Formulation of Ketotifen Fumarate Fast-Melt Granulation Sublingual Tablet

The purpose of this study was to prepare sublingual tablets, containing the antiasthmatic drug ketotifen fumarate which suffers an extensive first-pass effect, using the fast-melt granulation technique. The powder mixtures containing the drug were agglomerated using a blend of polyethylene glycol 400 and 6000 as meltable hydrophilic binders. Granular mannitol or granular mannitol/sucrose mixture were used as fillers. A mechanical mixer was used to prepare the granules at 40°C. The method involved no water or organic solvents, which are used in conventional granulation, and hence no drying step was included, which saved time. Twelve formulations were prepared and characterized using official and non official tests. Three formulations showed the best results and were subjected to an ex vivo permeation study using excised chicken cheek pouches. The formulation F4I possessed the highest permeation coefficient due to the presence of the permeation enhancer (polyethylene glycol) in an amount which allowed maximum drug permeation, and was subjected to a pharmacokinetic study using rabbits as an animal model. The bioavailability of F4I was significantly higher than that of a commercially available dosage form (Zaditen® solution-Novartis Pharma-Egypt) (p > 0.05). Thus, fast-melt granulation allowed for rapid tablet disintegration and an enhanced permeation of the drug through the sublingual mucosa, resulting in increased bioavailabililty.Key words: chicken pouches, fast-melt granulation, ketotifen fumarate, permeation, sublingual tablet, Zaditen®     

Drying Using Supercritical Fluid Technology as a Potential Method for Preparation of Chitosan Aerogel Microparticles

Supercritical fluid technology offers several advantages in preparation of microparticles. These include uniformity in particle size, morphology, and drug distribution without degradation of the product. One of the recent advantages is preparation of porous aerogel carrier with proper aerodynamic properties. In this study, we aimed to prepare chitosan aerogel microparticles using supercritical fluid (SCF) technology and compare that with microparticles produced by freeze drying (FD). Loading the prepared carriers with a model drug (salbutamol) was also performed. Comparisons of the particle properties and physicochemical characterizations were undertaken by evaluating particle size, density, specific surface area, and porosity. In vitro drug release studies were also investigated. The effect of many variables, such as molecular weight of chitosan oligomers, concentrations of chitosan, and concentrations of tripolyphosphate on the release, were also investigated. Chitosan aerogels were efficiently produced by SCF technology with an average particle size of 10 μm with a tapped density values around 0.12 g/mL, specific surface area (73–103) m²/g, and porosity (0.20–0.29) cc/g. Whereas, microparticles produced by FD method were characterized as cryogels with larger particle size (64 microns) with clear cracking at the surface. Sustained release profile was achieved for all prepared microparticles of salbutamol produced by the aforementioned methods as compared with pure drug. The results also demonstrates that chitosan molecular weight, polymer concentration, and tripolyphosphate concentration affected the release profile of salbutamol from the prepared microparticles. In conclusion, SCF technology was able to produce chitosan aerogel microparticles loaded with salbutamol that could be suitable for pulmonary drug delivery system.KEY WORDS: aerodynamic, aerogels, chitosan, salbutamol, supercritical fluid technology     

Modification of the Solid-State Nature of Sulfathiazole and Sulfathiazole Sodium by Spray Drying

Solid-state characterisation of a drug following pharmaceutical processing and upon storage is fundamental to successful dosage form development. The aim of the study was to investigate the effects of using different solvents, feed concentrations and spray drier configuration on the solid-state nature of the highly polymorphic model drug, sulfathiazole (ST) and its sodium salt (STNa). The drugs were spray-dried from ethanol, acetone and mixtures of these organic solvents with water. Additionally, STNa was spray-dried from pure water. The physicochemical properties including the physical stability of the spray-dried powders were compared to the unprocessed materials. Spray drying of ST from either acetonic or ethanolic solutions with the spray drier operating in a closed cycle mode yielded crystalline powders. In contrast, the powders obtained from ethanolic solutions with the spray drier operating in an open cycle mode were amorphous. Amorphous ST crystallised to pure form I at ≤35 % relative humidity (RH) or to polymorphic mixtures at higher RH values. The usual crystal habit of form I is needle-like, but spherical particles of this polymorph were generated by spray drying. STNa solutions resulted in an amorphous material upon processing, regardless of the solvent and the spray drier configuration employed. Moisture induced crystallisation of amorphous STNa to a sesquihydrate, whilst crystallisation upon heating gave rise to a new anhydrous polymorph. This study indicated that control of processing and storage parameters can be exploited to produce drugs with a specific/desired solid-state nature.KEY WORDS: amorphous state, dynamic vapour sorption, particle habit, physical stability, polymorphism, sulfathiazole     

Supercritical CO2 Generation of Nanometric Structure from Ocimum basilicum Mucilage Prepared for Pharmaceutical Applications

Plant-derived polymers are widely used in the pharmaceutical industry due to their emollient, lack of toxicity, and irritating nature and low cost. In this work, basil seed mucilage was dried using supercritical carbon dioxide phase inversion technique to form a nanometric structure. The obtained polymeric structures were characterized by scanning electron microscopy (SEM), Brunauer–Emmett–Teller (BET) method, and Fourier transform infrared spectroscopy (FTIR) and compared with the oven-derived sample group. It was demonstrated that the product morphology could be controlled by altering the composition of methanol which functioned as the co-solvent in the nonsolvent stream. The most homogeneous product (60-nm mean pore size diameter, 78 m²/g BET surface area with no agglomeration) was obtained with 2.5% methanol. The FTIR data showed that the presence of hydroxyl and carboxyl groups suggested the bioadhesive property of basil seed mucilage was good and many active pharmaceutical compounds might be loaded to the resultant nanometric structure to enhance drug release. Furthermore, the FTIR analyses indicated that the nature of the final product did not change during the supercritical drying procedure.KEY WORDS: basil seed gum, drug delivery, FTIR characterization, nanostructure, natural polymer, supercritical phase inversion     

Effervescence Assisted Fusion Technique to Enhance the Solubility of Drugs

The solubility of five poorly soluble drugs was enhanced by using an effervescence assisted solid dispersion (EASD) technique. EASDs were prepared by using modified fusion method. Drug and hydrophilic carrier were melted, and in this molten mixture, effervescence was generated by adding effervescence couple comprising organic acid (citric acid) and carbonic base (sodium bicarbonate). Solubility of drug powders, solid dispersions, and EASDs was determined at 25°C using shake flask method. Atorvastatin calcium, cefuroxime axetil, clotrimazole, ketoconazole, and metronidazole benzoate were estimated using a spectrophotometer at 246, 280, 260, 230, and 232 nm (λ_max), respectively. Solubility of atorvastatin calcium (from 100 to 345 μg/ml), cefuroxime axetil (from 441 to 1948 μg/ml), clotrimazole (from 63 to 677 μg/ml), ketoconazole (from 16 to 500 μg/ml), and metronidazole benzoate (from 112 to 208 μg/ml) in EASDs was enhanced by 3.45-, 4.4-, 10.7-, 31.2-, and 1.8-fold, respectively. Scanning electron micrographs of drug powder, solid dispersion, and EASDs were compared. Scanning electron micrographs of EASDs showed a uniform distribution of drug particles in the carrier matrix. Morphology (size and shape) of cefuroxime axetil particles was altered in solid dispersion as well as in EASD. EASDs showed better solubility enhancement than conventional solid dispersions. The present technique is better suitable for drugs having a low melting point or melt without charring. Effervescence assisted fusion technique of preparing solid dispersions can be employed for enhancing solubility, dissolution, and bioavailability of poorly soluble drugs.KEY WORDS: dissolution, effervescence, fusion, solid dispersion, solubility     

Biocatalytic synthesis of acrylates in organic solvents and supercritical fluids: I. optimization of enzyme environment

Biocatalytic transesterification of methylmethacrylate is possible in many different solvents. The reaction rate is readily controlled by variation in solvent physical properties. The reaction proceeds better in hydrophobic solvents, and activity can be restored in hydrophilic solvents by the addition of water. We have now demonstrated that supercritical carbon dioxide is not a good solvent for the reaction between 2-ethlhexanol and methylmethacrylate. It apperars that the supercritical carbon dioxide may either alter the pH of the microaqueous environment associated with the protein or reversibly form covalent complexes with free amine groups on the surface of the enzyme. Although supercritical carbon dioxide is a poor solvent for acrylate transesterification, many other supercritical fluids (ethane, ethylene, sulfur hexafluoride, and fluoroform) are better than most conventional solvents. In supercritical ethane it is possible to control the activity of the enzyme by changing pressure, and the enzyme appears to follow Michaelis-Menten Kinetics. We find that sulfur hexafluoride, the first anhydrous inorganic solvent in which biocatalytic activity has been reported, is a better solvent than any conventional or supercritical organic fluid tested.     

Formulation and Stability Testing of Itraconazole Crystalline Nanoparticles

Itraconazole (ITZ) crystalline nanoparticles were prepared using relatively simple, low-cost sonoprecipitation technique, in which both the solvent and antisolvent were organic in nature. The effect of stabilizer type (hydroxypropyl methylcellulose, hydroxypropyl cellulose, Inutec SP1®, and pluronic F127), drying method (oven and freeze drying) and matrix former used (Avicel PH101, and Aerosil®200) on the dissolution performance as a key characteristic of nanocrystals was evaluated. In 10 min, all of the prepared nanocrystals showed 3.77−8.59 times improvement in percent drug dissolved compared to pure ITZ. Concerning the effect of stabilizer type, the following rank order can be given: pluronic F127 ≥ hydroxypropyl cellulose ≥ hydroxypropyl methylcellulose (HPMC) > inutec SP1. Freeze-dried ITZ nanocrystals containing Avicel PH 101 showed better dissolution rate compared to other nanocrystals. The chemical structure of itraconazole nanocrystals was not changed as revealed by Fourier transform infrared. Stability study of selected nanocrystals (F5, F7, and F8) revealed physical and chemical stability of F7 and F8, while a decrease in dissolution rate of F5 was observed (although being chemically stable) when stored under high relative humidity conditions. Although inutec is less potent than pluronic F127 and HPMC regarding their effect on dissolution rate enhancement, it is equipotent to pluronic F127 in preserving the rapid drug dissolution.Key words: itraconazole, nanocrystals, nanoparticles, stability study     

Development and Characterisation of Ursolic Acid Nanocrystals Without Stabiliser Having Improved Dissolution Rate and In Vitro Anticancer Activity

Ursolic acid (UA), which is a natural pentacyclic triterpenoid, has the potential to be developed as an anticancer drug, whereas its poor aqueous solubility and dissolution rate limit its clinical application. The aim of the present study was to develop UA nanocrystals to enhance its aqueous dispersibility, dissolution rate and anticancer activity. Following the investigation on the effects of stabiliser, the ratio of organic phase to aqueous solution and drug concentration, the UA nanocrystals without stabiliser were successfully prepared by anti-solvent precipitation approach. The nanocrystals maintained similar crystallinity with particle size, polydispersion index and zeta potential values of 188.0 ± 4.4 nm, 0.154 ± 0.022, and −25.0 ± 5.9 mV, respectively. Compared with the raw material, the UA nanocrystals showed good aqueous dispensability and a higher dissolution rate, and they could be completely dissolved in 0.5% SDS solution within 120 min. Moreover, the suspension of UA nanocrystals was physically stable after storage at 4°C for 7 weeks. By inducing G₂/M phase cell cycle arrest, the UA nanocrystals significantly induced stronger cell growth inhibition activity against MCF-7 cells compared with free drug in vitro, although the uptake of free UA was approximately twice higher than that of the UA nanocrystals. The UA nanocrystals may be used as a potential delivery formulation for intravenous injection with enhanced dissolution velocity and anticancer activity.Key words: anticancer, dissolution, MCF-7, nanocrystals, ursolic acid     

Belowground carbon responses to experimental warming regulated by soil moisture change in an alpine ecosystem of the Qinghai–Tibet Plateau

Recent studies found that the largest uncertainties in the response of the terrestrial carbon cycle to climate change might come from changes in soil moisture under the elevation of temperature. Warming‐induced change in soil moisture and its level of influence on terrestrial ecosystems are mostly determined by climate, soil, and vegetation type and their sensitivity to temperature and moisture. Here, we present the results from a warming experiment of an alpine ecosystem conducted in the permafrost region of the Qinghai–Tibet Plateau using infrared heaters. Our results show that 3 years of warming treatments significantly elevated soil temperature at 0–100 cm depth, decreased soil moisture at 10 cm depth, and increased soil moisture at 40–100 cm depth. In contrast to the findings of previous research, experimental warming did not significantly affect NH ₄ ⁺‐N, NO ₃ ⁻‐N, and heterotrophic respiration, but stimulated the growth of plants and significantly increased root biomass at 30–50 cm depth. This led to increased soil organic carbon, total nitrogen, and liable carbon at 30–50 cm depth, and increased autotrophic respiration of plants. Analysis shows that experimental warming influenced deeper root production via redistributed soil moisture, which favors the accumulation of belowground carbon, but did not significantly affected the decomposition of soil organic carbon. Our findings suggest that future climate change studies need to take greater consideration of changes in the hydrological cycle and the local ecosystem characteristics. The results of our study will aid in understanding the response of terrestrial ecosystems to climate change and provide the regional case for global ecosystem models.     

Effect of different zinc levels on activity of superoxide dismutases & acid phosphatases and organic acid exudation on wheat genotypes

A field study was carried out to investigate the effect of three Zn levels 0, 20 kg ZnSO₄ ha⁻¹ and 20 kg ZnSO₄ ha⁻¹+ foliar spray of 0.5 % ZnSO₄ on superoxide dismutase activity, acid phosphatase activity and grain yield and a pot experiment to study the effect of zinc deficient and sufficient conditions on organic acid exudation. Increasing Zn levels was established as beneficial in improving the enzyme activities of genotypes. Combined foliar and soil application of Zn proved to be superior of all the treatments. Zinc application resulted in a maximum increment limit of 96.8 % in superoxide dismutase activity, 75.76 % in acid phosphatase activity, and a decrement limit of 88.57 % in oxalic acid exudation irrespective of stages and year of study. The increased enzyme activities had a positive impact on grain yield. As an average of all genotypes an improvement of 19.88 % in 2009 and 21.29 % in 2010 due to soil application while of 16.45 % in 2009 and 13.01 % in 2010 due to combined application was calculated for grain yield. There existed a variation among genotypes in showing responses towards zinc application and the genotypes UP 2584 and PBW 550 were found to be more responsive.     

冬虫夏草蛋白图谱及干燥条件对超氧化物歧化酶活性影响

本文采用十二烷基磺酸钠-聚丙烯酰胺凝胶电泳（SDS-PAGE）和双向电泳（2-DE）技术对3个野生冬虫夏草样本和3个培植冬虫夏草样本进行了比较分析。SDS-PAGE结果显示6个样品的蛋白质分子量主要分布在3-66.4kDa之间,Quantity one软件处理凝胶图谱显示蛋白条带在20-23条之间;采用PDQuest软件对双向电泳图谱处理,共检测到670-936个蛋白点,蛋白质主要分布在等电点为pI 4.5-6、分子量为29.0-66.7kDa和14.3-20.1kDa两个区域。尽管在不同样品之间存在一定程度的蛋白质差异,但是并没有发现野生冬虫夏草和培植冬虫夏草之间有显著差异。以超氧化物歧化酶（SOD）活力为评价指标对新鲜冬虫夏草以及冷冻干燥、20℃阴干和60℃烘干冬虫夏草样品进行比较,发现新鲜冬虫夏草SOD活力最高,冷冻干燥对冬虫夏草SOD活力的影响小于20℃阴干干燥,60℃烘干干燥对冬虫夏草SOD活力破坏最大,结果表明干燥条件对冬虫夏草SOD活性极其重要。     

The Effect of Acid pH Modifiers on the Release Characteristics of Weakly Basic Drug from Hydrophlilic–Lipophilic Matrices

The solubility of weakly basic drugs within passage though GI tract leads to pH-dependent or even incomplete release of these drugs from extended release formulations and consequently to lower drug absorption and bioavailability. The aim of the study was to prepare and evaluate hydrophilic–lipophilic (hypromellose–montanglycol wax) matrix tablets ensuring the pH-independent delivery of the weakly basic drug verapamil-hydrochloride by an incorporation of three organic acidifiers (citric, fumaric, and itaconic acids) differing in their concentrations, pK_a, and solubility. The dissolution studies were performed by the method of changing pH values, which better corresponded to the real conditions in the GI tract (2 h at pH 1.2 and then 10 h at pH 6.8). Within the same conditions, pH of matrix microenvironment was measured. To determine relationships between the above mentioned properties of acidifiers and the monitored effects (the amount of released drug and surface pH of gel layer in selected time intervals—360 and 480 min), the full factorial design method and partial least squares PLS-2 regression were used. The incorporation of the tested pH modifiers significantly increased the drug release rate from matrices. PLS-components explained 75% and 73% variation in the X- and Y-data, respectively. The obtained results indicated that the main crucial points (p < 0.01) were the concentration and strength of acidifier incorporated into the matrix. Contrary, the acid solubility surprisingly did not influence the selected effects except for the surface pH of gel layer in time 480 min.Key words: gel layer, matrix tablets, pH-independent drug release, pH modifiers, statistical evaluation     

Beneficial Effect of Acetic Acid on the Xylose Utilization and Bacterial Cellulose Production by Gluconacetobacter xylinus

In this work, acetic acid was found as one promising substrate to improve xylose utilization by Gluconacetobacter xylinus CH001. Also, with the help of adding acetic acid into medium, the bacterial cellulose (BC) production by G. xylinus was increased significantly. In the medium containing 3 g l⁻¹ acetic acid, the optimal xylose concentration for BC production was 20 g l⁻¹. In the medium containing 20 g l⁻¹ xylose, the xylose utilization and BC production by G. xylinus were stimulated by acetic acid within certain concentration. The highest BC yield (1.35 ± 0.06 g l⁻¹) was obtained in the medium containing 20 g l⁻¹ xylose and 3 g l⁻¹ acetic acid after 14 days. This value was 6.17-fold higher than the yield (0.21 ± 0.01 g l⁻¹) in the medium only containing 20 g l⁻¹ xylose. The results analyzed by FE-SEM, FTIR, and XRD showed that acetic acid affected little on the microscopic morphology and physicochemical characteristics of BC. Base on the phenomenon observed, lignocellulosic acid hydrolysates (xylose and acetic acid are main carbon sources present in it) could be considered as one potential substrate for BC production.     

Dendrimer,Liposomes, Carbon Nanotubes and PLGA Nanoparticles: One Platform Assessment of Drug Delivery Potential

Liposomes (LIP), nanoparticles (NP), dendrimers (DEN), and carbon nanotubes (CNTs), represent eminent classes of drug delivery devices. A study was carried out herewith by employing docetaxel (DTX) as model drug to assess their comparative drug delivery potentials. Under optimized conditions, highest entrapment of DTX was observed in CNT-based formulation (DTX-CNTs, 74.70 ± 4.9%) followed by nanoparticles (DTX-NP, 62.34 ± 1.5%), liposome (49.2 ± 1.51%), and dendrimers (28.26 ± 1.74%). All the formulations were found to be of nanometric size. In vitro release studies were carried out in PBS (pH 7.0 and 4.0), wherein all the formulations showed biphasic release pattern. Cytotoxicity assay in human cervical cancer SiHa cells inferred lowest IC₅₀ value of 1,235.09 ± 41.93 nM with DTX-CNTs, followed by DTX-DEN, DTX-LIP, DTX-NP with IC₅₀ values of 1,571.22 ± 151.27, 1,653.98 ± 72.89, 1,922.75 ± 75.15 nM, respectively. Plain DTX showed higher hemolytic toxicity of 22.48 ± 0.94%, however loading of DTX inside nanocarriers drastically reduced its hemolytic toxicity (DTX-DEN, 17.22 ± 0.48%; DTX-LIP, 4.13 ± 0.19%; DTX-NP, 6.43 ± 0.44%; DTX-CNTs, 14.87 ± 1.69%).KEY WORDS: carbon nanotubes, dendrimer, drug delivery, liposomes, nanoparticles, nanotechnology     

Determination of food constituents based on SFE: applications to vitamins A and E in meat and milk

A method has been developed for the determination of vitamins A and E in food using supercritical fluid extraction (SFE), applying liquid or solid trapping, with an accuracy equal to conventional solvent extraction methods. Under optimal conditions, using methanol modified carbon dioxide as a supercritical fluid, Hydromatrix as a water adsorbent, and with a small amount of ascorbic acid and methanol added to the sample, the extraction time is reduced to 80 min. This time is considerably shorter than in conventional methods. Other advantages are the reduction of manual manipulations leading to lower labour costs and reduced consumption of organic solvents in the sample preparation step.     

Development and Optimization of Gastro-Retentive Controlled-Release Tablet of Calcium-Disodium Edentate and its In Vivo Gamma Scintigraphic Evaluation

Medical management of heavy metal toxicity, including radioactive ones, is a cause for concern because of their increased use in energy production, healthcare, and mining. Though chelating agents like EDTA and DTPA in parenteral form are available, no suitable oral formulation is there that can trap ingested heavy metal toxicants in the stomach itself, preventing their systemic absorption. The objective of the present study was to develop and optimize gastro-retentive controlled-release tablets of calcium-disodium edentate (Ca-Na₂EDTA). Gastro-retentive tablet of Ca-Na₂EDTA was prepared by direct compression method. Thirteen tablet formulations were designed using HPMC-K4M, sodium chloride, and carbopol-934 along with effervescing agents sodium bicarbonate and citric acid. Tablet swelling ability, in vitro buoyancy, and drug dissolution studies were conducted in 0.1 N HCl at 37 ± 0.5°C. Ca-Na₂EDTA was radiolabeled with technetium-99m for scintigraphy-based in vivo evaluation. Formula F8 (Ca-Na₂EDTA 200 mg, carbopol 100 mg, avicel 55 mg, citric acid 30 mg, NaHCO₃ 70 mg, NaCl 100 mg, and HPMC 95 mg) was found to be optimum in terms of excellent floating properties and sustained drug release. F8 fitted best for Korsmeyer–Peppas equation with an R² value of 0.993. Gamma scintigraphy in humans showed mean gastric retention period of 6 h. Stability studies carried out in accordance with ICH guidelines and analyzed at time intervals of 0, 1, 2, 4, and 6 months have indicated insignificant difference in tablet hardness, drug content, total floating duration, or matrix integrity of the optimized formulation. Gastro-retentive, controlled-release tablet of Ca-Na₂EDTA was successfully developed using effervescent technique as a potential oral antidote for neutralizing ingested heavy metal toxicity.KEY WORDS: calcium disodium EDTA, controlled-release tablet, gamma scintigraphy, heavy metal decorporation     

Carbon storage in China's forest ecosystems: estimation by different integrative methods

Carbon (C) storage for all the components, especially dead mass and soil organic carbon, was rarely reported and remained uncertainty in China''s forest ecosystems. This study used field‐measured data published between 2004 and 2014 to estimate C storage by three forest type classifications and three spatial interpolations and assessed the uncertainty in C storage resulting from different integrative methods in China''s forest ecosystems. The results showed that C storage in China''s forest ecosystems ranged from 30.99 to 34.96 Pg C by the six integrative methods. We detected 5.0% variation (coefficient of variation, CV, %) among the six methods, which was influenced mainly by soil C estimates. Soil C density and storage in the 0–100 cm soil layer were estimated to be 136.11–153.16 Mg C·ha⁻¹ and 20.63–23.21 Pg C, respectively. Dead mass C density and storage were estimated to be 3.66–5.41 Mg C·ha⁻¹ and 0.68–0.82 Pg C, respectively. Mean C storage in China''s forest ecosystems estimated by the six integrative methods was 8.557 Pg C (25.8%) for aboveground biomass, 1.950 Pg C (5.9%) for belowground biomass, 0.697 Pg C (2.1%) for dead mass, and 21.958 Pg C (66.2%) for soil organic C in the 0–100 cm soil layer. The R:S ratio was 0.23, and C storage in the soil was 2.1 times greater than in the vegetation. Carbon storage estimates with respect to forest type classification (38 forest subtypes) were closer to the average value than those calculated using the spatial interpolation methods. Variance among different methods and data sources may partially explain the high uncertainty of C storage detected by different studies. This study demonstrates the importance of using multimethodological approaches to estimate C storage accurately in the large‐scale forest ecosystems.     

Removal of organic solvent from antibiotics with supercritical carbon dioxide

Organic solvents were rapidly extracted from penicillin G potassium and streptomycin sulfate with supercritical carbon dioxide (SC-CO₂) at 200 atm and 35°C without loss of antibiotic activities. The amounts of organic solvents remaining in the antibiotics depended upon pressure and temperature for a given extraction time. A semilogarithmic plot of remaining amounts of organic solvents against extraction time gave a straight line in the early extraction stage, allowing prediction of the extraction time required for decreasing amounts of organic solvent. The addition of water as an entrainer to SC-CO₂ resulted in a significant increase in extraction rates.     

Subtilisin-catalyzed transesterification in supercritical carbon dioxide

Summary Subtilisin Carlsberg was found to catalyze transesterification between N-acetyl-L-phenylalanine chloroethyl ester and ethanol in supercritical carbon dioxide. The effects of different temperatures and carbon dioxide/ethanol ratios on the reaction rate were investigated. A comparative study showed that enzymatic transesterification is faster in supercritical carbon dioxide than in anhydrous organic solvents.     

Liquid Proliposomes of Nimodipine Drug Delivery System: Preparation, Characterization, and Pharmacokinetics

To investigate the possibility of liquid proliposomes being carriers for oral delivery, nimodipine liquid proliposomes-based soft capsules (NPSC) were prepared. Nimodipine proliposomes were characterized by transmission electron microscopy (TEM), conversion rate from proliposomes to liposomes, entrapment efficiency, particle size, and zeta potential. Accelerated stability testing of NPSC was carried out for 3 months at 40 ± 2°C, 75 ± 5% RH. The concentration of nimodipine in plasma of New Zealand rabbits of NPSC, nimodipine soft capsules, and hydrated liposomes was studied. Results showed that nimodipine proliposomes were automatically converted into liposomes when exposed to a water phase in 30 s. The average diameter was 378.6 ± 26.5 nm in distilled water with entrapment efficiency (EE%) of 84.7 ± 5.9%, while the average diameter was 316.9 ± 34.6 nm in 0.1 M hydrochloric acid solution with EE% of 72.8 ± 4.7%. Accelerated stability test showed that there was no change in drug content, particle size, and EE% except for a decrease in dissolution of nimodipine. In vivo experiments, areas under the plasma level-time curve of NPSC and nimodipine-hydrated liposomes increased 2.41 and 2.34 times more than that of nimodipine soft capsules, peak concentration increased 2.87 and 2.92 times, time of peak concentration from 0.75 to 2 and 1 h, respectively. Nimodipine-hydrated liposomes presented similar pharmacokinetic parameters compared with NPSC. Results suggested that NPSC offered a potential way to improve oral delivery of nimodipine.Key words: liquid proliposomes, nimodipine, pharmacokinetics, soft capsules, stability