Spectral and kinetic studies of the oxidation of monosubstituted phenols and anilines by recombinant Synechocystis catalase-peroxidase compound I.

A high-level expression in Escherichia coli of a fully active recombinant form of a catalase-peroxidase (KatG) from the cyanobacterium Synechocystis PCC 6803 is reported. Since both physical and kinetic characterization revealed its identity with the wild-type protein, the large quantities of recombinant KatG allowed the first examination of second-order rate constants for the oxidation of a series of aromatic donor molecules (monosubstituted phenols and anilines) by a bifunctional catalase-peroxidase compound I using the sequential-mixing stopped-flow technique. Because of the overwhelming catalase activity, peroxoacetic acid has been used for compound I formation. A >/=50-fold excess of peroxoacetic acid is required to obtain a spectrum of relatively pure and stable compound I which is characterized by about 40% hypochromicity, a Soret maximum at 406 nm, and isosbestic points between the native enzyme and compound I at 357 and 430 nm. The apparent second-order rate constant for formation of compound I from ferric enzyme and peroxoacetic acid is (8.74 +/- 0.26) x 10(3) M(-)(1) s(-)(1) at pH 7. 0. Reduction of compound I by aromatic donor molecules is dependent upon the substituent effect on the benzene ring. The apparent second-order rate constants varied from (3.6 +/- 0.1) x 10(6) M(-)(1) s(-)(1) for p-hydroxyaniline to (5.0 +/- 0.1) x 10(2) M(-)(1) s(-)(1) for p-hydroxybenzenesulfonic acid. They are shown to correlate with the substituent constants in the Hammett equation, which suggests that in bifunctional catalase-peroxidases the aromatic donor molecule donates an electron to compound I and loses a proton simultaneously. The value of rho, the susceptibility factor in the Hammett equation, is -3.4 +/- 0.4 for the phenols and -5.1 +/- 0.8 for the anilines. The pH dependence of compound I reduction by aniline exhibits a relatively sharp maximum at pH 5. The redox intermediate formed upon reduction of compound I has spectral features which indicate that the single oxidizing equivalent in KatG compound II is contained on an amino acid which is not electronically coupled to the heme.     

Catalase-peroxidase from the cyanobacterium Synechocystis PCC 6803: cloning, overexpression in Escherichia coli, and kinetic characterization.

The Synechocystis PCC 6803 katG gene encodes a dual-functional catalase-peroxidase (EC 1.11.1.7). We have established a system for the high level expression of a fully active recombinant form of this enzyme. Its entire coding DNA was extended using a synthetic oligonucleotide encoding a hexa-histidine tag at the C-terminus and expressed in Escherichia coli [BL21-(DE3)pLysS] using the pET-3a vector. Hemin was added to the culture medium to ensure its proper association with KatG upon induction. The expressed protein was purified to homogeneity by two chromatography steps including a metal chelate affinity and hydrophobic interaction chromatography. The homodimeric acidic protein (pl = 5.4) had a molecular mass of 170 kDa and a Reinheitszahl (A406/A280) of 0.64. The recombinant protein contained high catalase activity (apparent Km = 4.9 +/- 0.25 mM and apparent kcat = 3500 s(-1)) and an appreciable peroxidase activity with o-dianisidine, guaiacol and pyrogallol, but not with NAD(P)H, ferrocytochrome c, ascorbate or glutathione as electron donors. By using both conventional and sequential stopped-flow spectroscopy, formation of compound I with peroxoacetic acid was calculated to be (8.74 +/- 0.26) x 10(3) M(-1) s(-1), whereas compound I reduction by o-dianisidine, pyrogallol and ascorbate was determined to be (2.71 +/- 0.03) x 10(6) M(-1) S(-1), (8.62 +/- 0.21) x 10(4) M(-1) S(-1), and (5.43 +/- 0.19) x 10(3) M(-1) S(-1), respectively. Cyanide binding studies on native and recombinant enzyme indicated that both have the same heme environment. An apparent second-order rate constant for cyanide binding of (4.8 +/- 0.1) x 10(5) M(-1) S(-1) was obtained.     

Kinetics of interconversion of ferrous enzymes, compound II and compound III, of wild-type synechocystis catalase-peroxidase and Y249F: proposal for the catalatic mechanism

With the exception of catalase-peroxidases, heme peroxidases show no significant ability to oxidize hydrogen peroxide and are trapped and inactivated in the compound III form by H2O2 in the absence of one-electron donors. Interestingly, some KatG variants, which lost the catalatic activity, form compound III easily. Here, we compared the kinetics of interconversion of ferrous enzymes, compound II and compound III of wild-type Synechocystis KatG, the variant Y249F, and horseradish peroxidase (HRP). It is shown that dioxygen binding to ferrous KatG and Y249F is reversible and monophasic with apparent bimolecular rate constants of (1.2 +/- 0.3) x 10(5) M(-1) s(-1) and (1.6 +/- 0.2) x 10(5) M(-1) s(-1) (pH 7, 25 degrees C), similar to HRP. The dissociation constants (KD) of the ferrous-dioxygen were calculated to be 84 microm (wild-type KatG) and 129 microm (Y249F), higher than that in HRP (1.9 microm). Ferrous Y249F and HRP can also heterolytically cleave hydrogen peroxide, forming water and an oxoferryl-type compound II at similar rates ((2.4 +/- 0.3) x 10(5) M(-1) s(-1) and (1.1 +/- 0.2) x 10(5) M(-1) s(-1) (pH 7, 25 degrees C)). Significant differences were observed in the H2O2-mediated conversion of compound II to compound III as well as in the spectral features of compound II. When compared with HRP and other heme peroxidases, in Y249F, this reaction is significantly faster ((1.2 +/- 0.2) x 10(4) M(-1) s(-1))). Ferrous wild-type KatG was also rapidly converted by hydrogen peroxide in a two-phasic reaction via compound II to compound III (approximately 2.0 x 10(5) M(-1) s(-1)), the latter being also efficiently transformed to ferric KatG. These findings are discussed with respect to a proposed mechanism for the catalatic activity.     

Mechanism of reaction of melatonin with human myeloperoxidase

Recently, it was suggested that melatonin (N-acetyl-5-methoxytryptamine) is oxidized by activated neutrophils in a reaction most probably involving myeloperoxidase (Biochem. Biophys. Res. Commun. (2000) 279, 657-662). Myeloperoxidase (MPO) is the most abundant protein of neutrophils and is involved in killing invading pathogens. To clarify if melatonin is a substrate of MPO, we investigated the oxidation of melatonin by its redox intermediates compounds I and II using transient-state spectral and kinetic measurements at 25 degrees C. Spectral and kinetic analysis revealed that both compound I and compound II oxidize melatonin via one-electron processes. The second-order rate constant measured for compound I reduction at pH 7 and pH 5 are (6.1 +/- 0.2) x 10(6) M(-1) s(-1) and (1.0 +/- 0.08) x 10(7) M(-1) s(-1), respectively. The rates for the one-electron reduction of compound II back to the ferric enzyme are (9.6 +/- 0.3) x 10(2) M(-1) s(-1) (pH 7) and (2.2 +/- 0.1) x 10(3) M(-1) s(-1) (pH 5). Thus, melatonin is a much better electron donor for compound I than for compound II. Steady-state experiments showed that the rate of oxidation of melatonin is dependent on the H(2)O(2) concentration, is not affected by superoxide dismutase, and is quickly terminated by sodium cyanide. Melatonin can markedly inhibit the chlorinating activity of MPO at both pH 7 and pH 5. The implication of these findings in the activated neutrophil is discussed.     

Spectral and kinetic studies on the formation of eosinophil peroxidase compound I and its reaction with halides and thiocyanate

Compound I of peroxidases takes part in both the peroxidation and the halogenation reaction. This study for the first time presents transient kinetic measurements of the formation of compound I of human eosinophil peroxidase (EPO) and its reaction with halides and thiocyanate, using the sequential-mixing stopped-flow technique. Addition of 1 equiv of hydrogen peroxide to native EPO leads to complete formation of compound I. At pH 7 and 15 degrees C, the apparent second-order rate constant is (4.3 +/- 0.4) x 10(7) M(-1) s(-1). The rate for compound I formation by hypochlorous acid is (5.6 +/- 0.7) x 10(7) M(-1) s(-1). EPO compound I is unstable and decays to a stable intermediate with a compound II-like spectrum. At pH 7, the two-electron reduction of compound I to the native enzyme by thiocyanate has a second-order rate constant of (1.0 +/- 0. 5) x 10(8) M(-1) s(-1). Iodide [(9.3 +/- 0.7) x 10(7) M(-1) s(-1)] is shown to be a better electron donor than bromide [(1.9 +/- 0.1) x 10(7) M(-1) s(-1)], whereas chloride oxidation by EPO compound I is extremely slow [(3.1 +/- 0.3) x 10(3) M(-1) s(-1)]. The pH dependence studies suggest that a protonated form of compound I is more competent in oxidizing the anions. The results are discussed in comparison with those of the homologous peroxidases myeloperoxidase and lactoperoxidase and with respect to the role of EPO in host defense and tissue injury.     

The Reaction Rates of NO with Horseradish Peroxidase Compounds I and II

In this study the reactions between nitric oxide (NO) and horseradish peroxidase (HRP) compounds I and II were investigated. The reaction between compound I and NO has biphasic kinetics with a clearly dominant initial fast phase and an apparent second-order rate constant of (7.0 +/- 0.3) x 10(5) M(-1) s(-1) for the fast phase. The reaction of compound II and NO was found to have an apparent second-order rate constant of k(app) = (1.3 +/- 0.1) x 10(6) M(-1) s(-1) or (7.4 +/- 0.7) x 10(5) M(-1) s(-1) when measured at 409 nm (the isosbestic point between HRP and HRP-NO) and 419 nm (lambda(max) of compound II and HRP-NO), respectively. Interestingly, the reaction of compound II with NO is unusually high relative to that of compound I, which is usually the much faster reaction. Since horseradish peroxidase is prototypical of mammalian peroxidases with respect to the oxidation of small substrates, these results may have important implications regarding the lifetime and biochemistry of NO in vivo after inflammation where both NO and H(2)O(2) generation are increased several fold.     

Reaction of ferrous lactoperoxidase with hydrogen peroxide and dioxygen: an anaerobic stopped-flow study

Lactoperoxidase (LPO) is found in mucosal surfaces and exocrine secretions including milk, tears, and saliva and has physiological significance in antimicrobial defense which involves (pseudo-)halide oxidation. LPO compound III (a ferrous-dioxygen complex) is known to be formed rapidly by an excess of hydrogen peroxide and could participate in the observed catalase-like activity of LPO. The present anaerobic stopped-flow kinetic analysis was performed in order to elucidate the catalytic mechanism of LPO and the kinetics of compound III formation by probing the reactivity of ferrous LPO with hydrogen peroxide and molecular oxygen. It is shown that ferrous LPO heterolytically cleaves hydrogen peroxide forming water and oxyferryl LPO (compound II). The two-electron oxidation reaction follows second-order kinetics with the apparent bimolecular rate constant being (7.2+/-0.3) x 10(4) M(-1) s(-1) at pH 7.0 and 25 degrees C. The H2O2-mediated conversion of compound II to compound III follows also second-order kinetics (220 M(-1) s(-1) at pH 7.0 and 25 degrees C). Alternatively, compound III is also formed by dioxygen binding to ferrous LPO at an apparent bimolecular rate constant of (1.8+/-0.2) x 10(5) M(-1) s(-1). Dioxygen binding is reversible and at pH 7.0 the dissociation constant (K(D)) of the oxyferrous form is 6 microM. The rate constant of dioxygen dissociation from compound III is higher than conversion of compound III to ferric LPO, which is not affected by the oxygen concentration and follows a biphasic kinetics. A reaction cycle including the redox intermediates compound II, compound III, and ferrous LPO is proposed, which explains the observed (pseudo-)catalase activity of LPO in the absence of one-electron donors. The relevance of these findings in LPO catalysis is discussed.     

Total conversion of bifunctional catalase-peroxidase (KatG) to monofunctional peroxidase by exchange of a conserved distal side tyrosine

Catalase-peroxidases (KatGs) are unique peroxidases exhibiting a high catalase activity and a peroxidase activity with a wide range of artificial electron donors. Exchange of tyrosine 249 in Synechocystis KatG, a distal side residue found in all as yet sequenced KatGs, had dramatic consequences on the bifunctional activity and the spectral features of the redox intermediate compound II. The Y249F variant lost catalase activity but retained a peroxidase activity (substrates o-dianisidine, pyrogallol, guaiacol, tyrosine, and ascorbate) similar to the wild-type protein. In contrast to wild-type KatG and similar to monofunctional peroxidases, the formation of the redox intermediate compound I could be followed spectroscopically even by addition of equimolar hydrogen peroxide to ferric Y249F. The corresponding bimolecular rate constant was determined to be (1.1 +/- 0.1) x 107 m-1 s-1 (pH 7 and 15 degrees C), which is typical for most peroxidases. Additionally, for the first time a clear transition of compound I to an oxoferryl-like compound II with peaks at 418, 530, and 558 nm was monitored when one-electron donors were added to compound I. Rate constants of reaction of compound I and compound II with tyrosine ((5.0 +/- 0.3) x 104 m-1 s-1 and (1.7 +/- 0.4) x 102 m-1 s-1) and ascorbate ((1.3 +/- 0.2) x 104 m-1 s-1 and (8.8 +/- 0.1) x 101 m-1 s-1 at pH 7 and 15 degrees C) were determined by using the sequential stopped-flow technique. The relevance of these findings is discussed with respect to the bifunctional activity of KatGs and the recently published first crystal structure.     

Catalase-peroxidase (Mycobacterium tuberculosis KatG) catalysis and isoniazid activation

Resonance Raman spectra of native, overexpressed M. tuberculosis catalase-peroxidase (KatG), the enzyme responsible for activation of the antituberculosis antibiotic isoniazid (isonicotinic acid hydrazide), have confirmed that the heme iron in the resting (ferric) enzyme is high-spin five-coordinate. Difference Raman spectra did not reveal a change in coordination number upon binding of isoniazid to KatG. Stopped-flow spectrophotometric studies of the reaction of KatG with stoichiometric equivalents or small excesses of hydrogen peroxide revealed only the optical spectrum of the ferric enzyme with no hypervalent iron intermediates detected. Large excesses of hydrogen peroxide generated oxyferrous KatG, which was unstable and rapidly decayed to the ferric enzyme. Formation of a pseudo-stable intermediate sharing optical characteristics with the porphyrin pi-cation radical-ferryl iron species (Compound I) of horseradish peroxidase was observed upon reaction of KatG with excess 3-chloroperoxybenzoic acid, peroxyacetic acid, or tert-butylhydroperoxide (apparent second-order rate constants of 3.1 x 10(4), 1.2 x 10(4), and 25 M(-1) s(-1), respectively). Identification of the intermediate as KatG Compound I was confirmed using low-temperature electron paramagnetic resonance spectroscopy. Isoniazid, as well as ascorbate and potassium ferrocyanide, reduced KatG Compound I to the ferric enzyme without detectable formation of Compound II in stopped-flow measurements. This result differed from the reaction of horseradish peroxidase Compound I with isoniazid, during which Compound II was stably generated. These results demonstrate important mechanistic differences between a bacterial catalase-peroxidase and the homologous plant peroxidases and yeast cytochrome c peroxidase, in its reactions with peroxides as well as substrates.     

Mechanism of reaction of myeloperoxidase with nitrite

Myeloperoxidase (MPO) is a major neutrophil protein and may be involved in the nitration of tyrosine residues observed in a wide range of inflammatory diseases that involve neutrophils and macrophage activation. In order to clarify if nitrite could be a physiological substrate of myeloperoxidase, we investigated the reactions of the ferric enzyme and its redox intermediates, compound I and compound II, with nitrite under pre-steady state conditions by using sequential mixing stopped-flow analysis in the pH range 4-8. At 15 degrees C the rate of formation of the low spin MPO-nitrite complex is (2.5 +/- 0.2) x 10(4) m(-1) s(-1) at pH 7 and (2.2 +/- 0.7) x 10(6) m(-1) s(-1) at pH 5. The dissociation constant of nitrite bound to the native enzyme is 2.3 +/- 0.1 mm at pH 7 and 31.3 +/- 0.5 micrometer at pH 5. Nitrite is oxidized by two one-electron steps in the MPO peroxidase cycle. The second-order rate constant of reduction of compound I to compound II at 15 degrees C is (2.0 +/- 0.2) x 10(6) m(-1) s(-1) at pH 7 and (1.1 +/- 0.2) x 10(7) m(-1) s(-1) at pH 5. The rate constant of reduction of compound II to the ferric native enzyme at 15 degrees C is (5.5 +/- 0.1) x 10(2) m(-1) s(-1) at pH 7 and (8.9 +/- 1.6) x 10(4) m(-1) s(-1) at pH 5. pH dependence studies suggest that both complex formation between the ferric enzyme and nitrite and nitrite oxidation by compounds I and II are controlled by a residue with a pK(a) of (4.3 +/- 0.3). Protonation of this group (which is most likely the distal histidine) is necessary for optimum nitrite binding and oxidation.     

pH dependence of cyanide binding to the ferric heme domain of the direct oxygen sensor from Escherichia coli and the effect of alkaline denaturation

The spectrum of the ferric heme domain of the direct oxygen sensor protein from Escherichia coli ( EcDosH) has been measured between pH 3.0 and 12.6. EcDosH undergoes acid denaturation with an apparent p K a of 4.24 +/- 0.05 and a Hill coefficient of 3.1 +/- 0.6 and reversible alkaline denaturation with a p K a of 9.86 +/- 0.04 and a Hill coefficient of 1.1 +/- 0.1. Cyanide binding to EcDosH has been investigated between pH 4 and 11. The EcDosH-cyanide complex is most stable at pH 9 with a K D of 0.29 +/- 0.06 microM. The kinetics of cyanide binding are monophasic between pH 4 and 8. At pH >or=8.5, the reaction is biphasic with the fast phase dependent upon the cyanide concentration and the slow phase independent of cyanide. The slow phase is attributed to conversion of denatured EcDosH to the native state, with a pH-independent rate of 0.052 +/- 0.006 s (-1). The apparent association rate constant for cyanide binding to EcDosH increases from 3.6 +/- 0.1 M (-1) s (-1) at pH 4 to 520 +/- 20 M (-1) s (-1) at pH 11. The dissociation rate constant averages (8.6 +/- 1.3) x 10 (-5) s (-1) between pH 5 and 9, increasing to (1.4 +/- 0.1) x 10 (-3) s (-1) at pH 4 and (2.5 +/- 0.1) x 10 (-3) s (-1) at pH 12.2. The mechanism of cyanide binding is consistent with preferential binding of the cyanide anion to native EcDosH. The reactions of imidazole and H 2O 2 with ferric EcDosH were also investigated and show little reactivity.     

Mechanism of nitrite-stimulated catalysis by lactoperoxidase.

The reactions of lactoperoxidase (LPO) intermediates compound I, compound II and compound III, with nitrite (NO2(-)) were investigated. Reduction of compound I by NO2(-) was rapid (k2 = 2.3 x 10(7) M(-1) x s(-1); pH = 7.2) and compound II was not an intermediate, indicating that NO2* radicals are not produced when NO2(-) reacts with compound I. The second-order rate constant for the reaction of compound II with NO2(-) at pH = 7.2 was 3.5 x 10(5) M(-1) x s(-1). The reaction of compound III with NO2(-) exhibited saturation behaviour when the observed pseudo first-order rate constants were plotted against NO2(-) concentrations and could be quantitatively explained by the formation of a 1 : 1 ratio compound III/NO2(-) complex. The Km of compound III for NO2(-) was 1.7 x 10(-4) M and the first-order decay constant of the compound III/ NO2(-) complex was 12.5 +/- 0.6 s(-1). The second-order rate constant for the reaction of the complex with NO2(-) was 3.3 x 10(3) M(-1) x s(-1). Rate enhancement by NO2(-) does not require NO2* as a redox intermediate. NO2(-) accelerates the overall rate of catalysis by reducing compound II to the ferric state. With increasing levels of H2O2, there is an increased tendency for the catalytically dead-end intermediate compound III to form. Under these conditions, the 'rescue' reaction of NO2(-) with compound III to form compound II will maintain the peroxidatic cycle of the enzyme.     

Spectral and kinetic studies on eosinophil peroxidase compounds I and II and their reaction with ascorbate and tyrosine.

Eosinophil peroxidase, the major granule protein in eosinophils, is the least studied human peroxidase. Here, we have performed spectral and kinetic measurements to study the nature of eosinophil peroxidase intermediates, compounds I and II, and their reduction by the endogenous one-electron donors ascorbate and tyrosine using the sequential-mixing stopped-flow technique. We demonstrate that the peroxidase cycle of eosinophil peroxidase involves a ferryl/porphyrin radical compound I and a ferryl compound II. In the absence of electron donors, compound I is shown to be transformed to a species with a compound II-like spectrum. In the presence of ascorbate or tyrosine compound I is reduced to compound II with a second-order rate constant of (1.0+/-0.2)x10(6) M(-1) s(-1) and (3.5+/-0.2)x10(5) M(-1) s(-1), respectively (pH 7.0, 15 degrees C). Compound II is then reduced by ascorbate and tyrosine to native enzyme with a second-order rate constant of (6.7+/-0.06)x10(3) M(-1) s(-1) and (2.7+/-0.06)x10(4) M(-1) s(-1), respectively. This study revealed that eosinophil peroxidase compounds I and II are able to react with tyrosine and ascorbate via one-electron oxidations and therefore generate monodehydroascorbate and tyrosyl radicals. The relatively fast rates of the compound I reduction demonstrate that these reactions may take place in vivo and are physiologically relevant.     

Oxidation of hydroquinone, 2,3-dimethylhydroquinone and 2,3,5-trimethylhydroquinone by human myeloperoxidase

Myeloperoxidase is very susceptible to reducing radicals because the reduction potential of the ferric/ferrous redox couple is much higher compared with other peroxidases. Semiquinone radicals are known to reduce heme proteins. Therefore, the kinetics and spectra of the reactions of p-hydroquinone, 2,3-dimethylhydroquinone and 2,3,5-trimethylhydroquinone with compounds I and II were investigated using both sequential-mixing stopped-flow techniques and conventional spectrophotometric measurements. At pH 7 and 15 degrees C the rate constants for compound I reacting with p-hydroquinone, 2,3-dimethylhydroquinone and 2,3,5-trimethylhydroquinone were determined to be 5.6+/-0.4 x 10(7) M(-1)s(-1), 1.3+/-0.1 x 10(6) M(-1)s(-1) and 3.1+/-0.3 x 10(6) M(-1)s(-1), respectively. The corresponding reaction rates for compound II reduction were calculated to be 4.5+/-0.3 x 10(6) M(-1)s(-1), 1.9+/-0.1 x 10(5) M(-1)s(-1) and 4.5+/-0.2 x 10(4) M(-1)s(-1), respectively. Semiquinone radicals, produced by compounds I and II in the classical peroxidation cycle, promote compound III (oxymyeloperoxidase) formation. We could monitor formation of ferrous myeloperoxidase as well as its direct transition to compound II by addition of molecular oxygen. Formation of ferrous myeloperoxidase is shown to depend strongly on the reduction potential of the corresponding redox couple benzoquinone/semiquinone. With 2,3-dimethylhydroquinone and 2,3,5-trimethylhydroquinone as substrate, myeloperoxidase is extremely quickly trapped as compound III. These MPO-typical features could have potential in designing specific drugs which inhibit the production of hypochlorous acid and consequently attenuate inflammatory tissue damage.     

Oxidation of bis(terpyridine)cobalt(II) chloride by cytochrome c peroxidase compounds I and II

The bis(terpyridine)cobalt(II), Co(terpy)2(2+), reduction of cytochrome c peroxidase compound I, CcP-I, has been investigated using stopped-flow techniques as a function of ionic strength in pH 7.5 buffers at 25 degrees C. Co(terpy)2(2+) initially reduces the Trp191 radical site in CcP-I with an apparent second-order rate constant, k2, equal to 6.0+/-0.4x10(6) M(-1)s(-1) at 0.01 M ionic strength. A pseudo-first-order rate constant of 480 s(-1) was observed for the reduction of CcP-I by 79 microM Co(terpy)2(2+) at 0.01 M ionic strength. The one-electron reduction of CcP-I produces a second enzyme intermediate, CcP compound II (CcP-II), which contains an oxyferryl, Fe(IV), heme. Reduction of the Fe(IV) heme in CcP-II by Co(terpy)2(2+) shows saturation kinetics with a maximum observed rate constant, k3max, of 24+/-2 s(-1) at 0.01 M ionic strength. At low reductant concentrations, the apparent second-order rate constant for Co(terpy)2(2+) reduction of CcP-II, k3, is 1.2+/-0.5x10(6) M(-1) s-1. All three rate constants decrease with increasing ionic strength. At 0.10 M ionic strength, values of k2, k3, and k3max decrease to 6.0+/-0.8x10(5) M(-1) s(-1), 1.2+/-0.5x10(5) M(-1) s(-1), and 11+/-3 s(-1), respectively. Both the product, Co(terpy)2(3+), and ferricytochrome c inhibit the rate of Co(terpy)2(2+) reduction of CcP-I and CcP-II. Gel-filtration studies show that a minimum of two Co(terpy)2(3+) molecules bind to the native enzyme in low ionic strength buffers.     

The catalytic role of the distal site asparagine-histidine couple in catalase-peroxidases.

Catalase-peroxidases (KatGs) are unique in exhibiting an overwhelming catalase activity and a peroxidase activity of broad specificity. Similar to other peroxidases the distal histidine in KatGs forms a hydrogen bond with an adjacent conserved asparagine. To investigate the catalytic role(s) of this potential hydrogen bond in the bifunctional activity of KatGs, Asn153 in Synechocystis KatG was replaced with either Ala (Asn153-->Ala) or Asp (Asn153-->Asp). Both variants exhibit an overall peroxidase activity similar with wild-type KatG. Cyanide binding is monophasic, however, the second-order binding rates are reduced to 5.4% (Asn153-->Ala) and 9.5% (Asn153-->Asp) of the value of native KatG [(4.8 +/- 0.4) x 105 m-1.s-1 at pH 7 and 15 degrees C]. The turnover number of catalase activity of Asn153-->Ala is 6% and that of Asn153-->Asp is 16.5% of wild-type activity. Stopped-flow analysis of the reaction of the ferric forms with H2O2 suggest that exchange of Asn did not shift significantly the ratio of rates of H2O2-mediated compound I formation and reduction. Both rates seem to be reduced most probably because (a) the lower basicity of His123 hampers its function as acid-base catalyst and (b) Asn153 is part of an extended KatG-typical H-bond network, the integrity of which seems to be essential to provide optimal conditions for binding and oxidation of the second H2O2 molecule necessary in the catalase reaction.     

Distal site aspartate is essential in the catalase activity of catalase-peroxidases

Structural and biochemical characterization of aspartate 152 at the distal heme side of catalase-peroxidase (KatG) from Synechocystis PCC 6803 reveals an important functional role for this residue. In the wild-type protein, the side chain carboxyl group of Asp152 is 7.8 A apart from the heme iron and is hydrogen-bonded to two water molecules and a KatG-specific large loop. We have prepared the site-specific variants Asp152Asn, Asp152Ser, Asp152Trp, and Pro151Ala. Exchange of Asp152 exhibited dramatic consequences on the bifunctional activity of this unique peroxidase. The turnover number of catalase activity of Asp152Asn is 2.7%, Asp152Ser 5.7%, and Asp152Trp is 0.6% of wild-type activity. By contrast, the peroxidase activity of the Asp152 variants was 2-7 times higher than that of wild-type KatG or Pro151Ala. The KatG-specific pH profile of the catalase activity was completely different in these variants and exchange of Asp152 made it possible to follow the transition of the ferric enzyme to the redox intermediate compound I by hydrogen peroxide spectroscopically and to determine the corresponding bimolecular rate constant to be 7.5 x 10(6) M(-1) s(-1) (pH 7 and 15 degrees C). The reactivity of compound I toward aromatic one-electron donors was enhanced in the Asp152 variants compared with the wild-type protein, whereas the reactivity toward hydrogen peroxide was dramatically decreased. A mechanism for the hydrogen peroxide oxidation, which is different from monofunctional catalases and involves the distal residues Trp122 and Asp152, is proposed.     

Reaction of lactoperoxidase compound I with halides and thiocyanate

Lactoperoxidase (LPO) is found in mucosal surfaces and exocrine secretions, including milk, tears, and saliva, and has physiological significance in antimicrobial defense which involves (pseudo-) halide oxidation. This study for the first time presents transient kinetic measurements of the reactivity of its competent redox intermediate compound I with halides and thiocyanate, using the sequential stopped-flow technique. Compound I was produced with either H(2)O(2) [(1.1 +/- 0.1) x 10(7) M(-1) s(-1)] or hypochlorous acid [(3.2 +/- 0.1) x 10(7) M(-1) (s-1)]. At pH 7 and 15 degrees C, the two-electron reduction of compound I to native LPO by bromide and iodide has a second-order rate constant of (4.1 +/- 0.1) x 10(4) M(-1) s(-1) and (1.2 +/- 0.04) x 10(8) M(-1) s(-1), respectively. With thiocyanate the reaction is extremely fast (2.0 x 10(8) M(-1) s(-1)), whereas chloride cannot function as electron donor. The results are discussed with respect to known kinetic data of homologous mammalian peroxidases and to the physiological role of LPO in antimicrobial defense.     

Oxidation of clozapine and ascorbate by myeloperoxidase.

The kinetics and spectra of the reactions of clozapine with compounds I and II of myeloperoxidase were investigated using both single- and sequential-mixing stopped-flow techniques, steady-state kinetics, and spectrophotometric measurements. The results show conclusively that both compounds I and II are reduced in one-electron reactions with clozapine. At pH 7.0 the rate constant for compound I reacting with clozapine is (1.5 +/- 0.1) x 10(6) M(-1) s(-1) and for compound II (4.8 +/- 0.1) x 10(4) M(-1) s(-1). The physiological pH of 7.4 was found to be optimal for the oxidation of clozapine by compound I. The rate constant for compound I reacting with ascorbate is (1.1 +/- 0.1) x 10(6) M(-1) s(-1) and for compound II (1.1 +/- 0.2) x 10(4) M(-1) s(-1), both obtained at pH 7.0. Experiments with both clozapine and ascorbate present showed that ascorbate acts both as a competitive inhibitor and free radical scavenger.     

Reactions of soybean peroxidase and hydrogen peroxide pH 2.4-12.0, and veratryl alcohol at pH 2.4

Peroxidase from soybean seed coat (SBP) has properties that makes it particularly suited for practical applications. Therefore, it is essential to know its fundamental enzymatic properties. Stopped-flow techniques were used to investigate the pH dependence of the reaction of SBP and hydrogen peroxide. The reaction is linearly dependent on hydrogen peroxide concentration at acidic and neutral pH with the second order rate constant k(1)=2.0x10(7) M(-1) s(-1), pH 4-8. From pH 9.3 to 10.2 the reaction is biphasic, a novel observation for a peroxidase at alkaline pH. A fast reaction has the characteristics of the reaction at neutral pH, and a slow reaction shows hyperbolic dependence on hydrogen peroxide concentration. At pH >10.5 only the slow reaction is seen. The shift in mechanism is coincident with the change in haem iron co-ordination to a six-coordinate low spin hydroxy ligated alkaline form. The pK(a) value for the alkaline transition was observed at 9.7+/-0.1, 9.6+/-0.1 and 9.9+/-0.2 by spectrophotometric titration, the fast phase amplitude, and decrease in the apparent second order rate constant, respectively. An acidic pK(a) at 3.2+/-0.3 was also determined from the apparent second order rate constant. The reactions of soybean peroxidase compounds I and II with veratryl alcohol at pH 2.44 give very similar second order rate constants, k(2)=(2.5+/-0.1)x10(4) M(-1) s(-1) and k(3)=(2.2+/-0.1)x10(4) M(-1) s(-1), respectively, which is unusual. The electronic absorption spectra of compounds I, II and III at pH 7.07 show characteristic bands at 400 and 651 nm (compound I), 416, 527 and 555 nm (compound II), and 414, 541 and 576 nm (compound III). No additional intermediates were observed.