Characterization of molecular-sieve-bound inulinase

The enzyme inulinase (2,1-β-d-fructan fructanohydrolase, EC 3.2.1.7), prepared from Kluyveromyces marxianus has been immobilized using an inorganic solid support, molecular sieve 4A via the metal link method. The immobilized enzyme had around 22 units of inulinase activity per g of the support with retention of 72% of the original activity. The optimum protein to molecular sieve ratio for the maximum retention of inulinase activity was 9 mg/g molecular sieve. The properties of soluble and immobilized enzyme differed in many respects. The optimum pH of the enzyme shifted from 6 to 5 and the optimum temperature of enzyme activity changed from 50 to 55°C. K_m values were 6.7 mM for soluble enzyme and 10 mM for immobilized enzyme. The heat stability of the enzyme was improved by immobilization. Immobilized enzyme retained about 76% of the original activity after 40 days of storage at room temperature (30±2°C).     

Enzymatic detection of heavy metal ions in aqueous solution from vegetable wastes by immobilizing pumpkin (<Emphasis Type="Italic">Cucumis melo</Emphasis>) urease in calcium alginate beads

Enzyme urease is extracted from the discarded seeds of pumpkin. Urease was purified to apparent homogeneity (5.2 fold) by heat treatment at 48 ± 1°C and gel filtration through Sephadex G-200. Effect of model metal ions on the activity of the homogeneous enzyme preparation (sp. activity 353 U/mg protein, A₂₈₀/A₂₆₀ = 1.12) of soluble as well as immobilized enzyme was investigated. The soluble and immobilized urease has been used for the quantitative estimation of general water pollution with heavy metal ions like Hg²⁺, Cu²⁺, Cd²⁺, and Co²⁺. The measurements of the urease residual activity have been carried out in tris-acetate buffer after pre-incubation of model metal salt. The inhibition was found to be biphasic with an initial rapid loss of activity and remainder in slow phase of 10∼15 min. The immobilization was done in 3.5% alginate beads leading to 86% of entrapment. There was no leaching of the enzyme over a period of 15 days at 4°C. The beads were fairly stable up to 50°C and exhibited activity even at −10°C. The inhibition by these ions was non-competitive and irreversible, hence could not be restored by dialysis. Based on the values of inhibition constant Ki the heavy-metal ions were found to inhibit urease in the following order Hg²⁺ > Cu²⁺ > Cd²⁺ > Co²⁺.     

Immobilization and characterization of lipase from an indigenous Bacillus aryabhattai SE3-PB isolated from lipid-rich wastewater

Abstract

Extracellular lipase from an indigenous Bacillus aryabhattai SE3-PB was immobilized in alginate beads by entrapment method. After optimization of immobilization conditions, maximum immobilization efficiencies of 77%?±?1.53% and 75.99%?±?3.49% were recorded at optimum concentrations of 2% (w/v) sodium alginate and 0.2?M calcium chloride, respectively, for the entrapped enzyme. Biochemical properties of both free and immobilized lipase revealed no change in the optimum temperature and pH of both enzyme preparations, with maximum activity attained at 60?°C and 9.5, respectively. In comparison to free lipase, the immobilized enzyme exhibited improved stability over the studied pH range (8.5–9.5) and temperature (55–65?°C) when incubated for 3?h. Furthermore, the immobilized lipase showed enhanced enzyme-substrate affinity and higher catalytic efficiency when compared to soluble enzyme. The entrapped enzyme was also found to be more stable, retaining 61.51% and 49.44% of its original activity after being stored for 30 days at 4?°C and 25?°C, respectively. In addition, the insolubilized enzyme exhibited good reusability with 18.46% relative activity after being repeatedly used for six times. These findings suggest the efficient and sustainable use of the developed immobilized lipase for various biotechnological applications.     

Structural and biochemical properties of lichenase from <Emphasis Type="Italic">Clostridium thermocellum</Emphasis>

The recombinant enzyme lichenase of size 30 kDa was over-expressed using E. coli cells and purified by immobilized metal ion affinity chromatography (IMAC) and size exclusion chromatography. The enzyme displayed high activity towards lichenan and β-glucan. The enzyme showed no activity towards carboxymethyl cellulose, laminarin, galactomannan or glucomannan. Surprisingly, affinity-gel electrophoresis on native-PAGE showed that the enzyme binds only glucomannan and not lichenan or β-glucan or other manno-configured substrates. The enzyme was thermally stable between the temperatures 60°C and 70°C. Presence of Cu²⁺ ions at a concentration of 5 mM enhanced enzyme activity by 10% but higher concentrations of Cu²⁺ (>25 mM) showed a sharp fall in the enzyme activity. Heavy metal ions Ni²⁺, Co²⁺ and Zn²⁺ did not affect the activity of the enzyme at low concentrations (0–10 mM) but at higher concentrations (>10 mM), caused a decrease in the enzyme activity. The crystals of lichenase were produced and the 3-dimensional structure of native form of enzyme was previously solved at 1.50 Å. Lichenase displayed (β/α)₈-fold a common fold among many glycoside hydrolase families. A cleft was identified that represented the probable location of active site.     

Enzymatic Properties of Alkaline Proteinase from Aspergillus candidus

Some enzymatic properties were examined with the purified alkaline proteinase from Aspergillus candidus. The isoelectric point was determined to be 4.9 by polyacrylamide gel disc electrofocusing. The optimum pH for milk casein was around 11.0 to 11.5 at 30°C. The maximum activity was found at 47°C at pH 7.0 for 10 min. The enzyme was stable between pH 5.0 and 9.0 at 30°C and most stable at pH 6.0 at 50°C. The enzyme activity over 95% remained at 40°C, but was almost completely lost at 60°C for 10 min. Calcium ions protected the enzyme from heat denaturation to some extent. No metal ions examined showed stimulatory effect and Hg²⁺ ions inhibited the enzyme. The enzyme was also inhibited by potato inhibitor and diisopropylphosphorofluoridate, but not by metal chelating agent or sulfhydryl reagents. A. candidus alkaline proteinase exhibited immunological cross-reacting properties similar to those of alkaline proteinases of A. sojae and A. oryzae.     

Repeated batch production of agar-oligosaccharides from agarose by an amberlite IRA-900 immobilized agarase system

The production of agar-oligosaccharides from agarose by free and immobilized agarase, obtained from a Pseudomonas aeruginosa AG LSL-11 was investigated and the activity, longevity and the operational stability of immobilized enzyme was compared with that of the free enzyme. The agar hydrolyzed products of free enzyme and immobilized enzyme were neoagarobiose, neoagarotetraose and neoagarohexaose as evidenced by LC-MS analysis. The immobilization of agarase was confirmed by SEM and also by the enzymatic transformation of agarose into agaroligosaccharides. The free agarase showed maximum activity at 40°C, whereas it’s immobilized counterpart showed maximum activity at 45oC, however, the optimum pH for both systems remained unchanged (pH 8.0). The relative activities of free agarase at pH 9.0 and 10.0 were 90 and 74%, respectively, whereas, the corresponding activities of the immobilized system were determined to be 97 and 90%. The stabilities of free agarase at pH 9.0 and 10.0 were 80 and 60% respectively, but for the immobilized system the respective residual activities were estimated to be 97 and 85%. Immobilized agarase appears to be more tolerant to high temperatures in terms of its activity and stability as it is compared to that of the free enzyme which retained 74 and 50.84% of relative activity at 55 and 60°C while, free agarase retained only 40 and 16.79% of its original activity. Furthermore, the immobilized agarase could be reused in batches efficiently for eight cycles, and could be stored for 3 months at 4°C as wet beads and for more than 6 months as dry beads.     

The potential of immobilized bacterial α-amylase on coconut coir,a smart carrier for biocatalysts

Purified α-amylase from a soil bacterium Bacillus sp. SKB4 was immobilized on coconut coir, an inexpensive cellulosic fiber, with the cross-linking agent glutaraldehyde. The catalytic properties and stability of the immobilized enzyme were compared with those of its soluble form. The enzyme retained 97.2% of its activity and its catalytic properties were not drastically altered after immobilization. The pH optimum and stability of the immobilized enzyme were shifted towards the alkaline range compared to the free enzyme. The optimum temperature for enzymatic activity was 90°C in both forms of the enzyme. The soluble and immobilized enzyme retained 19% and 70% of original activity, respectively, after pre-incubation for 1 h at 90°C. Immobilized amylase was less susceptible to attack by heavy metal ions and showed higher K_m and V_max values than its free form. The bound enzyme showed significant activity and stability after 6 months of storage at 4°C. All of these characteristics make the new carrier system suitable for use in the bioprocess and food industries.     

Immobilization of Kluyveromyces marxianus cells containing inulinase activity in open pore gelatin matrix: 1. Preparation and enzymatic properties

Kluyveromyces marxianus cells with inulinase (2,1-β-d-fructan fructanohydrolase, EC 3.2.1.7) activity have been immobilized in open pore gelatin pellets with retention of > 90% of the original activity. The open pore gelatin pellets with entrapped yeast cells were obtained by selective leaching out of calcium alginate from the composite matrix, followed by crosslinking with glutaraldehyde. Enzymatic properties of the gelatin-entrapped cells were studied and compared with those of the free cells. The immobilization procedure did not alter the optimum pH of the enzymatic preparation; the optimum for both free and immobilized cells was pH 6.0. The optimum temperature of inulin hydrolysis was 10°C higher for immobilized cells. Activation energies for the reaction with the free and immobilized cells were calculated to be 6.35 and 2.26 kcal mol^?1, respectively. K_m values were 8 mM inulin for the free cells and 9.52 mM for the immobilized cells. The thermal stability of the enzyme was improved by immobilization. Free and immobilized cells showed fairly stable activities between pH 4 and 7, but free cell inulinase was more labile at pH values below 4 and above 7 compared to the immobilized form. There was no loss of enzyme activity of the immobilized cells on storage at 4°C for 30 days. Over the same period at room temperature only 6% of the original activity was lost.     

Immobilized papain on gold nanorods as heterogeneous biocatalysts

Papain, a thiol protease present in the latex of Carica papaya, is an enzyme which exhibits broad proteolytic activity, and, for this reason, it is utilized in a variety of industrial applications. Immobilization of papain on gold nanoparticles highly preserves its activity and enhances the stability, allowing the reuse of the linked enzyme many times without any significant loss of its catalytic performance. In particular, k _cat and K _M values remain substantially unchanged, while immobilized form shows a higher activity on a wider pH range retains 80 % residual activity also at 90 °C and shows higher functionality than the free form when incubated for long time (1 h) at 90 °C and at extreme pH values (3 and 12). A higher activity of immobilized papain with respect to the free form in the presence of various bivalent metal ions, known as strong inhibitors of papain, was also found. The reasons of this enhanced stability of gold nanorods immobilized papain are discussed.     

Transformation of cortisol to prednisolone by viable cells of Arthrobacter simplex covalently immobilized on cellulose granules

Arthrobacter simplex cells have been covalently immobilized to granules of microcrystallized regenerated cellulose by means of N-hydroxymethyl, N′-glucosylurea groups at pH 8.5, 18°C and cell suspension concentration of 60 mg/ml. The immobilization yield was found to exceed 100%. The maximum initial rate of Cortisol transformation to Prednisolone remained almost constant after 20-fold transformation in a nutrient medium containing 0.5% peptone at pH 8.0, 32°C and aeration with oxygen. The effect of the substrate concentration on the activity of the immobilized cells, as well as of the ratio between substrate and immobilized cells on the degree of transformation, was investigated. The immobilized cells were characterized by means of electronmicroscopic studies. Microbiological observations have shown that immobilized cells can proliferate and the free cells obtained are accumulated in the nutrient medium. The immobilized cells preserve their viability for a long time when they are stored at 4°C.     

Characterization and immobilization on nickel-chelated Sepharose of a glutamate decarboxylase A from Lactobacillus brevis BH2 and its application for production of GABA

A gene encoding glutamate decarboxylase A (GadA) from Lactobacillus brevis BH2 was expressed in a His-tagged form in Escherichia coli cells, and recombinant protein exists as a homodimer consisting of identical subunits of 53?kDa. GadA was absolutely dependent on the ammonium sulfate concentration for catalytic activity and secondary structure formation. GadA was immobilized on the metal affinity resin with an immobilization yield of 95.8%. The pH optima of the immobilized enzyme were identical with those of the free enzyme. However, the optimum temperature for immobilized enzyme was 5?°C higher than that for the free enzyme. The immobilized GadA retained its relative activity of 41% after 30 reuses of reaction within 30?days and exhibited a half-life of 19 cycles within 19?days. A packed-bed bioreactor with immobilized GadA showed a maximum yield of 97.8% GABA from 50?mM l-glutamate in a flow-through system under conditions of pH 4.0 and 55?°C.     

Highly stable laccase from repeated-batch culture of Funalia trogii ATCC 200800

The effect of temperature, pH, different inhibitors and additives on activity and stability of crude laccase obtained from repeated-batch culture of white rot fungus Funalia trogii ATCC 200800 was studied. The crude enzyme showed high activity at 55–90°C, which was maximal at 80–95°C. It was highly stable within the temperature intervals 20–50°C. The half life of the enzyme was about 2 h and 5 min at 60°C and 70°C, respectively. pH optimum of fungal laccase activity was revealed at pH 2.5. The enzyme from F. trogii ATCC 200800 was very stable between pH values of 3.0–9.0. NaN₃ and KCN were detected as the most effective potent enzyme inhibitors among different compounds tested. The fungal enzyme was highly resistant to the various metal ions, inorganic salts, and organic solvents except propanol, at least for 5 min. Because of its high stability and efficient decolorization activity, the use of the crude F. trogii ATCC 200800 laccase instead of pure enzyme form may be a considerably cheaper solution for biotechnological applications.     

Immobilization of glucansucrase for the production of gluco-oligosaccharides from Leuconostoc mesenteroides

Glucansucrase from Leuconostoc mesenteroides was immobilized in 1?% (w/v) with sodium alginate to produce oligosaccharides. Glucansucrase gave three activity bands of approx. 240, 178, and 165?kDa after periodic acid-Schiff staining with sucrose. The immobilized enzyme had 40?% activity after ten batch reactions at 30?°C and 75?% activity after a month of storage at 4?°C, which is six times more stable than the free enzyme. Immobilized enzyme was more stable at lower (3.5?4.5) and higher (6.5?7.0) pH ranges and higher temperatures (35?40?°C) compared with the free enzyme. Immobilized and free glucansucrase were employed in the acceptor reaction with maltose and each produced gluco-oligosaccharide ranging from trisaccharides to homologous pentasaccharides.     

Immobilization and characterisation of a lipase from a new source, Bacillus sp. ITP-001

A new source of lipase from Bacillus sp. ITP-001 was immobilized by physical adsorption on the polymer poly(3-hydroxybutyrate-co-hydroxyvalerate) (PHBV) in aqueous solution. The support and immobilized lipase were characterised, compared to the lyophilised lipase, with regard to the specific surface area, adsorption–desorption isotherms, pore volume (Vp) and size (dp) by nitrogen adsorption, differential scanning calorimetry, thermogravimetric analysis, chemical composition analysis, Fourier transform infrared spectroscopy and biochemical properties. The immobilized enzyme displayed a shift in optimum pH towards the acidic side with an optimum at pH 4.0, whereas the optimum pH for the free enzyme was at pH 7.0; the optimum temperature of activity was 80 and 37 °C for the free and immobilized enzyme, respectively. The inactivation rate constant for the immobilized enzyme at 37 °C was 0.0038 h^?1 and the half-life was 182.41 h. The kinetic parameters obtained for the immobilized enzyme gave a Michaelis–Menten constant (K _m) of 49.10 mM and a maximum reaction velocity (V _max) of 205.03 U/g. Furthermore, the reuse of the lipase immobilized by adsorption allowed us to observe that it could be reused for 10 successive cycles, duration of each cycle (1 h), maintaining 33 % of the initial activity.     

Purification and characterization of an extremely stable glucose isomerase from Geobacillus thermodenitrificans TH2

The D-glucose/D-xylose isomerase was purified from a thermophilic bacterium, Geobacillus thermodenitrificans TH2, by precipitating with heat shock and using Q-Sepharose ion exchange column chromatography, and then characterized. The purified enzyme had a single band having molecular weight of 49 kDa on SDS-PAGE. In the presence of D-glucose as a substrate, the optimum temperature and pH of the enzyme were found to be 80°C and 7.5, respectively. The purified xylose isomerase of G. thermodenitrificans TH2 was extremely stable at pH 7.5 after 96 h incubation at 4°C and 50°C. When the thermal stability profile was analyzed, it was determined that the purified enzyme was extremely stable during incubation periods of 4 months and 4 days at 4°C and 50°C, respectively. The K _m and V _max values of the purified xylose isomerase from G. thermodenitrificans TH2 were calculated as 32 mM and 4.68 μmol/min per mg of protein, respectively. Additionally, it was detected that some metal ions affected the enzyme activity at different ratios. The enzyme was active and stable at high temperatures and nearly neutral pHs which are desirable for the usage in the food and ethanol industry.     

Immobilized Sclerotinia sclerotiorum invertase to produce invert sugar syrup from industrial beet molasses by product

The fungus Sclerotinia sclerotiorum produces invertase activity during cultivation on many agroindustrial residues. The molasses induced invertase was purified by DEAE-cellulose chromatography. The molecular mass of the purified enzyme was estimated at 48 kDa. Optimal temperature was determined at 60 °C and thermal stability up to 65 °C. The enzyme was stable between pH 2.0 and 8.0; optimum pH was about 5.5. Apparent K_m and V_max for sucrose were estimated to be respectively 5.8 mM and 0.11 μmol/min. The invertase was activated by β-mercaptoethanol. Free enzyme exhibited 80 % of its original activity after two month’s storage at 4 °C and 50 % after 1 week at 25 °C. In order to investigate an industrial application, the enzyme was immobilized on alginate and examined for invert sugar production by molasses hydrolysis in a continuous bioreactor. The yield of immobilized invertase was about 78 % and the activity yield was 59 %. Interestingly the immobilized enzyme hydrolyzed beet molasses consuming nearly all sucrose. It retained all of its initial activity after being used for 4 cycles and about 65 % at the sixth cycle. Regarding productivity; 20 g/l of molasses by-product gave the best invert sugar production 46.21 g/day/100 g substrate related to optimal sucrose conversion of 41.6 %.     

Studies on microbial glucose isomerase: 4. Characteristics of immobilized whole-cell glucose isomerase from Streptomyces spp.

Whole-cell glucose isomerase from a Streptomyces spp. was immobilized by entrapment in gelatin matrices crosslinked with glutaraldehyde. The resultant immobilized enzyme preparation had up to 40% recovery yield of the activity and showed relatively long stabilities during storage and the isomerizing reaction. The storage half-life of the preparation was 19 months at 5°C and the half-life of the enzyme during operation was 260 days in the presence of 1 mM Co²⁺ and 80 days in the absence of the metal ion. Optimum pH and temperature were 7.5 and 70–75°C, respectively. The K_m values for glucose and fructose were 0.29 and 0.46 m, respectively, with a maximum theoretical conversion yield of 56%. The simulation results based on the reversible one-substrate enzyme kinetic model agreed well with the experimental data obtained from a batch reactor. The continuous operation of packed bed reactors demonstrated that some effects of the external film diffusion resistance were apparent at low flow rates of the substrate feed solution, whereas the internal pore diffusion resistance was negligible up to the pellet size used in this work.     

Continuous production of l-phenylalanine from acetamidocinnamic acid using co-immobilized cells of Corynebacterium sp. and Paracoccus denitrificans

In order to produce l-phenylalanine efficiently from acetamidocinnamic acid with immobilized microbial cells, a two-step enzyme reaction using the acetamidocinnamate amidohydrolase activity of Corynebacterium sp. C-23 cells and the aminotransferase activity of Paracoccus denitrificans pFPr-1 cells was investigated. It was found that the useage of co-immobilized Corynebacterium sp. and P. denitrificans cells with κ-carrageenan was superior to that of the mixture of immobilized Corynebacterium sp. cells and immobilized P. denitrificans cells. When the space velocity was 0.06 h⁻¹ at 30°C, 147 mml-phenylalanine were produced with a 98% conversion ratio from acetamidocinnamic acid. The half-life of the l-phenylalanine-forming activity of the column was calculated to be ≈ 14 days at 30°C.     

Glutathione-dependent formaldehyde dehydrogenase homolog from <Emphasis Type="Italic">Bacillus subtilis</Emphasis> strain R5 is a propanol-preferring alcohol dehydrogenase

Genome search of Bacillus subtilis revealed the presence of an open reading frame annotated as glutathione-dependent formaldehyde dehydrogenase/alcohol dehydrogenase. The open reading frame consists of 1137 nucleotides corresponding to a polypeptide of 378 amino acids. To examine whether the encoded protein is glutathione-dependent formaldehyde dehydrogenase or alcohol dehydrogenase, we cloned and characterized the gene product. Enzyme activity assays revealed that the enzyme exhibits a metal ion-dependent alcohol dehydrogenase activity but no glutathione-dependent formaldehyde dehydrogenase or aldehyde dismutase activity. Although the protein is of mesophilic origin, optimal temperature for the enzyme activity is 60°C. Thermostability analysis by circular dichroism spectroscopy revealed that the protein is stable up to 60°C. Presence or absence of metal ions in the reaction mixture did not affect the enzyme activity. However, metal ions were necessary at the time of protein production and folding. There was a marked difference in the enzyme activity and CD spectra of the proteins produced in the presence and absence of metal ions. The experimental results obtained in this study demonstrate that the enzyme is a bona-fide alcohol dehydrogenase and not a glutathionedependent formaldehyde dehydrogenase.     

Comparative biochemical characterization of soluble and chitosan immobilized β-galactosidase from Kluyveromyces lactis NRRL Y1564

An investigation was conducted on the production of β-galactosidase (β-gal) by different strains of Kluyveromyces, using lactose as a carbon source. The maximum enzymatic activity of 3.8 ± 0.2 U/mL was achieved by using Kluyveromyces lactis strain NRRL Y1564 after 28 h of fermentation at 180 rpm and 30 °C. β-gal was then immobilized onto chitosan and characterized based on its optimal operation pH and temperature, its thermal stability and its kinetic parameters (K_m and V_max) using o-nitrophenyl β-d-galactopyranoside as substrate. The optimal pH for soluble β-gal activity was found to be 6.5 while the optimal pH for immobilized β-gal activity was found to be 7.0, while the optimal operating temperatures were 50 °C and 37 °C, respectively. At 50 °C, the immobilized enzyme showed an increased thermal stability, being 8 times more stable than the soluble enzyme. The immobilized enzyme was reused for 10 cycles, showing stability since it retained more than 70% of its initial activity. The immobilized enzyme retained 100% of its initial activity when it was stored at 4 °C and pH 7.0 for 93 days. The soluble β-gal lost 9.4% of its initial activity when it was stored at the same conditions.