (P1, P2, and P3) with altered hydrophobic regions were produced and characterised. The thermostability of the P1 mutant was largely decreased compared with the thermostable Tx-Xyn11. The rate of adsorbed enzyme onto lignin was reduced to a similar extent for the P1 and P2 mutants, whereas the adsorption of the P3 mutant was less affected compared with that of Tx-Xyn11. When considered separately, the hydrophobic residues did not affect xylanase adsorption onto lignin. The addition of Tween 20 also led to the decreased adsorption of Tx-Xyn11 onto lignin. These results suggest that hydrophobic interactions are a key parameter in the interaction of Tx-Xyn11 with isolated lignin.     

Hydrophilic monolayer formation of adsorbed cationic starch and cationic hydroxyethyl cellulose derivatives on polyester surfaces

Cationic starch, cationic cellulose derivatives, and hydrophobically modified cationic cellulose were physically adsorbed from aqueous solution onto oppositely charged hydrophobic polyester (poly(ethylene terephthalate)) fabric and nonwoven, and this resulted in hydrophilic surface properties. Surface coverage of the polysaccharides occurred primarily by strong electrostatic interactions, and the surface characteristics were evaluated by measuring the time required for a water droplet to be absorbed into the polyester material as well as by electron spectroscopy for chemical analysis (ESCA). From a comparison of the adsorption characteristics we assess the polysaccharide-dependent and substrate-dependent adsorption behavior and discuss the similarities and differences in the hydrophilic properties and wettability observed. In particular, the temperature of the cationic polysaccharide solutions in which the substrate was immersed, the configuration of the polymer in solution, and the presence of hydrophobic substituents on the cationic moiety have a considerable effect on the polysaccharide affinity and its adsorption on the surface, irrespective of the substrate type (fabric or nonwoven). We also evaluate the relative contribution of the polyelectrolyte molecular weight, concentration in solution, and degree of charge density along the polymer chain which determine the range of interactions and alter surface hydroplilicity dependent on the type of substrate.     

Influence of polyelectrolyte chemical structure on their interaction with lipid membrane of zwitterionic liposomes

In this paper we extend our previous experimental work on interaction between polyelectrolytes and liposomes. First, the adsorption of chitosan and alkylated chitosan (cationic polyelectrolytes) with different alkyl chain lengths on lipid membranes of liposomes is examined. The amount of both chitosans adsorbed remains the same even if more alkylated polysaccharide has to be added to get saturation if compared with unmodified chitosan. It is demonstrated that alkyl chains do not specifically interact with the lipid bilayer and that electrostatic interaction mechanism governs the chitosan adsorption. The difference observed between unmodified and alkylated chitosans behavior to reach the plateau can be interpreted in terms of a competition between electrostatic polyelectrolyte adsorption on lipid bilayer and hydrophobic autoassociation in solution (which depends on the alkyl chain length). Second, interaction of liposomes with hyaluronan (HA) and alkylated hyaluronan (anionic polyelectrolytes) is analyzed. The same types of results as discussed for chitosan are obtained, but in this case, autoassociation of alkylated HA only occurs in the presence of salt excess. Finally, a first positive layer of chitosan is adsorbed on the lipid membrane, followed by a second negative layer of HA at three different pHs. This kind of multilayer decoration allows the control of the net charge of the composite vesicles. A general conclusion is that whatever the pH and, consequently, the initial charge of the liposomes, chitosan adsorption gives positively charged composite systems, which upon addition of hyaluronan, give rise to negatively charged composite vesicles.