Characterization,Gene Cloning,and Sequencing of a Fungal Phytase,PhyA, From Penicillium oxalicum PJ3

A phytase from Penicillium oxalicum PJ3, PhyA, was purified near to homogeneity with 427-fold increase in specific phytase activity by ammonium sulfate precipitation, gel filtration, and ion-exchange chromatographies. Sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) and zymogram analysis of the purified enzyme indicated an estimated molecular mass of 65 kD. The optimal pH and temperature of the purified enzyme were pH 4.5 and 55°C, respectively. The enzyme activity was strongly inhibited by Ca²⁺, Cu²⁺, Zn²⁺, and phenylmethylsulfonyl fluoride (PMSF). The K_m value for sodium phytate was 0.545 mM with a V_max of 600 U/mg of protein. The phyA gene was cloned, and it contains an open reading frame of 1,383 with a single intron (118 bp), and encodes a protein of 461 amino acids.     

Production and characterization of thermostable alkaline phytase from <Emphasis Type="Italic">Bacillus laevolacticus</Emphasis> isolated from rhizosphere soil

A novel phytase producing thermophilic strain of Bacillus laevolacticus insensitive to inorganic phosphate was isolated from the rhizosphere soil of leguminous plant methi (Medicago falacata). The culture conditions for production of phytase by B. laevolacticus under shake flask culture were optimized to obtain high levels of phytase (2.957 ± 0.002 U/ml). The partially purified phytase from B. laevolacticus strain was optimally active at 70 °C and between pH 7.0 and pH 8.0. The enzyme exhibited thermostability with ∼80% activity at 70 °C and pH 8.0 for up to 3 h in the presence/absence of 5 mM CaCl₂. The phytase from B. laevolacticus showed high specificity for phytate salts of Ca⁺ > Na⁺. The enzyme showed an apparent K _m 0.526 mM and V _max 12.3 μmole/min/mg of activity against sodium phytate.     

Extracellular Phytase (E. C. 3.1.3.8) from Aspergillus Ficuum NRRL 3135: Purification and Characterization

Extracellular phytase from Aspergillus ficuum, a glycoprotein, was purified to homogeneity in 3 column chromatographic steps using ion exchange and chromatofocusing. Results of gel filtration chromatography and SDS-polyacrylamide gel electrophoresis indicated the approximate molecular weight of the native protein to be 85–100-KDa. On the basis of a molecular weight of 85–KDa, the molar extinction coefficient of the enzyme at 280 nm was estimated to be 1.2 × 10⁴ M-l cm-1. The isoelectric point of the enzyme, as deduced by chromatofocusing, was about 4.5. The purified enzyme is remarkably stable at 0°C. Thermal inactivation studies have shown that the enzyme retained 40% of its activity after being subjected to 68°C for 10 minutes, and the enzyme exhibited a broad temperature optimum with maximum catalytic activity at 58°C. The Km of the enzyme for phytate and p-nitrophenylphosphate is about 40 uM and 265 uM, respectively, with an estimated turnover number of the enzyme for phytate of 220 per sec. Enzymatic deglycosylation of phytase by Endoglycosidase H lowered the molecular weight of native enzyme from 85–100-KDa to about 76–KDa; the digested phytase still retained some carbohydrate as judged by positive periodic acid-Schiff reagent staining of the electrophoresed protein. Immunoblotting of the phytase with monoclonal antibody 7H10 raised against purified native enzyme recognized not only native but also partially deglycosylated protein.     

Purification and Properties of a Phytate-degrading Enzyme from <Emphasis Type="Italic">Pantoea agglomerans</Emphasis>

A periplasmatic phytate-degrading enzyme from Pantoea agglomerans isolated from soil was purified about 470-fold to apparent homogeneity with a recovery of 16% referred to the phytate-degrading activity in the crude extract. It behaved as a monomeric protein with a molecular mass of about 42 kDa. The purified enzyme exhibited a single pH optimum at 4.5. Optimum temperature for the degradation of phytate was 60°C. The kinetic parameters for the hydrolysis of sodium phytate were determined to be K_M = 0.34 mmol/l and k_cat = 21 s^-1 at pH 4.5 and 37°C. The enzyme exhibited a narrow substrate selectivity. Only phytate and glucose-1-phosphate were identified as good substrates. Since this Pantoea enzyme has a strong preference for glucose-1-phosphate over phytate, under physiological conditions glucose-1-phosphate is its most likely substrate. The maximum amount of phosphate released from phytate by the purified enzyme suggests myo-inositol pentakisphosphate as the final product of enzymatic phytate degradation.     

Cloning, Expression, and Enzyme Characterization of an Acid Heat-Stable Phytase from Aspergillus fumigatus WY-2

A novel thermostable phytase gene was cloned from Aspergillus fumigatus WY-2. It was 1459 bp in size and encoded a polypeptide of 465 amino acids. The gene was expressed in Pichia pastoris GS115 as an extracellular enzyme. The expressed enzyme was purified to homogeneity and biochemically characterized. The purified enzyme had a specific activity of 51 U/mg with an approximate molecular mass of 88 kDa. The optimum pH and temperature for activity were pH 5.5 and 55°C, respectively. After incubation at 90°C for 15 min, it still remained at 43.7% of the initial activity. The enzyme showed higher affinity for sodium phytate than other phosphate conjugates, and the K_m and K_cat for sodium phytate were 114 μM and 102 s⁻¹, respectively. Incubated with pepsin at 37°C for 2 h at the ratio (pepsin/phytase, wt/wt) of 0.1, it still retained 90.1% residual activity. These exceptional properties give the newly cloned enzyme good potential in animal feed applications.     

A Thermostable phytase from <Emphasis Type="Italic">Neosartorya spinosa</Emphasis> BCC 41923 and its expression in <Emphasis Type="Italic">Pichia pastoris</Emphasis>

A phytase gene was cloned from Neosartorya spinosa BCC 41923. The gene was 1,455 bp in size, and the mature protein contained a polypeptide of 439 amino acids. The deduced amino acid sequence contains the consensus motif (RHGXRXP) which is conserved among phytases and acid phosphatases. Five possible disulfide bonds and seven potential N-glycosylation sites have been predicted. The gene was expressed in Pichia pastoris KM71 as an extracellular enzyme. The purified enzyme had specific activity of 30.95 U/mg at 37°C and 38.62 U/mg at 42°C. Molecular weight of the deglycosylated recombinant phytase, determined by SDS-PAGE, was approximately 52 kDa. The optimum pH and temperature for activity were pH 5.5 and 50°C. The residual phytase activity remained over 80% of initial activity after the enzyme was stored in pH 3.0 to 7.0 for 1 h, and at 60% of initial activity after heating at 90°C for 20 min. The enzyme exhibited broad substrate specificity, with phytic acid as the most preferred substrate. Its K _m and V _max for sodium phytate were 1.39 mM and 434.78 U/mg, respectively. The enzyme was highly resistant to most metal ions tested, including Fe²⁺, Fe³⁺, and Al³⁺. When incubated with pepsin at a pepsin/phytase ratio of 0.02 (U/U) at 37°C for 2 h, 92% of its initial activity was retained. However, the enzyme was very sensitive to trypsin, as 5% of its initial activity was recovered after treating with trypsin at a trypsin/phytase ratio of 0.01 (U/U).     

Impact of oxygen supply on rtPA expression in <Emphasis Type="Italic">Escherichia coli</Emphasis> BL21 (DE3): ammonia effects

A phytase with high activity at neutral pH and typical water temperatures (∼25°C) could effectively hydrolyze phytate in aquaculture. In this study, a phytase-producing strain, Pedobacter nyackensis MJ11 CGMCC 2503, was isolated from glacier soil, and the relevant gene, PhyP, was cloned using degenerate PCR and thermal asymmetric interlaced PCR. To our knowledge, this is the first report of detection of phytase activity and cloning of phytase gene from Pedobacter. PhyP belongs to beta-propeller phytase family and shares very low identity (∼28.5%) with Bacillus subtilis phytase. The purified recombinant enzyme (r-PhyP) from Escherichia coli displayed high specific activity for sodium phytate of 24.4 U mg⁻¹. The optimum pH was 7.0, and the optimum temperature was 45°C. The K _m, V _max, and k _cat values were 1.28 mM, 71.9 μmol min⁻¹ mg⁻¹, and 45.1 s⁻¹, respectively. Compared with Bacillus phytases, r-PhyP had higher relative activity at 25°C (r-PhyP (>50%), B. subtilis phytase (<8%)) and hydrolyzed phytate from soybean with greater efficacy at neutral pH. These characteristics suggest that r-PhyP might be a good candidate for an aquatic feed additive in the aquaculture industry.     

Gene Cloning and Characterization of a Thermostable Phytase from Bacillus subtilis US417 and Assessment of its Potential as a Feed Additive in Comparison with a Commercial Enzyme

An extracellular phytase from Bacillus subtilis US417 (PHY US417) was purified and characterized. The purified enzyme of 41 kDa was calcium-dependent and optimally active at pH 7.5 and 55°C. The thermal stability of PHY US417 was drastically improved by calcium. Indeed, it recovered 77% of its original activity after denaturation for 10 min at 75°C in the presence of 5 mM CaCl₂, while it retained only 22% of activity when incubated for 10 min at 60°C without calcium. In addition, PHY US417 was found to be highly specific for phytate and exhibited pH stability similar to Phyzyme, a commercial phytase with optimal activity at pH 5.5 and 60°C. The phytase gene was cloned by PCR from Bacillus subtilis US417. Sequence analysis of the encoded polypeptide revealed one residue difference from PhyC of Bacillus subtilis VTTE-68013 (substitution of arginine in position 257 by proline in PHY US417) which was reported to exhibit lower thermostability especially in the absence of calcium. With its neutral pH optimum as well as its great pH and thermal stability, the PHY US417 enzyme presumed to be predominantly active in the intestine has a high potential for use as feed additive.     

Purification and kinetics of a protease-resistant,neutral, and thermostable phytase from Bacillus subtilis subsp. subtilis JJBS250 ameliorating food nutrition

Abstract

A novel protease-resistant and thermostable phytase from Bacillus subtilis subsp. subtilis JJBS250 was purified 36-fold to homogeneity with a combination of ammonium sulfate precipitation followed by Q-Sepharose and Sephadex G-50 chromatographic techniques. The estimated molecular mass of the purified phytase was 46?kDa by electrophoresis with optimal activity at pH 7.0 and 70?°C. About 19% of original activity was maintained at 80?°C for 10?min. Phytase activity was stimulated in presence of surfactants like Tween-20, Tween-80, and Triton X-100 and metal ions like Ca⁺², K⁺, and Co⁺² and it was inhibited by SDS and Mg⁺², Al⁺², and Fe⁺². Purified enzyme showed specificity to different salts of phytic acid and values of K_m and V_max were 0.293?mM and 11.49 nmoles s^?1, respectively for sodium phytate. The purified enzyme was resistant to proteases (trypsin and pepsin) that resulted in amelioration of food nutrition with simultaneous release of inorganic phosphate, reducing sugars, and soluble protein.     

Recombinant production of <Emphasis Type="Italic">Penicillium oxalicum</Emphasis> PJ3 phytase in <Emphasis Type="Italic">Pichia Pastoris</Emphasis>

The 1,332 bp phytase gene of Penicillium oxalicum PJ3 was inserted into the expression vector, pPICZαA and expressed in the methylotrophic yeast, Pichia pastoris as an active, extracellular phytase. The recombinant phytase reached a maximum yield of 12 U/ml of medium at 120 h of cultivation after methanol induction under shake-flask conditions. The enzyme was glycosylated, with a molecular mass of about 62.5 kDa. The Michaelis constant (K _m) and maximum reaction rate (V _max) for sodium phytate was 0.37 mM and 526.3 U/mg of protein, respectively. The optimal activity occurred at pH 4.5 and 55°C. Jaecheon Lee and Yunjaie Choi contributed equally to this work.     

Characterization of phytase produced byAspergillus niger

The extracellular activity ofAspergillus niger phytase at the end of the growth phase was 132 nkat/mL in a laboratory bioreactor. The purified enzyme has molar mass approximately 100 kDa, pH optimum at 5.0, temperature optimum at 55°C and high pH and temperature stability. TheK _m for dodecasodium phytate, calcium phytate and 4-nitrophenyl phosphate are 0.44, 0.45 and 1.38 mmol/L, respectively. The enzyme is noncompetively inhibited by inorganic monophosphate (K _i=2.85 mmol/L) and by Cu²⁺, Zn²⁺, Hg²⁺, Sn²⁺, Cd²⁺ ions and strongly by F⁻ ones; it is activated by Ca²⁺, Mg²⁺ and Mn²⁺ ions. The substrate specificity of phytase is broad with the highest affinity to calcium phytate.     

A Novel Phytase appA from <Emphasis Type="Italic">Citrobacter amalonaticus</Emphasis> CGMCC 1696: Gene Cloning and Overexpression in <Emphasis Type="Italic">Pichia pastoris</Emphasis>

A novel phytase gene appA, with upstream and downstream sequences from Citrobacter amalonaticus CGMCC 1696, was cloned by degenerate polymerase chain reaction (PCR), and thermal asymmetric interlaced (TAIL) PCR and was overexpressed in Pichia pastoris. Sequence analysis revealed one open reading frame that consisted of 1311 bp encoding a 436–amino-acid protein, which had a deduced molecular mass of 46.3 kDa. The phytase appA belongs to the histidine acid phosphatase family and exhibits the highest identity (70.1%) with C. braakii phytase. The gene was overexpressed in P. pastoris. The secretion yield of recombinant appA protein was accumulated to approximately 4.2 mg·mL⁻¹, and the enzyme activity level reached 15,000 U·mL⁻¹, which is higher than any previous reports. r-appA was glycosylated, as shown by Endo H treatment. r-appA was purified and characterized. The specific activity of r-appA for sodium phytate was 3548 U·mg⁻¹. The optimum pH and temperature for enzyme activity were 4.5 and 55°C, respectively. r-appA was highly resistant to pepsin or trypsin treatment. This enzyme could be an economic and efficient alternative to the phytases currently used in the feed industry.     

Purification and properties of extracellular phytase from Bacillus sp. KHU-10

Bacillus species producing a thermostable phytase was isolated from soil, boiled rice, and mezu (Korean traditinal koji). The activity of phytase increased markedly at the late stationary phase. An extracellular phytase from Bacillus sp. KHU-10 was purified to homogeneity by acetone precipitation and DEAE-Sepharose and phenyl-Sepharose column chromatographies. Its molecular weight was estimated to be 46 kDa on gel filtration and 44 kDa on SDS-polyacrylamide gel elctrophoresis. Its optimum pH and temperature for phytase activity were pH 6.5-8.5 and 40°C without 10 mM CaCl₂ and pH 6.0-9.5 and 60°C with 10 mM CaCl₂. About 50% of its original activity remained after incubation at 80°C or 10 min in the presence of 10 mM CaCl₂. The enzyme activity was fairly stable from pH 6.5 to 10.0. The enzyme had an isoelectric point of 6.8. As for substrate specificity, it was very specific for sodium phytate and showed no activity on other phosphate esters. The K _m value for sodium phytate was 50 M. Its activity was inhibited by EDTA and metal ions such as Ba²⁺, Cd²⁺, Co²⁺, Cr³⁺, Cu²⁺, Hg²⁺, and Mn²⁺ ions.     

Purification and Biochemical Characterization of Phytase Enzyme from <Emphasis Type="Italic">Lactobacillus coryniformis</Emphasis> (<Emphasis Type="Italic">MH121153</Emphasis>)

Phytase (myo-inositol hexaphosphate phosphohydrolase) belongs to phosphatases. It catalyzes the hydrolysis of phytate to less-phosphorylated inorganic phosphates and phytate. Phytase is used primarily for the feeding of simple hermit animals in order to increase the usability of amino acids, minerals, phosphorus and energy. In the present study, phytase isolation from the Lactobacillus coryniformis strain, isolated from Lor cheese sources, phytase purification and characterization were studied. The phytase was purified in simple three steps. The enzyme was obtained with 2.60% recovery and a specific activity of 202.25 (EU/mg protein). The molecular mass of the enzyme was determined to be 43.25 kDa with the sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE) method. The optimum temperature and pH for the enzyme were found as 60 °C and 5.0 and respectively. To defined the substrate specificity of the phytase, the hydrolysis of several phosphorylated compounds by the purified enzyme was studied and sodium phytate showed high specificity. Furthermore, the effects of Ca²⁺, Ag⁺, Mg²⁺, Cu²⁺, Co²⁺, Pb²⁺, Zn²⁺ and Ni²⁺ metal ions on the enzyme were studied.     

Phytase produced on citric byproducts: purification and characterization

Citric pulp is an agro-industrial residue from the citrus processing industry with low inorganic phosphorus content applied in animal feed. A new bioprocess was developed to produce and purify a new phytase generated on citric pulp fermentation by Aspergillus niger FS3. The phytase was purified by cationic-exchange, anionic-exchange chromatography and chromatofocusing steps. From SDS–PAGE analysis, the molecular weight of the purified phytase was calculated to be 108 kDa. The phytase had an optimum pH of 5.0–5.5 and an optimum temperature of 60°C. The phytase displayed high affinity for phytate, and the K _m was 0.52 mM. The purified phytase was sufficiently able to withstand pelleting temperatures, retaining sufficiently high phytate-degrading activity.     

Cloning and expression of Bacillus phytase gene (phy) in Escherichia coli and recovery of active enzyme from the inclusion bodies

Aims: To isolate, clone and express a novel phytase gene (phy) from Bacillus sp. in Escherichia coli; to recover the active enzyme from inclusion bodies; and to characterize the recombinant phytase. Methods and Results: The molecular weight of phytase was estimated as 40 kDa on SDS-polyacrylamide gel electrophoresis. A requirement of Ca²⁺ ions was found essential both for refolding and activity of the enzyme. Bacillus phytase exhibited a specific activity of 16 U mg⁻¹ protein; it also revealed broad pH and temperature ranges of 5·0 to 8·0 and 25 to 70°C, respectively. The K_m value of phytase for hydrolysis of sodium phytate has been determined as 0·392 mmol l⁻¹. The activity of enzyme has been inhibited by EDTA. The enzyme exhibited ample thermostability upon exposure to high temperatures from 75 to 95°C. After 9 h of cultivation of transformed E. coli in the bioreactor, the cell biomass reached 26·81 g wet weight (ww) per l accounting for 4289 U enzyme activity compared with 1·978 g ww per l producing 256 U activity in shake-flask cultures. In silico analysis revealed a β-propeller structure of phytase. Conclusions: This is the first report of its kind on the purification and successful in vitro refolding of Bacillus phytase from the inclusion bodies formed in the transformed E. coli. Significance and Impact of the Study: Efficient and reproducible protocols for cloning, expression, purification and in vitro refolding of Bacillus phytase enzyme from the transformed E. coli have been developed. The novel phytase, with broad pH and temperature range, renaturation ability and substrate specificity, appears promising as an ideal feed supplement. Identification of site between 179th amino acid leucine and 180th amino acid asparagine offers scope for insertion of small peptides/domains for production of chimeric genes without altering enzyme activity.     

Aspergillus Ficuum Phytase: Partial Primary Structure,Substrate Selectivity,and Kinetic Characterization

Purified Aspergillus ficuum phytase's partial primary structure and amino acid and sugar composition were elucidated. Determination of kinetic parameters of the enzyme at different pH values and temperatures indicated no significant alteration of the Km for phytate while the K_cmt was affected. The enzyme was able to release more than 512 of the total available P₁ from phytate in a 3.0 hr assay at 58°C, but the K_cmt dropped to 15Z of the initial rate. Substrate selectivity studies revealed phytate to be the preferred substrate. The pH optima of phytase was 5.0, 4.0, and 3.0 for phytate, ATP, and polyphosphate, respectively. The enzyme had varied sensitivity towards cations. While Ca^±± and Fe^±±produced no effect on the catalytic rate of the enzyme, Cu^±, Cu^±±, Zn^±±, and Fe^±±± were found to be inhibitory. Mn^±± was observed to enhance enzyme activity by 33Z at 50 μM. Known inhibitors of acid phosphatases e. g. L (±)-tartrate, phosphomycin, and sodium fluoride had no effect on enzyme activity.     

Purification and Characterization of a Phytase from <Emphasis Type="Italic">Pseudomonas syringae</Emphasis> MOK1

A phytase (EC 3.1.3.8) from Pseudomonas syringae MOK1 was purified to apparent homogeneity in two steps employing cation and an anion exchange chromatography. The molecular weight of the purified enzyme was estimated to be 45 kDa by sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis. The optimal activity occurred at pH 5.5 and 40°C. The Michaelis constant (K _m ) and maximum reaction rate (V_max) for sodium phytate were 0.38 mM and 769 U/mg of protein, respectively. The enzyme was strongly inhibited by Cu²⁺, Cd²⁺, Mn²⁺, and ethylenediaminetetraacetic acid (EDTA). It showed a high substrate specificity for sodium phytate with little or no activity on other phosphate conjugates. The enzyme efficiently released orthophosphate from wheat bran and soybean meal.Received: 9 September 2002 / Accepted: 6 December 2002     

Purification and Characterization of Extracellular Phytase from a Marine Yeast <Emphasis Type="Italic">Kodamaea ohmeri</Emphasis> BG3

The extracellular phytase in the supernatant of cell culture of the marine yeast Kodamaea ohmeri BG3 was purified to homogeneity with a 7.2-fold increase in specific phytase activity as compared to that in the supernatant by ammonium sulfate fractionation, gel filtration chromatography (Sephadex™ G-75), and anion-exchange chromatography (DEAE Sepharose Fast Flow Anion-Exchange). According to the data from sodium dodecyl sulfate-polyacrylamide gel electrophoresis, the molecular mass of the purified enzyme was estimated to be 98.2 kDa while the molecular mass of the purified enzyme was estimated to be 92.9 kDa and the enzyme was shown to be a monomer according to the results of gel filtration chromatography. The optimal pH and temperature of the purified enzyme were 5.0 and 65°C, respectively. The enzyme was stimulated by Mn²⁺, Ca²⁺, K⁺, Li⁺, Na⁺, Ba²⁺, Mg²⁺ and Co²⁺ (at a concentrations of 5.0 mM), but it was inhibited by Cu²⁺, Hg²⁺, Fe²⁺, Fe³⁺, Ag⁺, and Zn²⁺ (at a concentration of 5.0 mM). The enzyme was also inhibited by phenylmethylsulfonyl fluoride (PMSF), iodoacetic acid (at a concentration of 1.0 mM), and phenylgloxal hydrate (at a concentration of 5.0 mM), and not inhibited by EDTA and 1,10-phenanthroline (at concentrations of 1.0 mM and 5.0 mM). The K _m, V _max, and K _cat values of the purified enzyme for phytate were 1.45 mM, 0.083 μmol/ml · min, and 0.93 s^-1, respectively.     

Purification and biochemical properties of an extracellular acid phytase produced by the Saccharomyces cerevisiae CY strain

An extracellular acid phytase was purified to homogeneity from the culture supernatant of the Saccharomyces cerevisiae CY strain by ultrafiltration, DEAE-Sepharose column chromatography, and Sephacryl S-300 gel filtration. The molecular weight of the purified enzyme was estimated to be 630 kDa by gel filtration. Removing the sugar chain by endoglycosidase H digestion revealed that the molecular mass of the protein decreased to 446 kDa by gel filtration and gave a band of 55 kDa by SDS-PAGE. The purified enzyme was most active at pH 3.6 and 40 °C and was fairly stable from pH 2.5 to 5.0. The phytase displayed broad substrate specificity and had a K_m value of 0.66 mM (sodium phytate, pH 3.6, 40 °C). The phytase activity was completely inhibited by Fe³⁺ and Hg²⁺, and strongly inhibited (maximum of 91%) by Ba²⁺, Co²⁺, Cu⁺, Cu²⁺, Fe²⁺, Mg²⁺, and Sn²⁺ at 5 mM concentrations.