Proteolysis of bacteriophage phi X174 prohead protein gpB by a protease located in the Escherichia coli outer membrane.

The gene B protein (gpB) of bacteriophage phi X174 is required for prohead assembly and is removed from prohead during phage maturation. Protease activity was observed in isolated prohead which specifically cleaved gpB. Cleavage of gpB produced two fragments that had apparent molecular weights of 12,300 and 3,700 on sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Amino-terminal sequencing of the fragments confirmed that they resulted from the cleavage of gpB and identified the cleavage site as an Arg-Arg at amino acids 76 to 77 of the 120-amino-acid protein. gpB-specific protease activity was observed in both phi X174-infected and uninfected Escherichia coli extracts. This protease activity was localized to the outer-membrane fraction of uninfected cells. Protease activities present in the outer membrane and in isolated prohead produced identical fragments and had the same protease inhibition profile. The gpB-specific activity in uninfected cells was induced by growth at 42 degrees C and was inhibited by the protease inhibitors, 1,10-phenanthroline, EDTA, and N-ethylmaleimide.     

A functional domain of bacteriophage lambda terminase for prohead binding

Terminase is a multifunctional protein complex involved in DNA packaging during bacteriophage lambda assembly. Terminase is made of gpNul and gpA, the products of the phage lambda Nu1 and A genes. Early during DNA packaging terminase binds to lambda DNA to form a complex called complex I. Terminase is required for the binding of proheads by complex I to form a DNA: terminase: prohead complex known as complex II. Terminase remains associated with the DNA during encapsidation. The other known role for terminase in packaging is the production of staggered nicks in the DNA thereby generating the cohesive ends. Lambdoid phage 21 has cohesive ends identical to those of lambda. The head genes of lambda and 21 show partial sequence homology and are analogous in structure, function and position. The terminases of lambda and 21 are not interchangeable. At least two actions of terminase are involved in this specificity: (1) DNA binding; (2) prohead binding. The 1 and 2 genes at the left end of the 21 chromosome were identified as coding for the 21 terminase. gp1 and gp2 are analogous to gpNu1 and gpA, respectively. We have isolated a phage, lambda-21 hybrid 33, which is the product of a crossover between lambda and 21 within the terminase genes. Lambda-21 hybrid 33 DNA and terminase have phage 21 packaging specificity, as determined by complementation and helper packaging studies. The terminase of lambda-21 hybrid 33 requires lambda proheads for packaging. We have determined the position at which the crossover between lambda DNA and 21 DNA occurred to produce the hybrid phage. Lambda-21 hybrid 33 carries the phage 21 1 gene and a hybrid phage 2/A gene. Sequencing of lambda-21 hybrid 33 DNA shows that it encodes a protein that is homologous at the carboxy terminus with the 38 amino acids of the carboxy terminus of lambda gpA; the remainder of the protein is homologous to gp2. The results of these studies define a specificity domain for prohead binding at the carboxy terminus of gpA.     

Alterations of the portal protein,gpB, of bacteriophage lambda suppress mutations in cosQ,the site required for termination of DNA packaging

The cosQ site of bacteriophage lambda is required for DNA packaging termination. Previous studies have shown that cosQ mutations can be suppressed in three ways: by a local suppressor within cosQ, an increase in the length of the lambda chromosome, and missense mutations affecting the prohead's portal protein, gpB. In the present work, revertants of a set of lethal cosQ mutants were screened for suppressors. Seven new cosQ suppressors affected gene B, which encodes the portal protein of the prohead. All seven were allele-nonspecific suppressors of cosQ mutations. Experiments with several phages having two cosQ suppressors showed that the suppression effects were additive. Furthermore, these double suppressors had minimal effects on the growth of cosQ(+) phages. These trans-acting suppressors affecting the portal protein are proposed to allow the mutant cosQ site to be more efficiently recognized, due to the slowing of the rate of translocation.     

Domains for Protein-Protein Interactions at the N and C Termini of the Large Subunit of Bacteriophage λ Terminase

The large subunit of phage lambda terminase, gpA, the gene product of the phage A gene, interacts with the small subunit, gpNul, to form functional terminase. Terminase binds to lambda DNA at cosB to form a binary complex. The terminase:DNA complex binds a prohead to form a ternary complex. Ternary complex formation involves an interaction of the prohead with gpA. The amino terminus of gpA contains a functional domain for interaction with gpNul, and the carboxy-terminal 38 amino acids of gpA contain a functional domain for prohead binding. This information about the structure of gpA was obtained through the use of hybrid phages resulting from recombination between lambda and the related phage 21. lambda and 21 encode terminases that are analogous in structural organization and have ca. 60% sequence identity. In spite of these similarities, lambda and 21 terminases differ in specificity for DNA binding, subunit assembly, and prohead binding. A lambda-21 hybrid phage produces a terminase in which one of the subunits is chimeric and had recombinant specificities. In the work reported here; a new hybrid, lambda-21 hybrid 67, is characterized. lambda-21 hybrid 67 is the result of a crossover between lambda and 21 in the large subunit genes, such that the DNA from the left chromosome end is from 21, including cosB phi 21, the 1 gene, and the first 48 codons for the 2 gene. The rest of the hybrid 67 chromosome is lambda DNA, including 593 codons of the A gene. The chimeric gp2/A of hybrid 67 binds gp1 to form functional terminase.(ABSTRACT TRUNCATED AT 250 WORDS)     

Proteolysis of bacteriophage phi X174 prohead accessory protein gpB by Escherichia coli OmpT protease is not essential for phage maturation in vivo.

To examine whether cleavage of the phi X174 prohead accessory protein, gpB, by the OmpT protease is required for phage development in vivo, a phage mutant lacking the OmpT cleavage site and an Escherichia coli C delta ompT strain were constructed. The results of burst size experiments suggest that neither the cleavage site nor the OmpT protein is required for phi X174 development.     

The terminase of bacteriophage lambda. Functional domains for cosB binding and multimer assembly

Terminase is a protein complex involved in lambda DNA packaging. The subunits of terminase, gpNul and gpA, are the products of genes Nul and A. The actions of terminase include DNA binding, prohead binding and DNA nicking. Phage 21 is a lambdoid phage that also makes a terminase, encoded by genes 1 and 2. The terminases of 21 and lambda are not interchangeable. This specificity involves two actions of terminase; DNA binding and prohead binding. In addition, the subunits of lambda terminase will not form functional multimers with the subunits of 21 terminase. lambda-21 hybrid phages can be produced as a result of recombination. We describe here lambda-21 hybrid phages that have hybrid terminase genes. The packaging specificities of the hybrids and the structure of their genes were compared in order to identify functional domains of terminase. The packaging specificities were determined in vivo by complementation tests and helper packaging experiments. Restriction enzyme site mapping and sequencing located the sites at which recombination occurred to produce the hybrid phages. lambda-21 hybrid 51 carries the lambda A gene, and a hybrid 1/Nul gene. The crossover that produced this phage occurred near the middle of the 1 and Nul genes. The amino-terminal portion of the hybrid protein is homologous to gp1 and the carboxy-terminal portion is homologous to gpNul. It binds to 21 DNA and forms functional multimers with gpA, providing evidence that the amino-terminal portion of gpNul is involved in DNA binding and the carboxy-terminal portion of gpNul is involved in the interaction with gpA. lambda-21 hybrid 54 has a hybrid 2/A gene. The amino terminus of the hybrid protein of lambda-21 hybrid 54 is homologous with gp2. This protein forms functional multimers only with gp1, providing evidence that the amino terminus of gpA is involved in the interaction with gpNul. These studies identify three functional domains of terminase.     

Expression of the alpha and beta tubulin genes of the African trypanosome in Escherichia coli

The African trypanosome, Trypanosoma brucei, contains multiple genes for both alpha- and beta-tubulins, which code for similar if not identical proteins. Studies of the structure and function of trypanosome microtubules have been limited due to the difficulties in obtaining sufficient amounts of purified tubulin. To produce large amounts of purified tubulin for studies of structure and function and to begin developing a system for producing systematic alterations of tubulin structure we have cloned and expressed the alpha- and beta-tubulin genes of T. brucei in Escherichia coli to produce the unfused proteins. Controlled high-level expression of both alpha- and beta-tubulin was achieved using a plasmid vector, pOTS, in which expression is controlled by phage lambda promoter/operator and a temperature-sensitive lambda repressor. The tubulins produced are insoluble, as has been found for many other proteins expressed to high levels in E. coli; they are readily purified to near homogeneity by chromatography on DEAE-cellulose in 7 M urea. N-terminal analysis of the purified proteins indicates that they are initiated correctly and that the N-formyl group is removed from the initiating methionine. This factor will probably prove important in the reconstitution of biologically active tubulin.     

Structure of the bacteriophage lambda cohesive end site. Genetic analysis of the site (cosN) at which nicks are introduced by terminase.

A collection of mutations affecting the site (cosN) at which the bacteriophage lambda DNA packaging enzyme, terminase, introduces nicks to generate mature lambda chromosomes has been studied. A good correlation was found for mutational effects on burst size, accumulation of unused proheads, packaging of DNA into heads and cos cutting by terminase in vitro, indicating that defective cosN cleavage by terminase is the molecular explanation for the phenotypic effects of the mutations. Although the base-pairs of cosN display partial twofold rotational symmetry, cosN was found to be asymmetric functionally. Certain mutations to the left side of the center of rotational symmetry have more pronounced phenotypic effects than rotationally symmetric mutations to the right. The cosN11G mutation has no phenotypic effects when present as a single mutation, but does affect DNA packaging and cosN cutting in the presence of the symmetrically disposed cosN2C mutation. Mutations that decrease cosN cleavage result in the accumulation of unexpanded proheads, indicating that prohead expansion depends on cosN cutting.     

Cryoelectron-microscopy image reconstruction of symmetry mismatches in bacteriophage phi29

A method has been developed for three-dimensional image reconstruction of symmetry-mismatched components in tailed phages. Although the method described here addresses the specific case where differing symmetry axes are coincident, the method is more generally applicable, for instance, to the reconstruction of images of viral particles that deviate from icosahedral symmetry. Particles are initially oriented according to their dominant symmetry, thus reducing the search space for determining the orientation of the less dominant, symmetry-mismatched component. This procedure produced an improved reconstruction of the sixfold-symmetric tail assembly that is attached to the fivefold-symmetric prolate head of phi29, demonstrating that this method is capable of detecting and reconstructing an object that included a symmetry mismatch. A reconstruction of phi29 prohead particles using the methods described here establishes that the pRNA molecule has fivefold symmetry when attached to the prohead, consistent with its proposed role as a component of the stator in the phi29 DNA packaging motor.     

Analysis of a mutation affecting the specificity domain for prohead binding of the bacteriophage lambda terminase.

Genetic studies have identified a specificity domain for prohead binding in the C-terminal 32 amino acids of gpA, the large subunit of bacteriophage lambda terminase (S. Frackman, D. A. Siegele, and M. Feiss, J. Mol. Biol. 180:283-300, 1984). In the present work, an amber mutation, Aam42, in the fifth-to-last codon of the A gene was found to be lethal in nonsuppressing hosts. The mutation, expected to generate gpA lacking the last five amino acids, caused the production of a terminase that cut cos efficiently both in vivo and in vitro but was defective in DNA packaging. lambda Aam42 lysates contained unused proheads, consistent with a defect in prohead binding. Aam42 terminase was more strongly dependent than wild-type terminase on gpFI, the catalyst of prohead binding. Like wild-type terminase, Aam42 terminase did not cut cos in vivo when prohead assembly was blocked by a mutation in one of the genes encoding the prohead.     

Synthesis of a trans-Acting Inhibitor of DNA Maturation by Prohead Mutants of Phage λ

Bacteriophage lambda with mutations in genes that control prohead assembly and other head precursors cannot mature their DNA. In this paper we present evidence that the failure of these phage mutants to mature DNA is a reflection of a mechanism that modulates terminase nicking activity during normal phage development. We have constructed plasmids that contain the lambda-cohesive end site (cos) and the genes that code for DNA terminase, the enzyme that matures DNA by cutting at cos. The DNA terminase genes are under control of a thermosensitive cI repressor. These plasmids lack most of the genes involved in prohead morphogenesis and other head precursors. However, when repression is lifted by destruction of the thermosensitive repressor, the terminase synthesized is able to cut almost 100% of the plasmids. Therefore, these plasmids can mature in the absence of proheads and other head gene products. The plasmids are also able to complement mutants of lambda deficient in terminase and DNA maturation. However, in these complementation experiments, if the phage carry mutations in prohead genes E or B, not only is phage DNA maturation blocked, but the plasmid also fails to mature. These experiments show that, in the absence of proheads, phage lambda produces a trans-acting inhibitor of maturation. The genetic determinant of this inhibitor maps in a region extending from the middle of gene B to the end of gene C. A model is proposed in which the nicking activity of DNA-bound terminase is inhibited by the trans-acting inhibitor. Prohead (and other factors) binding to this complex would release the block to allow DNA cleavage and packaging.     

Crystal structure of a Flp recombinase-Holliday junction complex: assembly of an active oligomer by helix swapping

The crystal structure of a Flp recombinase tetramer bound to a Holliday junction intermediate has been determined at 2.65 A resolution. Only one of Flp's two domains, containing the active site, is structurally related to other lambda integrase family site-specific recombinases, such as Cre. The Flp active site differs, however, in that the helix containing the nucleophilic tyrosine is domain swapped, such that it cuts its DNA target in trans. The Flp tetramer displays pseudo four-fold symmetry matching that of the square planar Holliday junction substrate. This tetramer is stabilized by additional novel trans interactions among monomers. The structure illustrates how mechanistic unity is maintained on a chemical level while allowing for substantial variation on the structural level within a family of enzymes.     

Structure and assembly of the capsid of bacteriophage P22.

Identification of the genes and proteins involved in phage P22 formation has permitted a detailed analysis of particle assembly, revealing some unexpected aspects. The polymerization of the major coat protein (gene 5 product) into an organized capsid is directed by a scaffolding protein (gene 8 product) which is absent from mature phage. The resulting capsid structure (prohead) is the precursor for DNA encapsidation. All of the scaffolding protein exits from the prohead in association with DNA packaging. These molecules then recycle, directing further rounds of prohead assembly. The structure of the prohead has been studied by electron microscopy of thin sections of phage infected cells, and by low angle X-ray scattering of concentrated particles. The results show that the prohead is a double shell structure, or a ball within a shell. The inner ball or shell is composed of the scaffolding protein while the outer shell is composed of coat protein. The conversion from prohead to mature capsid is associated with an expansion of the coat protein shell. It is possible that the scaffolding protein molecules exit through the capsid lattice. When DNA encapsidation within infected cells is blocked by mutation, scaffolding protein is trapped in proheads and cannot recycle. Under these conditions, the rate of synthesis of gp8 increases, so that normal proheads continue to form. These results suggest that free scaffolding protein negatively regulates its own further synthesis, providing a coupling between protein synthesis and protein assembly.     

The bacteriophage phi 29 head-tail connector shows 13-fold symmetry in both hexagonally packed arrays and as single particles.

The symmetry of the phi 29 head-tail connector is controversial: several studies of two-dimensional arrays of the connector have found a 12-fold symmetry, while a recent study of isolated particles has found a 13-fold symmetry. To investigate whether a polymorphism of the structure might explain these different results, electron microscopy and image analysis were used to study both isolated connectors and particles in hexagonally packed arrays. The hexagonally packed arrays have a P1 symmetry, and the connectors displayed 13 subunits both in the arrays and as isolated single particles. While we do not observe a polymorphism between connectors in two-dimensional arrays and as isolated particles, data show that the connectors can exist with either 12 or 13 subunits. A three-dimensional reconstruction of our 13-fold connector was generated by combining an averaged side-view projection with the known symmetry. The structure of rosettes of the connectors formed in the presence of phi 29 prohead RNA (pRNA) was also examined. These rosettes contain five connectors arranged about a single connector in the center, and this arrangement may reflect an essential role of the pRNA in mediating a symmetry mismatch between either a 12- or 13-fold symmetric connector and a putative fivefold symmetric prohead portal vertex into which the connector fits.     

The purification and properties of the scaffolding protein of bacteriophage lambda.

The Nu3 gene of bacteriophage lambda resides within a cluster of genes that specify structural components of the bacteriophage head. Previous experiments indicate that the Nu3 gene product (gpNu3) is associated with immature proheads but is not detectable in mature proheads or bacteriophage particles, hence its classification as a scaffolding protein. The Nu3 gene has been cloned and overexpressed, and its protein product has been purified. The purified protein is biologically active, as demonstrated by its ability to complement a gpNu3-deficient extract in an in vitro assembly reaction. The sequence of the amino terminus of the protein indicates that translation of Nu3 starts at nucleotide position 5,342 on the standard lambda DNA sequence, yielding a protein with a calculated Mr of 13,396. A combination of gel exclusion chromatography and velocity sedimentation gradient data indicates that gpNu3 possesses an unusually elongated shape.     

Initial cos cleavage of bacteriophage lambda concatemers requires proheads and gpFI in vivo

The development of bacteriophage lambda and double-stranded DNA viruses in general involves the convergence of two separate pathways: DNA replication and head assembly. Clearly, packaging will proceed only if an empty capsid shell, the prohead, is present to receive the DNA, but genetic evidence suggests that proheads play another role in the packaging process. For example, lambda phages with an amber mutation in any head gene or in FI, the gene encoding the accessory packaging protein gpFI, are able to produce normal amounts of DNA concatemers but they are not cut, or matured, into unit length chromosomes for packaging. Similar observations have been made for herpes simplex 1 virus. In the case of lambda, a negative model proposes that in the amber phages, unassembled capsid components are inhibitory to maturation, and a positive model suggests that assembled proheads are required for cutting. We tested the negative model by using a deletion mutant devoid of all prohead genes and FI in an in vivo cos cleavage assay; in this deleted phage, the cohesive ends were not cut. When lambda proheads and gpFI were provided in vivo via a second prophage, cutting was restored, and gpFI was required, results that support the positive model. Phage 21 is a sister phage of lambda, and although its capsid proteins share approximately 60% residue identity with lambda's, phage 21 proheads did not restore cutting, even when provided with the accessory protein gpFI. Models for the role of proheads and gpFI in cos cutting are discussed.     

Determinants of bacteriophage phi29 head morphology

Bacteriophage phi29 requires scaffolding protein to assemble the 450 x 540 A prolate prohead with T = 3 symmetry end caps. In infections with a temperature-sensitive mutant scaffolding protein, capsids assemble predominantly into 370 A diameter isometric particles with T = 3 symmetry that lack a head-tail connector. However, a few larger, 430 A diameter, particles are also assembled. Cryo-electron microscopy shows that these larger particles are icosahedral with T = 4 symmetry. The prolate prohead, as well as the two isometric capsids with T = 3 and T = 4 symmetry, are composed of similar pentamers and differently skewed hexamers. The skewing of the hexamers in the equatorial region of proheads and in the T = 4 isometric particles reflects their different environments. One of the functions of the scaffolding protein, present in the prohead, may be to stabilize skewed hexamers during assembly.     

Membrane-associated assembly of a phage T4 DNA entrance vertex structure studied with expression vectors

The DNA entrance vertex of the phage head is critical for prohead assembly and DNA packaging. A single structural protein comprises this dodecameric ring substructure of the prohead. Assembly of the phage T4 prohead occurs on the cytoplasmic membrane through a specific attachment at or near the gp20 DNA entrance vertex. An auxiliary head assembly gene product, gp40, was hypothesized to be involved in assembling the gp20 substructure. T4 genes 20, 40 and 20 + 40 were cloned into expression vectors under lambda pL promoter control. The corresponding T4 gene products were synthesized in high yield and were active as judged by their ability to complement the corresponding infecting T4 mutants in vivo. The cloned T4 gene 20 and gene 40 products were inserted into the cytoplasmic membrane as integral membrane proteins; however, gp20 was inserted into the membrane only when gp40 was also synthesized, whereas gp40 was inserted in the presence or absence of gp20. The gp20 insertion required a membrane potential, was not dependent upon the Escherichia coli groE gene, and assumed a defined membrane-spanning conformation, as judged by specific protease fragments protected by the membrane. The inserted gp20 structure could be probed by antibody binding and protein A-gold immunoelectron microscopy. The data suggest that a specific gp20-gp40-membrane insertion structure constitutes the T4 prohead assembly initiation complex.     

Isolation and reassembly of bacteriophage T4 core proteins

The products of genes 22, 67 and 68, and the internal proteins IPI, IPII and IPIII, as components of the scaffolding core of the bacteriophage T4 prohead, have been isolated and purified by hydroxylapatite column chromatography. Under conditions promoting reassembly in vitro, the proteins associated into elongated particles of practically constant width but variable length that we have called polycores. Preliminary optical diffraction experiments indicate that polycores may have an ordered structure, possibly helical, as has been suggested for the polyhead core. The coassembly of core proteins and the purified shell protein gp23 results in the formation of core-containing polyheads. Occasionally, prolate core-like particles have been observed but their reproducible formation has not been attained. Attempts to investigate the role of the minor prohead component gp20 in core assembly have been made through the cloning of the corresponding gene in an expression vector and subsequent purification of the protein.