Slow Conformational Changes in MutS and DNA Direct Ordered Transitions between Mismatch Search,Recognition and Signaling of DNA Repair

MutS functions in mismatch repair (MMR) to scan DNA for errors, identify a target site and trigger subsequent events in the pathway leading to error removal and DNA re-synthesis. These actions, enabled by the ATPase activity of MutS, are now beginning to be analyzed from the perspective of the protein itself. This study provides the first ensemble transient kinetic data on MutS conformational dynamics as it works with DNA and ATP in MMR. Using a combination of fluorescence probes (on Thermus aquaticus MutS and DNA) and signals (intensity, anisotropy and resonance energy transfer), we have monitored the timing of key conformational changes in MutS that are coupled to mismatch binding and recognition, ATP binding and hydrolysis, as well as sliding clamp formation and signaling of repair. Significant findings include (a) a slow step that follows weak initial interaction between MutS and DNA, in which concerted conformational changes in both macromolecules control mismatch recognition, and (b) rapid, binary switching of MutS conformations that is concerted with ATP binding and hydrolysis and (c) is stalled after mismatch recognition to control formation of the ATP-bound MutS sliding clamp. These rate-limiting pre- and post-mismatch recognition events outline the mechanism of action of MutS on DNA during initiation of MMR.     

Dual role of MutS glutamate 38 in DNA mismatch discrimination and in the authorization of repair

MutS plays a critical role in DNA mismatch repair in Escherichia coli by binding to mismatches and initiating repair in an ATP-dependent manner. Mutational analysis of a highly conserved glutamate, Glu38, has revealed its role in mismatch recognition by enabling MutS to discriminate between homoduplex and mismatched DNA. Crystal structures of MutS have shown that Glu38 forms a hydrogen bond to one of the mismatched bases. In this study, we have analyzed the crystal structures, DNA binding and the response to ATP binding of three Glu38 mutants. While confirming the role of the negative charge in initial discrimination, we show that in vivo mismatch repair can proceed even when discrimination is low. We demonstrate that the formation of a hydrogen bond by residue 38 to the mismatched base authorizes repair by inducing intramolecular signaling, which results in the inhibition of rapid hydrolysis of distally bound ATP. This allows formation of the stable MutS-ATP-DNA clamp, a key intermediate in triggering downstream repair events.     

Formation of a DNA mismatch repair complex mediated by ATP

The mismatch repair proteins, MutS and MutL, interact in a DNA mismatch and ATP-dependent manner to activate downstream events in repair. Here, we assess the role of ATP binding and hydrolysis in mismatch recognition by MutS and the formation of a ternary complex involving MutS and MutL bound to a mismatched DNA. We show that ATP reduces the affinity of MutS for mismatched DNA and that the modulation of DNA binding affinity by nucleotide is even more pronounced for MutS E694A, a protein that binds ATP but is defective for ATP hydrolysis. Despite the ATP hydrolysis defect, E694A, like WT MutS, undergoes rapid, ATP-dependent dissociation from a DNA mismatch. Furthermore, MutS E694A retains the ability to interact with MutL on mismatched DNA. The recruitment of MutL to a mismatched DNA by MutS is also observed for two mutant MutL proteins, E29A, defective for ATP hydrolysis, and R266A, defective for DNA binding. These results suggest that ATP binding in the absence of hydrolysis is sufficient to trigger formation of a MutS sliding clamp. However, recruitment of MutL results in the formation of a dynamic ternary complex that we propose is the intermediate that signals subsequent repair steps requiring ATP hydrolysis.     

Mechanism of MutS searching for DNA mismatches and signaling repair

DNA mismatch repair is initiated by the recognition of mismatches by MutS proteins. The mechanism by which MutS searches for and recognizes mismatches and subsequently signals repair remains poorly understood. We used single-molecule analyses of atomic force microscopy images of MutS-DNA complexes, coupled with biochemical assays, to determine the distributions of conformational states, the DNA binding affinities, and the ATPase activities of wild type and two mutants of MutS, with alanine substitutions in the conserved Phe-Xaa-Glu mismatch recognition motif. We find that on homoduplex DNA, the conserved Glu, but not the Phe, facilitates MutS-induced DNA bending, whereas at mismatches, both Phe and Glu promote the formation of an unbent conformation. The data reveal an unusual role for the Phe residue in that it promotes the unbending, not bending, of DNA at mismatch sites. In addition, formation of the specific unbent MutS-DNA conformation at mismatches appears to be required for the inhibition of ATP hydrolysis by MutS that signals initiation of repair. These results provide a structural explanation for the mechanism by which MutS searches for and recognizes mismatches and for the observed phenotypes of mutants with substitutions in the Phe-Xaa-Glu motif.     

Crystal structure and biochemical analysis of the MutS.ADP.beryllium fluoride complex suggests a conserved mechanism for ATP interactions in mismatch repair

During mismatch repair ATP binding and hydrolysis activities by the MutS family proteins are important for both mismatch recognition and for transducing mismatch recognition signals to downstream repair factors. Despite intensive efforts, a MutS.ATP.DNA complex has eluded crystallographic analysis. Searching for ATP analogs that strongly bound to Thermus aquaticus (Taq) MutS, we found that ADP.beryllium fluoride (ABF), acted as a strong inhibitor of several MutS family ATPases. Furthermore, ABF promoted the formation of a ternary complex containing the Saccharomyces cerevisiae MSH2.MSH6 and MLH1.PMS1 proteins bound to mismatch DNA but did not promote dissociation of MSH2.MSH6 from mismatch DNA. Crystallographic analysis of the Taq MutS.DNA.ABF complex indicated that although this complex was very similar to that of MutS.DNA.ADP, both ADP.Mg(2+) moieties in the MutS. DNA.ADP structure were replaced by ABF. Furthermore, a disordered region near the ATP-binding pocket in the MutS B subunit became traceable, whereas the equivalent region in the A subunit that interacts with the mismatched nucleotide remained disordered. Finally, the DNA binding domains of MutS together with the mismatched DNA were shifted upon binding of ABF. We hypothesize that the presence of ABF is communicated between the two MutS subunits through the contact between the ordered loop and Domain III in addition to the intra-subunit helical lever arm that links the ATPase and DNA binding domains.     

ATP increases the affinity between MutS ATPase domains. Implications for ATP hydrolysis and conformational changes

MutS is the key protein of the Escherichia coli DNA mismatch repair system. It recognizes mispaired and unpaired bases and has intrinsic ATPase activity. ATP binding after mismatch recognition by MutS serves as a switch that enables MutL binding and the subsequent initiation of mismatch repair. However, the mechanism of this switch is poorly understood. We have investigated the effects of ATP binding on the MutS structure. Crystallographic studies of ATP-soaked crystals of MutS show a trapped intermediate, with ATP in the nucleotide-binding site. Local rearrangements of several residues around the nucleotide-binding site suggest a movement of the two ATPase domains of the MutS dimer toward each other. Analytical ultracentrifugation experiments confirm such a rearrangement, showing increased affinity between the ATPase domains upon ATP binding and decreased affinity in the presence of ADP. Mutations of specific residues in the nucleotide-binding domain reduce the dimer affinity of the ATPase domains. In addition, ATP-induced release of DNA is strongly reduced in these mutants, suggesting that the two activities are coupled. Hence, it seems plausible that modulation of the affinity between ATPase domains is the driving force for conformational changes in the MutS dimer. These changes are driven by distinct amino acids in the nucleotide-binding site and form the basis for long-range interactions between the ATPase domains and DNA-binding domains and subsequent binding of MutL and initiation of mismatch repair.     

MutS recognition: Multiple mismatches and sequence context effects

Escherichia coli MutS is a versatile repair protein that specifically recognizes not only various types of mismatches but also single stranded loops of up to 4 nucleotides in length. Specific binding, followed by the next step of tracking the DNA helix that locates hemi-methylated sites, is regulated by the conformational state of the protein as a function of ATP binding/hydrolysis. Here, we study how various molecular determinants of a heteroduplex regulate mismatch recognition by MutS, the critical first step of mismatch repair. Using classical DNase I footprinting assays, we demonstrate that the hierarchy of MutS binding to various types of mismatches is identical whether the mismatches are present singly or in multiples. Moreover, this unique hierarchy is indifferent both to the differential level of DNA helical flexibility and to the unpaired status of the mismatched bases in a heteroduplex. Surprisingly, multiple mismatches exhibit reduced affinity of binding to MutS, compared to that of a similar single mismatch. Such a reduction in the affinity might be due to sequence context effects, which we established more directly by studying two identical single mismatches in an altered sequence background. A mismatch, upon simply being flipped at the same location, elicits changes in MutS specific contacts, thereby underscoring the importance of sequence context in modulating MutS binding to mismatches.     

Functional studies on the candidate ATPase domains of Saccharomyces cerevisiae MutLalpha

Saccharomyces cerevisiae MutL homologues Mlh1p and Pms1p form a heterodimer, termed MutLalpha, that is required for DNA mismatch repair after mismatch binding by MutS homologues. Recent sequence and structural studies have placed the NH(2) termini of MutL homologues in a new family of ATPases. To address the functional significance of this putative ATPase activity in MutLalpha, we mutated conserved motifs for ATP hydrolysis and ATP binding in both Mlh1p and Pms1p and found that these changes disrupted DNA mismatch repair in vivo. Limited proteolysis with purified recombinant MutLalpha demonstrated that the NH(2) terminus of MutLalpha undergoes conformational changes in the presence of ATP and nonhydrolyzable ATP analogs. Furthermore, two-hybrid analysis suggested that these ATP-binding-induced conformational changes promote an interaction between the NH(2) termini of Mlh1p and Pms1p. Surprisingly, analysis of specific mutants suggested differential requirements for the ATPase motifs of Mlh1p and Pms1p during DNA mismatch repair. Taken together, these results suggest that MutLalpha undergoes ATP-dependent conformational changes that may serve to coordinate downstream events during yeast DNA mismatch repair.     

Mechanism for verification of mismatched and homoduplex DNAs by nucleotides‐bound MutS analyzed by molecular dynamics simulations

In order to understand how MutS recognizes mismatched DNA and induces the reaction of DNA repair using ATP, the dynamics of the complexes of MutS (bound to the ADP and ATP nucleotides, or not) and DNA (with mismatched and matched base‐pairs) were investigated using molecular dynamics simulations. As for DNA, the structure of the base‐pairs of the homoduplex DNA which interacted with the DNA recognition site of MutS was intermittently disturbed, indicating that the homoduplex DNA was unstable. As for MutS, the disordered loops in the ATPase domains, which are considered to be necessary for the induction of DNA repair, were close to (away from) the nucleotide‐binding sites in the ATPase domains when the nucleotides were (not) bound to MutS. This indicates that the ATPase domains changed their structural stability upon ATP binding using the disordered loop. Conformational analysis by principal component analysis showed that the nucleotide binding changed modes which have structurally solid ATPase domains and the large bending motion of the DNA from higher to lower frequencies. In the MutS–mismatched DNA complex bound to two nucleotides, the bending motion of the DNA at low frequency modes may play a role in triggering the formation of the sliding clamp for the following DNA‐repair reaction step. Moreover, MM‐PBSA/GBSA showed that the MutS–homoduplex DNA complex bound to two nucleotides was unstable because of the unfavorable interactions between MutS and DNA. This would trigger the ATP hydrolysis or separation of MutS and DNA to continue searching for mismatch base‐pairs. Proteins 2016; 84:1287–1303. © 2016 Wiley Periodicals, Inc.     

The effects of nucleotides on MutS-DNA binding kinetics clarify the role of MutS ATPase activity in mismatch repair

MutS protein initiates mismatch repair with recognition of a non-Watson-Crick base-pair or base insertion/deletion site in DNA, and its interactions with DNA are modulated by ATPase activity. Here, we present a kinetic analysis of these interactions, including the effects of ATP binding and hydrolysis, reported directly from the mismatch site by 2-aminopurine fluorescence. When free of nucleotides, the Thermus aquaticus MutS dimer binds a mismatch rapidly (k(ON)=3 x 10(6) M(-1) s(-1)) and forms a stable complex with a half-life of 10 s (k(OFF)=0.07 s(-1)). When one or both nucleotide-binding sites on the MutS*mismatch complex are occupied by ATP, the complex remains fairly stable, with a half-life of 5-7 s (k(OFF)=0.1-0.14 s(-1)), although MutS(ATP) becomes incapable of (re-)binding the mismatch. When one or both nucleotide-binding sites on the MutS dimer are occupied by ADP, the MutS*mismatch complex forms rapidly (k(ON)=7.3 x 10(6) M(-1) s(-1)) and also dissociates rapidly, with a half-life of 0.4 s (k(OFF)=1.7 s(-1)). Integration of these MutS DNA-binding kinetics with previously described ATPase kinetics reveals that: (a) in the absence of a mismatch, MutS in the ADP-bound form engages in highly dynamic interactions with DNA, perhaps probing base-pairs for errors; (b) in the presence of a mismatch, MutS stabilized in the ATP-bound form releases the mismatch slowly, perhaps allowing for onsite interactions with downstream repair proteins; (c) ATP-bound MutS then moves off the mismatch, perhaps as a mobile clamp facilitating repair reactions at distant sites on DNA, until ATP is hydrolyzed (or dissociates) and the protein turns over.     

Mismatch recognition-coupled stabilization of Msh2-Msh6 in an ATP-bound state at the initiation of DNA repair

Mismatch repair proteins correct errors in DNA via an ATP-driven process. In eukaryotes, the Msh2-Msh6 complex recognizes base pair mismatches and small insertion/deletions in DNA and initiates repair. Both Msh2 and Msh6 proteins contain Walker ATP-binding motifs that are necessary for repair activity. To understand how these proteins couple ATP binding and hydrolysis to DNA binding/mismatch recognition, the ATPase activity of Saccharomyces cerevisiae Msh2-Msh6 was examined under pre-steady-state conditions. Acid-quench experiments revealed that in the absence of DNA, Msh2-Msh6 hydrolyzes ATP rapidly (burst rate = 3 s(-1) at 20 degrees C) and then undergoes a slow step in the pathway that limits catalytic turnover (k(cat) = 0.1 s(-1)). ATP is hydrolyzed similarly in the presence of fully matched duplex DNA; however, in the presence of a G:T mismatch or +T insertion-containing DNA, ATP hydrolysis is severely suppressed (rate = 0.1 s(-1)). Pulse-chase experiments revealed that Msh2-Msh6 binds ATP rapidly in the absence or in the presence of DNA (rate = 0.1 microM(-1) s(-1)), indicating that for the Msh2-Msh6.mismatched DNA complex, a step after ATP binding but before or at ATP hydrolysis is the rate-limiting step in the pathway. Thus, mismatch recognition is coupled to a dramatic increase in the residence time of ATP on Msh2-Msh6. This mismatch-induced, stable ATP-bound state of Msh2-Msh6 likely signals downstream events in the repair pathway.     

MutL-catalyzed ATP hydrolysis is required at a post-UvrD loading step in methyl-directed mismatch repair

Methyl-directed mismatch repair is a coordinated process that ensures replication fidelity and genome integrity by resolving base pair mismatches and insertion/deletion loops. This post-replicative event involves the activities of several proteins, many of which appear to be regulated by MutL. MutL interacts with and modulates the activities of MutS, MutH, UvrD, and perhaps other proteins. The purified protein catalyzes a slow ATP hydrolysis reaction that is essential for its role in mismatch repair. However, the role of the ATP hydrolysis reaction is not understood. We have begun to address this issue using two point mutants: MutL-E29A, which binds nucleotide but does not catalyze ATP hydrolysis, and MutL-D58A, which does not bind nucleotide. As expected, both mutants failed to complement the loss of MutL in genetic assays. Purified MutL-E29A protein interacted with MutS and stimulated the MutH-catalyzed nicking reaction in a mismatch-dependent manner. Importantly, MutL-E29A stimulated the loading of UvrD on model substrates. In fact, stimulation of UvrD-catalyzed unwinding was more robust with MutL-E29A than the wild-type protein. MutL-D58A, on the other hand, did not interact with MutS, stimulate MutH-catalyzed nicking, or stimulate the loading of UvrD. We conclude that ATP-bound MutL is required for the incision steps associated with mismatch repair and that ATP hydrolysis by MutL is required for a step in the mismatch repair pathway subsequent to the loading of UvrD and may serve to regulate helicase loading.     

Using stable MutS dimers and tetramers to quantitatively analyze DNA mismatch recognition and sliding clamp formation

The process of DNA mismatch repair is initiated when MutS recognizes mismatched DNA bases and starts the repair cascade. The Escherichia coli MutS protein exists in an equilibrium between dimers and tetramers, which has compromised biophysical analysis. To uncouple these states, we have generated stable dimers and tetramers, respectively. These proteins allowed kinetic analysis of DNA recognition and structural analysis of the full-length protein by X-ray crystallography and small angle X-ray scattering. Our structural data reveal that the tetramerization domains are flexible with respect to the body of the protein, resulting in mostly extended structures. Tetrameric MutS has a slow dissociation from DNA, which can be due to occasional bending over and binding DNA in its two binding sites. In contrast, the dimer dissociation is faster, primarily dependent on a combination of the type of mismatch and the flanking sequence. In the presence of ATP, we could distinguish two kinetic groups: DNA sequences where MutS forms sliding clamps and those where sliding clamps are not formed efficiently. Interestingly, this inability to undergo a conformational change rather than mismatch affinity is correlated with mismatch repair.     

Composite active site of an ABC ATPase: MutS uses ATP to verify mismatch recognition and authorize DNA repair

The MutS protein initiates DNA mismatch repair by recognizing mispaired and unpaired bases embedded in duplex DNA and activating endo- and exonucleases to remove the mismatch. Members of the MutS family also possess a conserved ATPase activity that belongs to the ATP binding cassette (ABC) superfamily. Here we report the crystal structure of a ternary complex of MutS-DNA-ADP and assays of initiation of mismatch repair in conjunction with perturbation of the composite ATPase active site by mutagenesis. These studies indicate that MutS has to bind both ATP and the mismatch DNA simultaneously in order to activate the other mismatch repair proteins. We propose that the MutS ATPase activity plays a proofreading role in DNA mismatch repair, verification of mismatch recognition, and authorization of repair.     

Modulation of MutS ATP hydrolysis by DNA cofactors

Escherichia coli MutS protein, which is required for mismatch repair, has a slow ATPase activity that obeys Michalelis-Menten kinetics. At 37 degrees C, the steady-state turnover rate for ATP hydrolysis is 1.0 +/- 0.3 min(-1) per monomer equivalent with a K(m) of 33 +/- 6 microM. Hydrolysis is competitively inhibited by the ATP analogues AMPPNP and ATPgammaS, with K(i) values of 4 microM in both cases, and by ADP with a K(i) of 40 microM. The rate of ATP hydrolysis is stimulated 2-5-fold by short hetero- and homoduplex DNAs. The concentration of DNA cofactor that yields half-maximal stimulation is lowest for oligodeoxynucleotide duplexes that contain a mismatched base pair. Pre-steady-state chemical quench analysis has demonstrated a substoichiometric initial burst of ADP formation by free MutS that is governed by a rate constant of 78 min(-1), indicating that the rate-limiting step for the steady-state reaction occurs after hydrolysis. Prebinding of MutS to homoduplex DNA does not alter the burst kinetics or amplitude but only increases the steady-state rate. In contrast, binding of the protein to heteroduplex DNA abolishes the burst of ADP formation, indicating that the rate-limiting step now occurs before hydrolysis. Gel filtration analysis indicates that the MutS dimer assembles into higher order oligomers in a concentration-dependent manner, and that ATP binding shifts this equilibrium to favor assembly. These results, together with kinetic findings, indicate nonequivalence of subunits within a MutS oligomer with respect to ATP hydrolysis and DNA binding.     

The molecular mechanism of DNA damage recognition by MutS homologs and its consequences for cell death response

We determined the molecular mechanism of cell death response by MutS homologs in distinction to the repair event. Key protein–DNA contacts differ in the interaction of MutS homologs with cisplatinated versus mismatched DNA. Mutational analyses of protein–DNA contacts, which were predicted by molecular dynamics (MD) simulations, were performed. Mutations in suggested interaction sites can affect repair and cell death response independently, and to different extents. A glutamate residue is identified as the key contact with cisplatin-DNA. Mutation of the residue increases cisplatin resistance due to increased non-specific DNA binding. In contrast, the conserved phenylalanine that is instrumental and indispensable for mismatch recognition during repair is not required for cisplatin cytotoxicity. These differences in protein–DNA interactions are translated into localized conformational changes that affect nucleotide requirements and inter-subunit interactions. Specifically, the ability for ATP binding/hydrolysis has little consequence for the MMR-dependent damage response. As a consequence, intersubunit contacts are altered that most likely affect the interaction with downstream proteins. We here describe the interaction of MutS homologs with DNA damage, as it differs from the interaction with a mismatch, and its structural translation into all other functional regions of the protein as a mechanism to initiate cell death response and concomitantly inhibit repair.     

Large conformational changes in MutS during DNA scanning, mismatch recognition and repair signalling

MutS protein recognizes mispaired bases in DNA and targets them for mismatch repair. Little is known about the transient conformations of MutS as it signals initiation of repair. We have used single-molecule fluorescence resonance energy transfer (FRET) measurements to report the conformational dynamics of MutS during this process. We find that the DNA-binding domains of MutS dynamically interconvert among multiple conformations when the protein is free and while it scans homoduplex DNA. Mismatch recognition restricts MutS conformation to a single state. Steady-state measurements in the presence of nucleotides suggest that both ATP and ADP must be bound to MutS during its conversion to a sliding clamp form that signals repair. The transition from mismatch recognition to the sliding clamp occurs via two sequential conformational changes. These intermediate conformations of the MutS:DNA complex persist for seconds, providing ample opportunity for interaction with downstream proteins required for repair.     

MutS mediates heteroduplex loop formation by a translocation mechanism.

Interaction of Escherichia coli MutS and MutL with heteroduplex DNA has been visualized by electron microscopy. In a reaction dependent on ATP hydrolysis, complexes between a MutS dimer and a DNA heteroduplex are converted to protein-stabilized, alpha-shaped loop structures with the mismatch in most cases located within the DNA loop. Loop formation depends on ATP hydrolysis and loop size increases linearly with time at a rate of 370 base pairs/min in phosphate buffer and about 10,000 base pairs/min in the HEPES buffer used for repair assay. These observations suggest a translocation mechanism in which a MutS dimer bound to a mismatch subsequently leaves this site by ATP-dependent tracking or unidimensional movement that is in most cases bidirectional from the mispair. In view of the bidirectional capability of the methyl-directed pathway, this reaction may play a role in determination of heteroduplex orientation. The rate of MutS-mediated DNA loop growth is enhanced by MutL, and when both proteins are present, both are found at the base of alpha-loop structures, and both can remain associated with excision intermediates produced in later stages of the reaction.     

Msh2 separation of function mutations confer defects in the initiation steps of mismatch repair

In eukaryotes the MSH2-MSH3 and MSH2-MSH6 heterodimers initiate mismatch repair (MMR) by recognizing and binding to DNA mismatches. The MLH1-PMS1 heterodimer then interacts with the MSH proteins at or near the mismatch site and is thought to act as a mediator to recruit downstream repair proteins. Here we analyzed five msh2 mutants that are functional in removing 3' non-homologous tails during double-strand break repair but are completely defective in MMR. Because non-homologous tail removal does not require MSH6, MLH1, or PMS1 functions, a characterization of the msh2 separation of function alleles should provide insights into early steps in MMR. Using the Taq MutS crystal structure as a model, three of the msh2 mutations, msh2-S561P, msh2-K564E, msh2-G566D, were found to map to a domain in MutS involved in stabilizing mismatch binding. Gel mobility shift and DNase I footprinting assays showed that two of these mutations conferred strong defects on MSH2-MSH6 mismatch binding. The other two mutations, msh2-S656P and msh2-R730W, mapped to the ATPase domain. DNase I footprinting, ATP hydrolysis, ATP binding, and MLH1-PMS1 interaction assays indicated that the msh2-S656P mutation caused defects in ATP-dependent dissociation of MSH2-MSH6 from mismatch DNA and in interactions between MSH2-MSH6 and MLH1-PMS1. In contrast, the msh2-R730W mutation disrupted MSH2-MSH6 ATPase activity but did not strongly affect ATP binding or interactions with MLH1-PMS1. These results support a model in which MMR can be dissected into discrete steps: stable mismatch binding and sensing, MLH1-PMS1 recruitment, and recycling of MMR components.     

Altering the conserved nucleotide binding motif in the Salmonella typhimurium MutS mismatch repair protein affects both its ATPase and mismatch binding activities.

The Salmonella typhimurium and Escherichia coli MutS protein is one of several methyl-directed mismatch repair proteins that act together to correct replication errors. MutS is homologous to the Streptococcus pneumoniae HexA mismatch repair protein and to the Duc1 and Rep1 proteins of human and mouse. Homology between the deduced amino acid sequence of both MutS and HexA, and the type A nucleotide binding site consensus sequence, suggested that ATP binding and hydrolysis play a role in their mismatch repair functions. We found that MutS does indeed weakly hydrolyze ATP to ADP and Pi, with a Km of 6 microM and kcat of 0.26. To show that this activity is intrinsic to MutS, we made a site-directed mutation, which resulted in the invariant lysine of the nucleotide binding consensus sequence being changed to an alanine. The mutant MutS allele was unable to complement a mutS::Tn10 mutation in vivo, and was dominant over wild type when present in high copy number. The purified mutant protein had reduced ATPase activity, with the Km affected more severely than the kcat. Like the wild type MutS protein, the mutant protein is able to bind heteroduplex DNA specifically, but the mutant protein does so with a reduced affinity.