Optimal design features of camelized human single-domain antibody libraries

We have constructed a human V(H) library based on a camelized V(H) sequence. The library was constructed with complete randomization of 19 of the 23 CDR3 residues and was panned against two monoclonal antibody targets to generate V(H) sequences for determination of the antigen contact residue positions. Furthermore, the feasibility and desirability of introducing a disulfide bridge between CDR1 and CDR3 was investigated. Sequences derived from the library showed a bias toward the use of C-terminal CDR3 residues as antigen contact residues. Mass spectrometric analyses indicated that CDR1-CDR3 disulfide formation was universal. However, surface plasmon resonance and NMR data showed that the CDR3 constraint imposed by the disulfide bridge was not always desirable. Very high yields of soluble protein products and lack of protein aggregation, as demonstrated by the quality of the (1)H-(15)N HSQC spectra, indicated that the V(H) sequence for library construction was a good choice. These results should be useful in the design of V(H) libraries with optimal features.     

Bispecific Engineered Antibody Domains (Nanoantibodies) That Interact Noncompetitively with an HIV-1 Neutralizing Epitope and FcRn

Libraries based on an isolated human immunoglobulin G1 (IgG1) constant domain 2 (CH2) have been previously diversified by random mutagenesis. However, native isolated CH2 is not very stable and the generation of many mutations could lead to an increase in immunogenicity. Recently, we demonstrated that engineering an additional disulfide bond and removing seven N-terminal residues results in an engineered antibody domain (eAd) (m01s) with highly increased stability and enhanced binding to human neonatal Fc receptor (FcRn) (Gong et al, JBC, 2009 and 2011). We and others have also previously shown that grafting of the heavy chain complementarity region 3 (CDR-H3 (H3)) onto cognate positions of the variable domain leads to highly diversified libraries from which a number of binders to various antigens have been selected. However, grafting of H3s to non-cognate positions in constant domains results in additional residues at the junctions of H3s and the CH2 framework. Here we describe a new method based on multi-step PCR that allows the precise replacement of loop FG (no changes in its flanking sequences) by human H3s from another library. Using this method and limited mutagenesis of loops BC and DE we generated an eAd phage-displayed library. Panning of this library against an HIV-1 gp41 MPER peptide resulted in selection of a binder, m2a1, which neutralized HIV-1 isolates from different clades with modest activity and retained the m01s capability of binding to FcRn. This result provides a proof of concept that CH2-based antigen binders that also mimic to certain extent other functions of full-size antibodies (binding to FcRn) can be generated; we have previously hypothesized that such binders can be made and coined the term nanoantibodies (nAbs). Further studies in animal models and in humans will show how useful nAbs could be as therapeutics and diagnostics.     

A unique primary structure, cDNA cloning and function of a galactose-specific lectin from ascidian plasma.

The complete amino acid sequence of a galactose-specific lectin from the plasma of the ascidian Halocynthia roretzi has been determined by sequential Edman degradation analysis of peptide fragments derived by proteolytic fragmentation and chemical cleavage of the reductive S-pyridylethylated lectin. Peptide fragments were separated by reverse-phase HPLC. The N-terminal and C-terminal amino acid sequences were determined by Edman degradation and enzymatic digestion. The H. roretzi plasma lectin is a single-chain protein consisting of 327 amino acids and four disulfide bonds, one of which was found to be cross-linked intramolecularly. A comparison of the amino acid sequence of the H. roretzi plasma lectin with the sequences of other proteins reveals that the H. roretzi lectin has a structure consisting of a twice-repeated sequence, a fibrinogen-related sequence and a C-type lectin-homologous sequence. The above amino acid sequence was verified by cDNA cloning of this lectin. Three cDNA clones that have single ORFs encoding the lectin precursor were isolated from an H. roretzi hepatopancreas cDNA library. The deduced amino acid sequences in the three cDNA clones contain the same sequence of the mature lectin molecule and the same putative signal sequence. In addition, it was demonstrated that this lectin can enhance phagocytosis by H. roretzi hemocytes. Thus, the plasma lectin is constructed into an oligomer structure via intermolecular disulfide bonds and plays a role in the biological defense of H. roretzi as a defense molecule.     

Synthesis of glycolipopeptidic building blocks for carbohydrate receptor discovery

A class of glycolipopeptides for use as building blocks for a new type of dynamic combinatorial library is reported. The members of the library consist of a variable carbohydrate moiety, coded amino acids, and lipoamino acids in order to convert them into amphiphiles. Glycolipopeptidic amphiphiles interact through non-covalent bonding when mixed together in aqueous phase and form micelles in dynamic close-packed fluid mosaic arrays. The head groups of amphiphiles are exposed on the micelle surface, providing entities which could be screened in biological assays to find the most potent combination of building blocks in order to identify new bioactive carbohydrate ligands.     

Interactions between arginine-rich histones and deoxyribonucleic acids. I. Thermal denaturation.

Physical properties of histone-DNA complexes very often depend upon the method of complex formation. In an attempt to make the studies of histone-DNA interactions more relevant to biological systems, results from thermal denaturation of native chromatin were used as references for determining how closely a given histone-DNA complex approaches its native state in chromatin. In the case of arginine-rich histones H3 (III or f3) and H4 (IV or f2a1), four methods were used for making complexes with calf thymus DNA: (A) NaCl gradient dialysis with urea; (B) NaCl gradient dialysis without urea; (C) direct mixing in 2.5 x 10(-4) EDTA, pH 8.0; and (D) direct mixing in 0.01 M sodium phosphate, pH 7.0. It was observed that a complex made by direct mixing in phosphate (method D) is closer to the native than is one made by direct mixing in EDTA (method C) than the one made by gradient dialysis with urea (method A) or without urea (method B). Regardless of the method used for complex formation, no substantial differences were observed between complexes with histone H3 dimer with disulfide bond(s) and a reduced H3 without disulfide bond, implying that perhaps a dimer with or without disulfide bond is a natural fundamental subunit in our experimental conditions. When the method of direct mixing in EDTA is used, the melting properties of the complexes vary only slightly with any one of the following H3 histones: from calf thymus, H3 without disulfide bond, H3 dimer, and H3 oligomer with disulfide bonds, also, from duck erythrocyte, H3 monomer and dimer. The complexes formed between DNA and a mixture of H3 and H4 by method D have melting properties similar to those of native chromatin. Since an equimolar mixture of histone H3 and H4 in 0.01 M phosphate, pH 7.0, was shown to form a tetramer (D'Anna, J.A., and Isenberg, I. (1974), Biochem. Biophys. Res. Commun. 61, 343), our results suggest that, a tetramer of H3 and H4, likely to be (H3)2(H4)2, formed from one H3 dimer and one H4 dimer, can bind DNA in a manner similar to that in native chromatin.     

The structure of an antitumor C(H)2-domain-deleted humanized antibody

C(H)2-domain-deleted CC49 (HuCC49DeltaCH2), a recombinant humanized antibody that recognizes the TAG-72 antigen expressed on a variety of human carcinomas, is secreted from cultured cells as a mixture of two homodimeric isoforms. Isoform A contains two covalent interchain disulfide bonds at heavy chain positions 239 and 242, while isoform B fails to develop any interchain disulfide bonds but has 239-242 intrachain disulfide bonds instead. Form A is currently in preclinical development as a therapeutic agent for treating colorectal carcinoma, though form B shows equal efficacy. HuCC49DeltaCH2 form B can be crystallized from sodium formate only in the presence of detergents. X-ray diffraction data were collected on a single cryo-cooled crystal grown with Triton X-100 and the structure was solved by molecular replacement. The model has refined to R=0.246 (R(free)=0.297) for 2.8A data. The antibodies pack in the crystal around crystallographic 2-fold axes as tetramers with approximate 222 symmetry. Atomic force microscopy studies show that this tetrameric structure is the crystal building block and also exists free in the mother liquor. The tetramer is composed of two rings, back-to-back, with a thickness of approximately 83A. Each ring is composed of two antibodies with the complementarity-determining regions (CDR) of the two Fabs of one antibody interacting with the CDR regions of the second antibody in a head-to-head fashion. These rings are approximately 167A long and 112A wide. The C(H)3 domain is inverted with respect to the Fabs when compared to the usual orientation found in conventional antibodies. The polypeptides joining the C(H)3 domains to the Fab portions of the antibody are not seen and are almost certainly disordered. The antigen combining site of HuCC49DeltaCH2 is very similar, but not identical, in topology and charge distribution to that of antibody B72.3, which binds a similar epitope on TAG-72. The combining site consists of a deep cleft, heavily lined with aromatic amino acid side-chains but bounded by numerous charged groups.     

Accelerated exchange of a buried water molecule in selectively disulfide-reduced bovine pancreatic trypsin inhibitor

Using magnetic relaxation dispersion (MRD), we have previously shown that the four internal water molecules in bovine pancreatic trypsin inhibitor (BPTI) exchange with bulk water on time scales between 10(-8) and 10(-4) s at room temperature. Because this exchange is controlled by the protein structure, internal water molecules can be used to probe rare conformational fluctuations. Here, we report (2)H and (17)O MRD data at three temperatures for wild-type BPTI and two BPTI variants where the 14-38 disulfide bond has been cleaved by a double Cys --> Ser mutation or by disulfide reduction and carboxamidomethylation. The MRD data show that the internal water molecules are conserved on disulfide cleavage. However, the exchange rate of the water molecule buried near the disulfide bond is enhanced by 2-4 orders of magnitude. The relation of water exchange to other dynamic processes in BPTI is discussed.     

Protected hinge in the immunoglobulin G2‐A2 disulfide isoform

Human IgG2 consists of disulfide‐mediated structural isoforms, classified by the number of Fab arms disulfide‐linked to the heavy chain hinge. In the IgG2‐B isoform, both Fab arms are linked to the hinge region, and in IgG2‐A, neither Fab arm are linked to the hinge. IgG2‐A/B is a hybrid between these two forms, with only one Fab arm disulfide‐linked to the hinge. Within each of these isoform types are subtypes, with subtle disulfide‐linkage differences. Here we explored the structural basis for the A₁ and A₂ isoform subtypes. Whereas A₁ isoform converts into the A/B and B isoforms under mild redox conditions, A₂ does not. Characterization of the disulfide connectivities of A₂ isoform revealed a similar structure to A₁ isoform, with parallel inter heavy chain disulfide linkages in the hinge region. However, the hinge disulfides in A₂ isoform were resistant to reduction under conditions where A₁ isoform hinge disulfides became reduced and they required thermal treatment (>55°C) to obtain thiol‐dependent disulfide reduction. Structural analysis of the hinge region indicated that the protected disulfides were restricted to cysteines 219 and 220 of the upper hinge. Disruption of the upper hinge through insertion mutagenesis eliminated A₂ isoform behavior. ¹H NMR studies showed that the A₁ isoform Fc glycan was more dynamic than that on A₂ isoform and showed some other conformational differences. Results point to an IgG2‐A₂ upper hinge region that is more akin to the interior of a globular protein than the flexible hinge region expected on an IgG.     

Cysteine Racemization on IgG Heavy and Light Chains

Under basic pH conditions, the heavy chain 220-light chain 214 (H220-L214) disulfide bond, found in the flexible hinge region of an IgG1, can convert to a thioether. Similar conditions also result in racemization of the H220 cysteine. Here, we report that racemization occurs on both H220 and L214 on an IgG1 with a λ light chain (IgG1λ) but almost entirely on H220 of an IgGl with a κ light chain (IgG1κ) under similar conditions. Likewise, racemization was detected at significant levels on H220 and L214 on endogenous human IgG1λ but only at the H220 position on IgG1κ. Low but measurable levels of d-cysteines were found on IgG2 cysteines in the hinge region, both with monoclonal antibodies incubated under basic pH conditions and on antibodies isolated from human serum. A simplified reaction mechanism involving reversible β-elimination on the cysteine is presented that accounts for both base-catalyzed racemization and thioether formation at the hinge disulfide.     

Effect of the central disulfide bond on the unfolding behavior of elongation factor Ts homodimer from Thermus thermophilus

Functionally active elongation factor Ts (EF-Ts) from Thermus thermophilus forms a homodimer. The dimerization interface of EF-Ts is composed of two antiparallel beta-sheets that can be connected by an intermolecular disulfide bond. The stability of EF-Ts from T. thermophilus in the presence and absence of the intermolecular disulfide bond was studied by differential scanning calorimetry and circular dichroism. The ratio of the van't Hoff and calorimetric enthalpies, delta H(vH)/delta H(cal), indicates that EF-Ts undergoes thermal unfolding as a dimer independently of the presence or absence of the disulfide bond. This can be concluded from (1) the presence of residual secondary structure above the thermal transition temperature, (2) the absence of concentration dependence, which would be expected for dissociation of the dimer prior to unfolding of the monomers, and (3) a relatively low heat capacity change (delta Cp) upon unfolding. The retained dimeric structure of the thermally denatured state allowed for the determination of the effect of the intermolecular disulfide bond on the conformational stability of EF-Ts, which is deltadelta G(S-S,SH HS) = 10.5 kJ/mol per monomer at 72.5 degrees C. The possible physiological implications of the dimeric EF-Ts structure and of the intersubunit disulfide bond for the extreme conformational stability of proteins in thermophiles are discussed.     

Synthesis of cyclic peptides and peptide libraries on a new disulfide linker.

A new cysteine-based disulfide linker for Fmoc solid phase peptide synthesis was developed (Fmoc-Cys(3-mercapto-3-methylbutanoic acid)OPp) that allows the on-resin assembly and side chain deprotection of cyclic peptides. Model peptides and a cyclic peptide library of the structure [a-a-x-x-a-a-c] composed of D-amino acids were assembled and the synthesis and cleavage conditions studied. The best cyclization results were obtained with PyBOP/HOAt/diisopropylethyl amine. Racemization rates of the cysteine in the analyzed model sequences were between 5.2 and 12.3%. Cleavage of the disulfide bond was best carried out with DTT in 50% 2-propanol/100 mM ammonium bicarbonate. The cleaved peptides can be used directly in biological assays.     

Hierarchical formation of disulfide bonds in the immunoglobulin Fc fragment is assisted by protein-disulfide isomerase

Antibodies provide an excellent system to study the folding and assembly of all beta-sheet proteins and to elucidate the hierarchy of intra/inter chain disulfide bonds formation during the folding process of multimeric and multidomain proteins. Here, the folding process of the Fc fragment of the heavy chain of the antibody MAK33 was investigated. The Fc fragment consists of the C(H)3 and C(H)2 domains of the immunoglobulin heavy chain, both containing a single S-S bond. The folding process was investigated both in the absence and presence of the folding catalyst protein-disulfide isomerase (PDI), monitoring the evolution of intermediates by electrospray mass spectrometry. Moreover, the disulfide bonds present at different times in the folding mixture were identified by mass mapping to determine the hierarchy of disulfide bond formation. The analysis of the uncatalyzed folding showed that the species containing one intramolecular disulfide predominated throughout the entire process, whereas the fully oxidized Fc fragment never accumulated in significant amounts. This result suggests the presence of a kinetic trap during the Fc folding, preventing the one-disulfide-containing species (1S2H) to reach the fully oxidized protein (2S). The assignment of disulfide bonds revealed that 1S2H is a homogeneous species characterized by the presence of a single disulfide bond (Cys-130-Cys-188) belonging to the C(H)3 domain. When the folding experiments were carried out in the presence of PDI, the completely oxidized species accumulated and predominated at later stages of the process. This species contained the two native S-S bonds of the Fc protein. Our results indicate that the two domains of the Fc fragment fold independently, with a precise hierarchy of disulfide formation in which the disulfide bond, especially, of the C(H)2 domain requires catalysis by PDI.     

Cysteine residues required for the attachment of the light chain in human IgA2

In humans, there are two subclasses of IgA, IgA1 and IgA2, with IgA2 existing as three allotypes, IgA2m(1), IgA2m(2) and IgA2(n). In IgA1, Cys(133) in C(H)1 forms the disulfide bond to the L chain. Our previous studies indicated that in IgA2 lacking Cys(133), a disulfide bond forms between the alpha-chain and the L chain when Cys(220) is followed by Arg(221), but not when Cys(220) is followed by Pro(221), suggesting that the Cys in C(H)1 might be involved in disulfide bonding to the L chain. However, here we show that covalent assembly of the H and L chains in IgA2(n) requires hinge-proximal Cys(241) and Cys(242) in C(H)2 and not Cys(196) or Cys(220) in C(H)1. Using pulse-chase experiments, we have demonstrated that wild-type IgA2(n) with Arg(221) and Cys(241) and Cys(242) assembles through a disulfide-bonded HL intermediate. In contrast, the major intermediate for IgA2 m(1) with Pro(221) assembly was H(2) even though both Cys(241) and Cys(242) were present. Only a small fraction of IgA2 m(1) assembles through disulfide-bonded HL. Overall, our studies indicate that for IgA2 covalent assembly of the H and L chains requires the hinge-proximal cysteines in C(H)2 and that the structure of C(H)1 influences the efficiency with which this covalent bond forms.     

Thioredoxin-2 but not thioredoxin-1 is a substrate of thioredoxin peroxidase-1 from Drosophila melanogaster: isolation and characterization of a second thioredoxin in D. Melanogaster and evidence for distinct biological functions of Trx-1 and Trx-2

As Drosophila melanogaster does not contain glutathione reductase, the thioredoxin system has a key function for glutathione disulfide reduction in insects (Kanzok, S. M., Fechner, A., Bauer, H., Ulschmid, J. K., Müller, H. M., Botella-Munoz, J., Schneuwly, S., Schirmer, R. H., and Becker, K. (2001) Science 291, 643-646). In view of these unique conditions, the protein systems participating in peroxide metabolism and in redox signaling are of special interest. The genes for a second thioredoxin (DmTrx-2) and a thioredoxin peroxidase (DmTPx-1) were cloned and expressed, and the proteins were characterized. In its disulfide form, the 13-kDa protein thioredoxin-2 is a substrate of thioredoxin reductase-1 (K(m) = 5.2 microm, k(cat) = 14.5 s(-1)) and in its dithiol form, an electron donor for TPx-1 (K(m) = 9 microm, k(cat) = 5.4 s(-1)). DmTrx-2 is capable of reducing glutathione disulfide with a second order rate constant of 170 m(-1) s(-1) at pH 7.4 and 25 degrees C. Western blot analysis indicated that this thioredoxin represents up to 1% of the extractable protein of D. melanogaster Schneider cells or whole fruit flies. Recombinant thioredoxin peroxidase-1 (subunit molecular mass = 23 kDa) was found to be a decameric protein that can efficiently use Trx-2 but not Trx-1 as a reducing substrate. The new electron pathway found in D. melanogaster is also representative for insects that serve as vectors of disease. As a first step we have cloned and functionally expressed the gene that is the orthologue of DmTrx-2 in the malaria mosquito Anopheles gambiae.     

Regulation of the catalytic activity and structure of human thioredoxin 1 via oxidation and S-nitrosylation of cysteine residues

The mammalian cytosolic/nuclear thioredoxin system, comprising thioredoxin (Trx), selenoenzyme thioredoxin reductase (TrxR), and NADPH, is the major protein-disulfide reductase of the cell and has numerous functions. The active site of reduced Trx comprises Cys(32)-Gly-Pro-Cys(35) thiols that catalyze target disulfide reduction, generating a disulfide. Human Trx1 has also three structural Cys residues in positions 62, 69, and 73 that upon diamide oxidation induce a second Cys(62)-Cys(69) disulfide as well as dimers and multimers. We have discovered that after incubation with H(2)O(2) only monomeric two-disulfide molecules are generated, and they are inactive but able to regain full activity in an autocatalytic process in the presence of NADPH and TrxR. There are conflicting results regarding the effects of S-nitrosylation on Trx antioxidant functions and which residues are involved. We found that S-nitrosoglutathione-mediated S-nitrosylation at physiological pH is critically dependent on the redox state of Trx. Starting from fully reduced human Trx, both Cys(69) and Cys(73) were nitrosylated, and the active site formed a disulfide; the nitrosylated Trx was not a substrate for TrxR but regained activity after a lag phase consistent with autoactivation. Treatment of a two-disulfide form of Trx1 with S-nitrosoglutathione resulted in nitrosylation of Cys(73), which can act as a trans-nitrosylating agent as observed by others to control caspase 3 activity (Mitchell, D. A., and Marletta, M. A. (2005) Nat. Chem. Biol. 1, 154-158). The reversible inhibition of human Trx1 activity by H(2)O(2) and NO donors is suggested to act in cell signaling via temporal control of reduction for the transmission of oxidative and/or nitrosative signals in thiol redox control.     

Engineering an improved IgG4 molecule with reduced disulfide bond heterogeneity and increased Fab domain thermal stability

The integrity of antibody structure, stability, and biophysical characterization are becoming increasingly important as antibodies receive increasing scrutiny from regulatory authorities. We altered the disulfide bond arrangement of an IgG4 molecule by mutation of the Cys at the N terminus of the heavy chain constant domain 1 (C(H)1) (Kabat position 127) to a Ser and introduction of a Cys at a variety of positions (positions 227-230) at the C terminus of C(H)1. An inter-LC-C(H)1 disulfide bond is thus formed, which mimics the disulfide bond arrangement found in an IgG1 molecule. The antibody species present in the supernatant following transient expression in Chinese hamster ovary cells were analyzed by immunoblot to investigate product homogeneity, and purified product was analyzed by a thermofluor assay to determine thermal stability. We show that the light chain can form an inter-LC-C(H)1 disulfide bond with a Cys when present at several positions on the upper hinge (positions 227-230) and that such engineered disulfide bonds can consequently increase the Fab domain thermal stability between 3 and 6.8 °C. The IgG4 disulfide mutants displaying the greatest increase in Fab thermal stability were also the most homogeneous in terms of disulfide bond arrangement and antibody species present. Importantly, mutations did not affect the affinity for antigen of the resultant molecules. In combination with the previously described S241P mutation, we present an IgG4 molecule with increased Fab thermal stability and reduced product heterogeneity that potentially offers advantages for the production of IgG4 molecules.     

The oxidation of yeast alcohol dehydrogenase-1 by hydrogen peroxide in vitro

Yeast alcohol dehydrogenase (YADH) plays an important role in the conversion of alcohols to aldehydes or ketones. YADH-1 is a zinc-containing protein, and it accounts for the major part of ADH activity in growing baker's yeast. To gain insight into how oxidative modification of the enzyme affects its function, we exposed YADH-1 to hydrogen peroxide in vitro and assessed the oxidized protein by LC-MS/MS analysis of proteolytic cleavage products of the protein and by measurements of enzymatic activity, zinc release, and thiol/thiolate loss. The results illustrated that Cys43 and Cys153, which reside at the active site of the protein, could be selectively oxidized to cysteine sulfinic acid (Cys-SO2H) and cysteine sulfonic acid (Cys-SO3H). In addition, H2O2 induced the formation of three disulfide bonds: Cys43-Cys153 in the catalytic domain, Cys103-Cys111 in the noncatalytic zinc center, and Cys276-Cys277. Therefore, our results support the notion that the oxidation of cysteine residues in the zinc-binding domain of proteins can go beyond the formation of disulfide bond(s); the formation of Cys-SO2H and Cys-SO3H is also possible. Furthermore, most methionines could be oxidized to methionine sulfoxides. Quantitative measurement results revealed that, among all the cysteine residues, Cys43 was the most susceptible to H2O2 oxidation, and the major oxidation products of this cysteine were Cys-SO2H and Cys-SO3H. The oxidation of Cys43 might be responsible for the inactivation of the enzyme upon H2O2 treatment.