Piezoelectric urea biosensor based on immobilization of urease onto nanoporous alumina membranes

The urease was immobilized onto nanoporous alumina membranes prepared by the two-step anodization method, and a novel piezoelectric urea sensing system with separated porous alumina/urease electrode has been developed through measuring the conductivity change of immobilized urease/urea reaction. The process of urease immobilization was optimized and the performance of the developed urea biosensor was evaluated. The obtained urea biosensor presented high-selectivity monitoring of urea, better reproducibility (S.D. = 0.02, n = 6), shorter response time (30 s), wider linear range (0.5 μM to 3 mM), lower detection limit (0.2 μM) and good long-term storage stability (with about 76% of the enzymatic activity retained after 30 days). The clinical analysis of the urea biosensor confirmed the feasibility of urea detection in urine samples.     

Stabilization of enzymes by multipoint attachment via reversible immobilization on phenylboronic activated supports

In this work, we have used supports activated with m-amino-phenylboronic groups to “reversibly” immobilize proteins under very mild conditions. Most of the proteins contained in a crude extract from E. coli could be immobilized on Eupergit C-250 L activated with phenylboronic and then fully desorbed from the support by using mannitol or SDS. This suggested that the immobilization of the proteins on these supports was not only via sugars interaction, but also by other interaction/s, quite unspecific, that might be playing a key role in the immobilization of the proteins. Penicillin acylase from E. coli (PGA) was also immobilized in Eupergit C activated with m-amino-phenylboronic groups. The enzyme could be fully desorbed with mannitol immediately after being immobilized on the support. However, longer incubation times of the immobilized preparation caused a reduction of protein elution from the boronate support in presence of mannitol. Moreover, these immobilized preparations showed a higher stability in the presence of organic solvents than the soluble enzyme; the stability also improved when the incubation time was increased (to a factor of 100). By desorbing the weakest bound enzyme molecules, it was possible to correlate adsorption strength with stabilization; therefore, it seems that this effect was due to the rigidification of the enzyme via multipoint attachment on the support.     

Introduction of functional groups onto polypropylene and polyethylene surfaces for immobilization of enzymes

Polypropylene and polyethylene surfaces are activated by introducing an active functional group through 1-fluoro-2 nitro-4-azidobenzene by UV irradiation. Horseradish peroxidase and glucose oxidase are immobilized onto the activated surfaces, simply by incubating the enzymes at 37 degrees C. When untreated surfaces are used, insignificant immobilization of the enzymes is observed.     

Macroporous and hydrophilic polymer resins modified with isothiocyanate groups for immobilization of enzymes

Hydrophilic and macroporous polymer resins composed of glycerylmethacrylate, styrene, and divinylbenzene were quite easily modified with isothiocyanate groups using a Friedel-Crafts reaction with 3-chloropropionyl chloride and subsequent nucleophilic reaction with KSCN. Alkaline phosphatase and trypsin could be covalently bound to the isothiocyanate-carrying polymer resins, and the immobilized enzymes obtained were sufficiently active and stable due to a covalent bonding via a spacer group between the carrier resins and the enzymes and also due to a hydrophilic environment around the enzymes. A heterogeneity of the immobilized enzyme was taken into account to interpret the thermal denaturation process of the enzyme immobilized onto the resins.     

Steady-state generation of hydrogen peroxide: kinetics and stability of alcohol oxidase immobilized on nanoporous alumina

Alcohol oxidase from Pichia pastoris was immobilized on nanoporous aluminium oxide membranes by silanization and activation by carbonyldiimidazole to create a flow-through enzyme reactor. Kinetic analysis of the hydrogen peroxide generation was carried out for a number of alcohols using a subsequent reaction with horseradish peroxidase and ABTS. The activity data for the immobilized enzyme showed a general similarity with literature data in solution, and the reactor could generate 80 mmol H₂O₂/h per litre reactor volume. Horseradish peroxidase was immobilized by the same technique to construct bienzymatic modular reactors. These were used in both single pass mode and circulating mode. Pulsed injections of methanol resulted in a linear relation between response and concentration, allowing quantitative concentration measurement. The immobilized alcohol oxidase retained 58 % of initial activity after 3 weeks of storage and repeated use.     

In situ magnetic separation and immobilization of dibenzothiophene-desulfurizing bacteria

In situ cell separation and immobilization of bacterial cells for biodesulfurization were developed by using superparamagnetic Fe₃O₄ nanoparticles (NPs). The Fe₃O₄ NPs were synthesized by coprecipitation followed by modification with ammonium oleate. The surface-modified NPs were monodispersed and the particle size was about 13 nm with 50.8 emu/g saturation magnetization. After adding the magnetic fluids to the culture broth, Rhodococcus erythropolis LSSE8-1 cells were immobilized by adsorption and then separated with an externally magnetic field. The maximum amount of cell mass adsorbed was about 530 g dry cell weight/g particles to LSSE8-1 cells. Analysis showed that the nanoparticles were strongly absorbed to the surface and coated the cells. Compared to free cells, the coated cells not only had the same desulfurizing activity but could also be easily separated from fermentation broth by magnetic force. Based on the adsorption isotherms and Zeta potential analysis, it was believed that oleate-modified Fe₃O₄ NPs adsorbed bacterial cells mainly because of the nano-size effect and hydrophobic interaction.     

A new heterobifunctional reagent for immobilization of biomolecules on glass surface

Synthesis of a new heterobifunctional reagent, [N-(2-trifluoroethanesulfonatoethyl)-N-(methyl)-triethoxysilylpropyl-3-amine] (NTMTA) is described for the immobilization of a variety of biomolecules on glass surface. Its triethoxysilyl group reacts with glass surface and trifluoroethanesulfonate ester structure reacts selectively with aminoalkyl/mercaptoalkyl function in biomolecules. The immobilization can be achieved by two ways involving two steps. The first route involves the reaction of NTMTA with glass beads followed by attachment of aminoalkyl- or mercaptoalkylated biomolecules. The second one involves the reaction of biomolecules, viz., oligonucleotides, proteins, etc., with NTMTA via their aminoalkyl or mercaptoalkyl functions to form a biomolecule conjugate, which is then reacted with glass beads (unmodified) to complete immobilization process. This has been demonstrated by successful immobilization of 5'-mercaptoalkyl- or aminoalkylated oligonucleotides and some commonly used enzymes on glass beads using NTMTA reagent.     

Reactive thin polymer films as platforms for the immobilization of biomolecules

Spin-coated thin films of poly(N-hydroxysuccinimidyl methacrylate) (PNHSMA) on oxidized silicon and gold surfaces were investigated as reactive layers for obtaining platforms for biomolecule immobilization with high molecular loading. The surface reactivity of PNHSMA films in coupling reactions with various primary amines, including amine-terminated poly(ethylene glycol) (PEG-NH2) and fluoresceinamine, was determined by Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), fluorescence microscopy, and ellipsometry measurements, respectively. The rate constants of PEG-NH2 attachment on the PNHSMA films were found to be significantly increased compared to the coupling on self-assembled monolayers (SAMs) of 11,11'-dithiobis(N-hydroxysuccinimidylundecanoate) (NHS-C10) on gold under the same conditions. More significantly, the PEG loading observed was about 3 times higher for the polymer thin films. These data indicate that the coupling reactions are not limited to the very surface of the polymer films, but proceed into the near-surface regions of the films. PNHSMA films were shown to be stable in contact with aqueous buffer; the swelling analysis, as performed by atomic force microscopy (AFM), indicated a film thickness independent swelling of approximately 2 nm. An increased loading was also observed by surface plasmon resonance for the covalent immobilization of amino-functionalized probe DNA. Hybridization of fluorescently labeled target DNA was successfully detected by fluorescence microscopy and surface plasmon resonance enhanced fluorescence spectroscopy (SPFS), thereby demonstrating that thin films of PNHSMA comprise an attractive and simple platform for the immobilization of biomolecules with high densities.     

Nanodevices for the immobilization of therapeutic enzymes

Therapeutic enzymes are one of the most promising applications of this century in the field of pharmaceutics. Biocatalyst properties can be improved by enzyme immobilization on nano-objects, thereby increasing stability and reusability and also enhancing the targeting to specific tissues and cells. Therapeutic biocatalyst–nanodevice complexes will provide new tools for the diagnosis and treatment of old and newly emerging pathologies. Among the advantages of this approach are the wide span and diverse range of possible materials and biocatalysts that promise to make the matrix–enzyme combination a unique modality for therapeutic delivery. This review focuses on the most significant techniques and nanomaterials used for enzyme immobilization such as metallic superparamagnetic, silica, and polymeric and single-enzyme nanoparticles. Finally, a review of the application of these nanodevices to different pathologies and modes of administration is presented. In short, since therapeutic enzymes constitute a highly promising alternative for treating a variety of pathologies more effectively, this review is aimed at providing the comprehensive summary needed to understand and improve this burgeoning area.     

Polyaniline grafted polyacylonitrile conductive composite fibers for reversible immobilization of enzymes: Stability and catalytic properties of invertase

Polyacylonitrile fibers (PAN) surfaces were modified with chemical polymerization of conductive polyaniline (PANI) in the presence of potassium dichromate as an oxidizing agent. The effect of aniline concentration on the grafting efficiency and on the electrical surface resistance of PAN/PANI composite fibers was investigated. The surface resistance of the conductive composite fibers in this work was found to be between 8.0 and 0.5 kΩ/cm. As the amount of grafted PANI increased on the PAN fibers the electrical resistance of composite fibers decreased. The PAN/PANI composite fibers were characterized by SEM and FTIR studies. Composite PAN/PANI fibers were used for reversible immobilization of invertase. The immobilization efficiency and the activity of the immobilized invertase (from 1.0 mg/mL invertase solution at pH 5.5) were increased with increasing PANI contents of the composite fibers. The maximum amount of immobilized enzyme onto composite fibers containing 2.0% PANI was about 76.6 mg/g. The optimum pH for the free enzyme was observed at 5.0. On the other hand, immobilized invertase yielded a broad optimum pH profile between pH 5.0 and 7.0. Immobilized invertase exhibited 83% of its original activity even after two months storage at 4 °C while the free enzyme showed only 7% of its initial activity.     

Syntheses and applications of water-soluble reactive polymers for purification and immobilization of biomolecules

Reactive polymers have been prepared by copolymeriz-ing N-isopropyl acrylamide (NIPAM) with N-acryloxy-succinimide (NASI) or glycidyl methacrylate (GMA). The amino groups of ligands could react with the residues of NASI or GMA and the polymers could be precipitated by temperature and/or salinity variation, since they contained the NIPAM residues. As a model, p-aminobenza-midine, a trypsin inhibitor, was attached to the polymers to form water-soluble macroligands, capable of selectively binding trypsin from a trypsin-chymotrypsin solution. After precipitation of the macroligand-trypsin complex, followed by dissociation, approximately 82% trypsin was isolated. The NIPAM-GMA copolymer was also reacted with immunogammaglobulin (IgG) and alkaline phosphatase (AP). It was demonstrated that the IgG bearing polymer was able to bind protein A and the whole complex was precipitable. The reactive polymer was also used for direct immobilization of AP which was active in repeated reactions.     

Studies on immobilization of lipase on alumina for hydrolysis of ricebran oil

The immobilization of lipase from Candida lipolytica on alumina by adsorption for the hydrolysis of ricebran oil is described. Some of the factors which influence the activity of immobilizate and the stability of immobilizate are discussed. About 69% of the initially added enzyme activity is found in the biocatalyst when immobilized at pH 7.2. The stability of the immobilized enzyme to different pH and temperature conditions has also been studied.List of Symbols DE Dextrose equivalent. One DE is reducing sugar equivalent to one milligram of glucose - NE Nitrogen equivalent. One NE is one milligram of nitrogen     

In situ reversible aggregation of extracellular cellobiase in the filamentous fungus Termitomyces clypeatus

Cellobiase (E.C. 3.2.1.21), is a widely exploited industrial glycosidase with a major role in biofuel industry. Its stability and shelf life are major bottlenecks in achieving a superior formulation for industry. In the filamentous fungus Termitomyces clypeatus, the enzyme is secreted in a co-aggregated form with sucrase; the separation of this co-aggregation results in substantial loss of the enzyme??s activity. The aim of the present study was to examine the mode of aggregation of the secreted cellobiase-sucrase coaggregate and its role in the stabilization of cellobiase. Transmission electron microscopy and dynamic light scattering of purified co-aggregates revealed reversible, concentration driven self-aggregation of the extracellular enzymes to form larger entities. However, the intracellular enzyme aggregates were rigid, non-interacting, and possessed a higher percentage of disulphide bonds. Circular dichroic spectra of the two coaggregates indicated no significant difference in secondary structures. Self-association increased the stability of extracellular aggregates towards heat by 1.5 fold, SDS by 4 ?? 7 fold, and chaotropic agents, by 1.5 ?? 2 fold, than the intracellular counterpart. The K_m of extracellular aggregate varied between 0.29 and 0.45 mM as a result of spontaneous aggregation and disaggregation, whereas that of intracellular aggregate was 0.22 mM irrespective of its concentration status. In situ detection of cellobiase in native PAGE revealed two activity bands of the extracellular enzyme, which indicated a minimum of two active dissociated aggregate species, as compared to a single band for the intracellular enzyme. These studies are believed to improve the understanding of aggregation of the fungal glycosidases, which remains to be a blackbox, to increase the efficacy of these enzymes.     

In situ product removal of ketoses by immobilized 3-amino phenyl boronic acid: effect of immobilization method on pH profile

The use of polymeric derivatives of phenylboronic acid (PBA) as an effective means for specific in situ product removal of ketoses from aldose-containing reaction mixtures, strongly depends on the retention of selective binding of ketoses exhibited by soluble PBA and 3-amino PBA, by their polymeric, water insoluble analogs. In this communication we demonstrate that immobilization chemistry has a strong effect on ketose preferred binding by polymeric PBA derivatives. Our results indicate that for the preparation of an effective and more specific adsorbent, 3-amino PBA should be coupled to the polymeric carrier via alkylamino chemistry and not via the commonly employed amido derivative. Immobilized alkylamino-PBA exhibited selective fructose and xylulose binding throughout glucose and xylose isomerization processes at the pH range of 7.0-8.0.     

Porous alumina beads for immobilization of lactic acid bacteria and its application for repeated-batch fermentation in soy sauce production

Porous alumina beads with controlled pores were prepared for the immobilization of lactic acid bacteria to improve soy sauce productivity, and the alumina support with the highest lactic acid productivity was used for repeated-batch fermentation. Immobilized lactic acid bacteria could be used 5 times in repeated-batch fermentation, where higher productivities were obtained than that in conventional fermentation. The lactic acid fermentation process was mathematically modeled from the material balance and the rate equation. The simulated results agreed with the experimental ones.