DNA complexes, formed on aqueous phase surfaces: new planar polymeric and composite nanostructures

The formation of DNA complexes with Langmuir monolayers of the cationic lipid octadecylamine (ODA) and the new amphiphilic polycation poly-4-vinylpyridine with 16% of cetylpyridinium groups (PVP-16) on the surface of an aqueous solution of native DNA of low ionic strength was studied. Topographic images of Langmuir-Blodgett films of DNA/ODA and DNA/PVP-16 complexes applied to micaceous substrates were investigated by the method of atomic force microscopy. It was found that films of the amphiphilic polycation have an ordered planar polycrystalline structure. The morphology of planar DNA complexes with the amphiphilic cation substantially depended on the incubation time and the phase state of the monolayer on the surface of the aqueous DNA solution. Complex structures and individual DNA molecules were observed on the surface of the amphiphilic monolayer. Along with quasi-linear individual bound DNA molecules, characteristic extended net-like structures and quasi-circular toroidal condensed conformations of planar DNA complexes were detected. Mono- and multilayer films of DNA/PVP-16 complexes were used as templates and nanoreactors for the synthesis of inorganic nanostructures via the binding of metal cations from the solution and subsequent generation of the inorganic phase. As a result, ultrathin polymeric composite films with integrated DNA building blocks and quasi-linear arrays of inorganic semiconductor (CdS) and iron oxide nanoparticles and nanowires were obtained. The nanostructures obtained were characterized by scanning probe microscopy and transmission electron microscopy techniques. The methods developed are promising for investigating the mechanisms of structural organization and transformation in DNA and polyelectrolyte complexes at the gas-liquid interface and for the design of new extremely thin highly ordered planar polymeric and composite materials, films, and coatings with controlled ultrastructure for applications in nanoelectronics and nanobiotechnology.     

Divalent cation-induced interaction of phospholipid vesicle and monolayer membranes

The effects of phospholipid vesicles and divalent cations in the subphase solution on the surface tension of phospholipid monolayer membranes were studied in order to elucidate the nature of the divalent cation-induced vesicle-membrane interaction. The monolayers were formed at the air/water interface. Various concentrations of unilamellar phospholipid (phosphatidylserine, phosphatidylcholine and their mixtures) vesicles and divalent cations (Mg²⁺, Ca²⁺, Mn²⁺, etc.) were introduced into the subphase solution of the monolayers. The changes of surface tension of monolayers were measured by the Wilhelmy plate (Teflon) method with respect to divalent ion concentrations and time.When a monolayer of phosphatidylserine and vesicles of phosphatidylserine/phosphatidylcholine (1 : 1) were used, there were critical concentrations of divalent cations to produce a large reduction in surface tension of the monolayer. These concentrations were 16 mM for Mg²⁺, 7 mM for Sr²⁺, 6 mM for Ca²⁺, 3.5 mM for Ba²⁺ and 1.8 mM for Mn²⁺. On the other hand, for a phosphatidylcholine monolayer and phosphatidylcholine vesicles, there was no change in surface tension of the monolayer up to 25 mM of any divalent ion used. When a phosphatidylserine monolayer and phosphatidylcholine vesicles were used, the order of divalent ions to effect the large reduction of surface tension was Mn²⁺ > Ca²⁺ > Mg²⁺ and their critical concentrations were in between the former two cases. The threshold concentrations also depended upon vesicle concentrations as well as the area/molecule of monolayers. For phosphatidylserine monolayers and phosphatidylserine/phosphatidylcholine (1 : 1) vesicles, above the critical concentrations of Mn²⁺ and Ca²⁺, the surface tension decreased to a value close to the equilibrium pressure of the monolayers within 0.5 h.This decrease in surface tension of the monolayers is interpreted partly as the consequence of fusion of the vesicles with the monolayer membranes. The     

Conformation of poly(l-glutamic acid) at the air/water interface

The conformation of the monolayer of poly(l-glutamic acid) on subsolutions of different pH values was studied by the film-balance technique, obtaining surface pressure measurements, together with polarized infrared spectroscopy and Raman spectroscopy. The monolayers of poly(l-glutamic acid) gave different surface pressure-area curves on subsolutions of various pH values. It was found that the conformation of poly(l-glutamic acid) monolayer spread at the air/water interface differs from that in solution. It can be presumed that poly(l-glutamic acid) in a monolayer is in the form of an α-helix at pH 2.0, in the β-form at pH 3.5 and in an ‘intramolecular’ heterogeneous conformation (consisting of a random coil and an α-helix) at pH 4.0.     

Interactions of phospholipid monolayers with carbohydrates

Surface pressure studies of phospholipid monomolecular films of dimyristoylphosphatidylcholine (DMPC) and dipalmitoylphosphatidylcholine (DPPC) formed at an air/water interface have been made and the effects on the films studied when various carbohydrates are present in the subphase. The results obtained show that at a given temperature, the area per molecule of DPPC increases with increasing concentration of the carbohydrate in the subphase. The carbohydrate which has the greatest expanding effect on the phospholipid monolayer is glycerol, followed in turn by trehalose, sucrose, glucose, raffinose, and inositol. The mechanism of monolayer expansion by glycerol is different from that observed in other carbohydrates, as the following experiments demonstrate. Below the phase transition temperature of DPPC, the area per molecule of DPPC at a pressure of 12.5 dyn/cm is the same with and without glycerol in the subphase. However, when the monolayer is heated to a temperature above the phase transition temperature for DPPC, the area/molecule on glycerol is considerably greater than the area/molecule on water at the same surface pressure. Cooling the monolayer back to the lower temperature produces an area/molecule of DPPC which is identical on both water and glycerol subphases. Glycerol therefore has no effect on the low-temperature (condensed) monolayers but causes expansion of the high-temperature (expanded) monolayers. By contrast with glycerol, both trehalose and sucrose interact with the DPPC monolayer producing an increased area/molecule over that observed on water, both with low-temperature (condensed) monolayers and with the high-temperature (expanded) monolayers. The efficiency of these carbohydrates at expanding the monolayer films (with the exception of glycerol) shows a strong correlation with their ability to stabilize membrane structure and function at low water contents.     

Surface active properties of amphiphilic sequential isopeptides: Comparison between alpha-helical and beta-sheet conformations

Poly(Leu-Lys-Lys-Leu) and poly(Leu-Lys) are sequential amphiphilic peptide isomers that adopt respectively an alpha-helical conformation and a beta-sheet structure in saline solutions and at the air/water interface. The surface active properties of LKKL and LK sequential isopeptides containing 16, 20, and n residues have been compared in order to evaluate the contributions of the alpha-helical and beta-sheet conformations. Both have a natural tendency to spread at the surface of a saline solution and the values of the equilibrium spreading pressure pi(e) lie in the same range. When dissolved in a saline solution, alpha-helical peptides diffuse faster and adsorb faster at the interface than the beta-sheet isomers. From the compression isotherms of LKKL and LK peptide monolayers it is possible to extract parameters that characterize the behavior of alpha-helical and beta-sheet conformations: beta-sheet peptide monolayers are more stable and less compressible than the monolayers formed with the alpha-helical isomers. The LK peptides differ also by their high degree of self-association at the air/water interface. Copyright 1999 John Wiley & Sons, Inc.     

A long-lived amphiphilic fluorescent probe studied in POPC air-water monolayer and solution bilayer systems.

A novel amphiphilic fluorescent probe (Fluorazophore-L) with a strongly dipolar, nonionic azoalkane as headgroup and a palmitoyl tail has been synthesized and characterized. Pure Fluorazophore-L was found to be sufficiently amphiphilic to form stable air-water monolayers. An analysis of the surface pressure versus area suggests an area per molecule of about 34+/-2 A(2) at 29 mN m(-1). The partitioning into a lipid membrane model was quantified at the air-water interface by spreading 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) monolayers. Measurements with different molar fractions of Fluorazophore-L revealed a small but significant reduction of the mean area in the mixed monolayer. The excess free energy of mixing (-0.5+/-0.1 kT) indicated a weakly attractive interaction slightly above thermal energy, suggesting a good miscibility of the fluorescent probe within the lipid monolayer without major structural modifications. Spectroscopic measurements confirmed the incorporation of Fluorazophore-L into POPC vesicles. The fluorescence lifetime was very long (125+/-5 ns under air) with monoexponential fluorescence decays.     

Fabrication of Langmuir-Blodgett film of a fullerene derivative with a cyclic peptide as an anchor

A novel cyclic octapeptide carrying a fullerene unit and poly(ethylene glycol) at the side chain (cyclo8-C 60 + PEG) was synthesized, and its monolayer formation at the air/water interface and on a substrate was studied. Surface pressure-area per molecule isotherms indicated that cyclo8-C 60 + PEG formed a stable monolayer at the air/water interface. The cyclo8-C 60 + PEG monolayers prepared from various spreading volumes (i.e., from various initial areas per molecule) overlapped nicely on a single curve, suggesting that the molecules were uniformly dispersed on the surface without aggregation of the fullerene units. The uniform dispersibility is due to the scaffold effect of the cyclic peptide unit to keep the fullerene units away from each other. The formed monolayer could be quantitatively transferred onto a solid substrate. UV-vis absorption spectroscopy of the Langmuir-Blodgett (LB) monolayer showed that the electronic structure of the fullerene unit was not affected by the formation of the monolayer. Cyclic voltammetry of the LB monolayer in an aqueous solution containing redox species indicated that the LB monolayer was densely packed. Furthermore, reversible redox peaks attributed to the one-electron reduction of the fullerene unit were observed, showing that the redox property of the fullerene unit was also retained in the monolayer. It is thus concluded that the cyclic peptide is a good candidate as a scaffold for stable monolayer formation at the air/water interface and for intact immobilization of the fullerene moiety onto a substrate.     

Formation and properties of Langmuir and Gibbs monolayers: a comparative study using hydrogenated and partially fluorinated amphiphilic derivatives of mannitol

The synthesis and surface behavior of a series of nine new hydrogenated nonionic surfactants and their fluorinated analogs, derived from D-mannitol are described. Adsorption monolayers (Gibbs monolayers) were studied by surface pressure (H) measurements as a function of time. For the spread monolayers (Langmuir monolayers), the measurements of surface pressure versus molecular area (A) were performed. For the most hydrophobic amphiphiles at low concentrations, the adsorption at the air/water interface from the bulk solution required extremely long times to attain equilibrium. The A values for two compounds which could be studied in both adsorbed and spread monolayers provided data allowing a direct comparison of the properties of the two types of films formed at the air/water interface. In spite of different mechanisms of formation of Langmuir and Gibbs monolayers, their characteristic parameters were identical, proving the equivalence of these two types of structures.     

Spread mixed monolayers of deoxycholic and dehydrocholic acids at the air-water interface, effect of subphase pH. Characterization by axisymmetric drop shape analysis

Bile acids (deoxycholic and dehydrocholic acids) spread mixed monolayers behavior at the air/water interface were studied as a function of subphase pH using a constant surface pressure penetration Langmuir balance based on the Axisymmetric Drop Shape Analysis (ADSA). We examined the influence of electrostatic, hydrophobic and hydration forces on the interaction between amphiphilic molecules at the interface by the collapse area values, the thermodynamic parameters and equation of state virial coefficients analysis. The obtained results showed that at neutral (pH=6.7) or basic (pH=10) subphase conditions the collapse areas values are similar to that of cholanoic acid and consistent with the cross-sectional area of the steroid nucleus (approximately 40 A(2)). The Gibbs energy of mixing values (DeltaG(mix)<0) and the first virial coefficients of the equation of state (b(0)<1) indicated that a miscible monolayer with laterally structured microdomains existed. The aggregation number (1/b(0)) was estimated within the order of 6 (pH=6.7) and 3 (pH=10). At pH=3.2, acidic subphase conditions, no phase separation occurs (DeltaG(mix)<0) but a high expanded effect of the monolayer could be noted. The mixed monolayer behavior was no ideal and no aggregates were formed (b(0)> or =1). Such behavior indicates that the polar groups of the molecules interacts each other more strongly by repulsive electrostatic forces than with the more hydrophobic part of the molecule.     

The surface properties of apolipoproteins A-I and A-II at the lipid/water interface

The monolayer system was employed to investigate the relative affinities of apolipoproteins A-I and A-II for the lipid/water interface. The adsorption of reductively 14C-methylated apolipoproteins to phospholipid monolayers spread at the air/water interface was determined by monitoring the surface pressure of the mixed monolayer and the surface concentration of the apoprotein. ApoA-II has a higher affinity than apoA-I for lipid monolayers; for a given initial surface pressure, apoA-II adsorbs more than apoA-I to monolayers of egg phosphatidylcholine (PC), distearoyl-PC and human high-density lipoprotein (HDL3) surface lipids. Comparison of the molecular packing of apolipoproteins A-I and A-II suggests that apoA-II adopts a more condensed conformation at the lipid/water interface compared to apoA-I. The ability of apoA-II to displace apoA-I from egg PC and HDL3 surface lipid monolayers was studied by following the adsorption and desorption of the reductively 14C-methylated apolipoproteins. At saturating subphase concentrations of the apoproteins (3.10(-5) g/100 ml), two molecules of apoA-II absorbed for each molecule of apoA-I displaced. This displacement was accompanied by an increase in surface pressure. An identical stoichiometry for the displacement of apoA-I from HDL particles by apoA-II has been reported by others. At low subphase concentrations of apoproteins (5.10(-6) g/100 ml), the apoA-I/lipid monolayer was not fully compressed and could accommodate the adsorbing apoA-II molecules without displacement of apoA-I molecules. ApoA-I molecules were unable to displace apoA-II from the lipid/water interface. The average residue hydrophobicity of apoA-II is higher than that of apoA-I; this may contribute to the higher affinity of apoA-II for lipids compared to apoA-I. The probable helical regions in apolipoproteins A-I and A-II were located using a secondary structure prediction algorithm. The analysis suggests that the amphiphilic properties of the alpha-helical regions of apoA-I and apoA-II are probably not significantly different. Further understanding of the differences in surface activity of these apolipoproteins will require more knowledge of their secondary and tertiary structures.     

The influence of headgroup structure and fatty acyl chain saturation of phospholipids on monolayer behavior: a comparative rheological study

This paper compares six phospholipidic monolayers at the water/chloroform interface by performing dilational rheological measurements with a drop tensiometer apparatus. The chosen lipids differ both in their headgroup structure and fatty acyl chain saturation or symmetry. The study concentrated on monolayers formed with DPPC, DPPE, DOPC, DOPE, POPC and POPE. Using a generalized Maxwell rheological model, transposed at the interface, the intimate intermolecular interactions between amphiphilic molecules are studied on and off the monolayer plane. The equilibrium and nonequilibrium phenomena are analyzed and, respectively, correlated with monolayer cohesion and with monolayer/sub-surface interactions. The purpose of this work is to gain further insights into the influences (as slight as they are) of the weak changes in phospholipid structure and on the behavior of the monolayers. The results, widely described, provide further details on nuances existing between very similar molecules, and likewise, on the synergies created between the different effects.     

X-ray diffraction and foam film investigations of PC head group interaction in water/ethanol mixtures

The influence of ethanol on single phospholipid monolayers at the water/air interface and in foam films has been investigated. Grazing incidence X-ray diffraction investigations (GIXD) of Langmuir monolayers from 1,2-distearoyl-phosphatidylcholine (DSPC) spread on water subphases with different amounts of ethanol were performed. The thickness and free specific energy of formation of foam films stabilized by 1,2-dimyristoyl-phosphatidylcholine (DMPC) at different concentrations of ethanol in the film forming dispersions were measured. The GIXD investigations show that the tilt angle of the alkyl chains in the PC lipid monolayer decreases with increasing concentration of ethanol caused by a decrease of the diameter of the head groups. With increasing ethanol content of the solution also the thickness of the aqueous core of PC lipid foam films decreases. We assume that ethanol causes a decreasing probability for the formation of hydrogen bonds of water molecules to the PC head groups. The distinct difference between the effects of ethanol on lipid bilayers as described in the literature and on monolayers and foam films found in this study is discussed. Whereas PC monolayers at the water/air interface become unstable above 25 vol.% ethanol, the PC foam films are stable up to 50 vol.% ethanol. This is related to the decrease of the surface excess energy per lipid molecule by the interaction between the two film surfaces.     

Structural study of poly(beta-benzyl-L-aspartate) monolayers at air-liquid interfaces.

As normally studied, in the solid state or in solution, poly(beta-benzyl-L-aspartate) (PBLA) differs from the other helical polyamino acids in that its alpha-helical conformation is most stable in the left-handed rather than in the right-handed form. The slightly lower energy per residue for the left-handed form in PBLA is easily perturbed, however. The helical screw sense can be inverted in a polar environment and, upon heating above 100 degrees C, a distorted left-handed helix or omega-helix is irreversibly formed. From external reflectance Fourier transform infrared measurements at the air-water interface, the conformation of PBLA in the monolayer state is directly established for the first time. The infrared frequencies of the amide bands suggest that right-handed alpha-helices are formed on the surface of water immediately after spreading the monolayers and independently of the polypeptide conformational distribution in the spreading solution. The right-handed helical form prevails throughout the slow compression of the Langmuir monolayers to collapsed films. The helical screw sense can be reversed by lowering the polarity of the aqueous phase. In addition, an alternate conformation similar to the omega-helix forms on addition of small amounts of isopropanol to the aqueous subphase, and appears to be an intermediate in the helix-helix transition.     

Vectorially oriented monolayers of the cytochrome c/cytochrome oxidase bimolecular complex.

Vectorially oriented monolayers of yeast cytochrome c and its bimolecular complex with bovine heart cytochrome c oxidase have been formed by self-assembly from solution. Both quartz and Ge/Si multilayer substrates were chemical vapor deposited with an amine-terminated alkylsiloxane monolayer that was then reacted with a hetero-bifunctional cross-linking reagent, and the resulting maleimide endgroup surface then provided for covalent interactions with the naturally occurring single surface cysteine 102 of the yeast cytochrome c. The bimolecular complex was formed by further incubating these cytochrome c monolayers in detergent-solubilized cytochrome oxidase. The sequential formation of such monolayers and the vectorially oriented nature of the cytochrome oxidase was studied via meridional x-ray diffraction, which directly provided electron density profiles of the protein(s) along the axis normal to the substrate plane. The nature of these profiles is consistent with previous work performed on vectorially oriented monolayers of either cytochrome c or cytochrome oxidase alone. Furthermore, optical spectroscopy has indicated that the rate of binding of cytochrome oxidase to the cytochrome c monolayer is an order of magnitude faster than the binding of cytochrome oxidase to an amine-terminated surface that was meant to mimic the ring of lysine residues around the heme edge of cytochrome c, which are known to be involved in the binding of this protein to cytochrome oxidase.     

Comparative monolayer investigations of surface properties of negatively charged glycosphingolipids from vertebrates (gangliosides) and invertebrates (SGL-II, lipid IV)

The surface properties of four negatively charged glycosphingolipids from vertebrates, the sialo-glycosphingolipids (= gangliosides) GM1, GD1a, GT1b and a sulfo-glycosphingolipid (= sulfatide), and of the two negatively charged glycosphingolipids from lower invertebrates, the glucurono-glycosphingolipid Lipid IV and the aminophosphono-glycosphingolipid SGL-II were investigated in monolayers at the air/water interface. The molecular peculiarities under investigation were surface pressure (pi) and surface potential (delta V) which are described for Lipid IV and SGL-II for the first time. The surface pressure/area isotherms of all glycosphingolipids were typical of a liquid-expanded monolayer and, with the exception of SGL-II, exhibited a phase transition to a liquid-condensed state at surface pressures above 20 mN/m. The surface potential/molecular area data found for gangliosides in the closely packed state at pi = 30 mN/m (GM1: delta V = -17 mV; GD1a: delta V = -35 mV; GT1b: delta V = -39 mV) showed only a slight influence of the additional number of negatively charged residues. For Lipid IV, the surface behavior was very similar to GM1 both possessing one negative group per molecule, whereas in SGL-II also the surface potential data (delta V = +173 mV) were different compared with GD1a both possessing two negative groups per molecule. The addition of Ca2+ condensed the monolayers of all glycolipids and increased the potential in the direction to more positive values, but these findings were less effective in SGL-II films. On the basis of monolayer results presented here, in biological membranes of invertebrates especially Lipid IV might play a similar role as the ganglioside GM1 in vertebrate cells.     

Electrostatic interactions of colicin E1 with the surface of Escherichia coli total lipid

The surface properties of colicin E1, a 522-amino acid protein, and its interaction with monolayers of Escherichia coli (E. coli) total lipid and 1,2-Dimyristoyl-sn-Glycero-3-Phosphocholine (DOPC) were studied using the Langmuir-Blodgett (LB) technique. Colicin E1 is amphiphilic, forming a protein monolayer at the air/buffer interface. The protein is thought to interact with the E. coli total lipid head groups through electrostatic interactions, followed by its insertion into the lipid monolayers. Supported lipid bilayers (SLBs) of E. coli total lipid and DOPC, deposited onto mica at the cell membrane equivalence pressure for E. coli and incubated with colicin E1, were imaged by contact mode atomic force microscopy (CM-AFM). Colicin E1 formed protein aggregates on DOPC SLBs, while E. coli total lipid SLB was deformed following its incubation with colicin E1. Corresponding lateral force images, along with electrostatic surface potentials for colicin E1 P190, imply a direct interaction of colicin E1 with lipid head groups facilitating their charge neutralization.     

Novel Precursors of Fluorescent Dyes. 1. Interaction of the Dyes with Model Phospholipid in Monolayers

Photoactivated (“caged”) fluorescent dyes are modern tools for structure and function studies of cell membranes and subcellular organelles. Recently synthesized precursors of rhodamine fluorescent dyes (abbreviations PFD813 and PFD814) important for microscopic probing of biological objects have been studied in solution. In order to characterize the behavior at interfaces, monolayers of PFD813 and PFD814 on water have been formed and investigated. The interactions of these precursors with the biomembrane component dimyristoylphosphatidylethanolamine in monolayers at the air–water interface and after transfer to glass plates have been studied by measuring monolayer parameters and spectroscopic properties before and after photo-chemical formation of the fluorescent rhodamine dyes Rho813 and Rho814, respectively.     

Fucosyled neoglycolipids: synthesis and interaction with a phospholipid

The interfacial behavior of the neoglycolipids formed of Guerbet alcohol (G(28)) bound to a triethylene glycol spacer (E(3)) and to a sugar moiety (alpha- and beta-fucose) spread at the air/water interface has been studied under dynamic conditions of compression. Although the alpha (alpha-FucE3G28)- and beta-fucose (beta-FucE3G28) derivatives possessed the same chemical structure, the positioning of the sugar moiety relative to the whole molecule had a significant influence on the organization of neoglycolipid molecules in the spread monolayers. Thus, beta-fucose molecules exhibited higher compressibilities and larger molecular areas than a alpha/beta (84/16%) mixture (alpha(84)-FucE3G28). The comparison of the compressional behavior of the fucose derivatives with that of Guerbet alcohol in the absence and in the presence of the triethylene glycol spacer shows that the presence of the E(3) chain is necessary to stabilize the lipid at the interface and that the incorporation of a sugar moiety into the molecule resulted in an important expansion of a monolayer. Despite their different interfacial behaviors, the two sugar derivatives formed ideal mixtures when cospread at the air/water interface. Conversely, in the presence of a phospholipid, such as DMPC, repulsive interactions were observed and appeared to be stronger for DMPC/alpha(84)-FucE3G28 mixed monolayers. The membrane fluidity of DMPC liposomes bearing the studied amphiphilic molecules was assessed by fluorescence depolarization measurements. The results reveal that whereas G(28) was deeply inserted into the liposome bilayers, the presence of a E(3) chain and of a sugar moiety in these bilayers induced a transfer of the amphiphilic derivatives from the hydrophobic core towards polar headgroups of phospholipid molecules.     

Modulation of tetracycline-phospholipid interactions by tuning of pH at the water-air interface

This paper is part of a systematic study of the interactions of tetracycline antibiotics with phospholipid monolayers at the water-air interface. Tetracyclines are widespread antibiotics that undergo a series of protonation equilibria in solution, depending on the pH. The surface activity of tetracyclines was determined by means of surface tension measurements for three different systems, i.e. water, TRIS and McIlvaine-EDTA buffer. Surface pressure-molecular area and surface potential-molecular area isotherms were acquired for dipalmitoylphosphatidic acid monolayers on TRIS buffer (pH=7.0) and McIlvaine-EDTA buffer (pH=4.0) solution as a function of tetracycline concentration in the subphase. Comparative analysis of surface potential data, with the molecular dipole moment of tetracycline obtained from semiempirical calculations, provided information on the orientation of tetracycline at the interface. Surface pressure measurements as a function of monolayer compression were described, applying either a continuous partition model or Langmuir adsorption isotherms. The results obtained in the case of buffer solutions were compared to those obtained for tetracycline in water subphases. The analysis of the results indicated that electrostatic interactions dictate the migration of tetracycline to the monolayer interface. Penetration of the molecule to the lipophilic portion of the monolayer was unlikely, especially at high surface pressures. The results showed that stronger interactions are established between the zwitterionic tetracycline and the deprotonated phosphatidic group in TRIS buffer solution; in this case, tetracycline binds at the monolayer interface following a Langmuir type adsorption. In the case of water, where the monodeprotonated acid and the tetracycline zwitterions are the only species involved, the data can be described by continuous partition of tetracycline between interfacial and bulk phases. The same holds for McIlvaine-EDTA buffer subphases, although the high concentrations of citrate ions in this buffer competitively interfere with tetracycline association at the monolayer interface.     

Cholesterol oxidase susceptibility of cholesterol and 5-androsten-3 beta-ol in pure sterol monolayers and in mixed monolayers containing 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine.

This study has examined the importance of the isocaproic side chain at C-17 of cholesterol to sterol/phospholipid interactions in monolayer membranes and to the cholesterol oxidase-susceptibility of cholesterol in pure and mixed monolayers at the air/water interface. The interactions between cholesterol or 5-androsten-3 beta-ol (which lacks the C-17 side chain) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) in monolayers indicated that 5-androsten-3 beta-ol was not very efficient in causing condensation of the monolayer packing of POPC. Whereas cholesterol condensed the packing of POPC at all molar fractions examined (i.e., 0.25, 0.50 and 0.75 with regard to POPC), 5-androsten-3 beta-ol caused a slight condensing effect on POPC packing only in the equimolar mixture. The mean molecular area requirement of 5-androsten-3 beta-ol (in pure sterol monolayers at different lateral surface pressures) was 2.2-6.7% less than that observed for cholesterol. The pure 5-androsten-3 beta-ol monolayer also collapsed at lower lateral surface pressures compared with the pure cholesterol monolayer (34 mN/m and 45 mN/m, respectively). The cholesterol oxidase (Streptomyces sp.) catalyzed oxidation of cholesterol or 5-androsten-3 beta-ol in pure monolayers in the air/water interface (10 mN/m) proceeded with very similar rates, indicating that the enzyme did not recognize that the C-17 side chain of 5-androsten-3 beta-ol was missing. The oxidation of cholesterol or 5-androsten-3 beta-ol in mixed POPC-containing monolayers (equimolar mixture) also revealed similar reaction rates, although the reaction was slower in the mixed monolayer compared with the pure sterol monolayer. When the oxidation of cholesterol and 5-androsten-3 beta-ol was examined by monitoring the production of H2O2 (the sterol was solubilized in 2-propanol and the assay conducted in phosphate buffer), the maximal reaction rate observed with 5-androsten-3 beta-ol was only about 41% of that measured with cholesterol. From the cholesterol oxidase point-of-view, it can be concluded that the enzyme did not recognize the C-17 side chain of cholesterol (or lack of it in 5-androsten-3 beta-ol), when the sterol was properly oriented as a monolayer at the air/water interface. However, when the substrate was presented to the enzyme in a less controlled orientation (organic solvent in water), 5-androsten-3 beta-ol may have oriented itself unfavorably compared with the orientation of cholesterol, thereby leading to slower oxidation rates.