Postresonance electromagnetic absorption by man and animals

A surface integral equation (SIE) method is used to calculate the specific absorption rate (SAR) in spherically capped cylindrical models irradiated by an axially incident electromagnetic plane wave (K polarization) in a frequency range for which calculations previously have not been available (80–400 MHz for man models). In the SIE method, the electromagnetic (EM) field relations are formulated in terms of electric and magnetic currents on the surface of the model. The average SAR is calculated from the far scattered EM fields by means of the forward scattering theorem. SAR data calculated by the SIE method agree with data calculated by the extended boundary condition method (EBCM) for frequencies up to 80 MHz (the upper frequency limit of the EBCM) for man models. For rat models exposed to 1–3 GHz radiation, reasonable agreement was also obtained with the limited experimental data available.     

头部组织三维核磁共振电阻抗成像算法的仿真研究

文章给出了一种基于核磁共振技术的三维阻抗成像（电导率分布）重构算法,并将该方法应用于人体头部组织电导率分布重构上。该代数重构方法是利用高分辨率的核磁共振成像系统对成像物体进行三维构建和不同组织的边界区分,根据核磁共振系统中测量得到的磁感应强度Bx和By分量并结合有限元数值计算得到的电流密度分布J组成非线性矩阵,通过迭代求解此非线性矩阵,来解决三维电导率分布的重构问题。在三层球头模型（包括头皮、颅骨和大脑）上分别进行的仿真实验结果表明,该算法具有较强的抗噪声能力和较好的收敛性,重构的头部电导率分布图像具有较高的精确性。     

Magnetic field influence on electrical properties of human blood measured by impedance spectroscopy

The impedance spectroscopy technique (IST) was used for studying the effect of a 0.5 T magnetic field on the electrical properties of whole human blood. A Solartron SI 1260 spectrometer was used to measure the impedance spectra of magnetic field exposed blood samples compared to non-exposed samples. An equivalent electrical circuit model, consisting in a resistance Rs in series with a parallel circuit formed by a constant phase element (CPE) and another resistance Rp, is proposed to fit the data in both cases. The experiment used 3 ml human blood samples from 160 healthy donors. A Wilcoxon matched pairs statistical test was applied to the data. The data analysis seems to show a statistically significant increase of the values of resistance Rp (Z = 5.06, P < 0.001) and capacitance CT (Z = 3.32, P < 0.001) of the blood exposed to magnetic field, by approximately 10.4% and 1.9%, respectively.     

Magnetic fluid hyperthermia simulations in evaluation of SAR calculation methods

PurposeThe purpose of this study is to employ magnetic fluid hyperthermia simulations in the precise computation of Specific Absorption Rate functions -SAR(T)-, and in the evaluation of the predictive capacity of different SAR calculation methods.MethodsMagnetic fluid hyperthermia experiments were carried out using magnetite-based nanofluids. The respective SAR values were estimated through four different calculation methods including the initial slope method, the Box-Lucas method, the corrected slope method and the incremental analysis method (INCAM). A novel numerical model combining the heat transfer equations and the Navier-Stokes equations was developed to reproduce the experimental heating process. To address variations in heating efficiency with temperature, the expression of the power dissipation as a Gaussian function of temperature was introduced and the Levenberg-Marquardt optimization algorithm was employed to compute the function parameters and determine the function’s effective branch within each measurement’s temperature range. The power dissipation function was then reduced to the respective SAR function.ResultsThe INCAM exhibited the lowest relative errors ranging between 0.62 and 15.03% with respect to the simulations. SAR(T) functions exhibited significant variations, up to 45%, within the MFH-relevant temperature range.ConclusionsThe examined calculation methods are not suitable to accurately quantify the heating efficiency of a magnetic fluid. Numerical models can be exploited to effectively compute SAR(T) and contribute to the development of robust hyperthermia treatment planning applications.     

Empirical and theoretical dosimetry in support of whole body resonant RF exposure (100 MHz) in human volunteers

This study reports the dosimetry performed to support an experiment that measured physiological responses of volunteer human subjects exposed to the resonant frequency for a seated human adult at 100 MHz. Exposures were performed in an anechoic chamber which was designed to provide uniform fields for frequencies of 100 MHz or greater. A half wave dipole with a 90 degrees reflector was used to optimize the field at the subject location. The dosimetry plan required measurement of transmitter harmonics, stationary probe drift, field strengths as a function of distance, electric and magnetic field maps at 200, 225, and 250 cm from the dipole antenna, and specific absorption rate (SAR) measurements using a human phantom, as well as theoretical predictions of SAR with the finite difference time domain (FDTD) method. On each exposure test day, a measurement was taken at 225 cm on the beam centerline with a NBS E field probe to assure consistently precise exposures. A NBS 10 cm loop antenna was positioned 150 cm to the right, 100 cm above, and 60 cm behind the subject and was read at 5 min intervals during all RF exposures. These dosimetry measurements assured accurate and consistent exposures. FDTD calculations were used to determine SAR distribution in a seated human subject. This study reports the necessary dosimetry for work on physiological consequences of human volunteer exposures to 100 MHz.     

Development of a rat head exposure system for simulating human exposure to RF fields from handheld wireless telephones

The aim of this project was to develop an animal exposure system for the biological effect studies of radio frequency fields from handheld wireless telephones, with energy deposition in animal brains comparable to those in humans. The finite‐difference time‐domain (FDTD) method was initially used to compute specific absorption rate (SAR) in an ellipsoidal rat model exposed with various size loop antennas at different distances from the model. A 3 × 1 cm rectangular loop produced acceptable SAR patterns. A numerical rat model based on CT images was developed by curve‐fitting Hounsfield Units of CT image pixels to tissue dielectric properties and densities. To design a loop for operating at high power levels, energy coupling and impedance matching were optimized using capacitively coupled feed lines embedded in a Teflon rod. Sprague Dawley rats were exposed with the 3 × 1 cm loop antennas, tuned to 837 or 1957 MHz for thermographically determined SAR distributions. Point SARs in brains of restrained rats were also determined thermometrically using fiberoptic probes. Calculated and measured SAR patterns and results from the various exposure configurations are in general agreement. The FDTD computed average brain SAR and ratio of head to whole body absorption were 23.8 W/kg/W and 62% at 837 MHz, and 22.6 W/kg/W and 89% at 1957 MHz. The average brain to whole body SAR ratio was 20 to 1 for both frequencies. At 837 MHz, the maximum measured SAR in the restrained rat brains was 51 W/kg/W in the cerebellum and 40 W/kg/W at the top of the cerebrum. An exposure system operating at 837 MHz is ready for in vivo biological effect studies of radio frequency fields from portable cellular telephones. Two‐tenths of a watt input power to the loop antenna will produce 10 W/kg maximum SAR, and an estimated 4.8 W/kg average brain SAR in a 300 g medium size rat. Bioelectromagnetics 20:75–92, 1999. © 1999 Wiley‐Liss, Inc.     

Identification and characterization of scaffold-associated region (SAR) of rRNA gene of silkwormAttacus ricini

identify the specific nuclear scaffold-bound DNA sequence in rRNA gene clusters of silkwormAttacus ricini, the detergent-like salt lithium 3′, 5′ diiodosalicylate (LIS) was used for the preparation of nuclear scaffold. Through Southern hybridization, using different DNA stretches of rRNA gene as the probe, a scaffold-associated region (SAR) in the 5-non transcribed spacer (NTS) of rRNA gene has been identified. Exonuclease III digestion was used to narrow down the sequence of matrix attachment fragment. It was defined as a specific attachment site within the SacII-EcoRI fragment. It is about 1 kb in length and AT-rich (> 70%). Computer analysis of the SAR sequencing data showed that there are topoisomerase II cleavage sites, ATATTT box, and yeast autonomously replication sequence (ARS). The d(AT)₁₈ specific DNA sequence of the SAR, which was determined previously, was an S1 nuclease hypersensitive site. It might be a cis-element of DNA-signal characteristic for SAR.     

Contribution of SAR11 bacteria to dissolved dimethylsulfoniopropionate and amino acid uptake in the North Atlantic ocean

SAR11 bacteria are abundant in marine environments, often accounting for 35% of total prokaryotes in the surface ocean, but little is known about their involvement in marine biogeochemical cycles. Previous studies reported that SAR11 bacteria are very small and potentially have few ribosomes, indicating that SAR11 bacteria could have low metabolic activities and could play a smaller role in the flux of dissolved organic matter than suggested by their abundance. To determine the ecological activity of SAR11 bacteria, we used a combination of microautoradiography and fluorescence in situ hybridization (Micro-FISH) to measure assimilation of (3)H-amino acids and [(35)S]dimethylsulfoniopropionate (DMSP) by SAR11 bacteria in the coastal North Atlantic Ocean and the Sargasso Sea. We found that SAR11 bacteria were often abundant in surface waters, accounting for 25% of all prokaryotes on average. SAR11 bacteria were typically as large as, if not larger than, other prokaryotes. Additionally, more than half of SAR11 bacteria assimilated dissolved amino acids and DMSP, whereas about 40% of other prokaryotes assimilated these compounds. Due to their high abundance and activity, SAR11 bacteria were responsible for about 50% of amino acid assimilation and 30% of DMSP assimilation in surface waters. The contribution of SAR11 bacteria to amino acid assimilation was greater than would be expected based on their overall abundance, implying that SAR11 bacteria outcompete other prokaryotes for these labile compounds. These data suggest that SAR11 bacteria are highly active and play a significant role in C, N, and S cycling in the ocean.     

Empirical and theoretical dosimetry in support of whole body radio frequency (RF) exposure in seated human volunteers at 220 MHz

This study reports the dosimetry performed to support an experiment that measured physiological responses of seated volunteer human subjects exposed to 220 MHz fields. Exposures were performed in an anechoic chamber which was designed to provide uniform fields for frequencies of 100 MHz or greater. A vertical half-wave dipole with a 90 degrees reflector was used to optimize the field at the subject's location. The vertically polarized E field was incident on the dorsal side of the phantoms and human volunteers. The dosimetry plan required measurement of stationary probe drift, field strengths as a function of distance, electric and magnetic field maps at 200, 225, and 250 cm from the dipole antenna, and specific absorption rate (SAR) measurements using a human phantom, as well as theoretical predictions of SAR with the finite difference time domain (FDTD) method. A NBS (National Bureau of Standards, now NIST, National Institute of Standards and Technology, Boulder, CO) 10 cm loop antenna was positioned 150 cm to the right, 100 cm above and 60 cm behind the subject (toward the transmitting antenna) and was read prior to each subject's exposure and at 5 min intervals during all RF exposures. Transmitter stability was determined by measuring plate voltage, plate current, screen voltage and grid voltage for the driver and final amplifiers before and at 5 min intervals throughout the RF exposures. These dosimetry measurements assured accurate and consistent exposures. FDTD calculations were used to determine SAR distribution in a seated human subject. This study reports the necessary dosimetry to precisely control exposure levels for studies of the physiological consequences of human volunteer exposures to 220 MHz.     

Detection of Escherichia coli in potable water using direct impedance technology

Direct impedance measurement utilizing a medium previously described as being specific for Escherichia coli and which contains trimethylamine N -oxide (TMAO) and glucuronic acid was used to detect E. coli in water samples. The system was compared with the Colilert® presence/absence test and the United Kingdom standard membrane nitration technique using membrane lauryl sulphate broth. The impedance method correlated well with both the traditional membrane method (93%) and the Colilert® method (93.95%) for a number of different water types. No interference from Citrobacter spp. (as reported in previous studies) was detected in this study although some Salmonella spp. did give false-positive results. The data presented here suggest that the use of direct impedance may offer an alternative to conventional methods for the detection of E. coli in water.     

Contribution of SAR11 Bacteria to Dissolved Dimethylsulfoniopropionate and Amino Acid Uptake in the North Atlantic Ocean

SAR11 bacteria are abundant in marine environments, often accounting for 35% of total prokaryotes in the surface ocean, but little is known about their involvement in marine biogeochemical cycles. Previous studies reported that SAR11 bacteria are very small and potentially have few ribosomes, indicating that SAR11 bacteria could have low metabolic activities and could play a smaller role in the flux of dissolved organic matter than suggested by their abundance. To determine the ecological activity of SAR11 bacteria, we used a combination of microautoradiography and fluorescence in situ hybridization (Micro-FISH) to measure assimilation of ³H-amino acids and [³⁵S]dimethylsulfoniopropionate (DMSP) by SAR11 bacteria in the coastal North Atlantic Ocean and the Sargasso Sea. We found that SAR11 bacteria were often abundant in surface waters, accounting for 25% of all prokaryotes on average. SAR11 bacteria were typically as large as, if not larger than, other prokaryotes. Additionally, more than half of SAR11 bacteria assimilated dissolved amino acids and DMSP, whereas about 40% of other prokaryotes assimilated these compounds. Due to their high abundance and activity, SAR11 bacteria were responsible for about 50% of amino acid assimilation and 30% of DMSP assimilation in surface waters. The contribution of SAR11 bacteria to amino acid assimilation was greater than would be expected based on their overall abundance, implying that SAR11 bacteria outcompete other prokaryotes for these labile compounds. These data suggest that SAR11 bacteria are highly active and play a significant role in C, N, and S cycling in the ocean.     

Metallic electrodes and leads in simultaneous EEG-MRI: specific absorption rate (SAR) simulation studies

The purpose of this study was to investigate the changes in specific absorption rate (SAR) in human-head tissues while using nonmagnetic metallic electroencephalography (EEG) electrodes and leads during magnetic resonance imaging (MRI). A realistic, high resolution (1 mm(3)) head model from individual MRI data was adopted to describe accurately thin tissues, such as bone marrow and skin. The RF power dissipated in the human head was evaluated using the FDTD algorithm. Both surface and bird cage coils were used. The following numbers of EEG electrodes/leads were considered: 16, 31, 62, and 124. Simulations were performed at 128 and 300 MHz. The difference in SAR between the electrodes/leads and no-electrodes conditions was greater with the bird cage coil than with the surface coil. The peak 1 g averaged SAR values were highest at 124 electrodes, increasing to as much as two orders of magnitude (x172.3) at 300 MHz compared to the original value. At 300 MHz, there was a fourfold (x3.6) increase of SAR averaged over the bone marrow, and a sevenfold (x7.4) increase in the skin. At 128 MHz, there was a fivefold (x5.6) increase of whole head SAR. Head models were obtained from two different subjects, with an inter-subject whole head SAR variability of 3%. .     

A system for parallel measurement of glottis opening and larynx position

The simultaneous assessment of glottal dynamics and larynx position can be beneficial for the diagnosis of disordered voice or speech production and swallowing. Up to now, methods either concentrate on assessment of the glottis opening using optical, acoustical or electrical (electroglottography, EGG) methods, or on visualisation of the larynx position using ultrasound, computer tomography or magnetic resonance imaging techniques.The method presented here makes use of a time-multiplex measurement approach of space-resolved transfer impedances through the larynx. The fast sequence of measurements allows a quasi simultaneous assessment of both larynx position and EGG signal using up to 32 transmit–receive signal paths. The system assesses the dynamic opening status of the glottis as well as the vertical and back/forward motion of the larynx.Two electrode-arrays are used for the measurement of the electrical transfer impedance through the neck in different directions. From the acquired data the global and individual conductivity is calculated as well as a 2D point spatial representation of the minimum impedance.The position information is shown together with classical EGG signals allowing a synchronous visual assessment of glottal area and larynx position. A first application to singing voice analysis is presented that indicate a high potential of the method for use as a non-invasive tool in the diagnosis of voice, speech, and swallowing disorders.     

Interdigitated array microelectrode based impedance biosensor coupled with magnetic nanoparticle-antibody conjugates for detection of Escherichia coli O157:H7 in food samples

An impedance biosensor based on interdigitated array microelectrode (IDAM) coupled with magnetic nanoparticle-antibody conjugates (MNAC) was developed and evaluated for rapid and specific detection of E. coli O157:H7 in ground beef samples. MNAC were prepared by immobilizing biotin-labeled polyclonal goat anti-E. coli antibodies onto streptavidin-coated magnetic nanoparticles, which were used to separate and concentrate E. coli O157:H7 from ground beef samples. Magnitude of impedance and phase angle were measured in a frequency range of 10 Hz to 1 MHz in the presence of 0.1M mannitol solution. The lowest detection limits of this biosensor for detection of E. coli O157:H7 in pure culture and ground beef samples were 7.4 x 10(4) and 8.0 x 10(5)CFU ml(-1), respectively. The regression equation for the normalized impedance change (NIC) versus E. coli O157:H7 concentration (N) in ground beef samples was NIC=15.55 N-71.04 with R(2)=0.95. Sensitivity of the impedance biosensor was improved by 35% by concentrating bacterial cells attached to MNAC in the active layer of IDAM above the surface of electrodes with the help of a magnetic field. Based on equivalent circuit analysis, it was observed that bulk resistance and double layer capacitance were responsible for the impedance change caused by the presence of E. coli O157:H7 on the surface of IDAM. Surface immobilization techniques, redox probes, or sample incubation were not used in this impedance biosensor. The total detection time from sampling to measurement was 35 min.     

Identification and characterization of scaffold-associated region (SAR) of rRNA gene of silkworm Attacus ricini

identify the specific nuclear scaffold-bound DNA sequence in rRNA gene clusters of silkwormAttacus ricini, the detergent-like salt lithium 3′, 5′ diiodosalicylate (LIS) was used for the preparation of nuclear scaffold. Through Southern hybridization, using different DNA stretches of rRNA gene as the probe, a scaffold-associated region (SAR) in the 5-non transcribed spacer (NTS) of rRNA gene has been identified. Exonuclease III digestion was used to narrow down the sequence of matrix attachment fragment. It was defined as a specific attachment site within the SacII-EcoRI fragment. It is about 1 kb in length and AT-rich (> 70%). Computer analysis of the SAR sequencing data showed that there are topoisomerase II cleavage sites, ATATTT box, and yeast autonomously replication sequence (ARS). The d(AT)₁₈ specific DNA sequence of the SAR, which was determined previously, was an S1 nuclease hypersensitive site. It might be a cis-element of DNA-signal characteristic for SAR. Project supported by the National Natural Science Foundation of China (Grant No. 39570398).     

Currents induced in anatomic models of the human for uniform and nonuniform power frequency magnetic fields

We have used the quasi-static impedance method to calculate the currents induced in the nominal 2 x 2 x 3 and 6 mm resolution anatomically based models of the human body for exposure to magnetic fields at 60 Hz. Uniform magnetic fields of various orientations and magnitudes 1 or 0.417 mT suggested in the ACGIH and ICNIRP safety guidelines are used to calculate induced electric fields or current densities for the various glands and organs of the body including the pineal gland. The maximum 1 cm(2) area-averaged induced current densities for the central nervous system tissues, such as the brain and the spinal cord, were within the reference level of 10 mA/m(2) as suggested in the ICNIRP guidelines for magnetic fields (0.417 mT at 60 Hz). Tissue conductivities were found to play an important role and higher assumed tissue conductivities gave higher induced current densities. We have also determined the induced current density distributions for nonuniform magnetic fields associated with two commonly used electrical appliances, namely a hair dryer and a hair clipper. Because of considerably higher magnetic fields for the latter device, higher induced electric fields and current densities were calculated.     

Cardiac output of marmots by the thoracic impedance technique.

Baseline impedance (Z₀) and resistivity of blood were higher for marmots than reported for other species. The transthoracic impedance method was compared to dye dilution and electromagnetic flowmeter procedures for estimation of cardiac output of seven marmots at a range of flows from 40 to 400 ml/min. There was a low, positive, but significant correlation (r = 0.566) found in comparison to dye dilution at outputs measured by the impedance method exceeding 120 ml/min. Correlation was better (r = 0.905) in the comparison between impedance and flowmeter methods.It was concluded that transthoracic impedance provides data that are sufficiently accurate for chronic measurements of stroke volume and cardiac output of this species. The method has the additional advantage of supplying EGG and respiratory data without supplemental connections to the animal preparations.     

Effect of benzothiadiazole on the metabolome of Arabidopsis thaliana

Benzothiadiazole (BTH) is a functional analog of the plant endogenous hormone-like compound, salicylic acid (SA), which is required for the induction of plant defense genes leading to systemic acquired resistance (SAR). Previous molecular and genetic studies have suggested that BTH itself might potentiate SAR resulting in the induction of several pathogenesis-related (PR) genes. However, the changes in the metabolome, which occur as a result of BTH-treatment, remain unclear. In this study, metabolic alterations in BTH-treated Arabidopsis thaliana were investigated using nuclear magnetic resonance (NMR) spectroscopy followed by multivariate data analyses such as principal component analysis (PCA) and partial least square-discriminant analysis (PLS-DA). Both PCA and PLS-DA show that increase of glucose, glutamine, inositol, malic acid, sucrose, and threonine as well as BTH and its degraded metabolites contribute to the clear discrimination of the metabolome of BTH-treated Arabidopsis from control plants. However, the levels of phenolic metabolites, which have generally been observed to be induced by other signaling molecules were significantly reduced in BTH-treated Arabidopsis. In addition to these changes due to BTH-treatment, it was also found that the EtOH used as a solvent in this treatment may per se act as an inducer of the accumulation of a flavonoid.     

To Fit or Not to Fit? A Poorly Fitting Procedure Produces Inconsistent Results When the Species–Area Relationship is used to Locate Hotspots

Ulrich and Buszko (2005, Biodivers Conserv 14:1977–1988) have recently applied the species–area relationship (SAR) to find butterfly hotspots in Europe using the linearized power function. They found that, with this method, despite the fact that the larger southern European countries and the Asian part of Turkey belong to the group of ecological hotspots defined by Myers et al. (2000, Nature 403:853–858), the SAR was unable to separate these countries from others. However, this result was a consequence of a poor fit. When different fitting models are compared, there is no obvious reason to prefer the linearized power function model, while a curvilinear fit to the power function should be selected as a best fit for this data set. Using this fit, two large southern European countries (Italy and Greece) and the Asian part of Turkey are identified as hotspots by the SAR. This simple exercise illustrates how an inappropriate choice of the fitting equation for the SAR may lead to inconsistent results.