Triple-FRET Technique for Energy Transfer Between Conjugated Polymer and TAMRA Dye with Possible Applications in Medical Diagnostics

Three-component Förster resonance energy transfer (FRET) has been used to obtain efficient FRET between the cationic conjugated polymer (CCP) as donor and 5-carboxy tetramethylrhodamine (TAMRA) dye as acceptor, by using an intermediate donor, fluorescein. In spite of the fact that there is enough overlap between the emission spectra of CCP and absorption spectra of TAMRA, the efficiency of FRET between CCP and TAMRA is poor. The reason for this is that while the Förster critical distance is not very sensitive to the overlap, the FRET efficiency is extremely sensitive to it. However, it is observed that the FRET efficiency between CCP and TAMRA improves considerably when fluorescein is introduced in the solution. The triple FRET so obtained can be used for deoxyribonucleic acid sequence detection in medical diagnostics because the fluorescence emission from TAMRA is pH-insensitive.     

Protease-sensitive signalling by chemically engineered intramolecular fluorescent resonance energy transfer mutants of green fluorescent protein

The native cysteine residues of green fluorescent protein (GFP) at positions 48 and 70 were replaced by non-thiolic amino acids, and new cysteine sites were introduced at specific, surface positions. Based on molecular modeling of the GFP structure, the sites chosen for mutagenesis to Cys were glutamic acid at position 6 and isoleucine at position 229. These new, unique cysteine sites provided reactive thiol groups suitable for site-specific chemical modification by eosin-based fluorescence labels. The new constructs were designed to serve as the basis of proof of principle for fluorescence resonance energy transfer (FRET) using an enzyme-activated (trypsin) intervening sequence between native and chemically conjugated fluorophores. These eosin moieties provided chemical FRET partners for the native GFP chromophore. On excitation, these GFP-eosin constructs exhibited strong intramolecular FRET, with quenching of the native GFP (511 nm) fluorophore emission and emission around 540 nm, corresponding to eosin. GFP mutants engineered with trypsin-sensitive sequences close to the eosin site, so that on trypsinolysis FRET was destroyed, the emission wavelength switching from that of the chemical FRET partner back to that of the native GFP fluorophore, providing efficient, ratio-based detection. This protein engineering provides the basis for novel bioprobes for enzymatic triggering using intramolecular FRET between GFP and carefully sited chemical labels.     

Caspase-3 sensitive signaling in vivo in apoptotic HeLa cells by chemically engineered intramolecular fluorescence resonance energy transfer mutants of green fluorescent protein

Green fluorescent protein (UV5) was re-engineered to remove native cysteine residues, and a new cysteine was introduced near the C-terminus, approximately 20 A from the native fluorophore, for site-specific attachment of chemical fluorophores. The resultant efficient intramolecular FRET quenched GFP emission and gave a new emission band from the conjugated fluorophore. Caspase-3 cleavage of constructs with a caspase-3 sequence near the C-terminus in the sequence between the native fluorophore and the new cysteine, located C-terminal to the caspase site, destroyed the FRET, the emitted color reverting to that of unmodified GFP. This process was demonstrated in vitro with caspase-3 and lysates from cells undergoing apoptosis. Real-time emission changes for the Alexa Fluor 532 conjugate of this GFP, studied quantitatively in vivo for single HeLa cells using the ratios of fluorescence at the red and green maxima by confocal microscopy, showed that caspase-3 action in the cytosol preceded that in the nucleus.     

Two-photon excitation fluorescence resonance energy transfer with small organic molecule as energy donor for bioassay

A fluorescence resonance energy transfer (FRET) model using two-photon excitable small organic molecule DMAHAS as energy donor has been constructed and tried in an assay for avidin. In the FRET model, biotin was conjugated to the FRET donor, and avidin was labeled with a dark quencher DABS-Cl. Binding of DABS-Cl labeled avidin to biotinylated DMAHAS resulted in the quenching of fluorescence emission of the donor, based on which a competitive assay for free avidin was established. With using such donors that are excited in IR region, it is capable of overcoming some primary shortcomings of conventional one-photon FRET methods, especially in bioassays, such as the interference from background fluorescence or scattering light, the coexcitation of the energy acceptor with the donor. And such small molecules also show advantages over inorganic up-converting particles that also give anti-Stokes photoluminescence and have been applied as FRET donor recently. The results of this work suggest that two-photon excitable small molecules could be a promising energy donor for FRET-based bioassays.     

Exciton interaction in molecular beacons: a sensitive sensor for short range modifications of the nucleic acid structure

Molecular beacons are hairpin-shaped, single-stranded oligonucleotides constituting sensitive fluorescent DNA probes widely used to report the presence of specific nucleic acids. In its closed form the stem of the hairpin holds the fluorophore covalently attached to one end, close to the quencher, which is covalently attached to the other end. Here we report that in the closed form the fluorophore and the quencher form a ground state intramolecular heterodimer whose spectral properties can be described by exciton theory. Formation of the heterodimers was found to be poorly sensitive to the stem sequence, the respective positions of the dyes and the nature of the nucleic acid (DNA or RNA). The heterodimer allows strong coupling between the transition dipoles of the two chromophores, leading to dramatic changes in the absorption spectrum that are not compatible with a Förster-type fluorescence resonance energy transfer (FRET) mechanism. The excitonic heterodimer and its associated absorption spectrum are extremely sensitive to the orientation of and distance between the dyes. Accordingly, the application of molecular beacons can be extended to monitoring short range modifications of the stem structure. Moreover, the excitonic interaction was also found to operate for doubly end-labeled duplexes.     

High throughput measurement of duplex, triplex and quadruplex melting curves using molecular beacons and a LightCycler

We have used oligonucleotides containing molecular beacons to determine melting profiles for intramolecular DNA duplexes, triplexes and quadruplexes (tetraplexes). The synthetic oligonucleotides used in these studies contain a fluorophore (fluorescein) and quencher (methyl red) attached either to deoxyribose or to the 5 position of dU. In the folded DNA structures the fluorophore and quencher are in close proximity and the fluorescence is quenched. When the structures melt, the fluorophore and quencher are separated and there is a large increase in fluorescence. These experiments were performed in a Roche LightCycler; this requires small amounts of material (typically 4 pmol oligonucleotide) and can perform 32 melting profiles in parallel. We have used this technique to compare the stability of triplexes containing different base analogues and to confirm the selectivity of a triplex-binding ligand for triplex, rather than duplex, DNA. We have also compared the melting of inter- and intramolecular quadruplexes.     

Proximity of bound Hoechst 33342 to the ATPase catalytic sites places the drug binding site of P-glycoprotein within the cytoplasmic membrane leaflet

The P-glycoprotein multidrug transporter carries out ATP-driven cellular efflux of a wide variety of hydrophobic drugs, natural products, and peptides. Multiple binding sites for substrates appear to exist, most likely within the hydrophobic membrane spanning regions of the protein. Since ATP hydrolysis is coupled to drug transport, the spatial relationship of the drug binding sites relative to the ATPase catalytic sites is of considerable interest. We have used a fluorescence resonance energy transfer (FRET) approach to estimate the distance between a bound substrate and the catalytic sites in purified P-glycoprotein. The fluorescent dye Hoechst 33342 (H33342), a high-affinity P-glycoprotein substrate, bound to the transporter and acted as a FRET donor. H33342 showed greatly enhanced fluorescence emission when bound to P-glycoprotein, together with a substantial blue shift, indicating that the drug binding site is located in a nonpolar environment. Cys428 and Cys1071 within the catalytic sites of P-glycoprotein were covalently labeled with the acceptor fluorophore NBD-Cl (7-chloro-4-nitrobenz-2-oxa-1,3-diazole). H33342 fluorescence was highly quenched when bound to NBD-labeled P-glycoprotein relative to unlabeled protein, indicating that FRET takes place from the bound dye to NBD. The distance separating the bound dye from the NBD acceptor was estimated to be approximately 38 A. Transition-state P-glycoprotein with the complex ADP*orthovanadate*Co2+ stably trapped at one catalytic site bound H33342 with similar affinity, and FRET measurements led to a similar separation distance estimate of 34 A. Since previous FRET studies indicated that a fluorophore bound within the catalytic site was positioned 31-35 A from the interfacial region of the bilayer, the H33342 binding site is likely located 10-14 A below the membrane surface, within the cytoplasmic leaflet of the membrane, in both resting-state and transition-state P-glycoprotein.     

A nonfluorescent, broad-range quencher dye for Förster resonance energy transfer assays

We report here a novel, water-soluble, nonfluorescent dye that efficiently quenches fluorescence from a broad range of visible and near-infrared (NIR) fluorophores in Förster resonance energy transfer (FRET) systems. A model FRET-based caspase-3 assay system was used to test the performance of the quencher dye. Fluorogenic caspase-3 substrates were prepared by conjugating the quencher, IRDye^® QC-1, to a GDEVDGAK peptide in combination with fluorescein (emission maximum ∼540 nm), Cy3 (∼570 nm), Cy5 (∼670 nm), IRDye 680 (∼700 nm), IRDye 700DX (∼690 nm), or IRDye 800CW (∼790 nm). The Förster distance R₀ values are calculated as 41 to 65 Å for these dye/quencher pairs. The fluorescence quenching efficiencies of these peptides were determined by measuring the fluorescence change on complete cleavage by recombinant caspase-3 and ranged from 97.5% to 98.8%. The fold increase in fluorescence on caspase cleavage of the fluorogenic substrates ranged from 40 to 83 depending on the dye/quencher pair. Because IRDye QC-1 effectively quenches both the NIR fluorophores (e.g., IRDye 700DX, IRDye 680, IRDye 800CW) and the visible fluorophores (e.g., fluorescein, Cy3, Cy5), it should find broad applicability in FRET assays using a wide variety of fluorescent dyes.     

Characterization of one- and two-photon excitation fluorescence resonance energy transfer microscopy

Advances in molecular biology provide various methods to define the structure and function of the individual proteins that form the component parts of subcellular structures. The ability to see the dynamic behavior of a specific protein inside the living cell became possible through the application of advanced fluorescence resonance energy transfer (FRET) microscope techniques. The fluorophore molecule used for FRET imaging has a characteristic absorption and emission spectrum that should be considered for characterizing the FRET signal. In this article we describe the system development for the image acquisition for one- and two-photon excitation FRET microscopy. We also describe the precision FRET (PFRET) data analysis algorithm that we developed to remove spectral bleed-through and variation in the fluorophore expression level (or concentration) for the donor and acceptor molecules. The acquired images have been processed using a PFRET algorithm to calculate the energy transfer efficiency and the distance between donor and acceptor molecules. We implemented the software correction to study the organization of the apical endosome in epithelial polarized MDCK cells and dimerization of the CAATT/enhancer binding protein alpha (C/EBPalpha). For these proteins, the results revealed that the extent of correction affects the conventionally calculated energy transfer efficiency (E) and the distance (r) between donor and acceptor molecules by 38 and 9%, respectively.     

Optimizing the cationic conjugated polymer-sensitized fluorescent signal of dye labeled oligonucleotide for biosensor applications

Methods for real time, highly selective and sensitive polynucleotide detection are of vast scientific and economic importance. Fluorescence resonance energy transfer (FRET)-based assays which take advantage of the collective response of water-soluble conjugated polymers (CPs) and the self-assembly characteristic of aqueous polyelectrolytes have been widely used for the detection of DNA, RNA, protein and small molecules. The detection sensitivity of CP-based biosensor is dependent on the signal amplification of dye emission upon excitation of CP relative to that upon direct excitation of the dye. Using cationic polyfluorene derivatives and chromophore (fluorescein or Texas Red) labeled single-stranded DNA molecules (ssDNA-C*) as donor/acceptor pairs, we show that in addition to the spectral overlap, orientation and distance between the donor and the acceptor, the energy levels and fluorescence quenching of the donor/acceptor within the polymer/DNA-C* complexes are also important factors that affect the signal output of dye emission.     

Unexpected transformation of black hole quenchers in electrophoretic purification of the fluorescein-containing TaqMan probes

The fluorescence quenchers BHQ1 and BHQ2 can be modified by trace amounts of ammonium persulfate, used for initiating gel polymerization, in electrophoretic purification of TaqMan probes using a denaturing polyacrylamide gel. The case study of BHQ1 quencher has demonstrated that a Boyland–Sims reaction proceeds in the presence of ammonium persulfate to give the corresponding sulfate. The absorption maximum of the resulting quencher shifts to the short-wavelength region relative to the absorption maximum of the initial BHQ1. The TaqMan probe containing such a quencher is less efficient as compared with the probe carrying an unmodified BHQ1. The presence of fluorescein in TaqMan probe plays decisive role in this transformation: the quencher modification proceeds at a considerably lower rate when the fluorescein is absent or replaced with a rhodamine dye (for example, R6G). It is assumed that the observed reaction can take place in two ways—both in darkness and in the reaction of the quencher in an excited state due to energy transfer from the fluorophore irradiated by light.     

Polyvinyl pyrrolidone capped fluorescent anthracene nanoparticles for sensing fluorescein sodium in aqueous solution and analytical application for ophthalmic samples

Based on the known complexation ability between polyvinyl pyrrolidone (PVP) and fluorescein sodium (FL Na⁺), fluorescent PVP capped anthracene nanoparticles (PVP‐ANPs) were prepared using a reprecipitation method for detection of fluorescein in aqueous solution using the fluorescence resonance energy transfer (FRET) approach. A dynamic light scattering histogram of PVP‐ANPs showed narrower particle size distribution and the average particle size was 15 nm. The aggregation‐induced enhanced emission (AIEE) of PVP‐ANPs was red shifted from its monomer by 1087.22 cm^?1. The maximum emission was seen to occur at 420 nm. The presence of FL Na⁺ in the vicinity of PVP‐ANPs quenched the fluorescence of PVP‐ANPs because of its adsorption on the surface of PVP‐ANPs in aqueous suspension. The FL Na⁺ and PVP‐ANPs were brought close enough, typically to 7.89 nm, which was less than the distance of 10 nm that is required between the energy donor–acceptor molecule for efficient FRET. The quenching results fit into the Stern–Volmer relationship even at temperatures greater than ambient temperatures. The thermodynamic parameters determined from FRET results helped to propose binding mechanisms involving hydrophobic and electrostatic molecular interaction. The fluorescence quenching results were used further to develop an analytical method for estimation of fluorescein sodium from ophthalmic samples available commercially in the market. Copyright © 2015 John Wiley & Sons, Ltd.     

Bidirectional fluorescence resonance energy transfer (FRET) in mutated and chemically modified yellow fluorescent protein (YFP)

Fluorescence resonance energy transfer (FRET) using fluorescent protein variants are used for studying the associations and biomolecular motions of macromolecules inside the cell. Intramolecular FRET utilizing fluorescent chemical labels has been applied in nucleic acid chemistry for detection of specific sequence. However, the biotechnological applications of intramolecular FRET in fluorescent proteins have not been exploited. This study demonstrates the intramolecular FRET between fluorescent protein and conjugated chemical label whereby FRET occurs from inside to outside and vice versa for fluorescent protein. The fluorescent protein is modified for the attachment of chemical fluorophores and the novel FRET pairs created by conjugation are MDCC (435/475)-Citrine (516/529) and Citrine-Alexa fluor (568/603). These protein-label pairs exhibited strong intramolecular FRET and the energy transfer efficiency was determined based on the time evolution of the ratio of emission intensities of labeled and unlabeled proteins. The efficiency was found to be 0.79 and 0.89 for MDCC-Citrine and 0.24 and 0.65 for Citrine-Alexa Fluor pairs when the label is conjugated at different sites in the protein. Fo?rster distance and the average distance between the fluorophores were also determined. The bidirectional approach described here can provide new insights into designing FRET-based sensors.     

Solute accessibility to N epsilon-fluorescein isothiocyanate-lysine-23 cobra alpha-toxin bound to the acetylcholine receptor. A consideration of the effect of rotational diffusion and orientation constraints on fluorescence quenching.

To obtain information on the disposition of alpha-toxin when bound to the acetylcholine receptor (AChR), we evaluated the accessibility of solutes to fluorescein isothiocyanate (FITC) conjugated to alpha-toxin (siamensis 3) at lysine 23 (FITC-toxin) by measuring the rate constants for iodide quenching of the fluorescence of fluorescein free in solution and FITC-toxin free in solution and bound to AChR. Relative to the free fluorescein, we observed a 55% reduction in the quenching rate constant for the unbound FITC-toxin and 80% reduction for the AChR-bound FITC-toxin. It is tempting to interpret a decrease in the quenching rate constant as due to an increase in the masking of the labeling fluorophore, which in our case would then be indicative of masking of fluorescein conjugated to the free toxin and masking of FITC-toxin, in the region of lysine 23, when bound to AChR. However, elementary considerations indicate that the quenching rate depends not only on geometrical masking factors but also on the translational and rotational mobilities of the labeled molecules as well as orientational constraints. To evaluate these effects we have established quantitative relations between the rate of fluorescence quenching, the degree of masking of fluorophore, translational and rotational rates, and orientational constraints of the labeled macromolecules, using recent formulations for the rate of reaction between asymmetric molecules (Shoup et al., 1981, Biophys. J., 36:619-714). These relations predict that the decrease in quenching constant observed for the labeled FITC-toxin as well as the AChR-bound FITC-toxin is largely due to differences in translational and rotational rates and orientational constraints and not to significant increases in geometrical masking. Our theoretical formulation shows that the quenching rate can be decreased by a factor of 2-5 merely by immobilizing a fluorophore on the surface of a large protein without any significant increase in geometrical masking.     

Solvent perturbation of the fluorescence of fluorescein bound to specific antibody. Fluorescence quenching of the bound fluorophore by iodide

Differential accessibility of liganded, high affinity rabbit anti-fluorescyl IgG antibody combining sites to the aqueous milieu has been investigated by solvent perturbation of the extrinsic fluorescence of bound fluorophore. Iodide, a dynamic quencher of fluorescein, was selected for use in these studies after examination of a number of water-soluble fluorescence quenchers. Quenching of antibody-bound fluorophore by iodide was measured with a number of liganded anti-fluorescyl IgG preparations, demonstrating partial solvent exposure of the fluorophore as well as heterogeneity of the high affinity antibody populations. Fluorescence quenching, lifetime, and absorption spectroscopy provided evidence that the antibody-bound fluorophore quenched by iodide interacted with it directly and that anomalous binding of the anion to the surface of the protein, resulting in ground state perturbations of the immunoglobulin, could not explain the observed results.     

Viability of a FRET dual binding technique to detect calpastatin

We have been investigating a fluorescence dual binding biosensor to detect calpastatin. Calpastatin is a protein found in meat and it is a regulator of meat tenderness. The ability to accurately predict the calpastatin concentration of beef with a biological sensor at the time of grading would lead to a more accurate assessment of the overall palatability of beef when it reaches the consumer. Meat can then be labeled as tender or tough, which would greatly enhance meat processors' ability to grade meat, allowing them to recover lost revenue. The biosensor technique utilized the chemical transduction principle of fluorescence resonance energy transfer (FRET). FRET requires the use of two fluorophores, termed a donor and acceptor. In this study, the donor fluorophore was conjugated to the protein, mu-calpain, while the acceptor fluorophore was conjugated to a monoclonal antibody. The results showed that in the presence of calpastatin, the labeled mu-calpain and antibody would bind to calpastatin, reducing the distance between the two proteins and eliciting a measurable change in fluorescence. The FRET dual binding technique was tested in heated and unheated meat extract, and a limit of detection for calpastatin was 120 ng/ml in diluted heated meat extract with no significant response in the unheated meat extract. Stable response times were achieved within 5 min. The proof-of-principle of utilizing a FRET dual binding technique to detect calpastatin in heated meat extract has been established.     

Development of a novel FRET immunosensor technique

We report on a novel technique to develop an optical immunosensor based on fluorescence resonance energy transfer (FRET). IgG antibodies were labeled with acceptor fluorophores while one of three carrier molecules (protein A, protein G, or F(ab')2 fragment) was labeled with donor fluorophores. The carrier molecule was incubated with the antibody to allow specific binding to the Fc portion. The labeled antibody-protein complex was then exposed to specific and nonspecific antigens, and experiments were designed to determine the 'in solution' response. The paper reports the results of three different donor-acceptor FRET pairs, fluorescein isothiocyanate/tetramethylrhodamine isothiocyanate, Texas Red/Cy5, and Alexa Fluor 546/Alexa Fluor 594. The effects of the fluorophore to protein conjugation ratio (F/P ratio) and acceptor to donor fluorophore ratios between the antibody and protein (A/D ratio) were examined. In the presence of specific antigens, the antibodies underwent a conformational change, resulting in an energy transfer from the donor to the acceptor fluorophore as measured by a change in fluorescence. The non-specific antigens elicited little or no changes. The Alexa Fluor FRET pair demonstrated the largest change in fluorescence, resulting in a 35% change. The F/P and A/D ratio will affect the efficiency of energy transfer, but there exists a suitable range of A/D and F/P ratios for the FRET pairs. The feasibility of the FRET immunosensor technique was established; however, it will be necessary to immobilize the complexes onto optical substrates so that consistent trends can be obtained that would allow calibration plots.     

Fluorescence resonance energy transfer between two quantum dots with immunocomplexes of antigen and antibody as a bridge.

In this study, 573 nm quantum dots (QDs)-rabbit IgG-goat anti-rabbit IgG-638 nm QDs immunocomplexes were prepared, utilizing antigen-antibody interaction. 573 nm-emitting QDs were conjugated to antigen (rabbit IgG) and 638 nm-emitting QDs were conjugated to antibody (goat anti-rabbit IgG) via electrostatic/hydrophilic self-assembly, respectively. The mutual affinity of the antigen and antibody brought two kinds of QDs close enough to result in fluorescence resonance energy transfer (FRET) between them; the luminescence emission of 573 nm QDs was quenched, while that of 638 nm QDs was enhanced. The luminescence emission of 573 nm QDs could be recovered when the immunocomplexes were exposed to the unlabelled rabbit IgG antigen. The FRET efficiency (E) and the distance between the donor and the acceptor were calculated.     

Fluorescence resonance energy transfer (FRET) using ssDNA binding fluorescent dye

There is a need for simple and inexpensive methods for genotyping single nucleotide polymorphisms (SNPs) and short insertion/deletion variations (InDels). In this work, I demonstrate that a single-stranded DNA (ssDNA) binding dye can be used as a donor fluorophore for fluorescence resonance energy transfer (FRET). The method presented is a homogenous assay in which detection is based on the FRET from the fluorescence of the ssDNA dye bound to the unmodified detection primer to the fluorescent nucleotide analog incorporated into this detection primer during cyclic template directed primer extension reaction. Collection of the FRET emission spectrum with a scanning fluorescence spectrophotometer allows powerful data analysis. The fluorescence emission signal is modified by the optical properties of the assay vessel. This seems to be a completely neglected parameter. By proper selection of the optical properties of the assay plate one can improve the detection of the fluorescence emission signal.     

A fluorescence resonance energy transfer-based approach for investigating late endosome-lysosome retrograde fusion events

Traditionally, lysosomes have been considered to be a terminal endocytic compartment. Recent studies suggest that lysosomes are quite dynamic, being able to fuse with other late endocytic compartments as well as with the plasma membrane. Here we describe a quantitative fluorescence energy transfer (FRET)-based method for assessing rates of retrograde fusion between terminal lysosomes and late endosomes in living cells. Late endosomes were specifically labeled with 800-nm latex beads that were conjugated with streptavidin and Alexa Fluor 555 (FRET donor). Terminal lysosomes were specifically labeled with 10,000-MW dextran polymers conjugated with biotin and Alexa Fluor 647 (FRET acceptor). Following late endosome-lysosome fusion, the strong binding affinity between streptavidin and biotin brought the donor and acceptor fluorophore molecules into close proximity, thereby facilitating the appearance of a FRET emission signal. Because apparent size restrictions in the endocytic pathway do not permit endocytosed latex beads from reaching terminal lysosomes in an anterograde fashion, the appearance of the FRET signal is consistent with retrograde transport of lysosomal cargo back to late endosomes. We assessed the efficiency of this transport step in fibroblasts affected by different lysosome storage disorders—Niemann-Pick type C, mucolipidosis type IV, and Sandhoff’s disease, all of which have a similar lysosomal lipid accumulation phenotype. We report here, for the first time, that these disorders can be distinguished by their rate of transfer of lysosome cargos to late endosomes, and we discuss the implications of these findings for developing new therapeutic strategies.