Solvent effects in N-carboxyanhydride (NCA) polymerization initiated by strong base type initiators

The γ-benzyl-L -glutamate N-carboxyanhydride (NCA) polymerization initialed by diisopropylamine was studied in dimethylformamide (DMF)-dioxane mixtures of different compositions. It was found that the shape of the conversion versus time plots and the molecular weights of the polymers depend on the solvent composition. Auto-catalysis is present only when dioxane predominates in the solvent mixtures. Moreover, the molecular weight of the final polymer depends strongly on the precipitation conditions when the polymerization is carried out in DMF.     

DNA conformation in N,N-dimethyl formamide-H2O solutions

Optical density, viscosity, and light scattering measurements for calf thymus DNA in water–N,N dimethyl formamide (DMF) solutions are presented. DMF content varied between 0 and 60% (v/v) and DNA molecular weight varied between 15 × 10⁶ and 0.5 × 10⁶. Complementary measurements of the solubility of adenine, thymine, guanine, and cytosine in H₂O–DMF mixtures are presented. The denaturation temperature of DNA, manifested by about a 35% increase of optical density, is gradually depressed by increasing DMF content. However, a significant increase of OD occurs even before (and even after) the denaturation point, when DMF content is increased isothermally. The intrinsic viscosity also exhibits a large decrease when DMF content is increased both before and after the denaturation point. Light scattering data for high-molecular-weight DNA in the predenaturation range indicate a decrease of the mean-square radius and a constant molecular weight on increasing DMF content. The results, interpreted in terms of the wormlike chain of Kratky and Porod, indicate a large decrease of the persistence length of DNA. For low-molecular-weight DNA, radius and molecular weight increase with DMF content, indicating intermolecular aggregation. The formation of compact structures of native DNA is discussed in terms of an increased solubility of uncharged bases, and a decreased solubility of phosphate and deoxyribose groups, when a less polar environment is provided by the addition of DMF.     

Phase equilibria of rodlike molecules in binary solvent systems

Phase relationships in solutions of rodlike, molecules were investigated with solutions of poly(γ-benzyl L -glutamate) having degrees of polymerization of 1500 and 3600, in N,N′-dimethylformamide–methanol and in N,N′-dimethylformamide–water at 30°C. With these systems, corresponding boundary curves for isotropic and anisotropic solution were obtained as a function of composition. Phase diagrams for these ternary systems were analysed on the basis of a theoretical treatment by Flory for a binary system consisting of a rodlike polymer and a solvent and found to be in good agreement with that predicted theoretically. For example, the polymer concentration above which the isotropic phase cannot exist and that of anisotropic conjugate phase agree with the values calculated. Furthermore, viscosities were measured as a function of polymer concentration by the falling-sphere method to confirm the boundary composition between the isotropic solution and heterogeneous region. These results were also found to coincide with those on phase equilibrium.     

The interaction of poly(N5-(3-hydroxypropyl)-L-glutamine) with solvent components in water/dioxane mixtures.

The preferential binding of solvent components with a nonionic homopolypeptide, poly(N⁵-(3-hydroxypropyl)-L -glutamine), ([Gln((CH₂)₃OH)]_n), has been determined in water/dioxane mixtures using differential refractometry. The degree of preferential binding was calculated from the difference between the refractive index increments of [Gln((CH₂)₃OH)]_n obtained from experiments carried out under two conditions: experiments where the molality of dioxane was kept identical in both compartments of the differential cell, and experiments where the chemical potential was kept identical. The polypeptide was preferentially hydrated between 10 and 70 wt % of dioxane; the amount of preferential hydration per gram of the mixed solvent increases monotonically (with a plateau region between 40 and 60 wt %) with the dioxane concentration. A monotonic increase was also observed in the degree of helicity of the polypeptide. The absolute amounts of water and dioxane bound by [Gln((CH₂)₃OH)]_n were investigated in the frozen state by the method of nuclear magnetic resonance. Hydration was measured using a mixed solvent, water/dioxane-d₈; dioxane solvation was measured using a mixed solvent, dioxane/D₂O. The polypeptide binds about 0.35 g of water per g of the polymer in aqueous solution, and hydration decreases gradually with an increase in dioxane concentration. On the other hand, the amount of dioxane solvation increases to 0.04 g per g of the polymer in the dioxane concentration range between 0 and 20 wt %, and then levels off. The rapid increase in solvation is observed before the conformational transition from random coil to α-helix occurs in [Gln((CH₂)₃OH)]_n. The dependence of the preferential and absolute binding of solvent components to [Gln((CH₂)₃OH)]_n on dioxane concentration and the conformational change in the homopolypeptide suggest that addition of dioxane to aqueous solutions induces lowering of water activity and that the helical structure of the polypeptide is enhanced by the formation of intrachain hydrogen bonds. The validity of the frozen method is also discussed.     

The infuence of interchain compositional heterogeneity on the conformation in random copolymers of γ-benzyl-L-glutamate and L-valine

Variation in the solvent used for the copolymerization of γ-benzyl-L -glutamate and L -valine N-carboxyanhydrides provides copolymers which have variable interchain compositions, and this variation in interchain compositional heterogeneity is reflected in the solid-state conformations of the respective copolymers. Poly[Glu(OBzl)²⁹Val⁷¹] prepared in dioxane exhibits a β-structure, whereas a copolymer of the same average composition prepared in benzene/methylene chloride shows predominantly an β-helix conformation with a small amount of β-structure. The use of the monomer reactivity ratio permits the calculation of the average and incremental copolymer compositions at any conversion; thus, correlations between conformation and interchain compositional heterogeneity can be made. In general, copolymers prepared in dioxane show a greater distribution of chain composition and therefore permit a wider variety of conformation than copolymers prepared in benzene/methylene chloride under identical conditions.     

Optimization of the Water-Insoluble Procedures for <Emphasis Type="Italic">USP</Emphasis> General Chapter <Emphasis Type="Italic">Residual Solvents</Emphasis> <467>

The water-insoluble procedures in US Pharmacopeia (USP) General Chapter Residual Solvents <467>, which are based on European Pharmacopoeia procedures, were optimized and modified before their inclusion in the chapter to improve their scope, performance, and ruggedness. The optimized procedures use a static headspace introduction system with a gas chromatograph equipped with a flame ionization detector. This article describes some of the key changes made to the USP published procedures, including use of dimethyl sulfoxide (DMSO) or dimethylformamide (DMF) as the solvent, addition of 5 mL of water and 1 mL of sample (dissolved in DMSO or DMF) to the headspace vial, use of a 3:1 GC split ratio, and use of new matrix-matched system suitability solutions. These procedures were verified with two different active pharmaceutical ingredients—hydroxyzine pamoate and prednisone. In the investigation, the more polar material (hydroxyzine pamoate) showed greater recoveries for the optimized procedures when prepared in DMSO. The less polar material (prednisone) typically had greater recoveries in DMF for the optimized procedures. During experimentation, insights into sample preparation, additional types of headspace instrumentation, solvent purity, and other parameters were also gained.     

Investigation of the effect of amylose/iodine complexation on the conformation of amylose in aqueous solution

Using a potato amylose fraction of 8 × 10⁵, molecular-weight viscosity studies were carried out at 25°C on solutions containing 0.176–0.042% polymer, 8.67 mM KI, 1% ethanol, and different concentrations of iodine. By a novel extrapolation method, the intrinsic viscosities of the amylose/iodine complex were determined under various conditions of iodine binding (0–0.133 g I₂/g amylose). Contrary to the view long held in this research area, it was found that the intrinsic viscosity of amylose solutions decreases significantly upon complex formation with iodine. Taking into account the results of our previous kinetic studies, the present findings are interpreted in terms of an amylose model characterized by loose, extended helical regions which are interrupted by short disordered regions. It is proposed that the intrinsic viscosity decrease observed is due to a shortening of the linear dimension of the polymer chain. This conformation change is apparently caused by the contraction of loose helical regions of the amylose macromolecule due to the entrapment of iodine (and perhaps other) atoms inside the helical cavities.     

Characterization of molecularly imprinted polymers using a new polar solvent titration method

A new method of characterizing molecularly imprinted polymers (MIPs) was developed and tested, which provides a more accurate means of identifying and measuring the molecular imprinting effect. In the new polar solvent titration method, a series of imprinted and non‐imprinted polymers were prepared in solutions containing increasing concentrations of a polar solvent. The polar solvent additives systematically disrupted the templation and monomer aggregation processes in the prepolymerization solutions, and the extent of disruption was captured by the polymerization process. The changes in binding capacity within each series of polymers were measured, providing a quantitative assessment of the templation and monomer aggregation processes in the imprinted and non‐imprinted polymers. The new method was tested using three different diphenyl phosphate imprinted polymers made using three different urea functional monomers. Each monomer had varying efficiencies of templation and monomer aggregation. The new MIP characterization method was found to have several advantages. To independently verify the new characterization method, the MIPs were also characterized using traditional binding isotherm analyses. The two methods appeared to give consistent conclusions. First, the polar solvent titration method is less susceptible to false positives in identifying the imprinting effect. Second, the method is able to differentiate and quantify changes in binding capacity, as measured at a fixed guest and polymer concentration, arising from templation or monomer aggregation processes in the prepolymerization solution. Third, the method was also easy to carry out, taking advantage of the ease of preparing MIPs. Copyright © 2014 John Wiley & Sons, Ltd.     

Helix–coil transition in copolypeptides. II. Poly(γ-benzyl L-glutamate-co-ε-carbobenzoxy-L-lysine)

The thermal helix–coil transition of poly(γ-benzyl L -glutamate-co-ε-carbobenzoxy-L -lysine) copolypeptides was studied in solvent mixtures of different compositions. The cooperativity parameter v changes linearly with polymer (and solvent) composition, whereas the heat of the transition shows a very pronounced minimum as a function of polymer composition. This minimum cannot be due only or mainly to the solvent changes and must be attributed to the effect on the transition of the side chains of the polypeptides.     

Cryochemistry: freezing effect on peptide coupling in different organic solutions

The freezing effect on peptide coupling in organic solutions of different polarity has been investigated and compared with the results obtained in liquid phase. The model reaction of DCC-activated coupling of Boc-Ala-Phe-OH with H-Ala-OBu^t has been carried out in dioxane, dimethylsulfoxide and formamide, as well as in mixtures (90%/10%, v/v) of dioxane with acetonitrile, dimethylformamide, dimethylsulfoxide and formamide. The reactions have been traced and evaluated by RP-HPLC analysis. Freezing the reaction mixture resulted in all cases in a significant suppression of the N-dipeptidylurea side-product formation together with a slight decrease of tripeptide epimerization. The coupling yields and the side effects depended on the solvent, with the dioxane and dioxane/acetonitrile mixture produced the best results. The role of freezing and solvent in the improved results is discussed. © 1998 European Peptide Society and John Wiley & Sons, Ltd.     

Electric and hydrodynamic properties of polypeptides in solution. II. Conformation of poly(L-glutamic acid) in various organic solvents

The electric birefringence of poly(L -glutamic acid) (PLGA) in methanol, dimethyl sulfoxide, dimethylformamide, N-methylacetamide, trifluoroacetic acid, dioxane–water mixtures (3:1 and 4:1 by volume), and dioxane–formamide mixture (1:1 by volume) has been measured by the use of the rectangular pulse technique at 30 °C. The intrinsic viscosity has also been measured at the same temperature. The magnitude of the specific Kerr constant and the intrinsic viscosity suggests that PLGA is helical and has a large dipole moment in methanol, dimethyl sulfoxide, dimelhylformamide, N-methylacetamide, and dioxane–water mixtures. In this case we have obtained the length distribution curve and the mean length of PLGA molecules from the decay of the electric birefringence, by applying the method recently developed for helical polypeptides. Furthermore, we have proposed and applied a method of obtaining the mean dipole moment and the optical anisotropy factor from the field strength dependence of the electric birefringence for polydisperse systems on the basis of the knowledge on the length distribution. The results show that PLGA may have a different helical conformation in dimethyl sulfoxide. The specific Kerr constant of PLGA in trifluoroacetic acid is very small, which suggests that PLGA is a random coil in this solvent.     

Angular dependence of scattered light, rotary frictional coefficients, and distribution of sizes of associated oligomers in solutions of bovine liver glutamate dehydrogenase

The angular dependence of scattering in solutions of bovine liver glutamate dehydrogenase was studied in 0.2M Na-phosphate buffer, pH 7, 10^?4M EDTA, and in buffered solutions saturated with either toluene or benzene. Whereas the shape of the scattering curves is in qualitative accord with the previously reported polymerization to rodlike linear structures, quantitative agreement between the calculated and experimental curves is poor when the polydispersity consistent with the association mechanism (derived from molecular weight determinations by light scattering and equilibrium sedimentation) is properly taken into account. The measurement of rotary frictional coefficients of macroscopic models of linearly associated glutamate dehydrogenase oligomers allowed the calculation of intrinsic viscosities of enzyme solutions but did not permit discrimination, by hydrodynamic means, between systems with different distributions of length.     

Fabrication of highly porous scaffolds for tissue engineering based on star-shaped functional poly(ε-caprolactone)

The potential of novel functional star‐shaped poly(ε‐caprolactone)s of controlled molecular weight and low molecular weight distribution bearing acrylate end groups as material for biomedical applications was demonstrated in this study. The polymers were functionalized via Michael‐type addition of amino acid esters containing amino or thiol groups showing the potential for immobilization of biomolecules. Furthermore, scaffolds of different geometries were prepared by uniaxial freezing of polymer solutions followed by freeze drying. Different solvents and polymer concentrations were investigated, resulting in scaffolds with porosities between 76 and 96%. Mechanical properties of the scaffolds were investigated and the morphology was determined via scanning electron microscopy. Scaffolds with interconnected channels were prepared using benzene, 1,2‐dichloroethane or dioxane as solvent. The tubular longitudinal pores in honeycomb arrangement extend throughout the full extent of the scaffolds (typical pore sizes: 20–100 µm). Biotechnol. Bioeng. 2011; 108:694–703. © 2010 Wiley Periodicals, Inc.     

Microcalorimetric studies of solvent-induced conformational change of sodium and cesium salts of poly(L-glutamic acid) in aqueous media

Organic solvent-induced coil → helix conformational change of poly(sodium) L -glutamate (NaPLG) and poly(cesium L -glutamate) (CsPLG) in solution in aqueous mixed solvents have been studied at 25°C. Heats of dilution of NaPLG in the water–dioxane pair have been measured as a function of polymer concentration and solvent composition. The results indicate that the overall chain conformation in the disordered form is not too different from that in the α-helical form. Heat capacity measurements by flow microcalorimetry have also been done. The apparent monomolar heat capacity at constant pressure of the polymer, C_{p, ?}, decreases with dilution similarly to other strong polyelectrolytes in aqueous media. In the water–dioxane pair, C_{p, ?} increases with the dioxane content due to partial desolvation of ionic species resulting from increasing ionic association. In the case of the water-2-chloroethanol (CE) pair, the transition takes place at low CE content and results show a fast decrease in C_{p, ?} when the α-helical conformation predominates. It is believed carboxylate groups and CE molecules associate themselves into a complex formation responsible for the transition. The size of the cation plays a significant role in the thermodynamic properties of these polyelectrolytes in solution since sodium ions are more strongly bound to the chain than cesium ions.     

A combined spectroscopic and TDDFT investigation of the solute‐solvent interactions of two coumarin derivatives

The UV/Vis absorption and fluorescence characteristics of 3‐cyano‐7‐hydroxycoumarin [ CHC ] and 7‐amino‐4‐methyl‐3‐coumarinylacetic acid [ AMCA‐H ] were studied at room temperature in several neat solvents and binary solvent mixtures of 1,4‐dioxane/acetonitrile. The effects of solvent on the spectral properties are analyzed using single and multi‐parameter solvent polarity scales. Both general solute/solvent interactions and hydrogen bond interactions are operative in these systems. The solvation of CHC and AMCA‐H dyes in 1,4‐dioxane/acetonitrile solvent mixtures has been studied. The solutes CHC and AMCA‐H are preferentially solvated by acetonitrile and a synergistic effect is observed for both molecules in dioxane/acetonitrile solvent mixtures. In addition, using the solvatochromic method the ground‐ and the excited‐state dipole moments of both the dyes were calculated. The ground‐ and excited‐state dipole moments, absorption and emission maxima and HOMO–LUMO gap were also estimated theoretically using B3LYP/6–311+ G (d,p) level of theory in the gaseous phase, dioxane and acetonitrile solvents. Furthermore, changes in dipole moment values were also calculated using the variation of Stokes shift with the molecular–microscopic empirical solvent polarity parameter ( ). The observed excited‐state dipole moments are larger than their ground‐state counterparts, indicating a substantial redistribution of the electron densities in a more dipolar excited state for both coumarins investigated.     

Solvation study of the non-specific lipid transfer protein from wheat by intermolecular NOEs with water and small organic molecules

Intermolecular nuclear Overhauser effects (NOEs) were measured between the protons of various small solvent or gas molecules and the non-specific lipid transfer protein (ns-LTP) from wheat. Intermolecular NOEs were observed with the hydrophobic pocket in the interior of wheat ns-LTP, which grew in intensity in the order cyclopropane (saturated solution) < methane (140 bar) < ethane (40 bar) < acetonitrile (5% in water) < cyclohexane (saturated solution) < benzene (saturated solution). No intermolecular NOEs were observed with dioxane (5% in water). The intermolecular NOEs were negative for all of the organic molecules tested. Intermolecular NOEs between wheat ns-LTP and water were weak or could not be distinguished from exchange-relayed NOEs. As illustrated by the NOEs with cyclohexane versus dioxane, the hydrophobic pocket in wheat ns-LTP preferably binds non-polar molecules. Yet, polar molecules like acetonitrile can also be accommodated. The pressure dependence of the NOEs between methane and wheat ns-LTP indicated incomplete occupancy, even at 190 bar methane pressure. In general, NOE intensities increased with the size of the ligand molecule and its vapor pressure. NMR of the vapor phase showed excellent resolution between the signals from the gas phase and those from the liquid phase. The vapor concentration of cyclohexane was fivefold higher than that of the dioxane solution, supporting the binding of cyclohexane versus uptake of dioxane.     

Structure of aggregates and helix-coil transition of polypeptides by dielectric measurements. I. Poly-gamma-benzyl-L-glutamate in dioxane and dioxane-dichloroacetic acid

Dielectric dispersion measurements on poly-γ-benzyl-L -glutamate (PBLG) in dioxane and dioxane–dichloroacetic acid (DCA) mixtures in the frequency range 200 Hz–2 MHz were made in order to study the structure of molecular aggregates. The structure of aggregates is explained on the basis of the variation of dipole moment and relaxation time with degree of aggregation. PBLG was found to form linear head-to-tail-type aggregates in dioxane. These aggregates gradually reduce in size without loosing their α-helical structure during the process of disaggregation obtained by either adding DCA to the solution in dioxane or by heating. It was confirmed that the addition of 30 wt % DCA completely destroys the aggregation of PBLG in dioxane at 30°C. Thermal disaggregation, however, was not complete even at a temperature approaching the boiling point of the solvent. A reaction scheme for aggregation is proposed and equilibrium constants are calculated at various stages of aggregation. The enthalpy of aggregate formation is found to be ?3 kcal/mol. Results of optical rotatory dispersion measurements of the helix–coil transition in this system are also presented.     

Effects of solvent on inclusion complexation of a chiral dipeptide toward racemic BINOL

The effects of reaction solvent on inclusion complexation of a chiral dipeptide (3S,6S)‐ 1 derived from (S)‐proline toward racemic BINOL was investigated, discovering that the reaction solvent played a crucial role in determining the inclusion complexation behavior of dipeptide (3S,6S)‐ 1 toward rac‐BINOL. (3S,6S)‐ 1 did not show any chiroselective or achiroselective complexation toward rac‐BINOL in polar protic solvents such as methanol and ethanol, polar aprotic solvents including trichloromethane and THF, while in polar aprotic solvent ethyl acetate and apolar aprotic solvents benzene, (3S,6S)‐ 1 displayed achiroselective complexation toward rac‐BINOL. However, the resulting heterocomplex HC‐ 2 from benzene and HC‐ 3 from ethyl acetate have a different composition. Single crystal X‐ray diffraction analysis demonstrates that the two heterocomplexes are formed via different H‐bond interaction patterns, in which the reaction solvent has a dramatic effect. Furthermore, this work provides a relatively green method for quantitative enantiomeric enrichment of nonracemic BINOL, in which unacceptable and toxic benzene was replaced by ethyl acetate.     

Molecular beams of macroions. 3. Zein and polyvinylpyrrolidone

A 95% ethanol solution of the prolamin zein and of the synthetic polymer polyvinyl-pyrrolidone (PVP) can be successfully electrosprayed and a molecular beam, containing ions of these substances in nitrogen carrier gas, formed. Similarly to polystyrene in benzene–acetone solvent, negative beams of zein and PVP have more substructure than beams containing positive ions. The results indicate considerable aggregation in the beam, possibly of six molecular units per aggregate, in addition to the singly charged single molecules.     

Solvation study of the non-specific lipid transfer protein from wheat by intermolecular NOEs with water and small organic molecules

Intermolecular nuclear Overhauser effects (NOEs) were measured between the protons of various small solvent or gas molecules and the non-specific lipid transfer protein (ns-LTP) from wheat. Intermolecular NOEs were observed with the hydrophobic pocket in the interior of wheat ns-LTP, which grew in intensity in the order cyclopropane (saturated solution) < methane (140 bar) < ethane (40 bar) < acetonitrile (5% in water) < cyclohexane (saturated solution) < benzene (saturated solution). No intermolecular NOEs were observed with dioxane (5% in water). The intermolecular NOEs were negative for all of the organic molecules tested. Intermolecular NOEs between wheat ns-LTP and water were weak or could not be distinguished from exchange-relayed NOEs. As illustrated by the NOEs with cyclohexane versus dioxane, the hydrophobic pocket in wheat ns-LTP preferably binds non-polar molecules. Yet, polar molecules like acetonitrile can also be accommodated. The pressure dependence of the NOEs between methane and wheat ns-LTP indicated incomplete occupancy, even at 190 bar methane pressure. In general, NOE intensities increased with the size of the ligand molecule and its vapor pressure. NMR of the vapor phase showed excellent resolution between the signals from the gas phase and those from the liquid phase. The vapor concentration of cyclohexane was fivefold higher than that of the dioxane solution, supporting the binding of cyclohexane versus uptake of dioxane.