A novel technique for viable cell determinations

We have developed a simple method to determine cell viability using two fluorescent dyes, Hoechst 33258 and acridine orange. When these dyes are used in combination, dead cells fluoresce brilliant blue and live cells fluoresce green. This method works over a range of dye concentrations (Hoechst 33258, 0.25-2 micrograms/ml; acridine orange, 1-5.0 micrograms/ml) and the fluorescence spectra of the two dyes are such that only one set of filters is required to visualize the effects of both dyes simultaneously. It is insensitive to a wide range of exogenous serum concentrations and is read with greater uniformity by different observers.     

A Novel Technique for Viable Cell Determinations

We have developed a simple method to determine cell viability using two fluorescent dyes, Hoechst 33258 and acridine orange. When these dyes are used in combination, dead cells fluoresce brilliant blue and live cells fluoresce green. This method works over a range of dye concentrations (Hoechst 33258, 0.25-2 μg/ml; acridine orange, 1-5.0 μg/ml) and the fluorescence spectra of the two dyes are such that only one set of filters is required to visualize the effects of both dyes simultaneously. It is insensitive to a wide range of exogenous serum concentrations and is read with greater uniformity by different observers.     

Multiplexed labeling system for high-throughput cell sorting

Flow cytometry and fluorescence activated cell sorting techniques were designed to realize configurable classification and separation of target cells. A number of cell phenotypes with different functionalities have recently been revealed. Before simultaneous selective capture of cells, it is desirable to label different samples with the corresponding dyes in a multiplexing manner to allow for a single analysis. However, few methods to obtain multiple fluorescent colors for various cell types have been developed. Even when restricted laser sources are employed, a small number of color codes can be expressed simultaneously. In this study, we demonstrate the ability to manifest DNA nanostructure-based multifluorescent colors formed by a complex of dyes. Highly precise self-assembly of fluorescent dye-conjugated oligonucleotides gives anisotropic DNA nanostructures, Y- and tree-shaped DNA (Y-DNA and T-DNA, respectively), which may be used as platforms for fluorescent codes. As a proof of concept, we have demonstrated seven different fluorescent codes with only two different fluorescent dyes using T-DNA. This method provides maximum efficiency for current flow cytometry. We are confident that this system will provide highly efficient multiplexed fluorescent detection for bioanalysis compared with one-to-one fluorescent correspondence for specific marker detection.     

New repertoire of ‘donor-two-acceptor’ NIR fluorogenic dyes

Dye molecules with various fluorescent wavelengths are widely used for diagnostic and optical imaging applications. Accordingly, there is a constant demand for fluorogenic dyes with new properties. We have recently developed a novel strategy for the design of long-wavelength fluorescent dyes with a turn-ON option. The design is based on a donor-two-acceptor π-electron system that can undergo an internal charge transfer to form a new fluorochrome with an extended π-conjugated system. Here, we describe a series of such dyes based on two novel latent donors, naphthol and hydroxycoumarin. One of the dyes has showed excellent near-infrared fluorescent characteristics and specifically was demonstrated as a mitochondrial imaging reagent in live cells. This unique strategy for fluorogenic dye design has opened new doors for further near-infrared fluorescence probe discovery.     

Diolistics: incorporating fluorescent dyes into biological samples using a gene gun

The hand-held gene gun provides a rapid and efficient method of incorporating fluorescent dyes into cells, a technique that is becoming known as diolistics. Transporting fluorescent dyes into cells has, in the past, used predominantly injection or chemical methods. The use of the gene gun, combined with the new generation of fluorescent dyes, circumvents some of the problems of using these methods and also enables the study of cells that have proved difficult traditionally to transfect (e.g. those deep in tissues and/or terminally differentiated); in addition, the use of ion- or metabolite-sensitive dyes provides a route to study cellular mechanisms. Diolistics is also ideal for loading cells with optical nanosensors--nanometre-sized sensors linked to fluorescent probes. Here, we discuss the theoretical considerations of using diolistics, the advantages compared with other methods of inserting dyes into cells and the current uses of the technique, with particular consideration of nanosensors.     

Biolistic and diolistic transfection: using the gene gun to deliver DNA and lipophilic dyes into mammalian cells

Delivery of genes by firing them into mammalian cells is becoming increasingly popular for cells such as neurones, that have proved difficult to transfect by conventional means. In addition it is becoming apparent that this technique also provides a suitable method of introducing cell-specific dyes into mammalian tissues. Here we describe improved protocols for the rapid and efficient delivery of both DNA and lipophilic dyes into mammalian cells in both monolayers and in brain slices. The results show that transfection of genes, such as that for enhanced yellow fluorescent protein, using a modified microcarrier preparation technique combined with either a conventional or novel accelerator channel, yields rapid and efficient production of protein, which can be visualised in 24-48 h. Following similar delivery of lipophilic dyes neurones can be visualised in minutes. These techniques therefore provide an excellent means not only to examine the structure and function of neurones and neuronal genes, but also those of other cell types.     

Custom fluorescent-nucleotide synthesis as an alternative method for nucleic acid labeling

The variety of potentially useful dyes or haptenes available for fluorescent nucleic acid hybridization assays is far greater than what can be obtained from commercial sources. Since this diversity could be useful in many laboratory applications, we have developed a simple and inexpensive procedure for preparing nonpurified labeled nucleotides, for use in common nucleic acid labeling reactions, such as PCR and nick translation. The modified nucleotides were synthesized by coupling allylamine-dUTP to the succinimidyl-ester derivatives of the fluorescent dyes or haptenes such as biotin or digoxigenin, which require fluorescently labeled proteins for detection. This method allows custom preparation of most common fluorescent nucleotides and rapid testing of new ones, while reducing the cost of procedures such as multiplex fluorescent in situ hybridization (M-FISH) by 100-200 fold.     

Dual-laser, differential fluorescence correction method for reducing cellular background autofluorescence

A method has been developed for reducing the intrinsic autofluorescence background component in cells labeled with fluorescent antibodies, thus permitting low levels of antibody-binding on highly autofluorescent cells to be quantified. The method is based on the broad autofluorescent excitation spectra compared to the well-defined spectra of the fluorescent label. Two laser wavelengths were used, one optimally to excite the fluorescent label plus autofluorescence and the second to excite only the autofluorescence. Two fluorescence measurements were made in the same wavelength region and the signals were subtracted on a cell-by-cell basis using a difference amplifier to zero the autofluorescence and amplify the signal from the fluorescent label. Test results on unlabeled autofluorescent macrophages showed that the autofluorescence component was reduced by balancing the signal inputs to the difference amplifier. When labeled macrophages were analyzed, the autofluorescence was reduced and the fluorescent-labeled antibody-binding component was amplified. The method was also able to resolve labeled lymphocytes from unlabeled autofluorescent macrophages.     

Fluorescence Microscopy Methods for Determining the Viability of Bacteria in Association with Mammalian Cells

Central to the field of bacterial pathogenesis is the ability to define if and how microbes survive after exposure to eukaryotic cells. Current protocols to address these questions include colony count assays, gentamicin protection assays, and electron microscopy. Colony count and gentamicin protection assays only assess the viability of the entire bacterial population and are unable to determine individual bacterial viability. Electron microscopy can be used to determine the viability of individual bacteria and provide information regarding their localization in host cells. However, bacteria often display a range of electron densities, making assessment of viability difficult. This article outlines protocols for the use of fluorescent dyes that reveal the viability of individual bacteria inside and associated with host cells. These assays were developed originally to assess survival of Neisseria gonorrhoeae in primary human neutrophils, but should be applicable to any bacterium-host cell interaction. These protocols combine membrane-permeable fluorescent dyes (SYTO9 and 4'',6-diamidino-2-phenylindole [DAPI]), which stain all bacteria, with membrane-impermeable fluorescent dyes (propidium iodide and SYTOX Green), which are only accessible to nonviable bacteria. Prior to eukaryotic cell permeabilization, an antibody or fluorescent reagent is added to identify extracellular bacteria. Thus these assays discriminate the viability of bacteria adherent to and inside eukaryotic cells. A protocol is also provided for using the viability dyes in combination with fluorescent antibodies to eukaryotic cell markers, in order to determine the subcellular localization of individual bacteria. The bacterial viability dyes discussed in this article are a sensitive complement and/or alternative to traditional microbiology techniques to evaluate the viability of individual bacteria and provide information regarding where bacteria survive in host cells.     

Fluorescent indicators of peptide cleavage in the trafficking compartments of living cells: peptides site-specifically labeled with two dyes

When cells are infected with viruses, they notify the immune system by presenting fragments of the virus proteins at the cell surface for detection by T cells. These proteins are digested in the cytoplasm, bound to the major histocompatibility complex I glycoprotein (MHC-I) in the endoplasmic reticulum, and transported to the cell surface. The peptides are cleaved to the precise lengths required for MHC-I binding and detection by T cells. We have developed fluorescent indicators to study the cleavage of peptides in living cells as they are transported from the endoplasmic reticulum to the Golgi apparatus. Specific viral peptides known to be "trimmed" prior to cell surface presentation were labeled with two dyes undergoing fluorescence resonance energy transfer (FRET). When these fluorescent peptides were proteolytically processed in living cells, FRET was halted, so that each labeled fragment and the intact peptide exhibited different fluorescence spectra. Such fluorescent cleavage indicators can be used to study a wide range of biological behaviors dependent on peptide or protein cleavage. However, labeling a peptide with two dyes at precise positions can present a major obstacle to using this technique. Here, we describe two approaches for preparing doubly labeled cleavage indicator peptides. These methods are accessible to researchers using standard laboratory techniques or, for more demanding applications, through cooperation with commercial or core peptide synthesis services using minor modifications of standard synthetic procedures.     

Fluorogen activating proteins in flow cytometry for the study of surface molecules and receptors

The use of fluorescent proteins, particularly when genetically fused to proteins of biological interest, have greatly advanced many flow cytometry research applications. However, there remains a major limitation to this methodology in that only total cellular fluorescence is measured. Commonly used fluorescent proteins (e.g. EGFP and its variants) are fluorescent whether the fusion protein exists on the surface or in sub-cellular compartments. A flow cytometer cannot distinguish between these separate sources of fluorescence. This can be of great concern when using flow cytometry, plate readers or microscopy to quantify cell surface receptors or other surface proteins genetically fused to fluorescent proteins. Recently developed fluorogen activating proteins (FAPs) solve many of these issues by allowing the selective visualization of only those cell surface proteins that are exposed to the extracellular milieu. FAPs are GFP-sized single chain antibodies that specifically bind to and generate fluorescence from otherwise non-fluorescent dyes ('activate the fluorogen'). Like the fluorescent proteins, FAPs can be genetically fused to proteins of interest. When exogenously added fluorogens bind FAPs, fluorescence immediately increases by as much as 20,000-fold, rendering the FAP fusion proteins highly fluorescent. Moreover, since fluorogens can be made membrane impermeant, fluorescence can be limited to only those receptors expressed on the cell surface. Using cells expressing beta-2 adrenergic receptor (β2AR) fused at its N-terminus to a FAP, flow cytometry based receptor internalization assays have been developed and characterized. The fluorogen/FAP system is ideally suited to the study of cell surface proteins by fluorescence and avoids drawbacks of using receptor/fluorescent protein fusions, such as internal accumulation. We also briefly comment on extending FAP-based technologies to the study of events occurring inside of the cell as well.     

Decreasing the thresholds for electroporation by sensitizing cells with local cationic anesthetics and substances that decrease the surface negative electric charge

The recently described method of cell electroporation by flow of cell suspension through localized direct current electric fields (dcEFs) was applied to identify non-toxic substances that could sensitize cells to external electric fields. We found that local cationic anesthetics such as procaine, lidocaine and tetracaine greatly facilitated the electroporation of AT2 rat prostate carcinoma cells and human skin fibroblasts (HSF). This manifested as a 50% reduction in the strength of the electric field required to induce cell death by irreversible electroporation or to introduce fluorescent dyes such as calcein, carboxyfluorescein or Lucifer yellow into the cells. A similar decrease in the electric field thresholds for irreversible and reversible cell electroporation was observed when the cells were exposed to the electric field in the presence of the non-toxic cationic dyes 9-aminoacridine (9-AAA) or toluidine blue. Identifying non-toxic, reversibly acting cell sensitizers may facilitate cancer tissue ablation and help introduce therapeutic or diagnostic substances into the cells and tissues.     

Developing visible fluorogenic 'click-on' dyes for cellular imaging

New fluorogenic dyes were designed and synthesized based on Cu(I)-catalyzed 'click' reaction. Conjugating weakly fluorescent benzothiazole derivatives with an electron-deficient alkyne group at the 2-position with azide-containing molecules in aqueous solution form 'click-on' fluorescent adducts. Model reactions and cell culture experiment indicated that the developed 'click-on' dye could be applied to labeling various biomolecules, such as nucleic acids, proteins, and other molecules, in cells.     

Fluorescent protein biosensors applied to microphysiological systems

This mini-review discusses the evolution of fluorescence as a tool to study living cells and tissues in vitro and the present role of fluorescent protein biosensors (FPBs) in microphysiological systems (MPSs). FPBs allow the measurement of temporal and spatial dynamics of targeted cellular events involved in normal and perturbed cellular assay systems and MPSs in real time. FPBs evolved from fluorescent analog cytochemistry (FAC) that permitted the measurement of the dynamics of purified proteins covalently labeled with environmentally insensitive fluorescent dyes and then incorporated into living cells, as well as a large list of diffusible fluorescent probes engineered to measure environmental changes in living cells. In parallel, a wide range of fluorescence microscopy methods were developed to measure the chemical and molecular activities of the labeled cells, including ratio imaging, fluorescence lifetime, total internal reflection, 3D imaging, including super-resolution, as well as high-content screening. FPBs evolved from FAC by combining environmentally sensitive fluorescent dyes with proteins in order to monitor specific physiological events such as post-translational modifications, production of metabolites, changes in various ion concentrations, and the dynamic interaction of proteins with defined macromolecules in time and space within cells. Original FPBs involved the engineering of fluorescent dyes to sense specific activities when covalently attached to particular domains of the targeted protein. The subsequent development of fluorescent proteins (FPs), such as the green fluorescent protein, dramatically accelerated the adoption of studying living cells, since the genetic “labeling” of proteins became a relatively simple method that permitted the analysis of temporal–spatial dynamics of a wide range of proteins. Investigators subsequently engineered the fluorescence properties of the FPs for environmental sensitivity that, when combined with targeted proteins/peptides, created a new generation of FPBs. Examples of FPBs that are useful in MPS are presented, including the design, testing, and application in a liver MPS.     

Violet laser diodes as light sources for cytometry

BACKGROUND: Violet laser diodes have recently become commercially available. These devices emit 5-25 mW in the range of 395-415 nm, and are available in systems that incorporate the diodes with collimating optics and regulated power supplies in housing incorporating thermoelectric coolers, which are necessary to maintain stable output. Such systems now cost several thousand dollars, but are expected to drop substantially in price. Materials and Methods A 4-mW, 397-nm violet diode system was used in a laboratory-built flow cytometer to excite fluorescence of DAPI and Hoechst dyes in permeabilized and intact cells. Forward and orthogonal light scattering were also measured. RESULTS: DNA content histograms with good precision (G(0)/G(1) coefficient of variation 1.7%) were obtained with DAPI staining; precision was lower using Hoechst 33342. Hoechst 34580, with an excitation maximum nearer 400 nm, yielded the highest fluorescence intensity, but appeared to decompose after a short time in solution. Scatter signals exhibited relatively broad distributions. CONCLUSIONS: Violet laser diodes are relatively inexpensive, compact, efficient, and quiet light sources for DNA fluorescence measurement using DAPI and Hoechst dyes; they can also excite several other fluorescent probes.     

Concentration,cellular exposure and specificity of organelle selective fluorescent dyes in fungal cell biology

This technical focus article discusses the importance of concentration, cellular exposure and specificity for the application of organelle selective fluorescent dyes in fungi using DNA, membrane and cell wall stains as examples. Nonetheless, the presented considerations are generally applicable to all fluorescent dyes applied to living cells.The association of a fluorescent dye with its target molecule generally impairs molecule and consequently organelle function. Effective dye concentration, cellular exposure time and specificity to the target molecule are key factors that influence the biocompatibility of any fluorescent dye. Prominent molecules frequently used as fluorescent staining targets in fungal cell biology are: (i) DNA for nuclear labelling, (ii) α-/β-glucans and chitin for cell wall labelling, and (iii) phospholipids for plasma membrane and endomembrane labelling. In combination with live-cell imaging settings that reduce light stress, i.e. excitation intensities and exposure times set to the minimum that still achieves good signal-to-noise ratios, is the low dosage application of fluorescent markers as so called “vital dyes” essential for visualising cellular processes in an artefact-free fashion.     

Dual-laser flow cytometry of single mammalian cells.

An improved dual-laser flow cytometric system for quantitative analysis and sorting of mammalian cells has been developed using a low-power argon and high-power krypton laser as illumination sources, thus permitting the excitation of fluorescent dyes having absorption regions ranging from the ultraviolet to infrared. Cells stained in liquid suspension with fluorescent dyes enter a flow chamber where they intersect two spatially separated laser beams. Separate pairs of quartz beam-shaping optics focus each beam onto the cell stream. Electro-optical sensors measure fluorescence and light scatter signals from cells that are processed electronically and displayed as frequency distribution histograms. Cells also can be electronically separated and microscopically identified. The ease and versatility of operation designed into this system represent a marked technological improvement for dual-laser excited flow systems. Details of this instrument are described along with illustrative examples of cells stained with mithramycin and rhodamine and analyzed for DNA content, total protein, and nuclear and cytoplasmic diameter.     

Evaluation of Fluorophores to Label SNAP-Tag Fused Proteins for Multicolor Single-Molecule Tracking Microscopy in Live Cells

Single-molecule tracking has become a widely used technique for studying protein dynamics and their organization in the complex environment of the cell. In particular, the spatiotemporal distribution of membrane receptors is an active field of study due to its putative role in the regulation of signal transduction. The SNAP-tag is an intrinsically monovalent and highly specific genetic tag for attaching a fluorescent label to a protein of interest. Little information is currently available on the choice of optimal fluorescent dyes for single-molecule microscopy utilizing the SNAP-tag labeling system. We surveyed 6 green and 16 red excitable dyes for their suitability in single-molecule microscopy of SNAP-tag fusion proteins in live cells. We determined the nonspecific binding levels and photostability of these dye conjugates when bound to a SNAP-tag fused membrane protein in live cells. We found that only a limited subset of the dyes tested is suitable for single-molecule tracking microscopy. The results show that a careful choice of the dye to conjugate to the SNAP-substrate to label SNAP-tag fusion proteins is very important, as many dyes suffer from either rapid photobleaching or high nonspecific staining. These characteristics appear to be unpredictable, which motivated the need to perform the systematic survey presented here. We have developed a protocol for evaluating the best dyes, and for the conditions that we evaluated, we find that Dy 549 and CF 640 are the best choices tested for single-molecule tracking. Using an optimal dye pair, we also demonstrate the possibility of dual-color single-molecule imaging of SNAP-tag fusion proteins. This survey provides an overview of the photophysical and imaging properties of a range of SNAP-tag fluorescent substrates, enabling the selection of optimal dyes and conditions for single-molecule imaging of SNAP-tagged fusion proteins in eukaryotic cell lines.     

Evaluation of Fluorophores to Label SNAP-Tag Fused Proteins for Multicolor Single-Molecule Tracking Microscopy in Live Cells

Single-molecule tracking has become a widely used technique for studying protein dynamics and their organization in the complex environment of the cell. In particular, the spatiotemporal distribution of membrane receptors is an active field of study due to its putative role in the regulation of signal transduction. The SNAP-tag is an intrinsically monovalent and highly specific genetic tag for attaching a fluorescent label to a protein of interest. Little information is currently available on the choice of optimal fluorescent dyes for single-molecule microscopy utilizing the SNAP-tag labeling system. We surveyed 6 green and 16 red excitable dyes for their suitability in single-molecule microscopy of SNAP-tag fusion proteins in live cells. We determined the nonspecific binding levels and photostability of these dye conjugates when bound to a SNAP-tag fused membrane protein in live cells. We found that only a limited subset of the dyes tested is suitable for single-molecule tracking microscopy. The results show that a careful choice of the dye to conjugate to the SNAP-substrate to label SNAP-tag fusion proteins is very important, as many dyes suffer from either rapid photobleaching or high nonspecific staining. These characteristics appear to be unpredictable, which motivated the need to perform the systematic survey presented here. We have developed a protocol for evaluating the best dyes, and for the conditions that we evaluated, we find that Dy 549 and CF 640 are the best choices tested for single-molecule tracking. Using an optimal dye pair, we also demonstrate the possibility of dual-color single-molecule imaging of SNAP-tag fusion proteins. This survey provides an overview of the photophysical and imaging properties of a range of SNAP-tag fluorescent substrates, enabling the selection of optimal dyes and conditions for single-molecule imaging of SNAP-tagged fusion proteins in eukaryotic cell lines.     

Method for enhancing cell penetration of Gd3+-based MRI contrast agents by conjugation with hydrophobic fluorescent dyes

Gadolinium ion (Gd(3+)) complexes are commonly used as magnetic resonance imaging (MRI) contrast agents to enhance signals in T(1)-weighted MR images. Recently, several methods to achieve cell-permeation of Gd(3+) complexes have been reported, but more general and efficient methodology is needed. In this report, we describe a novel method to achieve cell permeation of Gd(3+) complexes by using hydrophobic fluorescent dyes as a cell-permeability-enhancing unit. We synthesized Gd(3+) complexes conjugated with boron dipyrromethene (BDP-Gd) and Cy7 dye (Cy7-Gd), and showed that these conjugates can be introduced efficiently into cells. To examine the relationship between cell permeability and dye structure, we further synthesized a series of Cy7-Gd derivatives. On the basis of MR imaging, flow cytometry, and ICP-MS analysis of cells loaded with Cy7-Gd derivatives, highly hydrophobic and nonanionic dyes were effective for enhancing cell permeation of Gd(3+) complexes. Furthermore, the behavior of these Cy7-Gd derivatives was examined in mice. Thus, conjugation of hydrophobic fluorescent dyes appears to be an effective approach to improve the cell permeability of Gd(3+) complexes, and should be applicable for further development of Gd(3+)-based MRI contrast agents.