Investigations of the structural function of the J chain in human immunoglobulin M

Human IgM molecules were treated with Na(2)SO(3) or mercaptoethylamine in concentrations ranging from 2 to 14mm or 2 to 22mm respectively. The dissociation of IgM to IgM(s) varied from 0% to 100%. At the intermediate concentrations of either reagent the amount of freed J chains was less than expected. In an attempt to find an explanation for this, IgM was partially dissociated to IgM(s) with mercaptoethylamine. The IgM(s) isolated by gel filtration was divided according to the ascending and descending portions of the elution curve. These portions were treated with 24mm-mercaptoethylamine and analysed for the presence of J chains. Only the ascending portion contained free J chains. Thus, after mild reduction where not all the IgM molecules are dissociated to IgM(s), some J chains remain covalently attached to some IgM(s) molecules although most of the J chains are freed. It was concluded that the J chain could serve as a ;hitch' for IgM(s) molecules forming intact IgM.     

The molecular weight of J chains derived from human immunoglobulin M

J chain was isolated from sulphonated human immunoglobulin M molecules by electrophoresis on polyacrylamide gels. When determined by electrophoresis in sodium dodecyl sulphate-polyacrylamide gels, the molecular weight of the protein was about 27000. After suspension in 5m-guanidine hydrochloride solution for 21 days, two groups of three bands appeared on the gels. Most of the protein dissociated to components of molecular weight 15000. The molecular weight of purified J chain was also determined by ultracentrifugation. In borate-saline solution the average weight-average molecular weight was about 29000. The molecular weight slowly decreased upon prolonged exposure to guanidine hydrochloride, and after 14 days the minimum molecular weight was about 15000. Some association between chains still existed. These data suggest that J chain derived from the paraprotein exists in borate-saline solution as dimers held by strong non-covalent forces.     

Disulfide bond assignment in human J chain and its covalent pairing with immunoglobulin M.

The assignment of disulfide bonds in human J chain and its covalent pairing with immunoglobulin M was determined under conditions which minimize disulfide bond interchange. We show that in J chain the three intradisulfide bridges are formed between Cys 12 and 100, Cys 71 and 91, and Cys 108 and 133. Previous reports [reviewed by Koshland, M. E. (1985) Annu. Rev. Immunol. 3, 425-453] have proposed that cysteines 12, 14, or 68 were linked to the penultimate cysteine 575 of two mu chain tails. In this work, we demonstrate that cysteines 14 and 68 are disulfide-bridged to mu chains. A revised, albeit putative, model of J chain folding is presented which takes into account the correct disulfide pairing and the predictive secondary structure assignment.     

Polymeric immunoglobulin M is secreted by transfectants of non-lymphoid cells in the absence of immunoglobulin J chain.

Plasmids were constructed in which expression of genes encoding the heavy and light chains of a hapten-specific IgM antibody is under control of a heat shock promoter. Glioma, phaeochromocytoma and other non-lymphoid cell lines transfected with the plasmids were able to process and secrete immunoglobulin following heat induction. The glioma transfectants were studied in detail and were shown to secrete polymeric IgM in a yield similar to that obtained with a plasmacytoma. However, the glioma IgM was not associated with J chain and was largely composed of pentamers and hexamers. Thus, neither J chain nor other lymphoid-specific proteins are required for assembly and secretion of polymeric IgM although the absence of J chain may encourage hexamer formation.     

Selective proteolysis of the J chain component in human polymeric immunoglobulin.

To clarify the losses that have been observed in the J chain portion of human IgM and IgA, were carried out studies on the enzymatic susceptibility of the J polypeptide. When Waldenstr?m macroglobulins and myeloma IgA polymers were subjected to limited proteolysis with various endopeptidases, only subtilisin was found to attack the J chain component. The pattern of cleavage was a function of the polymer species. The J chain in IgM was highly susceptible to digestion, quantitative cleavage being achieved at very low enzyme to IgM ratios and without significant changes in the remaining pentamer structure. Analyses of the digestion products showed that the initial cleavage occurred at an exposed region midway in the J sequence and was followed by extensive degradation of the carboxy-terminal segment. These findings indicated that the observed loss of the IgM J component can be explained by the inadvertent introduction of subtilisin in vitro or by the attack of in vivo enzymes with a specificity similar to subtilisin. In contrast, the IgA J chain was found to be much more resistant to subtilisin proteolysis; its cleavage required higher enzyme concentrations and was accompanied by significant degradation of the alpha-chains. Thus, it appears unlikely that the IgA J polypeptide is degraded by either in vitro or in vivo enzymes unless its accessibility is first enhanced by changes in the IgA Fc structure.     

Biosynthesis of immunoglobulin A (IgA) and immunoglobulin M (IgM). Control of polymerization by J chain

Cell suspensions of mouse plasma-cell tumours secreting IgA (immunoglobulin A) and IgM (immunoglobulin M) were incubated with radioactive leucine for various periods of time. The secreted immunoglobulins were precipitated from the culture medium with specific rabbit antisera to determine the relative distribution of radioactivity among the different molecular species, and to estimate the fraction of total radioactivity in the J chain. For IgM-secreting cells there is a balanced synthesis of 7S subunits and J chains, and the secreted product is uniformly assembled to the pentamer. In cells secreting IgA, however, the results demonstrate that the pool of intracellular J chain is less than the intracellular IgA pool. The concentration of J chain is therefore limiting and is less than the requirement for complete polymerization. The major factor that determines whether an intracellular monomer is secreted as such or is polymerized with the addition of J chain is therefore the amount of intracellular J chain. When this is limiting, as it is in cells secreting IgA, then monomer will be secreted.     

The requirement of light chain for the surface deposition of the heavy chain of immunoglobulin M

The murine tumor line 70Z/3 resembles a pre-B lymphocyte in containing the heavy chain of IgM (mu) as a cytoplasmic protein in the apparent absence of light chain (L). However, these cells can be induced by lipopolysaccharide to differentiate into a B lymphocyte-like state, containing mu2L2 tetramers as membrane-bound molecules. This is a accompanied by an increase in mu synthesis, the acquisition of complex carbohydrate by mu, and the induction of L chain. We wished to determine which of these events is critical for membrane deposition of mu. We found that uninduced 70Z/3 cells, as well as lipopolysaccharide-uninducible variants, contained a low, constitutive level of membrane bound mu, all of which was found as mu2L2. Dextran sulfate, another inducing agent, apparently caused a redistribution of this pre-existing surface mu without altering the pattern of mu synthesis or processing. One lipopolysaccharide-uninducible variant showed a small subset of surface mu-positive cells, and the proportion of these cells increased with a prolonged induction period. The increase in mu synthesis was nearly normal, but mu did not acquire complex carbohydrate. However, the delayed appearance of surface mu-positive cells was paralleled by a delayed increase in L chain, which occurred only in those cells with mu on their membrane. We concluded that L chain signals the transport of mu to the cell surface.     

Polymerization of human immunoglobulin M.

The repolymerization of human IgM following mild reductive cleavage was studied as a model for intracellular polymer assembly. Repolymerization was found to require the presence of J chain and a disulfide exchanging system which could be furnished either intrinsically by the use of the monofunctional thiol mercaptoethylamine or extrinsically by the inclusion of a protein-mercaptan mixed disulfide, and/or a disulfide exchanging enzyme. The degree of repolymerization was dependent on the extent of monomer reduction and the product covalently incorporated one J chain per five monomer units. Disulfide exchanging enzyme probably served as a source of mixed disulfides rather than as an enzymatic catalyst of the reaction. These results are discussed in terms of a tentative mechanism for IgM polymerization.     

The effects of branched chain fatty acid incorporation into Neurospora crassa membranes

Phytanic acid (3,7,11,15-tetramethylhexadecanoic acid), an unusual branched chain fatty acid thought to disrupt the hydrophobic regions of membranes, can be incorporated into the lipids of growing Neurospora cultures. The phytanic acid must be supplied in a water soluble form, esterified to a Tween detergent (Tween-Phytanic). This fatty acid and its oxidation product, pristanic acid, were found in both the phospholipid and neutral lipid fractions of Neurospora. In phospholipids of the wild-type strain, phytanic acid was present to the extent of 4 to 5 moles percent of the fatty acids and pristanic acid, about 41 moles percent. The neutral lipids contained 42 and 4 moles percent of phytanic and pristanic acids respectively. By employing a fatty acid-requiring mutant strain (cel^?), the phytanic acid level was raised to a maximum of 16 moles percent in the phospholipids and to 63 moles percent in the neutral lipids. Under this condition, the level of pristanic acid was reduced to about 6 moles percent in phospholipids and 1 mole percent in the neutral lipids. The phytanic acid levels could not be further elevated by increased supplementation with phytanic acid or by a change in the growth temperature. In strains with a high phytanic acid content, the complete fatty acid distribution of the phospholipids and neutral lipids was determined. In the neutral lipids, phytanic acid appeared to replace the 18 carbon fatty acids, particularly linoleic acid. The presence of phytanic acid in the phospholipids was confirmed by mass spectrometry, and by the isolation of a phospholipid fraction containing this fatty acid via silicic acid column chromatography. Most of the phytanic acid in phospholipids appeared to be in phosphatidylethanolamine, and 2 lines of evidence suggest that it was esterified to both positions of this molecule. In the fatty acid-requiring mutant strain (cel^?), the replacement by phytanic acid of 10 to 15% of the fatty acids in the phospholipid produced an aberrant morphological change in the growth pattern of Neurospora and caused this organism to be osmotically more fragile than the wild-type strain. The lack of noticeable effect of the high levels of pristanic acid in the phospholipids suggests that it is not just the presence of the methyl groups in a branched chain fatty acid which leads to the altered membrane function in this organism.     

The amino acid sequence of rabbit J chain in secretory immunoglobulin A.

The primary structure of rabbit J chain, which occurs covalently bound to secretory IgA, was determined. J chain was isolated in its S-carboxymethylated form, in one step, by SDS/PAGE followed by electro-elution; 5 nmol of protein (approx. 75 micrograms), in all, was necessary for the determination of the complete sequence by the 'shot-gun' microsquencing technique; with the use of several site-specific endoproteinases, the various digests of S-carboxymethylated J chain were separated by micro-bore reverse-phase h.p.l.c. and the partial N-terminal sequences of all peptides were analysed. From the sequence alignment, gaps were filled by further extensive sequencing of the relevant overlapping fragments isolated from selected digests. Rabbit J chain comprises 136 amino acid residues, out of which eight are conserved cysteine residues, and is more closely similar to the human sequence (73.5% identify) than to the mouse sequence (68% identity). There is one unique glycosylation site at asparagine-48.     

Biosynthesis of immunoglobulin A (IgA) and immunoglobulin M (IgM). Requirement for J chain and a disulphide-exchanging enzyme for polymerization

Mouse myeloma cells secreting 19S IgM (immunoglobulin M) (MOPC 104E and TEPC 183) or monomer and polymer IgA (immunoglobulin A) (MOPC 315) were incubated with radioactive leucine and the intracellular and secreted immunoglobulins and immunoglobulin subunits were prepared by preparative sucrose-density-gradient centrifugation. Samples were reduced in the presence or absence of isolated J chain, passed over Sephadex G-25 and then incubated at 37 degrees C for 30min with or without a source of disulphide-interchange enzyme. The extent of reassembly of reduced subunits was then evaluated by electrophoresis in polyacrylamide gels. Provided that J chain and the disulphide-interchange enzyme were supplied, both IgM and IgA could be assembled from their respective subunits, obtained by reductive cleavage of polymeric forms. Under similar conditions, assembly of polymeric forms from intracellular or secreted 7S monomer subunits also occurred. Under these conditions polymerization was total, there being no residue of the monomeric form. Reassembly did not occur in the absence of either J chain or the enzyme. All of the J chain released from IgM by reductive cleavage was incorporated back into the reassembled polymer. The J chain is therefore likely to be an essential structural requirement for polymeric immunoglobulins. A variety of controls ruled out non-specific interactions, and further suggested that the amino acid sequence of polypeptide chains determines the specificity of polymerization. The fact that intracellular IgA and IgM monomer subunits known to be deficient in galactose and fucose can be completely polymerized suggests that the addition of carbohydrate does not control polymerization.     

Cell-adhesive immunoglobulin M in human plasma

Human plasma contains a cell-adhesive protein that has a structure related to immunoglobulins. This protein was purified by affinity chromatography on an elastin-Sepharose column and by Mono Q anion-exchange chromatography. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis under non-reducing and reducing conditions revealed that this protein is a kind of immunoglobulin M (IgM). Antibodies against the mu chain and against the Fc region of IgM inhibited the adhesion of cells to this protein. Addition of the peptide GRGDS into media inhibited the adhesion, too. These results suggest that this protein is a special subset of IgM having a cell-binding sequence in the Fc region. We propose the name "cell-adhesive immunoglobulin M (CA-IgM)" for this protein. CA-IgM binds to alpha-elastin and laminin suggesting that it may play a role in the interaction between cells and the extracellular matrix.     

Mechanisms of copper incorporation into human ceruloplasmin

Ceruloplasmin is a multicopper oxidase essential for normal iron homeostasis. To elucidate the mechanisms of copper incorporation into this protein, holoceruloplasmin biosynthesis was examined by immunoblot analysis and (64)Cu metabolic labeling of Chinese hamster ovary cells transfected with cDNAs encoding wild-type or mutant ceruloplasmin. This analysis reveals that the incorporation of copper into newly synthesized apoceruloplasmin in vivo results in a detectable conformational change in the protein. Strikingly, despite the unique functional role of each copper site within ceruloplasmin, metabolic studies indicate that achieving this final conformation-driven state requires the occupation of all six copper-binding sites with no apparent hierarchy for copper incorporation at any given site. Consistent with these findings a missense mutation (G631R), resulting in aceruloplasminemia and predicted to alter the interactions at a single type I copper-binding site, results in the synthesis and secretion only of apoceruloplasmin. Analysis of copper incorporation into apoceruloplasmin in vitro reveals that this process is cooperative and that the failure of copper incorporation into copper-binding site mutants observed in vivo is intrinsic to the mutant proteins. These findings reveal a precise and sensitive mechanism for the formation of holoceruloplasmin under the limiting conditions of copper availability within the cell that may be generally applicable to the biosynthesis of cuproproteins within the secretory pathway.     

Evolution of human immunoglobulin kappa J region genes

Immunoglobulin kappa chain variable region genes are assembled from two discontinuous DNA segments, a V and a J gene. The J region genes, in addition to encoding amino acid positions 96-108 of the kappa polypeptide chain, also provide sequences required for both DNA and RNA splicing reactions. For purposes of evolutionary comparison and to establish the complexity of the kappa J region locus in man, we have determined an approximately 3000 basepair nucleotide sequence in a cloned human DNA fragment that encodes the germline distinct J region segments. Significant blocks of homology have been tightly maintained between this region and an analogous segment of the mouse genome. In particular, the short sequences, GGTTTTTGT and CACTGTG, thought to be involved in V-J recombination, are the most highly conserved regions (97% homology). In addition, from heteroduplex data and computer analysis of the nucleotide sequences, it is clear that the mouse J3 sequence, a pseudogene, is not present in the human cluster. This can be explained by a duplication event in the mouse J region gene cluster that may have been the result of unequal crossing over between homologous chromosomes.     

The physical organization of the human immunoglobulin heavy chain gene complex.

Two dimensional DNA electrophoresis (2D-DE) was used to map the variable (VH) region of the human heavy chain immunoglobulin gene cluster. Seventy-six VH gene segments were mapped to specific SfiI, BssHI and NotI fragments by 2D-DE. We have determined that a common insertion/deletion polymorphism of 80 kb, involving three VH gene segments, occurs in the VH region. The physical map suggests that the evolution of the human IGH gene complex involved duplication of blocks containing different VH families. This physical map will allow comparison of the usage of VH loci in human ontogeny with their proximity to the CH region. Knowledge of the germline repertoire of a particular DNA source studied in essential as the number of the dispersed VH gene segments of VH families, especially of the VH5 family, is variable. 2D-DE, as illustrated here for the IGH gene cluster, has general application in the development of large scale physical maps of gene and repeat families.     

Structural requirements for polymeric immunoglobulin assembly and association with J chain

Both IgM and IgA exist as polymeric immunoglobulins. IgM is assembled into pentamers with J chain and hexamers lacking J chain. In contrast, polymeric IgA exists mostly as dimers with J chain. Both IgM and IgA possess an 18-amino acid extension of the C terminus (the tail-piece (tp)) that participates in polymerization through a penultimate cysteine residue. The IgM (mutp) and IgA (alphatp) tail-pieces differ at seven amino acid positions. However, the tail-pieces by themselves do not determine the extent of polymerization. We now show that the restriction of polymerization to dimers requires both C(alpha)3 and alphatp and that more efficient dimer assembly occurs when C(alpha)2 is also present; the dimers contain J chain. Formation of pentamers containing J chain requires C(mu)3, C(mu)4, and the mutp. IgM-alphatp is present mainly as hexamers lacking J chain, and mumugammamu-utp forms tetramers and hexamers lacking J chain, whereas IgA-mutp is present as high order polymers containing J chain. In addition, there is heterogeneous processing of the N-linked carbohydrate on IgA-mutp, with some remaining in the high mannose state. These data suggest that in addition to the tail-piece, structural motifs in the constant region domains are critical for polymer assembly and J chain incorporation.