Structural transformation of apocytochrome c induced by alternating copolymers of maleic acid and alkene

Apocytochrome c interacts with two copolymers: poly(isobutylene-alt-maleic acid) (PIMA) and poly(1-tetradecene-alt-maleic acid) (PTMA). The interaction leads to apocytochrome c, a conformational change from random coil to alpha-helical structure. The alpha-helix content is influenced by the copolymer concentration, the length of alkyl chain of the copolymers, and pH of the medium. The electrostatic attraction between the copolymer and protein is an indispensable factor for the folding of the protein at acid pH. The hydrophobic interaction is an important factor over the entire pH range, especially when both the copolymer and protein carry negative charges at alkaline pH. The electrostatic and hydrophobic attractions between the copolymer and protein exclude water molecules, promoting the formation of hydrogen bonds within the helical structure. On the other hand, the hydrogen bonds formed between the ionized carboxyl of the copolymer and the amide of the protein partly restrain the formation of hydrogen bonds within the helical structure when the copolymer concentration is higher at pH 6.5 and 10.5.     

Dielectric dispersion of actin

The dielectric dispersion of G-actin was 7 X 10(6) Hz, and the low frequency reduced dielectric increment 0.99 +/- 0.15 ml/mg. The dielectric increment of F-actin in the range 10(5) to 10(8) Hz was very low, about 0.3.     

Reversibility of structural transition of cytochrome c on interacting with and releasing from alternating copolymers of maleic Acid and alkene

The interaction of cytochrome c (cyt c) with poly(isobutylene-alt-maleic acid) (PIMA) and poly(1-tetradecene-alt-maleic acid) (PTMA) was studied using circular dichroism, absorption spectroscopy, and atomic force microscopy to investigate the electrostatic and hydrophobic influence of the copolymers on the structure of cyt c. At pH 7.4, the interaction of PIMA with cyt c can only partly disturb the integrity of the heme pocket, while PTMA has very intensive influence on the structure of cyt c. After adding 0.15 M NaCl, PIMA-cyt c complexes dissociate, and the released cyt c recovers its native structure, whereas NaCl has no significant influence on PTMA-cyt c complexes. GuHCl (0.5 M) destroys PTMA-cyt c complexes, forming GuHCl-PTMA precipitates; the cyt c released from the complexes regenerates its native structure. In comparison with electrostatic interaction, hydrophobic interaction leads to more stable polymer-cyt c complexes and more intensive influence on cyt c structure, but cyt c can recover its native state after release.     

Dielectric properties of polyelectrolytes. V. Dielectric dispersion of heavy meromyosin

Dielectric constant and dielectric loss of heavy meromyosin (HMM) were measured with varying pH. HMM showed a broader dispersion pattern than that with a single relaxation time especially on the high-frequencey side. The dielectric increment increased sharply with pH, above p^{H 6}, whereas the mean relaxation time and whole dispersion pattern were unchanged in the same region. The values of the increment and the mean relaxation time were much larger than those of usual globular proteins. The dispersion profile, pH dependence, and values of the increment are well explained by Oosawa's counterion fluctuation theory. Other mechanisms are more or less inadequate to our results. In the low pH region below the isoelectric precipitation region, both the increment and the mean relaxation time decreased; this is probably due to partial denaturation and suppression of the dissociation of carboxyl groups. An experiment on a urea-denatured sample supports this assumption. The biological significance of the pH dependence is discussed.     

Thermogelling aqueous solutions of alternating multiblock copolymers of poly(L-lactic acid) and poly(ethylene glycol)

We are reporting alternating multiblock copolymers of poly(L-lactic acid)/poly(ethylene glycol) aqueous solution (> 15 wt %) undergoing sol-gel-sol transition as the temperature increases from 20 to 60 degrees C. Micelles of the multiblock copolymers (in water) are about 20 nm in radius at low temperature. They are aggregated to a larger size as the temperature increases, which should play a critical role in the sol-to-gel transition. The transition temperature and gel window were affected by the molecular weight and composition of the multiblock copolymer. In particular, the aqueous solution of an alternating multiblock copolymer (Mn approximately 6700 daltons) prepared from poly(ethylene glycol) (Mn approximately 600 daltons) and poly(L-lactic acid) (Mn approximately 1300 daltons) showed a maximum modulus at body temperature (37 degrees C). The in situ gel forming ability of the polymer aqueous solution in vivo as well as in vitro indicates that it can be a promising injectable biomaterial.     

Gel–water relationships: Dielectric dispersion

At low frequencies, the dielectric constant of gels of agar, carboxymethyl cellulose, gelatin, mid maize starch is much higher than that of water. It decreases continuously as the frequency increases, tending to level off at about 10⁸ cps. The dielectric constant is lower the higher the concentration of polymer; it increases in the order: carboxymethyl cellulose, agar, starch, and gelatin. Results are most reasonably explained by assuming a more solid structure of water the lower the dielectric constant.     

Dielectric dispersion in aqueous solutions of oxyhaemoglobin and carboxyhaemoglobin

The relative permittivity and conductivity of aqueous solutions of oxyhaemoglobin and carboxyhaemoglobin were measured over the frequency range 150kHz-100MHz. To minimize errors of measurement the investigations were carried out with three different samples of each type of haemoglobin, independent apparatus being used in two different laboratories. The dielectric increment and relaxation time were calculated at each of several temperatures from the results. These lead to a dipole moment of 400 Debyes and an activation enthalpy of 17.6+/-1.4kJ.mol(-1), both of which were found to be independent of temperature to within experimental error over the range 3-35 degrees C. The value of the dipole moment shows that the distribution of charge throughout the haemoglobin molecule is nearly symmetrical with respect to the centre of charge. The magnitude of the activation enthalpy is similar to that of the viscosity of water, in accord with the common observation that dielectric relaxation and viscosity are related phenomena. No significant differences are found between the dielectric parameters of oxyhaemoglobin and carboxyhaemoglobin. Combining the results with those obtained from X-ray diffraction of the solid a hydration value of 0.45g of water/g of protein is suggested, subject to the limitations of the model used. Finally, the results indicate the presence of a subsidiary dispersion, which could be attributed to the above quantity of bound water having a static permittivity of about 100 and a relaxation frequency in the region 100-200MHz.     

Microorganisms oxidizing maleic acid in sewage]

The bacteria of genera Pseudomonas oxidizing maleic, fumaric, italic acids and their anhydrides in sewage of industry of maleic anhydride have been isolated from active sludge. During the autoselection a strain of P. stutzeri 832 capable to oxidize 12.5 - 25.0 g/l of maleic acid on 90 - 70% correspondingly in 3 days has been isolated. Destructive activity of isolated strain was retained after 5-year storage in lyophylized state and under vaseline oil.     

Inhibition of nucleic acid synthesis by maleic hydrazide

Maleic hydrazide (MH), which causes chromosome breakage, inhibitionof cell division and retardation of plant growth, inhibits nucleicacid synthesis in corn and pea seedling roots. DNA synthesisin corn roots is affected sooner than RNA synthesis; the lagtimes for inhibition are 4 hr and 8–12 hr respectively.MH inhibits nucleic acid synthesis in the root apices most rapidly,while it acts on the subapical portions only after a much longerdelay and sometimes not at all. Likewise, certain fractionsof RNA synthesis are inhibited preferentially (ribosomal RNA),and others are relatively unaffected (transfer RNA). Proteinsynthesis is not affected during the early stages of MH treatment;however, it too may be reduced after a long exposure. Since0.2% colchicine does not inhibit DNA synthesis in corn rootswithin 24 hr, it seems unlikely that MH inhibits DNA synthesisindirectly through an effect on cell division. Although MH mayalso interfere with solute uptake, there is evidence that itis fairly selective in its action, i.e. it does not inhibitrespiration or cell expansion in corn roots. (Received February 22, 1972; )     

Interaction of calcium ion and maleic acid copolymer

Interaction between Ca2+ ion and poly(styrene-alt-maleic acid) was studied by using a Ca2+ ion sensitive electrode. The Ca2+ activity had a peak at a degree of neutralization of 0.5 and decreased with increasing Ca(OH)2 concentration beyond it when the polymer solution was neutralized with Ca(OH)2. The decrease in the Ca2+ activity was not observed when the polymer concentration was very low. The counter ion condensation theory did not hold for this solution except in the case of an extremely dilute solution. The additivity rule for Ca2+ was confirmed for this solution. When the maleic acid copolymer was neutralized with both Ca(OH)2 and KOH, the Ca2+ activity had a peak at a degree of neutralization of 0.5 when neutralization with KOH was less than 0.3 and the Ca2+ activity decreased more drastically than that neutralized with only Ca(OH)2. The appearance of the peak of the Ca2+ activity at a degree of neutralization of 0.5 was independent of the ratio of Ca2+ concentration to polymer concentration or absolute Ca2+ concentration, but depended on the degree of ionization, i.e., linear electric charge density on the polymer because of ionization of the carboxyl groups. Interpretations of the behavior of the Ca2+ activity are discussed.     

Dielectric dispersion of a single spherical bilayer membrane in suspension

Single spherical bilayer membranes of the Pagano-Thompson type (Pagano, R. and Thompson, T.E. (1967) Biochim. Biophys. Acta 144, 666–669), formed from monooleyl phosphate and cholesterol dissolved in CHCl₃/CH₃OH/n-decane, were subjected to a fast impedance analysis of high precision. Dielectric behavior of the whole system, as monitored from outside the spherical membrane, was sensitive to changes in the membrane state from the thick colored to the thin black state. With a spherical membrane 2–3 mm in diameter formed in the sample cavity containing 0.12 ml 10 mM NaCl, the former state was characterized by a dielectric dispersion having dielectric increment (Δ?) of some 10² and characteristic frequency ($\text{?}{}_{\mathrm{<mtext>c</mtext>}}$) around 10⁶ Hz, while the latter had $\text{Δ? ? 10}{}^5\text{and}\text{?}{}_{\mathrm{<mtext>c</mtext>}}\text{? 10}{}^3\text{Hz}$. Complex plane plots for both dispersions traced semicircles, indicating that the present system may be unequivocally analyzed to yield spherical radius and membrane capacity (C_m) on the basis of a well-established dielectric theory. C_m for the thin membranes has thus been determined to be 0.54 μF · cm^?2, in excellent agreement with a separate determination on planar membranes. The applicability of the present type of spherical membranes under dielectric monitoring to the study of membrane fusion or of exocytosis is suggested.     

Immobilization of BSA, enzymes and cells of Bacillus stearothermophilus onto cellulose, polygalacturonic acid and starch based graft copolymers containing maleic anhydride

Poly(maleic anhydride styrene) graft copolymers of cellulose, pectin polygalacturonic acid salt, calcium polygalacturonate, and starch were prepared and used to immobilize proteins. The cellulose grafts coupled quite appreciable quantities of acid phosphatase, glucose oxidase, and trypsin. However, the general retention of activity was somewhat disappointing. Further investigation with acid phosphatase showed that the amount of enzyme immobilized increased as the amount of anhydride in the graft copolymer increased but no such relationship existed for the enzymic activity. The cellulose graft copolymers were hydrolyzed and it appeared that the carboxyl group aided adsorption of the enzyme. Attempts to couple acid phosphatase using CMC through the free carboxyl groups, created by hydrolysis, gave only a small increase in the extent of protein coupling. However, the unhydrolyzed system gave a useful degree of immobilization of cells of Bacillus stearothermophilus, as did a poly(maleic anhydride/styrene)-cocellulose system. Attempts to improve the activity by using grafts based on other polysaccharide supports met with mixed success. Pectin products were soluble. Polygalacturonic acid products were partially soluble and extremely high levels of enzymic activity were obtained. This was probably due in part to the hydrophilic nature of the system, which also encouraged absorption of the enzyme. Attempts were made to reduce the solubility by using the calcium pectinate salt. Immobilization of acid phosphatase and trypsin resulted in inceased protein coupling but relatively poor activities were attained. A starch based system gave similar results. Calcium polygalacturonate was used to prepare an insoluble graft copolymeric system containing acrylonitrile-comaleic anhydride. The resulting gels gave excellent coupling with acid phosphatase which had a very good retention of activity.     

D-malic acid production from maleic acid using microorganism: Screening of microorganism

Summary Some bacteria belonging to Arthrobacter, Brevibacterium, Corynebacterium, Pseudomonas, Bacillus, and Acinetobacter produced D-malic acid from maleic acid when the cells grown in a medium containing citraconic acid were reacted aerobically with maleic acid in the pH 7.0 phosphate buffer containing 0.1% sodium chloride.     

Comparison of pH-sensitive degradability of maleic acid amide derivatives

We synthesized five maleic acid amide derivatives (maleic, citraconic, cis-aconitic, 2-(2′-carboxyethyl) maleic, 1-methyl-2-(2′-carboxyethyl) maleic acid amide), and compared their degradability for the future development of pH-sensitive biomaterials with tailored kinetics of the release of drugs, the change of charge density, and the degradation of scaffolds. The degradation kinetics was highly dependent upon the substituents on the cis-double bond. Among the maleic acid amide derivatives, 2-(2′-carboxyethyl) maleic acid amide with one carboxyethyl and one hydrogen substituent showed appropriate degradability at weakly acidic pH, and the additional carboxyl group can be used as a pH-sensitive linker.