An unexpected ‘4+2’ [N3S]/[NS] rhenium(IV) complex formed upon cleavage of a Re(V) imido bond

The reaction of [Re(NMe)Cl₃(PPh₃)₂] with the pentadentate [N₃S₂] ligand pyN₂H₂S₂---H₂ [2,6-bis(2-mercaptophenylamino)dimethylpyridine] (1) in the presence of triethylamine did not yield the anticipated six-coordinate complex [Re(NMe)(η⁵-pyN₂HS₂)] (2), but rather resulted in cleavage of the Re(V)=NMe bond. A novel six-coordinate Re(IV) [N₃S]/[NS] complex [Re(η⁴-SC₆H₄---2-NCH₂---C₅H₃N---C=NC₆H₄---2-S)(η²-NHC₆H₄---2-S)] (4) was thus obtained with the simultaneous coordination of 2-aminothiophenol, a dianionic bidentate [NS] donor resulting from the decomposition of the parent ligand and ligand 3, a dianionic tetradentate [N₃S] donor formed by partial self-condensation and subsequent oxidation of the parent ligand 1. Crystal data for 4: C₂₅H₁₈N₄S₃Re·CH₂Cl₂, monoclinic, space group P2₁/n, a=9.255(2) Å, b=11.181(2) Å, c=25.316(4) Å, β=97.434(3)°, V=2587.8(7) Å³ and Z=4.     

Heterobimetallic chloro bridgedcomplexes of (η:η−C10H16)-ruthenium(IV) with palladium(II), platinum(II), rhodium(III), iridium(III), copper(I) and rhodium(I)

Metathesis of [(η³:η³−C₁₀H₁₆)Ru(Cl) (μ−Cl)]₂ (1) with [R₃P) (Cl)M(μ-Cl)]₂ (M = Pd, Pt), [Me₂NCH₂C₆H₄Pd(μ-Cl)]₂ and [(OC)₂Rh(μ-Cl)]₂ affords the heterobimetallic chloro bridged complexes (η³:η³-C₁₀H₁₆) (Cl)Ru(μ-Cl)₂M(PR₃)(Cl) (M = Pd, Pt), (η³:η³-C₁₀H₁₆) (Cl)Ru(μ-Cl)₂PdC₆H₄CH₂NMe₂ and (η³:η³-C₁₀H₁₆) (Cl)Ru(μ-Cl)₂Rh(CO)₂, respectively. Complex 1 reacts with [Cp^*M(Cl) (μ-Cl)]₂ (M = Rh, Ir), [p-cymene Ru(Cl) (μ-Cl]₂ and [(Cy₃P)Cu(μ-Cl)]₂ to give an equilibrium of the heterobimetallic complexes and of educts. The structures of (η³:η³-C₁₀H₁₆)Ru(μ-Cl)₂Pd(PR₃) (Cl) (R = Et, Bu) and of one diastereoisomer of (η³:η³-C₁₀H₁₆)Ru(μ-Cl)₂IrCp^*(Cl) were determined by X-ray diffraction.     

Reactivity study of cyclopentadienyl osmium(II) bisphosphine azido complexes with activated alkynes and nitriles: Isolation of osmium triazolato and tetrazolato complexes by 1,3-dipolar addition

The cyclopentadienyl osmium(II) complexes [(η⁵-C₅H₅)Os(PPh₃)₂X] [X = Br (1), CH₃CN (2)] reacts with sodium azide (NaN₃) to yield the corresponding azido complex [(η⁵-C₅H₅)Os(PPh₃)₂N₃] (3). This undergoes [3+2] dipolar cycloaddition reaction with activated alkynes like dimethyl and diethyl acetylenedicarboxylate to yield triazolato complexes [(η⁵-C₅H₅)Os(PPh₃)₂{N₃C₂(CO₂R)₂}] [R = –CH₂CH₃ (4) and –CH₃ (5)]. The complex 3 also reacts with nitriles such as tetracyanoethylene (TCE), fumaronitrile and p-nitrobenzonitrile to yield complexes of the type [(η⁵-C₅H₅)Os(PPh₃)₂{N₄C₂(CN)C(CN)₂}] (6), [(η⁵-C₅H₅)Os(PPh₃)₂{N₃C₂HCN}] (7) and [(η⁵-C₅H₅)Os(PPh₃)₂{N₄C(C₆H₄–p-NO₂)}] (8). These complexes were fully characterized on the basis of microanalyses, FT-IR and NMR spectroscopic data. The molecular structure of the representative complex [(η⁵-C₅H₅)Os(PPh₃)₂{N₃C₂(CO₂CH₂CH₃)₂}] (4) was determined by single crystal X-ray analysis.     

Organometallic chemistry of diphosphazanes. Rhodium(I) complexes of RN(PX2)2 (R = C6H5; X = OC6H5, OC6H4Br−p, R = CH3; X = OC6H5)

Reactions of [Rh(COD)Cl]₂ with the ligand RN(PX₂)₂ (1: R = C₆H₅; X = OC₆H₅) give mono- or disubstituted complexes of the type [Rh₂(COD)Cl₂{ν²−C₆H₅N(P(OC₆H₅)₂)₂}] or [RhCl{ν²−C₆H₅ N(P(OC₆H₅)₂)₂ }]₂ depending on the reaction conditions. Reaction of 1 with [Rh(CO)₂Cl]₂ gives the symmetric binuclear complex, [Rh(CO)Cl{μ−C₆H₅N(P(OC₆H₅)₂)₂} ₂, whereas the same reaction with 2 (R = CH₃; X = OC₆H₅) leads to the formation of an asymmetric complex of the type [Rh(CO)(μ−CO)Cl{μ−CH₃N(P(OC₆H₅)₂)₂}₂ containing both terminal and bridging CO groups. Interestingly the reaction of 3 (R = C₆H₅, X = OC₆H₄Br−p with either [Rh(COD)Cl]₂ or [Rh(CO)₂Cl]₂ leads only to the formation of the chlorine bridged binuclear complex, [RhCl{ν²−C₆H₅N(P(OC₆H₄Br−p)₂)₂}]₂. The structural elucidation of the complexes was carried out by elemental analyses, IR and ³¹P NMR spectroscopic data.     

Synthesis, immobilization and catalytic activity of some silylated cyclopentadienyl rhodium(I) complexes

The mixture of isomers of silylated cyclopentadiene derivative C₅H₅CH₂CH₂Si(OMe)₃ (1) has been used for the syntheses of the mononuclear Rh(I) complexes [η⁵-C₅H₄(CH₂)₂Si(OMe)₃]Rh(CO)₂ (3). [η⁵-C₅H₄(CH₂)₂Si(OMe)₃]Rh(COD) (4) and [η⁵-C₅H₄(CH₂)₂Si(OMe)₃]Rh(CO)(PPh₃) (5). Upon entrapment of 3–5 in silica sol-gel matrices, air stable, leach-proof and recyclable catalysts 6–8 resulted. Their catalytic activities in some hydrogenation processes were compared with those of the non-immobilized complexes 3–5, as well as with those of homogeneous and heterogenized non-silylated analogs, 9–14.     

Tin and thallium reagents for transfer of the 1,2-di-tert-butylcyclopentadienyl ligand to transition metals

New tin and thallium reagents capable of transferring the 1,2-di-tert-butylcyclopentadienyl moiety are easily prepared and utilized in furthering the transition metal organometallic chemistry of this intersting ligand. Lithium 1,2-di-tert-butylcyclopentadienide (1) reacts cleanly and selectively with SnClMe₃ to give 2,3-di-tert-butyl-5-trimethylstannyl-1,3-cyclopentadiene (2), which in turn reacts with Re(CO)₅Br to form the half-sandwich complex [Re(η⁵-C₅H₃(1,2-Bu^t)₂)(CO)₃] (3). The reaction between thallium ethoxide and 1,5-ditert-butyl-1,3-cyclopentadiene in hexane affords the excellent cyclopentadienyl transfer reagent, thallium 1,2-di-tert-butylcyclopentadienide (4). The thallium salt reacts with [Ru(COD)Cl₂]_n to give the sandwich complex [Ru(η⁵-C₅H₃(1,2-Bu₂^t)₂)] (5).     

Mono-η complexes of chromium(II) and chromium(0). Electron demanding substituents, structural and spectroscopic data comparisons

Using thermal and photochemical methods a series of new chromium complexes has been prepared: (ν⁶-p-C₆H₄F₂)Cr(CO)₃; (ν⁶-C₆H₅CF₃)Cr(CO)₃; [m-C₆H₄(CF₃)₂]Cr(CO)₃; (ν⁶-C₆H₅F)Cr(CO)₂H(SiCl₃); (ν⁶-C₆H₅F)Cr(CO)₂(SiCl₃)₂; (p-C₆H₄F₂)Cr(CO)₂-H(SiCl₃); (C₆H₅CF₃)Cr(CO)₂H(SiCl₃(p-C₆H₄F₂)Cr(CO)₂(SiCl₃)₂; C₆H₅CF₃)Cr(CO)₂(SiCl₃)₂; [m-C₆H₄(CF₃)₂]Cr(CO)₂-H(SiCl₃); [m-C₆H₄(CF₃)₂]Cr(CO)₂(SiCl₃)₂. Two compounds were structurally characterized by X-ray diffraction. These data combined with IR and ¹H NMR have allowed assessment of some of the electronic and steric effects. The Cr-arene bond is considerably longer in the Cr(II) derivatives than in the Cr(0) species. Also the Cr center, as might be expected, is less electron rich in the Cr(II) dicarbonyl disilyl derivatives. The ν⁶-p-C₆H₄F₂ ligands are slightly folded so that the C---F carbons are moved further away from the Cr center. Comparison of structural and electronic effects is made with a series of similar chromium compounds reported in the literature. These new (arene)Cr(II) derivatives possess more labile ν⁶-arene ligands, which promise a rich chemistry at the chromium center.     

Gold in organic synthesis Part 2. Preparation of benzyl-alkyl and-arylketones via C---C coupling

Reaction of [Au(η²-Ar){CH₂C(O)R}Cl] (Ar=C₆H₄N=N- Ph-₂, R=Me, C₆H₂(OMe)₃-3′,4′,5′; Ar=C₆H₃(N=NC₆H₄Me- 4′)-2, Me-5, R=Me) with PPh₃ and NaClO₄·H₂O (1:2:1) at room temperature, leads to reductive elimination giving [Au(PPh₃)₂]ClO₄ and the corresponding carbon-carbon coupling product ArCH₂C(O)R. A similar process takes place when complexes [Au(η²-Ar){CH₂C(O)R}(PPh₃)Cl] are refluxed in tetrahydrofuran, through elimination of [Au(PPh₃)Cl].     

Synthesis and properties of the dichloro [tetramethyl (trifluoromethyl)cyclopentadienyl]ruthenium dimer: X-ray structure of [M2(η-C5Me4CF3)2Cl2(μ-Cl)2] (M=Ru, Rh)

The reaction of RuCl₃(H₂O), with C₅Me₄CF₃J in refluxing EtOH gives [Ru₂(η⁵-C₅Me₁CF₂)₂ (μ-Cl₂] (20 in 44% yield. Dimer 2 antiferromagnetic (−2J=200 cm¹). The crystal structures of 2 (rhombohedral system, R3 space group, Z=9, R=0.0589) and [Rh₂(η⁵-C₅Me₄CF₃(₂Cl₂(μ-Cl)₂] (3) (rhombohedral system. space group, Z = 9, R = 0.0641) were solved; both complexes have dimeric structures with a trans arrangement of the η⁵-C₅Me₄CF₄ rings. Comparison of the geometry of 2 and 3 with those of the corresponding η⁵-C₅Me₅ complexes shows that lowering the ring symmetry causes significant distortion of the M₂(μ-Cl)₂ moiety. The analysis of the MCl₃ fragment conformations in 2 and 3 and in the η⁵-C₅ME₅ analogues shows that they are correlated with the M---M distances. The Cl atoms are displaced by Br on reaction of 2 with KBr in MeOH to give the diamagnetic dimer [Ru₂(η⁵-C₅Me₄CF₃)₂Br₂ (μ-Br₂] (4). Complex 2 reacts with O₂ in CH₂Cl₂ solution at ambient temperature to form a mixture of isomeric η⁶-fulvene dimers [Ru₂(η⁶-C₅Me₃CF₃ = CH₂)₂Cl₂(μ-Cl)₂] (5). Reactions of 5 with CO and allyl chloride give Ru(η⁵-C₅Me₃CF₃CH₂Cl)(CO)₂Cl (6) and Ru(η⁵-C₅Me₃CF₃CF₃CH₂Cl)(η³-C₃H₅)Cl₂ (7) respectively.     

Alkene rotation in [Ru(η-C5H5) (L2) (η-alkene][CF3SO3] with L2 = iPr- or pTol-diazabutadiene. X-ray crystal structure of [Ru(η-C5H5(pTol-DAB) (η-ethene][CF3SO3]

Reaction of RuCl(η⁵-C₅H₅(pTol-DAB) with AgOTf (OTf = CF₃SO₃) in CH₂Cl₂ or THF and subsequent addition of L′ (L′ = ethene (a), dimethyl fumarate (b), fumaronitrile (c) or CO (d) led to the ionic complexes [Ru(η⁵-C₅H₅)(pTol-DAB)(L′)][OTf] 2a, 2b and 2d and [Ru(η⁵-C₅H₅)(pTol-DAB)(fumarontrile-N)][OTf] 5c. With the use of resonance Raman spectroscopy, the intense absorption bands of the complexes have been assigned to MLCT transitions to the iPr-DAB ligand. The X-ray structure determination of [Ru(η⁵-C₅H₅)(pTol-DAB)(η²-ethene)][CF₃SO₃] (2a) has been carried out. Crystal data for 2a: monoclinic, space group P2₁/n with A = 10.840(1), b = 16.639(1), C = 14.463(2) Å, β = 109.6(1)°, V = 2465.6(5) ų, Z = 4. Complex 2a has a piano stool structure, with the Cp ring η⁵-bonded, the pTol-DAB ligand σN, σN′ bonded (Ru-N distances 2.052(4) and 2.055(4) Å), and the ethene η²-bonded to the ruthenium center (Ru-C distances 2.217(9) and 2.206(8) Å). The C = C bond of the ethene is almost coplanar with the plane of the Cp ring, and the angle between the plane of the Cp ring and the double of the ethene is 1.8(0.2)°. The reaction of [RuCl(η⁵-C₅H₅)(PPh)₃ with AgOTf and ligands L′ = a and d led to [Ru(η⁵-C₅H₅)(PPh₃)₂(L′)]OTf] (3a) and (3d), respectively. By variable temperature NMR spectroscopy the rottional barrier of ethene (a), dimethyl fumarate (b and fumaronitrile (c) in complexes [Ru(η⁵-C₅H₅)(L₂)(η²-alkene][OTf] with L₂ = iPr-DAB (a, 1b, 1c), pTol-DAB (2a, 2b) and L = PPh₃ (3a) was determined. For 1a, 1b and 2b the barrier is 41.5±0.5, 62±1 and 59±1 kJ mol⁻¹, respectively. The intermediate exchange could not be reached for 1c, and the ΔG^# was estimated to be at least 61 kJ mol⁻. For 2a and 3a the slow exchange could not be reached. The rotational barrier for 2a was estimated to be 40 kJ mol⁻. The rotational barier for methyl propiolate (HC≡CC(O)OCH₃) (k) in complex [Ru(η⁵-C₅H₅)(iPr-DAB) η²-HC≡CC(O)OCH₃)][OTf] (1k) is 45.3±0.2 kJ mol⁻¹. The collected data show that the barrier of rotational of the alkene in complexes 1a, 2a, 1b, 2b and 1c does not correlate with the strength of the metal-alkene interaction in the ground state.     

Cis- and trans-titanium complexes with doubly silyl-bridged dicyclopentadienyl ligands: molecular structure of [(TiCl)2(μ-O){(SiMe2)2(η-C5H3)2}]2(μ-O)2

The reaction of TiCl₄ with Li₂[(SiMe₂)₂(η⁵-C₅H₃)₂] in toluene at room temperature afforded a mixture of cis- and trans-[(TiCl₃)₂{(SiMe₂)₂(η⁵-C₅H₃)₂}] in a molar ratio of 1/2 after recrystallization. The complex trans-[(TiCl₃)₂{(SiMe₂)₂(η⁵-C₅H₃)₂}] was hydrolyzed immediately by the addition of water to THF solutions to give trans-[(TiCl₂)₂(μ-O){(SiMe₂)₂(η⁵-C₅H₃)₂}] as a solid insoluble in all organic solvents, whereas hydrolysis of cis-[(TiCl₃)₂{(SiMe₂)₂(η⁵-C₅H₃)₂}] under different conditions led to the dinuclear μ-oxo complex cis-[(TiCl₂)₂)(μ-O){(SiMe₂)₂(η⁵-C₅H₃)₂}] and two oxo complexes of the same stoichiometry [(TiCl)₂(μ-O){(SiMe₂)₂(η⁵-C₅H₃)₂}]₂(μ-O)₂ as crystalline solids. Alkylation of cis- and trans-[(TiCl₃)₂{(SiMe₂)₂(η⁵-C₅H₃)₂}] with MgCIMe led respectively to the partially alkylated cis-[(TiMe₂Cl)₂{(SiMe₂)₂(η⁵-C₅H₃)₂}] and the totally alkylated trans-[(TiMe₃)₂{(SiMe₂)₂(η⁵-C₅H₃)₂}] compounds. The crystal and molecular structure of the tetranuclear oxo complex [(TiCl)₂(μ-O){(SiMe₂)₂(η⁵-C₅H₃)₂}]₂(μ-O)₂ was determined by X-ray diffraction.     

Chelated alkyl halide manganese complexes (η:η-C5H4CH2CH2X)Mn(CO)2 from photolysis of (η-C5H4CH2CH2X)Mn(CO)3

Manganese tricarbonyl complexes (η⁵-C₅H₄CH₂CH₂Br)Mn(CO)₃ (3) and (η⁵-C₅H₄CH₂CH₂I)Mn(CO)₃ (4), with an alkyl halide side chain attached to the cyclopentadienyl ligand, were synthesized as possible precursors to chelated alkyl halide manganese complexes. Photolysis of 3 or 4 in toluene, hexane or acetone-d₆ resulted in CO dissociation and intramolecular coordination of the alkyl halide to manganese to produce (η⁵:η¹-C₅H₄CH₂CH₂Br)Mn(CO)₂ (5) and (η⁵:η¹-C₅H₄CH₂CH₂I)Mn(CO)₂ (6). Low temperature NMR and IR spectroscopy established the structures of 5 and 6. Photolysis of 3 in a glass matrix at 91 K demonstrated CO release from manganese. Low temperature NMR spectroscopy established that the coordinated alkyl halide complexes are stable to approximately −20°C.     

Ligand induced P---H bond formation and a comparison of the reactivity of two isomers of the carbonyl hydride [Pt2(μ-PBu2)2(H)(CO)(PBu2H)]CF3SO3

The Pt₂ ^(II) isomeric terminal hydrides [(CO)(H)Pt(μ-PBu^t ₂)₂Pt(PBu^t ₂H)]CF₃SO₃ (1a), and [(CO)Pt(μ-PBu^t ₂)₂Pt(PBu^t ₂H)(H)]CF₃SO₃ (1b), react rapidly with 1 atm of carbon monoxide to give the same mixture of two isomers of the Pt₂ ^(I) dicarbonyl [Pt₂(μ-PBu^t ₂)(CO)₂(PBu^t ₂H)₂]CF₃SO₃ (3-Pt); the solid state structure of the isomer bearing the carbonyl ligands pseudo-trans to the bridging phosphide was solved by X-ray diffraction. A remarkable difference was instead found between the reactivity of 1a and 1b towards carbon disulfide or isoprene. In both cases 1b reacts slowly to afford [Pt₂(μ-PBu^t ₂)(μ,η²,η²-CS₂)(PBu^t ₂H)₂]CF₃SO₃ (4-Pt), and [Pt₂(μ-PBu^t ₂)(μ,η²,η²-isoprene) (PBu^t ₂H)₂]CF₃SO₃ (6-Pt), respectively. In the same experimental conditions, 1a is totally inert. A common mechanism, proceeding through the preassociation of the incoming ligand followed by the P---H bond formation between one of the bridging P atoms and the hydride ligand, has been suggested for these reactions.     

The preparation, characterisation and low temperature X-ray structure of Ru6(η-μ4-CO)2(CO)13(η6-C6Me6)

The new organometallic cluster (η²-μ₄-CO)₂(CO)₁₃(η⁶-C₆Me₆) has been prepared by the thermolysis of Ru₃(CO)₁₂ with hexamethylbenzene in octane and characterised by a single crystal X-ray diffraction study. It is isostructural with the known cluster Ru₆(η²-μ₄-CO)₂(CO)₁₃(η⁶-C₆H₃Me₃) and the metal core constitutnts the same tetrahedral Ru₄ unit with two edge-bridging Ru atoms. The mesitylene derivative has been shown to undergo rearrangement to afford the octahedral carbido cluster Ru₆C(CO)₁₄(η⁶-C₆H₃Me₃), but this conversion is not observed for the new hexamethylbenzene derivative.     

Gallium(III) organophosphonate adducts with the bidentate amines 2,2′-bipyridyl and 1,10-phenanthroline

A number of gallium(III) organophosphonates form adducts with the bidentate amines 2,2′-bipyridyl and 1,10-phenanthroline. These adducts contain a 1:2:1 molar ratio of metal/phosphorus/amine and have the proposed formulations Ga(O₃PR)(O₂P(OH)R)(C₁₀H₈N₂)·H₂O and Ga(O₃PR)(O₂P(OH)R)(C₁₂H₈N₂)·H₂O (where R=CH₃, C₆H₅ and CH₂C₆H₅; C₁₀H₈N₂ is 2,2′-bipyridyl and C₁₂H₈N₂ is 1,10-phenanthroline). Unlike the parent gallium(III) organophosphonates, which conform to the general formula Ga(OH)(O₃PR)·xH₂O (x=0 or 1), the amine adducts lack the hydroxo group, but contain the organophosphonate ligand in the partially as well as fully deprotonated forms. All compounds were isolated from aqueous solutions as monohydrates, with the exception of the bipyridyl adduct of gallium(III) phenylphosphonate, which is anhydrous. TGA measurements suggest that for the hydrates, the water molecule is not coordinated to the metal. The bipyridyl adducts of gallium(III) phenylphosphonate and gallium(III) methylphosphonate, like the parent gallium(III) organophosphonates, are very likely layered, as indicated by the powder XRD patterns. In contrast, the corresponding phenanthroline adducts are non-layered, and both the bipyridyl and phenanthroline adducts of gallium(III) benzylphosphonate are amorphous solids. FTIR, powder XRD, TGA, XPS, solid state ³¹P/¹³C MAS-NMR and BET surface area data are presented and discussed.     

The interaction of Lewis acidic boron derivatives with Re(CO)5−nH(PMe3)n complexes

Lewis acid adducts of the hydrides cis- and trans-Re(CO)(PMe₃)₄H (1) and (2), mer-Re(CO)₂(PMe₃)₃H (3), fac-Re(CO)₂(PMe₃)₃H (4) and trans-Re(CO)₃(PMe₃)₂H (5) were studied with BH₃ and 9-borabicyclo[3,3,1] norbonane (BBNH). Using BH₃·THF and (BBNH)₂ 1 and 2 afforded Re(CO)(PMe₃)₃(η²-BH₄) (6) and Re(CO)(PMe₃)₃(η²-BBNH₂) (7) as stable and isolable products. VT IR studies established for the reaction to 7 that BBNH first attaches in a pre-equilibrium to the O_CO atom of 1 or 2. At higher temperatures ReH adduct formation occurs with instantaneous transformation to 7 and elimination of PMe₃·BBNH. In a similar way, the hydrides 3 and 4 were converted with BH₃·THF and (BBNH)₂ to yield the stable complexes Re(CO)₂(PMe₃)₂(η²-BH₄) (8) and Re(CO)₂(PMe₃)₂(η²-BBNH₂) (9). The intermediacy of the η¹-BH₄ adducts mer-/fac-Re(CO)₂(PMe₃)₃(η¹-BH₄) was confirmed by VT ¹H, ³¹P NMR and VT IR experiments. The conversion of 5 with BH₃·THF led to equilibria with adducts at the O_CO terminus in trans position to H and with H_Re as revealed by VT IR studies. Temperature dependent ³¹P equilibrium studies allowed to calculate ΔH=−4.9 kcal mol⁻¹ and ΔS=+0.034 e.u. for this reaction. These adducts could not be isolated. Compound 5 does not react with (BBNH)₂ even at elevated temperatures. DFT calculations were carried out to support the structures of the BH₃ adducts of 5. In addition a vibrational analysis helped to unravel the IR band assignments of the involved compounds. DFT calculations on 8 confirmed its C_2v structure. X-ray diffraction studies were carried out on single crystals of 6 and 7.     

C60-fullerenides of ytterbium and lutetium

Cp^#₂Yb (Cp^#=C₅H₄(CH₂)₂NMe₂) has been obtained by reaction of YbI₂(THF)₂ with 2 equiv. of C₅H₄(CH₂CH₂NMe₂)K in THF. The X-ray structure analysis shows a bent structure with intramolecular coordination of both nitrogen atoms to ytterbium. The reaction of C₆₀-fullerene with Cp^#₂Yb leads to the formation of the fullerenide derivative [Cp^#₂Yb]₂C₆₀, which shows an ESR signal in the solid state and in THF solution at room temperature (solid: ΔH = 50 G, G = 1.9992; solution: ΔH = 10 G, G = 2.0001) and a magnetic moment of 3.6 BM. The lutetium fullerenides CpLu(C₆₀)(DME) (3) and Cp^*Lu(C₆₀)(DME)(C₆H₅CH₃) (4), (Cp = η⁵−C₅H₅, Cp^* = η⁵−C₅Me₅), were obtained by reaction of C₆₀ with CpLu(C₁₀H₈) (DME) and Cp^*Lu(C₁₀H₈) (DME) in toluene. Both complexes are paramagnetic (μ_eff = 1.4 and 0.9 BM) and exhibit temperature-dependent ESR signals (293 K: g = 1.992 and 2.0002 respectively).     

On the reduction behaviour of 2-methoxyethyl and 2-methylthioethyl substituted zirconocene dichlorides: crystal structure of (η,σ-C5Me4CH2CH2S)2Zr

A reduction of previously reported 2-methoxyethyl and 2-methylthioethyl functionalized zirconocenedichlorides (η⁵-C₅Me₄CH₂CH₂EMe)(η⁵-C₅Me₅)(ZrCl₂ (E = O, S) and (η⁵-C₅Me₄CH₂CH₂EMe)(η⁵-C₅Me₄CH₂CH₂E′Me)ZrCl₂ (E = O, S; E′ = O, S) with Mg/Hg in THF leads unexpectedly to the products of O---Me and S---Me bond cleavage (η⁵,σ-C₅Me₄CH₂CH₂E)(η⁵-C₅Me₅)ZrMe (E = O, S), (η⁵,σ-C₅Me₄CH₂CH₂E)(η⁵-C₅Me₄CH₂CH₂E′Me)ZrMe (E = O, S; E′ = O), and (η⁵,σ-C₅Me₄CH₂CH₂S)₂Zr respectively. The crystal structure of (η⁵,σ-C₅Me₄CH₂CH₂S)₂Zr was established by X-ray analysis. At that same time the reduction of (ηsu5-C_{5Me4CH2CH2EMe)(η⁵-C5Me5)ZrCl2 (E> = O, S)} under 1 atm of CO gives either only the dicarbonyl derivative (η⁵-C₅Me₄CH₂CH₂EMe) (η⁵-C₆Me₅)Zr(CO)₂ (E = O) or a complex mixture of products (E = S).     

Studies on the reactivity of organometallic Ru-, Rh- and Os-pta complexes with DNA model compounds

The reactions of arene–metal complexes (arene = p-cymene, benzene or pentamethylcyclopentadienyl, metal = Ru, Rh or Os), including 1,3,5-triaza-7-phosphatricyclo-[3.3.1.1]decanephosphine (pta) and chloro co-ligands, with 9-methylguanine, adenine, and a series of nucleosides were studied in water to ascertain the binding modes. The products were characterized by NMR spectroscopy and electrospray ionization mass spectrometry (ESI-MS). Tandem mass spectrometry was found to provide excellent information on preferential binding sites. In general, the N7 position on guanine (the most basic site) was found to be the preferred donor atom for coordination to the metal complexes. The X-ray structures of the precursor complexes, [(η⁵-C₁₀H₁₅)RhCl(pta-Me)₂]Cl₂, [(η⁶-C₁₀H₁₄)OsCl(pta)₂]Cl, and [(η⁶-C₆H₆)OsCl₂(CH₃CN)], are also reported.     

Synthesis, solution behaviour and molecular structures of 16-electron closo-2-(Ph3P)-1-N,2-[μ-(η-CH2CH=Ch2)]-1-N-(σ-CH2CH=CH2)-2,1- RhCB10H10, the first η-olefinic monocarbon metallacarborane

The first η²-olefinic monocarbon metallacarbone closo-2-(Ph₃P)-1-N,2-[μ-(η²-CH₂CH=Ch₂)]-1-N-(σ-CH₂CH=CH₂)-2,1- RhCB₁₀H₁₀ has been prepared by the reaction of the dimeric anion {[Ph₃PRhB₁₀H₁₀CNH₂]₂-μ-H}⁻[PPN]⁺ with allyl bromide and characterized by a combination of spectroscopic methods and a single-crystal X-ray diffraction study. The variable temperature ¹H and ¹³C NMR studies revealed the fluxional behavior of the η²-olefinic complex in CD₂Cl₂ solution which is associated with the allyl side-chain exchange process.