Immobilisation of cyclodextrin glucanotransferase from <Emphasis Type="Italic">Bacillus circulans</Emphasis> ATCC 21783 on purified seasand

Cyclodextrin glucanotransferase (CGTase) from Bacillus circulans (ATCC 21783) was immobilised on a silica-based support: purified seasand. Although adsorption of 98% was achieved, considerable desorption was encountered. This problem was minimised by crosslinking the adsorbed enzyme with glutaraldehyde. The immobilised enzyme after crosslinking could be used repeatedly for cyclodextrin (CD) production in a batch process. The activity retention was 80% at the end of the eighth cycle. The immobilised enzyme showed a shift in the pH optimum towards the alkaline side and also an improvement in the pH stability compared to the free enzyme. It catalysed the formation of β-CD as a major product. A significant amount of α-CD production was also observed on prolonged incubation. Electronic Publication     

Enantioselective behavior of lipases from <Emphasis Type="Italic">Aspergillus niger</Emphasis> immobilized in different supports

Considering the extraordinary microbial diversity and importance of fungi as enzyme producers, the search for new biocatalysts with special characteristics and possible applications in biocatalysis is of great interest. Here, we report the performance in the resolution of racemic ibuprofen of a native enantioselective lipase from Aspergillus niger, free and immobilized in five types of support (Accurel EP-100, Amberlite MB-1, Celite, Montmorillonite K10 and Silica gel). Amberlite MB-1 was found to be the best support, with a conversion of 38.2%, enantiomeric excess of 50.7% and enantiomeric ratio (E value) of 19 in 72 h of reaction. After a thorough optimization of several parameters, the E value of the immobilized Aspergillus niger lipase was increased (E = 23) in a shorter reaction period (48 h) at 35°C. Moreover, the immobilized Aspergillus niger lipase maintained an esterification activity of at least 80% after 8 months of storage at 4°C and could be reused at least six times.     

Enzyme precipitate coatings of lipase on polymer nanofibers

Lipase (LP) was immobilized on electrospun and ethanol-dispersed polystyrene–poly(styrene-co-maleic anhydride) (PS–PSMA) nanofibers (EtOH-NF) in the form of enzyme precipitate coatings (EPCs). LP precipitate coatings (EPCs-LP) were prepared in a three-step process, consisting of covalent attachment, LP precipitation, and crosslinking of precipitated LPs onto the covalently attached LPs via glutaraldehyde treatment. The LP precipitation was performed by adding various concentrations of ammonium sulfate (20–50%, w/v). EPCs-LP improved the LP activity and stability when compared to covalently attached LPs (CA-LP) and the enzyme coatings of LPs (EC-LP) without the LP precipitation. For example, the use of 40% (w/v) ammonium sulfate resulted in EPC40-LP with the highest activity, which was 4.0 and 3.6 times higher than those of CA-LP and EC-LP, respectively. After 165-day incubation under rigorous shaking at 200 rpm, the residual activities of EPC50-LP were 0.5 μM/min mg of EtOH-NF, representing 113 and 75 times higher than those of CA-LP and EC-LP, respectively. When LP was partially purified via a simple ammonium sulfate precipitation and dialysis, both activities and stabilities of EC-LP and EPC-LP could be marginally improved. It is anticipated that the improved LP activity and stability in the form of EPCs would allow for their potential applications in various bioconversion processes such as biodiesel production and ibuprofen resolution.     

Properties of free and immobilised lipase from Burkholderia cepacia in organic media

The purified lipase from Burkholderia cepacia was immobilised on a porous polypropylene support and its biocatalytic properties were compared with those of the free enzyme in organic media. For both lipase preparations, the rate of p-nitrophenyl ester hydrolysis in n-heptane was not restricted by mass transfer limitations. The immobilisation changed neither the temperature at which the reaction rate was maximal, nor the activation energy of the reaction. The enzyme stability was slightly decreased (1.3-fold) upon immobilisation. Moreover, the immobilised enzyme displayed fewer variations of activity with fatty acid chain length. Interestingly, for all the different p-nitrophenyl esters used, the immobilised enzyme was more active (from 5.8- to 18.9-fold) than the free enzyme. Therefore, it would be very useful to use B. cepacia lipase immobilised onto porous polypropylene for applications in organic media, as it displayed high activities on a larger range of substrates. Received: 8 February 1999 / Received revision: 19 March 1999 / Accepted: 20 March 1999     

Calcium alginate entrapment of the yeast Rhodosporidium toruloides for the kinetic resolution of 1,2-epoxyoctane

Resting cells of the yeast Rhodosporidium toruloides (UOFS Y-0471) were immobilised in calcium alginate beads for the enantioselective kinetic resolution of racemic-1,2-epoxyoctane. The initial activity exhibited by immobilised cells was almost 50% lower than that of the free counterpart but was extremely stable when compared to the free cells. The concentration of the immobilised biomass had no effect on apparent enzyme activity but did lead to a decrease in single cell activity. An increase in both the alginate and CaCl₂ concentrations used for bead preparation led to a decrease in enzyme stability. An increase in the alginate concentration led to an increase in bead diameter. The stoichiometric equation for cross-linking of alginate was only obeyed when CaCl₂ concentrations higher than 0.4 M were utilised for bead preparation.     

Reversible immobilization of uricase on conductive polyaniline brushes grafted on polyacrylonitrile film

Polyacrylonitrile film (PAN) surfaces were modified with chemical polymerization of conductive polyaniline (PANI) in the presence of potassium dichromate as an oxidizing agent. The conductive films were used for immobilization of uricase. The surface resistance of the conductive film in this work was found to be 0.97 kΩ/cm. The maximum amount of immobilized enzyme on conductive film containing 2.4% PANI was about 216 μg/cm². The optimum pH for free and immobilized enzymes was observed at 7.0 and 7.5, respectively. The K _m values for free and immobilized uricase were found to be 94 and 138 μM, respectively. V _max values were calculated as 1.87 and 1.63 U/mg protein for the free and immobilized enzymes, respectively. Immobilized uricase exhibited ~68% of its original activity even after 2 months of storage at 4 °C while the free enzyme lost its initial activity within 4 weeks.     

Cross-linked enzyme aggregates (CLEAs) with controlled particles: Application to Candida rugosa lipase

Aggregation agent type and concentration, lipase and glutaraldehyde concentration, and pH are able to affect the formation of cross-linked lipase. The carrier-free immobilized Candida rugosa lipase with a particle size of 40–50 μm showed higher activity than that of the lipase with other particle sizes. The carrier-free immobilized C. rugosa lipase can keep 86% original lipase activity (0.018 g g⁻¹ min⁻¹). The enantioselectivity of the carrier-free immobilized lipase (23.3) was about 1.8 times as much as that of the native lipase (13.0) in kinetic resolution of ibuprofen racemic mixture.     

Sustainable preparation of a novel glycerol-free biofuel by using pig pancreatic lipase: Partial 1,3-regiospecific alcoholysis of sunflower oil

The preparation of a novel biofuel denoted as Ecodiesel-100 from the partial 1,3-regiospecific alcoholysis of sunflower oil is reported. Pig pancreatic lipase (PPL) was employed in the reaction as both free and immobilised enzyme on sepiolite. The resulting biofuel is composed of fatty acid ethyl esters and monoglycerides (FAEE/MG) blended in a molar relation 2/1. The novel biofuel has similar physico-chemical properties compared to those of conventional biodiesel and/or petrodiesel, avoiding the production of glycerine as by-product.The biocatalyst was found to be strongly fixed to the inorganic support (87.5%). Nevertheless, the efficiency of the immobilised enzyme was reduced to less than half (42%) compared to that of the free PPL. Quantitative conversions of triglycerides and high yields to FAEE were obtained under mild reaction conditions (20–80 °C, oil/alcohol 2/1 v:v ratio and PPL 0.01–0.1% w/w of total substrate). The immobilised enzyme showed a remarkable stability as well as a great reusability (more than 11 successive reuses) without a significant loss of its initial catalytic activity. Both immobilised and free enzyme exhibited the same reaction mechanism, according to the coincidental results in the Arrhenius parameters (Ln A and E_a). The immobilised PPL was found to be very suitable for the continuous production of biofuel due to its facile recyclability from the reaction mixture.     

Development of magnetically separable immobilized lipase by using cellulose derivatives and their application in enantioselective esterification of ibuprofen

Highly active, stable, and magnetically separable immobilized enzymes were developed using carboxymethyl cellulose (CMC) and diethylaminoethyl cellulose DEAE-C; hereafter designated "DEAE" as supporting materials. Iron oxide nanoparticles penetrated the micropores of the supporting materials, rendering them magnetically separable. Lipase (LP) was immobilized on the surface of the supporting materials by using cross-linked enzyme aggregation (CLEA) by glutaraldehyde. The activity of enzyme aggregates coated on DEAE was approximately 2 times higher than that of enzyme aggregates coated on CMC. This is explained by the fact that enzyme aggregates with amine residues are more efficient than those with carboxyl residues. After a 96-h enantioselective ibuprofen esterification reaction, 6% ibuprofen propyl ester was produced from the racemic mixture of ibuprofen by using DEAE-LP, and 2.8% using CMC-LP.     

Lactonohydrolase-catalyzed optical resolution of pantoyl lactone: selection of a potent enzyme producer and optimization of culture and reaction conditions for practical resolution

A fungal lactonohydrolase catalyzes the stereospecific hydrolysis of the intramolecular ester bond of d-pantoyl lactone and is useful for optical resolution of racemic pantoyl lactone. High activity of this stereospecific hydrolysis reaction was found in several filamentous fungi belonging to the genera Fusarium, Gibberella and Cylindrocarpon through the screening in a variety of microorganisms. Fusarium oxysporum AKU 3702 showed high productivity of the enzyme and the cells containing the enzyme could be used repeatedly for this hydrolysis reaction. On incubation with the mycelia of this fungus, which had been cultivated in 3% glycerol, 0.5% Polypepton, 0.5% yeast extract and 0.5% corn steep liquor, pH 6.0, 46.0% of the racemic pantoyl lactone (700 mg/ml) was hydrolyzed and the optical purity of the pantoic acid formed was 96% enantiomeric excess for the d-isomer.     

Arthrobacter sp. lipase immobilization for improvement in stability and enantioselectivity

Arthrobacter sp. lipase (ABL, MTCC no. 5125) is being recognized as an efficient enzyme for the resolution of drugs and their intermediates. The immobilization of ABL on various matrices for its enantioselectivity, stability, and reusability has been studied. Immobilization by covalent bonding on sepharose and silica afforded a maximum of 380 and 40 IU/g activity, respectively, whereas sol–gel entrapment provided a maximum of 150 IU/g activity in dry powder. The immobilized enzyme displayed excellent stability in the pH range of 4–10 and even at higher temperature, i.e., 50–60°C, compared to free enzyme, which is unstable under extreme conditions. The resolution of racemic auxiliaries like 1-phenyl ethanol and an intermediate of antidepressant drug fluoxetine, i.e., ethyl 3-hydroxy-3-phenylpropanoate alkyl acylates, provided exclusively R-(+) products (∼99% ee, E=646 and 473), compared to cell free extract/whole cells which gave a product with ∼96% ee (E=106 and 150). The repeated use (ten times) of covalently immobilized and entrapped ABL resulted in no loss in activity, thus demonstrating its prospects for commercial applications.     

Immobilization of epoxide hydrolase from Aspergillus niger onto DEAE-cellulose: enzymatic properties and application for the enantioselective resolution of a racemic epoxide

Recombinant epoxide hydrolase (EH) from Aspergillus niger can be a very promising tool for the resolution of various racemic epoxides by enantioselective hydrolysis. The enzyme was successfully immobilized by ionic adsorption onto DEAE-cellulose (99% yield, 70% of retention activity). The temperature for maximal activity (40 °C) and the activation energy (38.8 kJ/mol) were similar for both the immobilized and free EHs, whereas the optimal pH was about one unit less for the immobilized enzyme. Thermal stability was also affected by immobilization; the immobilized enzyme appeared to be slightly less stable than the free one. However, a gram-scale resolution of racemic para-chlorostyrene oxide (pCSO) was successfully carried out in a repeated batch reactor, operated for seven cycles. Furthermore, using a very high substrate concentration of 2 M (306 g/L), i.e. biphasic conditions, the resolution of 3 g of pCSO was also achieved in a repeated batch reactor using approximately 300 mg of immobilized EH, corresponding to less than 3 mg of the enzymatic powder.     

Covalent immobilization of β-1,4-glucosidase from <Emphasis Type="Italic">Agaricus arvensis</Emphasis> onto functionalized silicon oxide nanoparticles

An efficient β-1,4-glucosidase (BGL) secreting strain, Agaricus arvensis, was isolated and identified. The relative molecular weight of the purified A. arvensis BGL was 98 kDa, as determined by sodium dodecylsulfate polyacrylamide gel electrophoresis, or 780 kDa by size exclusion chromatography, indicating that the enzyme is an octamer. Using a crude enzyme preparation, A. arvensis BGL was covalently immobilized onto functionalized silicon oxide nanoparticles with an immobilization efficiency of 158%. The apparent V _max (k _cat) values of free and immobilized BGL under standard assay conditions were 3,028 U mg protein⁻¹ (4,945 s⁻¹) and 3,347 U mg protein⁻¹ (5,466 s⁻¹), respectively. The immobilized BGL showed a higher optimum temperature and improved thermostability as compared to the free enzyme. The half-life at 65 °C showed a 288-fold improvement over the free BGL. After 25 cycles, the immobilized enzyme still retained 95% of the original activity, thus demonstrating its prospects for commercial applications. High specific activity, high immobilization efficiency, improved stability, and reusability of A. arvensis BGL make this enzyme of potential interest in a number of industrial applications.     

Congo Red attached monosize poly(HEMA-co-MMA) microspheres for use in reversible enzyme immobilisation

Monosize and non-porous poly(2-hydroxyethylmethacrylate-co-methylmethacrylate) (poly(HEMA-co-MMA)), microspheres were prepared by dispersion polymerisation of HEMA and MMA in an ethanol–water medium in the presence of an initiator (α,α′-azobisisobutyronitrile, AIBN). An affinity dye, i.e. Congo Red (CR) was attached covalently and then Fe³⁺ ions were incorporated. The poly(HEMA-co-MMA)-CR attached and poly(HEMA-co-MMA)-CR-Fe³⁺ incorporated microspheres were used in the immobilisation of glucose oxidase (GOD) via adsorption. The adsorption capacities of these microspheres were determined by varying the concentration of GOD in the adsorption medium. GOD adsorption capacities of the Fe³⁺ incorporated microspheres (165 mg g⁻¹) was greater than that of the dye-attached microspheres (126 mg g⁻¹). The non-specific adsorption of the GOD on the poly(HEMA-co-MMA) microspheres was negligible. The K_m values for both immobilised poly(HEMA-co-MMA)-CR-GOD (7.2) and poly(HEMA-co-MMA)-CR-Fe³⁺-GOD (6.8) were higher than that of the free enzyme (6.6 mM). Optimum reaction pH was 5.0 for free and 7.0 for both immobilised preparations. Optimum reaction temperature of the adsorbed enzymes was 10 °C higher than that of the free enzyme and was significantly broader. After 10 successive uses the retained activity of the adsorbed enzyme was 93%. It was observed that enzyme could be repeatedly adsorbed and desorbed on the CR attached poly(HEMA-co-MMA) microspheres without significant loss in adsorption capacity or enzyme activity.     

Enhancement of the activity and enantioselectivity of lipase in organic systems by immobilization onto low-cost support

Lipase from Arthrobacter sp. was immobilized onto low-cost diatomite materials using different protocols for the resolution of 4-hydroxy-3-methyl-2-(2-propenyl)-2-cyclopenten-1-one (HMPC) by asymmetric acylation. The support surface was grafted various functional groups including methacryloxypropyl, vinyl, octyl, dodecyl and γ-(aminopropyl)-glutaraldehyde. These modifications resulted in various mechanisms during the immobilization and thus introduced different characteristics to the prepared lipases. The interfacially adsorbed lipase onto dodecyl-modified support exhibited both higher activity and stability among these immobilized preparations. The modified enzyme-aggregate coating method was performed based on interfacial adsorption in our work, and the characteristics of this immobilized lipase were investigated and compared with those by cross-linking and interfacial adsorption methods. It was shown that the enzyme-aggregate coated lipase yielded the highest activity with a recovered activity of 8.5-fold of the free enzyme, and the highest operational stability with 85% of initial activity remained after 10 recycles. Excellent enantioselectivity (E ≥ 400, with e.e. = 99% of S-HMPC) was obtained for most lipase preparations in our paper (E = 85 for the free enzyme).     

Enzymatic kinetic resolution of racemic ibuprofen: past,present and future

This review is a journey concerning the investigations of the kinetic resolution of racemic ibuprofen for the last 20 years. The relevancy of the pharmacological uses of the S(?+?) enantiomer along with its higher cost compared with racemic profen are the driving forces of a variety of scientific research studies addressing the enzymatic resolution of ibuprofen through enantiomeric esterification using lipases as biocatalysts. Lipases of fungal sources such as Candida rugosa, Rhizomucor miehei and the lipase B of Candida antarctica have been extensively studied both in homogeneous and heterogeneous (immobilized on solid supports) processes. In this context, the various alcohols and organic co-solvents frequently used in the esterification of racemic ibuprofen are summarized and discussed in this review. Moreover, recent investigations using membranes as reactors coupled with the separation of the desired product and microfluidic devices are presented. Finally, some guidelines about future perspectives regarding the technology of the kinetic resolution of profens and research niches are given.     

<Emphasis Type="Italic">In Vivo</Emphasis> Assessment of Parenteral Formulations of Oligo(3-Hydroxybutyric Acid) Conjugates with the Model Compound Ibuprofen

Polymer-drug conjugates have gained significant attention as pro-drugs releasing an active substance as a result of enzymatic hydrolysis in physiological environment. In this study, a conjugate of 3-hydroxybutyric acid oligomers with a carboxylic acid group-bearing model drug (ibuprofen) was evaluated in vivo as a potential pro-drug for parenteral administration. Two different formulations, an oily solution and an o/w emulsion were prepared and administered intramuscularly (IM) to rabbits in a dose corresponding to 40 mg of ibuprofen/kilogramme. The concentration of ibuprofen in blood plasma was analysed by HPLC, following solid–phase extraction and using indometacin as internal standard (detection limit, 0.05 μg/ml). No significant differences in the pharmacokinetic parameters (C _max, T _max, AUC) were observed between the two tested formulations of the 3-hydroxybutyric acid conjugate. In comparison to the non-conjugated drug in oily solution, the relative bioavailability of ibuprofen conjugates from oily solution, and o/w emulsion was reduced to 17% and 10%, respectively. The 3-hydroxybutyric acid formulations released the active substance over a significantly extended period of time with ibuprofen still being detectable 24 h post-injection, whereas the free compound was almost completely eliminated as early as 6 h after administration. The conjugates remained in a muscle tissue for a prolonged time and can hence be considered as sustained release systems for carboxylic acid derivatives.     

Immobilization of Candida rugosa lipase on sporopollenin from Lycopodium clavatum

Sporopollenin is a natural polymer obtained from Lycopodium clavatum, which is highly stable with constant chemical structure and has high resistant capacity to chemical attack. In this study, immobilization of lipase from Candida rugosa (CRL) on sporopollenin by adsorption method is reported for the first time. Besides this, the enzyme adsorption capacity, activity and thermal stability of immobilized enzyme have also been investigated. It has been observed that under the optimum conditions (Spo-E_(0.3)), the specific activity of the immobilized lipase on the sporopollenin by adsorption was 16.3 U/mg protein, which is 0.46 times less than that of the free lipase (35.6 U/mg protein). The pH and temperature of immobilized enzyme were optimized, which were 6.0 and 40 °C respectively. Kinetic parameters V_max and K_m were also determined for the immobilized lipase. It was observed that there is an increase of the K_m value (7.54 mM) and a decrease of the V_max value (145.0 U/mg-protein) comparing with that of the free lipase.     

Purification, immobilization and characterization of linoleic acid isomerase on modified palygorskite

Linoleic acid isomerase from Lactobacillus delbrueckii subsp. bulgaricus 1.1480 was purified by DEAE ion-exchange chromatography and gel filtration chromatography. An overall 5.1% yield and purification of 93-fold were obtained. The molecular weight of the purified protein was ~41 kDa which was analyzed by SDS-PAGE. The purified enzyme was immobilized on palygorskite modified with 3-aminopropyltriethoxysilane. The immobilized enzyme showed an activity of 82 U/g. The optimal temperature and pH for the activity of the free enzyme were 30 °C and pH 6.5, respectively; whereas those for the immobilized enzyme were 35 °C and pH 7.0, respectively. The immobilized enzyme was more stable than the free enzyme at 30–60 °C, and the operational stability result showed that more than 85% of its initial activity was retained after incubation for 3 h. The K _m and V _max values of the immobilized enzyme were found to be 0.0619 mmol l⁻¹ and 0.147 mmol h⁻¹ mg⁻¹, respectively. The immobilized enzyme had high operational stability and retained high enzymatic activity after seven cycles of reuse at 37 °C.     

Amino acid-mediated aldolase immobilisation for enhanced catalysis and thermostability

To improve the properties of the immobilised 2-deoxy-d-ribose-5-phosphate aldolase (DERA), unreacted functional groups on support surface were blocked with amino acids. The relative activities of the immobilised enzyme were 144.7 and 141.9% when the post-immobilisation modification was done with Arg and Phe, respectively. The residual activity of immobilised DERA after heating at 60 °C for 120 min was 65.1% when Phe and Val were used as the blocking amino acids, a 2.0- and 2.87-fold increase over that of the immobilised (no post-immobilisation blocking) and free DERA. Immobilised DERA maintained maximal activity in 2-deoxyribose-5-phosphate (DR5P) synthesis up to 600 mM of acetaldehyde, which was much higher than the amount of acetaldehyde tolerated by free enzyme (300 mM). This superior resistance to high acetaldehyde concentrations would accelerate the DR5P reaction by shifting the reaction equilibrium towards the product. The results from this study suggest that the novel immobilised DERA may be useful for industrial applications.