Nucleotide Sequence and Analysis of pBL1, a Bacteriocin-Producing Plasmid from Lactococcus lactis IPLA 972

The complete sequence of the 10.9-kbp bacteriocinogenic plasmid pBL1 from Lactococcus lactis subsp. lactis IPLA 972 has been determined. Thirteen ORFs were encountered, of which 5 were incomplete. pBL1 proved to be a narrow-host-range plasmid which replicates neither in Bacilus subtilis nor in Lactobacillus spp. The structural organization of the pBL1 replication region was highly similar to other well-known theta-replicating plasmids of lactococci, at both the untranslated (the replication origin) and the translated (repB and orfX) sequences. As in other plasmids, the product of orfX was not necessary for plasmid replication. However, it was shown to be involved in plasmid stability. Three genes organized in an operon-like structure encompassed, most likely, the bacteriocin-encoding region. Upstream of the origin of replication a nicking site (oriT) was found. This oriT sequence proved to be functional by mobilization of plasmids wearing it. One complete and several partial IS elements were identified on pBL1.     

Nucleotide sequence analysis of the lactococcal EPS plasmid pNZ4000

The complete 42180-bp nucleotide sequence of the mobilization plasmid pNZ4000, coding for exopolysaccharide (EPS) production in Lactococcus lactis, was determined. This plasmid contains a region involved in EPS biosynthesis, four functional replicons, a region containing mobilization genes, and three origin of transfer (oriT) sequences. Sequences identical to these oriT sequences were also found on two other lactococcal plasmids and a plasmid from Lactobacillus helveticus. Several complete and partial IS elements were identified on pNZ4000, including iso-ISS1, iso-IS946, and iso-IS982 sequences. Furthermore, pNZ4000 contains a gene cluster that may encode a cobalt transport system and a gene that encodes a CorA homologue which may function as a magnesium transporter.     

Sequence and analysis of pBM02, a novel RCR cryptic plasmid from Lactococcus lactis subsp cremoris P8-2-47

This paper reports the complete nucleotide sequence of the 3.85 kbp plasmid pBM02 from Lactococcus lactis subsp. cremoris P8-2-47. Analysis of the sequence predicted six ORFs larger than 25 amino acids. They all were transcribed from the same strand and organized in two functional cassettes: the replication region and a putative mobilization region. In the replication region, two ORFs specifying proteins homologous to others found in some classes of rolling circle-replicating plasmids were encountered (copG and repB). In fact, single-stranded DNA was detected as a replication intermediate of pBM02. copG and repB, together with some upstream sequences, formed part of the minimal replication unit of the plasmid. Interestingly, pBM02 shared a 212 bp stretch with plasmids of the pWV01 type, in which the whole single-strand origin of replication is included. In the mobilization region, an ORF coding for a mobilization-like protein was present, preceded by a putative oriT sequence homologous to that of plasmid pMV158. The replicon of pBM02 is of the wide-host range type, and functions in both Gram-positive and Gram-negative bacteria, including Lactobacillus casei, Lactobacillus plantarum, Bacillus subtilis, and Escherichia coli.     

Complete nucleotide sequence and structural organization of pPB1, a small Lactobacillus plantarum cryptic plasmid that originated by modular exchange

A small cryptic plasmid designated pPB1 was isolated from Lactobacillus plantarum BIFI-38 and its complete 2899 bp nucleotide sequence was determined. Sequence analysis revealed four putative open reading frames. Based on sequence analysis two modules could be identified. First, the replication module consisted of a sequence coding for a replication protein (RepB) and its corresponding target site, and two putative repressor proteins (RepA and RepC). Sequence analysis indicated the possible synthesis of an antisense RNA that might regulate RepB production. A putative lagging-strand initiation site was also found, suggesting that pPB1 replicates via a rolling circle mechanism. The second module of pPB1 consisted of a sequence coding for a putative mobilization protein and its corresponding oriT site. Since the nucleotide sequence of the replication module showed 94.5% identity to the similar region on the Leuconostoc lactis plasmid pCI411, and the nucleotide sequence of the mobilization module had 97.5% identity to L. plantarum plasmid pLB4, it is concluded that pPB1 originated by modular exchange between two such plasmids by homologous recombination. Putative recombination sites where crossover might have taken place were also identified.     

oriT-directed cloning of defined large regions from bacterial genomes: identification of the Sinorhizobium meliloti pExo megaplasmid replicator region

We have developed a procedure to directly clone large fragments from the genome of the soil bacterium Sinorhizobium meliloti. Specific regions to be cloned are first flanked by parallel copies of an origin of transfer (oriT) together with a plasmid replication origin capable of replicating large clones in Escherichia coli but not in the target organism. Supplying transfer genes in trans specifically transfers the oriT-flanked region, and in this process, site-specific recombination at the oriT sites results in a plasmid carrying the flanked region of interest that can replicate in E. coli from the inserted origin of replication (in this case, the F origin carried on a BAC cloning vector). We have used this procedure with the oriT of the plasmid RK2 to clone contiguous fragments of 50, 60, 115, 140, 240, and 200 kb from the S. meliloti pExo megaplasmid. Analysis of the 60-kb fragment allowed us to identify a 9-kb region capable of autonomous replication in the bacterium Agrobacterium tumefaciens. The nucleotide sequence of this fragment revealed a replicator region including homologs of the repA, repB, and repC genes from other Rhizobiaceae, which encode proteins involved in replication and segregation of plasmids in many organisms.     

Specificity determinants of conjugative DNA processing in the Enterococcus faecalis plasmid pCF10 and the Lactococcus lactis plasmid pRS01

The DNA-processing region of the Enterococcus faecalis pheromone-responsive plasmid pCF10 is highly similar to that of the otherwise unrelated plasmid pRS01 from Lactococcus lactis. A transfer-proficient pRS01 derivative was unable to mobilize plasmids containing the pCF10 origin of transfer, oriT. In contrast, pRS01 oriT-containing plasmids could be mobilized by pCF10 at a low frequency. Relaxases PcfG and LtrB were both capable of binding to single-stranded oriT DNAs; LtrB was highly specific for its cognate oriT, whereas PcfG could recognize both pCF10 and pRS01 oriT. However, pcfG was unable to complement an ltrB insertion mutation. Genetic analysis showed that pcfF of pCF10 and ltrF of pRS01 are also essential for plasmid transfer. Purified PcfF and LtrF possess double-stranded DNA binding activities for the inverted repeat within either oriT sequence. PcfG and LtrB were recruited into their cognate F-oriT DNA complex through direct interactions with their cognate accessory protein. PcfG also could interact with LtrF when pCF10 oriT was present. In vivo cross-complementation analysis showed that ltrF partially restored the pCF10DeltapcfF mutant transfer ability when provided in trans, whereas pcfF failed to complement an ltrF mutation. Specificity of conjugative DNA processing in these plasmids involves both DNA-protein and protein-protein interactions.     

Characterization of a region of plasmid pBL1 of Brevibacterium lactofermentum involved in replication via the rolling circle model.

The minimal region for autonomous replication of pBL1, a 4.5-kb cryptic plasmid of Brevibacterium lactofermentum ATCC 13869 that has been used to construct a variety of corynebacterium vectors, was shown to be contained on a 1.8-kb HindII-SphI DNA fragment. This region contains two open reading frames (ORFs) (ORF1 and ORF5) which are essential for pBL1 replication in B. lactofermentum. Accumulation of single-strand intermediates in some of the constructions indicates that plasmid pBL1 replicates via the rolling circle replication model; its plus strand and minus strand were identified by hybridization with two synthetic oligonucleotide probes complementary to each pBL1 strand. ORF1 seems to encode the Rep protein and showed partial homology with sequences for Rep proteins from Streptomyces plasmids which replicate via rolling circle replication such as pIJ101, pSB24, and pJV1.     

Genetic relationship among Bacillus licheniformis rolling-circle-replicating plasmids and complete nucleotide sequence of pBL63.1, an atypical replicon

The degree of biodiversity among Bacillus licheniformis plasmids and their relation to other Bacillus subtilis group plasmids has been evaluated. To attain this goal we surveyed the diversity and linkage of replication modules in a collection of 21 naturally occurring plasmids of B. licheniformis strains, isolated from different geographical areas. On the basis of rep gene sequence analysis it was possible to group the B. licheniformis plasmids rep genes in two main cluster. Comparison with known rep genes from Bacillus rolling-circle-replicating (RCR) plasmids revealed the presence in B. licheniformis plasmids of replication genes with a DNA sequence peculiar to B. licheniformis species together with rep genes with a very high sequence similarity to B. subtilis plasmids. Furthermore, the molecular organization of an atypical replicon, pBL63.1, was shown. This plasmid did not display any significant similarity with known Bacillus RCR plasmids. The complete nucleotide sequence evidenced a replication module with an unexpected similarity with Rep proteins from RCR plasmids of bacterial species phylogenetically distantly related to Bacillus. pBL63.1 represents an exception to the low-level diversity hypothesis among Bacillus RC replicons.     

The oriT region of the Agrobacterium tumefaciens Ti plasmid pTiC58 shares DNA sequence identity with the transfer origins of RSF1010 and RK2/RP4 and with T-region borders.

Ti plasmids of Agrobacterium tumefaciens are conjugal elements whose transfer is induced by certain opines secreted from crown galls. On transmissible plasmids, DNA transfer initiates within a cis-acting site, the origin of conjugal transfer, or oriT. We have localized an oriT on the A. tumefaciens plasmid pTiC58 to a region containing the conjugal transfer loci traI and traII and acc, which is the locus encoding catabolism of the two conjugal opines, agrocinopines A and B. The smallest functional oriT clone, a 65-bp BamHI-ApaI fragment in the recombinant plasmid pDCBA60-11, mapped within the traII locus. The nucleotide sequence for a 665-bp KpnI-EcoRI fragment with oriT activity was determined. DNA sequence alignments showed identities between the pTiC58 oriT and the transfer origins of RSF1010, pTF1, and RK2/RP4 and with the pTiC58 T-region borders. The RSF1010-like sequence on pTiC58 is located in the smallest active oriT clone of pTiC58, while the sequence showing identities with the oriT regions of RK2/RP4 and with T-region borders maps outside this region. Despite their sequence similarities, pTiC58 oriT clones were not mobilized by RP4; nor could vectors containing the RK2/RP4 oriT region or the oriT-mob region from RSF1010 be mobilized by pTiC58. In contrast, other Ti plasmids and a conjugally active Agrobacterium opine catabolic plasmid, pAtK84b, efficiently mobilized pTiC58 oriT clones. In addition, the RSF1010 derivative, pDSK519, was mobilized at moderate frequencies by an Agrobacterium strain harboring only the cryptic plasmid pAtC58 and at very low frequencies by an Agrobacterium host that does not contain any detectable plasmids.     

Genetic organization of plasmid R1162 DNA involved in conjugative mobilization.

DNA involved in the mobilization of broad-host-range plasmid R1162 was localized to a region of 2.7 kilobases within coordinates 3.4 to 6.1 kilobases on the R1162 map. By examining the transfer properties of plasmids containing cloned fragments of DNA from within this region, we showed that at least four trans-active products and a cis-active site (oriT) were involved in mobilization. A cloned DNA fragment of 155 base pairs was capable of providing full oriT activity. This fragment was located within 600 base pairs of DNA containing the origin of replication of R1162, and its nucleotide sequence and that of neighboring DNA were determined. Activation of oriT required R1162-encoded, trans-acting products. Deletions which resulted in the loss of one or more of these had a variable effect on transfer efficiency and indicated the presence of both essential and nonessential Mob products. Regions encoding these products flanked oriT and in one case appeared to overlap a gene essential for plasmid replication. The implications of these findings with respect to the broad host range of R1162 are discussed.     

Isolation and characterization of a new plasmid pSpnP1 from a multidrug-resistant clone of Streptococcus pneumoniae

A novel Streptococcus pneumoniae plasmid (pSpnP1; 5413bp) has been isolated from the multidrug-resistant clone Poland(23F)-16, and its complete nucleotide sequence has been determined. Sequence analysis predicted seven co-directional open reading frames and comparative analyses revealed that plasmid pSpnP1 is different to pDP1, the only previously described pneumococcal plasmid, whereas it is highly similar to pSt08, a plasmid from Streptococcus thermophilus. A double-stranded origin for replication similar to the replication origin of the pC194/pUB110 family was located upstream of the putative rep gene (orf2). It also contained a 144-bp region with over 60% identity to the single-stranded origin type A of the Streptococcus agalactiae plasmid pMV158/pLS1. Detection of single-stranded DNA by Southern blot analysis indicated that pSpnP1 replicates via a rolling circle mechanism. Interestingly, the product of orf1 has a putative Zonular occludens toxin conserved domain present in toxigenic strains of Vibrio cholerae. Real-time PCR assays revealed that this ORF was expressed. Hybridization experiments showed that the pSpnP1 replicon was unusual among other examined antibiotic-resistant pneumococcal clones, although the recombinant plasmids based on pSpnP1 were able to replicate in Bacillus subtilis and Lactococcus lactis.     

Sequence and analysis of the 60 kb conjugative, bacteriocin-producing plasmid pMRC01 from Lactococcus lactis DPC3147

The complete sequence of pMRC01, a large conjugative plasmid from Lactococcus lactis ssp. lactis DPC3147, has been determined. Using a shotgun sequencing approach, the 60 232 bp plasmid sequence was obtained by the assembly of 1056 underlying sequences (sevenfold average redundancy). Sixty-four open reading frames (ORFs) were identified. Analysis of the gene organization of pMRC01 suggests that the plasmid can be divided into three functional domains, with each approximately 20 kb region separated by insertion sequence (IS) elements. The three regions are (i) the conjugative transfer region, including a 16-gene Tra (transfer) operon; (ii) the bacteriocin production region, including an operon responsible for the synthesis of the novel bacteriocin lacticin 3147; and (iii) the phage resistance and plasmid replication region of the plasmid. The complete sequence of pMRC01 provides important information about these industrially relevant phenotypes and gives insight into the structure, function and evolution of large Gram-positive conjugative plasmids in general. The completely sequenced pMRC01 plasmid should also provide a useful framework for the design of novel plasmids to be incorporated into starter strain improvement programmes for the dairy industry.     

Molecular characterization of plasmids pS7a and pS7b from Lactococcus lactis subsp. lactis bv. diacetylactis S50 as a base for the construction of mobilizable cloning vectors

Aims:  Strain Lactococcus lactis subsp. lactis bv. diacetylactis S50 harbours five theta-replicating plasmids (pS6, pS7a, pS7b, pS80 and pS140). The aim of this study was to characterize domains involved in the replication and conjugative mobilization of the small plasmids pS7a and pS7b, which are structurally very similar.
Methods and Results:  Complete nucleotide sequences of pS7a and pS7b were determined by cloning DNA fragments of different sizes into Escherichia coli vectors. Linearized plasmids and four Eco RI fragments of the pS7a and pS7b were cloned into an origin probe vector. Constructed plasmids (pSEV10, pSK10, pISE1a and pISE1b) were able to replicate in the strain L. lactis subsp. cremoris MG1363. In addition, experiments showed that plasmids pS7a and pS7b contained oriT sequences and their conjugative transfer directly depended on the presence of pS80 in donor cells.
Conclusions:  Plasmids pS7a and pS7b contained typical lactococcal theta replication origin and repB gene that enable them to replicate in the strain L. lactis subsp. cremoris MG1363. Plasmid pS80 plays a key role in the conjugative transfer of small plasmids.
Significance and Impact of the Study:  Plasmids pS7a and pS7b-based derivatives could be valuable tools for genetic manipulation, studying processes of plasmid maintenance and horizontal gene transfer in lactococci.     

A DNA replication origin and a replication fork barrier used in vivo in the circular plasmid pKD1

As in other yeasts, ARS-containing plasmids can be maintained extrachromosomally in Kluyveromyces lactis. Although some fragments of K. lactis DNA have ARS activity in both K. lactis and Saccharomyces cerevisiae, it appears that the sequences required for ARS activity in the two yeasts are different. As an approach to a better understanding of ARS structure and function in K. lactis, we analyzed the replication of the circular plasmid pKD1. We identified a 159-bp sequence able to promote autonomous replication of pKD1 in both yeasts; this fragments contains both a sequence related to the S. cerevisiae ARS consensus sequence and a region of 53% identity to the 40-bp sequence essential for K. lactis KARS101 function. By the analysis of in vivo replication intermediates we provide the first direct evidence that DNA replication initiates at or near the K. lactis ARS element. Replication terminates at the cisacting stability locus of pKD1, which functions as a replication fork barrier (RFB) and is necessary for proper plasmid segregation. RFB activity requires the pKDI gene products that are important for plasmid segregation, suggesting a link between DNA replication termination and plasmid segregation in a eukaryotic organism.     

The origin of transfer of P307

The DNA fragment carrying the oriT region from the enterotoxin plasmid P307 was isolated and its polynucleotide sequence was determined. Using Southern hybridization assays with a synthetic oligonucleotide probe, the oriT region was identified on a 7.9-kb EcoRI fragment from P307. By ligating the fragment with the cloning vector pUC119, plasmid pAG10 was obtained. The physical map of the insert was determined and oriT was located on a 540-bp BglII/SalI fragment. After this fragment was subcloned into sequencing phages, the polynucleotide sequence was established. Part of the sequence proved to be almost identical to segments of the oriT regions of the plasmids F and R1; another neighboring region was very different among all three sequences. The polynucleotide sequence proximal to traM is highly similar to that of F but different from that of R1.     

The mobilization and origin of transfer regions of a Thiobacillus ferrooxidans plasmid: relatedness to plasmids RSF1010 and pSC101

The components for the mobilization function of a plasmid DNA during conjugation include a cis-acting sequence (the origin of transfer, oriT) and a transacting sequence coding for mobilization (Mob) proteins. By genetic and deletion analysis, we have located the mobilization region of pTF1, a cryptic plasmid previously isolated from a Thiobacillus ferrooxidans strain. Within a 2797 bse-pair sequenced region, several open reading frames (ORFs) were predicted; two of the ORFs are divergently transcribed and they encode proteins of calculated molecular masses, 42.6kD (ORF2) and 11.4kD (ORF6). Surprisingly, these protein sequences are substantially similar to two of the previously characterized mobilization proteins of the Escherichia coli IncQ plasmid, RSF1010. Moreover, the pTF1 ORF2 (now designated MobL) sequence is also found to be similar to a presumed mobilization protein of plasmid pSC101. Regions of sequence identity of plasmids pTF1, RSF1010 and pSC101 include their oriT sites. By alkaline agarose gel electrophoresis and DNA sequencing, we have established the location of the relaxation complex nick site within the oriT of pTF1. An identical nick site, which is adjacent to a characteristic 10 base-pair inverted repeat sequence, is also found for plasmid RSF1010. A recombinant plasmid containing a 42 base-pair synthetic piece of DNA encompassing the pTF1 inverted repeat and nick sequence was shown to be oriT-active.