Acetylation of α-chitin in ionic liquids

Acetylation of α-chitin using acetic anhydride in an ionic liquid, 1-allyl-3-methylimidazolium bromide (AMIMBr), was performed. First, a mixture of chitin and AMIMBr (2% w/w) was heated at 100 °C for 24 h for dissolution. Then, acetic anhydride (5–20 equiv) was added to the solution and the mixture was heated with stirring at desired temperatures for 24 h. The product was precipitated by the addition of the reaction mixture into methanol. The IR spectrum of the product indicated the progress of acetylation. The degrees of substitution (DS), which were determined from the IR spectra, increased with increasing the amounts of acetic anhydride used for the reaction. The highest DS was 1.86, which was obtained by the reaction using 20 equiv of acetic anhydride at 100 °C. The product with this DS value was soluble in DMSO, and thus the structure of the product was further confirmed by ¹H NMR spectroscopy in DMSO-d₆. The DS value estimated by the integrated ratio of signals due to acetyl protons to a signal due to anomeric protons was in good agreement with that determined from the IR spectrum.     

Tyrosinase activity in ionic liquids

Activity of mushroom tyrosinase was studied in three ionic liquids, 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIm][PF₆]), 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIm][BF₄]) and 1-butyl-3-methylimidazolium methylsulfate ([BMIm][MeSO₄]), and was compared to that in chloroform. Kinetic parameters of the enzyme were determined and the results indicate that the enzyme in ionic liquids basically follows the same catalytic mechanism as in water, and that the ionic liquids may affect the enzyme activity by direct interacting with the enzyme and thus hindering the E–S binding due to their high hydrophilicity and polarity.     

Structural modifications of nucleosides in ionic liquids

Nucleoside chemistry represents an important research area for drug discovery, as many nucleoside analogs are prominent drugs and have been widely applied for cancer and viral chemotherapy. However, the synthesis of modified nucleosides presents a major challenge, which is further aggravated by poor solubility of these compounds in common organic solvents. Most of the currently available methods for nucleoside modification employ toxic high boiling solvents; require long reaction time and tedious workup methods. As such, there is constant effort to develop process chemistry in alternative medium to limit the use of organic solvents that are hazardous to the environment and can be deleterious to human health. One such approach is to use ionic liquids, which are ‘designer materials’ with unique and tunable physico-chemical properties. Studies have shown that methodologies using ionic liquids are highly efficient and convenient for the synthesis of nucleoside analogs, as demonstrated by the preparation of pharmaceutically important anti-viral drugs. This article summarizes recent efforts on nucleoside modification using ionic liquids.     

Green microwave-assisted synthesis of cellulose/calcium silicate nanocomposites in ionic liquids and recycled ionic liquids

Fabrication of biomass materials by a microwave-assisted method in ionic liquids allows the high value-added applications of biomass by combining three major green chemistry principles: using environmentally preferable solvents, using an environmentally friendly method, and making use of renewable biomass materials. Herein, we report a rapid and green microwave-assisted method for the synthesis of the cellulose/calcium silicate nanocomposites in ionic liquids and recycled ionic liquids. These calcium silicate nanoparticles or nanosheets as prepared were homogeneously dispersed in the cellulose matrix. The experimental results confirm that the ionic liquids can be used repeatedly. Of course, the slight differences were also observed using ionic liquids and recycled ionic liquids. Compared with other conventional methods, the rapid, green, and environmentally friendly microwave-assisted method in ionic liquids opens a new window to the high value-added applications of biomass.     

Penicillin acylase catalysis in the presence of ionic liquids

Several ionic liquids were used as reaction media for penicillin G acylase catalysis. In all the assayed ionic liquids, [bmim]PF6 proved good media for PGA-catalyzed hydrolysis. A novel [bmim]PF6/water two-phase system is provided for 6-aminopenicillanic acid (APA) production, which will be more benefical than aquous batch systems used widely in industrial production of APA.     

Biocatalysis in ionic liquids: the stereoconvergent hydrolysis of trans-β-methylstyrene oxide catalyzed by soluble epoxide hydrolase

Soluble epoxide hydrolase (sEH) was shown to catalyze hydrolysis of epoxides using the ionic liquids (ILs) [bmim][PF₆], [bmim][N(Tf)₂], and [bmim][BF₄] (where bmim=1-butyl-3-methylimidazolium, PF₆=hexafluorophosphate, N(Tf)₂=bis(trifluoromethylsulfonyl)imide, and BF₄=tetrafluoroborate) as reaction medium. Reaction rates were generally comparable with those observed in buffer solution, and when the cress enzyme was used the hydrolysis of trans-β-methylstyrene oxide gave, through a stereoconvergent process, the corresponding optically active (1S,2R)-erythro-1-phenylpropane-1,2-diol.     

Synthesis of room temperature ionic liquids from carboxymethylated chitosan

Natural oligosaccharide-derived room temperature ionic liquids (RTILs) were prepared from 1-ethyl-3-methylimidazolium hydroxide (EMIM·OH) and carboxymethylated chitosan (CM-chitosan) by acid–base neutralization reaction. These EMIM·CM-chitosan ionic liquids exhibited good ionic conductivity and thermal stability, as well as low glass transition temperature, implying their potential wide applications in direct electrochemistry, biosensors, and biocatalysis.     

Sequence-specific destabilization of azurin by tetramethylguanidinium-dipeptide ionic liquids

The thermal unfolding of the copper redox protein azurin was studied in the presence of four different dipeptide-based ionic liquids (ILs) utilizing tetramethylguanidinium as the cation. The four dipeptides have different sequences including the amino acids Ser and Asp: TMG-AspAsp, TMG-SerSer, TMG-SerAsp, and TMG-AspSer. Thermal unfolding curves generated from temperature-dependent fluorescence spectroscopy experiments showed that TMG-AspAsp and TMG-SerSer have minor destabilizing effects on the protein while TMG-AspSer and TMG-SerAsp strongly destabilize azurin. Red-shifted fluorescence signatures in the 25 °C correlate with the observed protein destabilization in the solutions with TMG-AspSer and TMG-SerAsp. These signals could correspond to interactions between the Asp residue in the dipeptide and the azurin Trp residue in the unfolded state. These results, supported by appropriate control experiments, suggest that dipeptide sequence-specific interactions lead to selective protein destabilization and motivate further studies of TMG-dipeptide ILs.     

Efficient pretreatment of lignocellulose in ionic liquids/co-solvent for enzymatic hydrolysis enhancement into fermentable sugars

Ionic liquids (ILs) have been widely used as alternative solvents for biomass pretreatment, however, efficient methods that enable economically use of ILs at large scale have not been established. In this study, a new method in which ILs and polar organic solvents (ILs/co-solvent systems) was proposed for efficient pretreatment of lignocellulosic materials. The combination use of appropriate ILs and organic co-solvents can significantly enhance the solubility of lignocellulose due to the lower viscosity of ILs/co-solvent mixture as compared to those of pure ILs while the hydrogen bond basicity was maintained. In addition, the solubility of lignocellulosic materials in ILs/co-solvent system was found to be correlated with the Kamlet-Taft solvent parameters. Moreover, the use of microwave heating also enhances the efficiency of lignocellulose pretreatment. For example, the microwave-assisted [Emim][OAc]-DMSO (1:1 volume ratio) treated-rice straw could be hydrolyzed at least 22 times faster than that of untreated-rice straw by cellulase from Trichoderma reesei. This enhancement was attributed by several factors including more efficient lignin extraction, less crystalline cellulose and lower residual ILs in treated-rice straw. The produced sugars can be effectively fermented by Pichia stipitis for ethanol production. Moreover, [Emim][OAc]-DMSO mixture could be reused at least 5 times without significantly decrease in effectiveness demonstrated that the use of ILs/co-solvent was potential alternative method for large-scale biomass pretreatment.     

Enhanced activity and stability of ionic liquid-pretreated lipase

The activity and stability of Mucor javanicus lipase pretreated with various ionic liquids (ILs) were investigated. The results show that the activity and stability of lipase pretreated with ILs were higher than those of untreated lipase for the hydrolysis reaction in an aqueous medium. The activities of lipase pretreated with ILs such as [Bmim][PF₆], [Emim][Tf₂N], [Bmim][BF₄] and [Emim][BF₄] were 1.81, 1.66, 1.56 and 1.60 times higher than that of untreated lipase, respectively. Furthermore, activities of lipase in ILs were well maintained even after 7 days of incubation in ILs at 60 °C, while untreated lipase in phosphate buffer was fully inactivated only after 12 h of incubation at the same temperature. These results suggest that pretreatment of lipase with ILs might form IL-coated lipase which causes the structural change of lipase, and thus, enhances the activity and stability of lipase in aqueous solution.     

Preparation of chitin/cellulose composite gels and films with ionic liquids

In this study, we performed preparation and characterizations of the chitin/cellulose composite gels and films using the two ionic liquids, 1-allyl-3-methylimidazolium bromide and 1-butyl-3-methylimidazolium chloride. First, chitin and cellulose were dissolved in each appropriate ionic liquid. Then, the two liquids were mixed in the desired ratios at 100 °C to give the homogeneous mixtures. The gels were obtained by standing the mixtures for 4 days. On the other hand, the films were obtained by casting the mixtures on glass plates, followed by soaking in water and drying. The obtained gels and films were characterized by XRD and TGA measurements. The mechanical properties of the gels and films were evaluated under compressive and tensile modes, respectively.     

NMR evidence for the participation of triflated ionic liquids in glycosylation reaction mechanisms

A systematic low-temperature NMR study of a glycosylation reaction was performed in the presence of different ionic liquids and acidic catalysts. The influence of the triflate anion derived from [emim][OTf] on the stereochemistry of the glycosylation products was evaluated.     

Biocomposite films prepared from ionic liquid solutions of chitosan and cellulose

Blends of chitosan and cellulose were successfully produced using 1-butyl-3-methylimidazolium acetate (BMIMAc) as solvent media. Films were prepared from the blends by manually spreading the solution on a flat surface and precipitating the polymers in a mixture of methanol and water. To prevent the shrinkage of films, most of the absorbed water was removed by freeze drying under vacuum. Films prepared from the polymeric solutions were investigated by means of FT-IR, TGA, X-ray diffraction and SEM measurements. The shifting of the bands corresponding to -NH and CO groups of chitosan (FT-IR), the absence of the diffraction peaks at 2θ = 10.7 and 14.9° (XRD), the increased E_a for thermal decomposition for all the polymeric blends (MTGA), and the presence of an apparent homogeneous structure with no phase separation of the two polymers (SEM) provide evidence for the miscibility between chitosan and cellulose in the solid state.     

Lipase-catalyzed glycerolysis in ionic liquids directed towards diglyceride synthesis

This work examined the lipase-catalyzed glycerolysis of triglycerides (TG) in a list of commercially available ionic liquids (ILs) with varied cations and anions for the purpose of developing an efficient reaction protocol for diglyceride (DG) production and to understand whether ILs could assist the reaction systems. The reaction performances (reaction rate, TG conversion and DG yield) were found to be greatly dependent on the structure and property of ILs. The reactions in [TOMA·Tf₂N] and Ammoeng 120 produced comparable yield of DG to those most efficient conventional systems but with less by-products. Temperature enhancement generally yields positive effect on the conversion of TG, which was much more significant for the ILs with high viscosity. Unusually, increasing substrate concentration in many types of ILs led to enhanced conversion and yield; whereas the increase of glycerol/TG ratio resulted in a dramatic improvement of the reactions in the ILs with strong acidic anions. This work also sorted out some promising IL candidates, namely the ILs with good DG formation selectivity and the ones being able to achieve high TG conversion, which offered possibility to design binary IL systems. Overall, this study presented the first attempt concerning evaluation and characterization of lipase-catalyzed glycerolysis of TG for DG production in IL-based systems.     

Chemoenzymatic dynamic kinetic resolution of rac-1-phenylethanol in ionic liquids and ionic liquids/supercritical carbon dioxide systems

Continuous dynamic kinetic resolution processes in different ionic liquid/supercritical carbon dioxide biphasic systems were carried out by simultaneously using both immobilized Candida antarctica lipase B (Novozym 435) and silica modified with benzenosulfonic acid (SCX) catalysts at 40°C and 10 MPa. SCX was seen to act as an efficient heterogeneous chemical catalyst for the racemization of (S)-1-phenylethanol in different ionic liquid media ([emim][NTf₂], [btma][NTf₂] and [bmim][PF₆]). Coating both chemical and enzymatic catalysts with ILs greatly improved the efficiency of the process, providing a good yield (76%) of (R)-1-phenylethyl propionate product with excellent enantioselectivity (ee = 91–98%) in continuous operation.     

Phosphonium-ammonium-based di-cationic ionic liquids as antibacterial over the ESKAPE group

Emergence of antibioresistance is currently a major threat of public health worldwide. Hence there is an urge need of finding new antibacterial material. Herein, we report a simple and eco-friendly method to synthesize homo and heterodicationic ionic liquids based on quaternary phosphonium and ammonium salt. In order to investigate the structure activity relationship (SAR) we measured the MICs of a series of 16 derivatives with structural variations (nature of cations and counter-ions, size of linker and alkyl side chains as well as structural symmetry) over a range of Gram-positive and Gram-negative bacterial strains from the ESKAPE group. Some of the tested structures exhibit high antimicrobial activities (MIC = 0.5 mg/L) and are active over a wide range of bacteria from Gram-positive to Gram-negative. Overall, these results reveal the strong potential of di-cationic derivatives as antibacterial agents and the determination of activities from structural features gives decisive information for future synthesis of such di-cationic structures for biocidal purpose.     

Polarized light-stimulated enzymatic hydrolysis of chitin and chitosan

Illumination with white linearly polarized light (WLPL) stimulated chitinase and chitosanase in their degradation of chitin and chitosan, respectively. Enzymes were illuminated at room temperature in separate vessels, then admixed in reactors containing polysaccharides. Hydrolysis of chitosan to glucosamine followed first order kinetics whereas hydrolysis of chitin to N-acetylglucosamine deviated from the first order kinetics. In both cases, an increase in the rate of hydrolysis depended on the illumination time. Efficient degradation required up to 60 min exposure of the enzyme to WLPL.     

Facile ring opening of 2,3-epoxy-steroids with aromatic amines in ionic liquids

Efficient ring opening of steroidal 2,3-epoxides with stoichiometric amount of aromatic amines has been carried out using an ionic liquid ([bmim](+)[BF(4)](-)) both as solvent and catalyst. The reactions were completely regio- and stereoselective in each case. The aminoalcohol products have chair conformations in ring A. The ionic liquid-mediated ring opening can efficiently be carried out with aliphatic amines like morpholine as well.     

The role of different anions in ionic liquids on Pseudomonas cepacia lipase catalyzed transesterification and hydrolysis

Lipase Pseudomonas cepacia (PS) catalyzed transesterification of ethyl 3-phenylpropanoate with eleven alcohols was investigated in three ionic liquids [ILs], [Bmim]BF₄, [Bmim]PF₆, and [Bmim]Tf₂N, consisting of an identical cation and different anions. The yields were higher in hydrophobic ILs [Bmim]Tf₂N (55–96%) and [Bmim]PF₆ (22–95%), than in hydrophilic [Bmim]BF₄ (0–19%). The incubation of lipase PS in hydrophobic ILs for a period of 20–300 days at room temperature resulted in an increased yield of 62–98% in [Bmim]Tf₂N and 45–98% in [Bmim]PF₆, respectively. The lipase PS-hydrophobic IL mixture was recycled five times without any decrease in the yield of the products. In another set of experiments, the hydrolytic activity of the enzyme was determined after incubation in each of the three ILs and in hexane for 20 days at room temperature. It was found to be 1.8- and 1.6-fold higher in [Bmim]Tf₂N and [Bmim]PF₆, respectively, remained unchanged in [Bmim]BF₄ and was 1.6 times lower in hexane as compared to the non-incubated enzyme.