Simultaneous visualization of the actin plate and new cell partition membrane during cytokinesis in the brown alga Sphacelaria rigidula (Sphacelariales,Phaeophyceae)

In many brown algae, cytokinesis is accomplished through the centrifugal expansion of the membrane structure formed by the fusion of Golgi vesicles and flat cisternae. In contrast, it has been reported that cytokinesis in Sphacelaria rigidula progresses centripetally by adding Golgi vesicles and flat cisternae to cleaving furrows of the plasma membrane. The reason why this cytokinetic pattern was observed only in Sphacelaria species is unknown. In either cytokinesis pattern, a plate-like actin structure (the actin plate) coincides with the cytokinetic plane between the daughter nuclei. However, it is unclear how the actin plate is related to cytokinesis progression. In this study, we re-examined cytokinesis in the apical cells of S. rigidula using transmission electron microscopy. Double staining of the actin plate and the developing membrane was followed by fluorescence microscopy analysis to determine the relationship between these two formations. The results showed that cytokinesis in S. rigidula, as in many brown algae, was completed by centrifugal growth of the new cell partition membrane. A furrow of the plasma membrane was observed at the beginning of cytokinesis; however, further invagination did not occur. The actin plate arose at the center of the cytokinetic plane before membrane fusion and extended parallel to the expansion of the new cell partition membrane. When cytokinesis was slow due to insufficient Golgi vesicle supply to the cytokinetic plane in the cells under brefeldin A treatment, the extension of the actin plate was also suspended. In this study, the spatiotemporal relationship between the occurrence and expansion of the actin plate and the new cell partition membrane was revealed. These observations indicate that the actin plate might promote membrane fusion or lead to the growth of a new cell partition membrane.     

Cytokinesis in brown algae: studies of asymmetric division in fucoid zygotes

Summary. The mechanism of cytokinesis was investigated during the first asymmetric division in fucoid zygotes. A plate of actin assembled midway between daughter nuclei where microtubules interdigitated and defined the cytokinetic plane. A membrane was then deposited in islands throughout the cytokinetic plane; the islands eventually fused into a continuous partition membrane and cell plate material was deposited in the intermembrane space. All of these structures matured from the center of the cell outward (centrifugal maturation). Pharmacological agents were used to investigate the roles of microtubules, actin, and secretion in cytokinesis. The findings indicate a mechanism of cytokinesis that may be unique to the brown algae.Correspondence and reprints: Department of Biology, University of Utah, 257 South 1400 East, Salt Lake City, UT 84112-0840, U.S.A.     

Visualization of actin polymerization and depolymerization cycles during polyamine-induced cytokinesis in living Amoeba proteus

Summary Microinjection of spermine induces cytokinesis of Amoeba proteus. Within 30–60 s after spermine injection cells form one, or less commonly, two cleavage furrows and within the following 4–10 min the constrictions are completed. The resulting nucleated cell parts show normal streaming and locomotion, whereas the non-nucleated cell parts remain stationary and later degenerate.The intracellular distribution of fully polymerization-competent fluorescently labelled muscle actin was followed by image intensification. Double injection experiments initially using labelled actin and 30 min later spermine revealed a ring-like structure of enhanced fluorescence corresponding to the constricting cleavage furrow. Immediately after cleavage was completed, the ring disappeared. Electron microscopy of cells fixed during spermine-induced cytokinesis showed numerous well aligned actin and myosin filaments in the developing cleavage furrow. These filaments are a specialized manifestation of the cell cortex.The results demonstrate that cycles of actin and myosin polymerization and depolymerization and the parallel alignment of preexisting filaments (crosslinking) represent a basic mechanism in the generation of the motive force during cytokinesis.     

Sequential Assembly of Myosin II, an IQGAP-like Protein, and Filamentous Actin to a Ring Structure Involved in Budding Yeast Cytokinesis

We have identified a Saccharomyces cerevisiae protein, Cyk1p, that exhibits sequence similarity to the mammalian IQGAPs. Gene disruption of Cyk1p results in a failure in cytokinesis without affecting other events in the cell cycle. Cyk1p is diffused throughout most of the cell cycle but localizes to a ring structure at the mother–bud junction after the initiation of anaphase. This ring contains filamentous actin and Myo1p, a myosin II homologue. In vivo observation with green fluorescent protein–tagged Myo1p showed that the ring decreases drastically in size during cell division and therefore may be contractile. These results indicate that cytokinesis in budding yeast is likely to involve an actomyosin-based contractile ring. The assembly of this ring occurs in temporally distinct steps: Myo1p localizes to a ring that overlaps the septins at the G1-S transition slightly before bud emergence; Cyk1p and actin then accumulate in this ring after the activation of the Cdc15 pathway late in mitosis. The localization of myosin is abolished by a mutation in Cdc12p, implicating a role for the septin filaments in the assembly of the actomyosin ring. The accumulation of actin in the cytokinetic ring was not observed in cells depleted of Cyk1p, suggesting that Cyk1p plays a role in the recruitment of actin filaments, perhaps through a filament-binding activity similar to that demonstrated for mammalian IQGAPs.     

A possible role for actin dots in the formation of the contractile ring in the ultra-micro algaCyanidium caldarium RK-1

Summary In the primitive red algaCyanidium caldarium RK-1, cytokinesis is controlled by a simple contractile ring, as in animal cells. To clarify the mechanism of formation of the contractile ring, we isolated actin genes and performed an immunocytological study.C. caldarium RK-1 has two actin genes encoding proteins with the same sequence of 377 amino acids. The primary structure indicated that the actin molecules ofC. caldarium RK-1 are typical, despite the fact that the organism is considered to be phylogenetically primitive. We prepared antiserum against aC. caldarium RK-1 actin fusion protein and indirect immunofluorescence staining was performed. In interphase cells, many actin dots were observed in the cytoplasm but none at the future cleavage plane. Prior to cytokinesis, some of these dots appeared and became aligned along the equatorial plane. At the same time, a thin immature contractile ring was observed to appear to be formed by connection of the aligned actin dots. This immature contractile ring thickened to nearly its maximum size by the time cytokinesis began. The formation of the contractile ring seemed to be a result of de novo assembly of actin monomers, rather than a result of the accumulation and bundling of pre-existing actin filaments. During the constriction of the contractile ring, no actin dots were observed in the cytoplasm. These observations suggest that actin dots are responsible for the formation of the contractile ring, but are not necessary for its disintegration. Furthermore, immunogold localization specific for actin revealed at electron microscopy level that fine filaments running just beneath the cleavage furrow are, in fact, actin filaments.Abbreviations ORF open reading frame - IPTG isopropyl--D(–)-thiogalactopyranoside - SDS-PAGE sodium dodecyl sulphate-poly-acrylamide gel electrophoresis - DAPI 4,6-diamidino-2-phenylindole     

Cyk3, a novel SH3-domain protein, affects cytokinesis in yeast

Cytokinesis requires the wholesale reorganization of the cytoskeleton and secretion to complete the division of one cell into two. In the budding yeast Saccharomyces cerevisiae, the IQGAP-related protein Iqg1 (Cyk1) promotes cytokinetic actin ring formation and is required for cytokinesis and viability [1-3]. As the actin ring is not essential for cytokinesis or viability, Iqg1 must act by another mechanism [4]. To uncover this mechanism, a screen for high-copy suppressors of the iqg1 lethal phenotype was performed. CYK3 suppressed the requirement for IQG1 in viability and cytokinesis without restoration of the actin ring, demonstrating that CYK3 promotes cytokinesis through an actomyosin-ring-independent pathway. CYK3 encodes a novel SH3-domain protein that was found in association with the actin ring and the mother-bud neck. cyk3 null cells had misshapen mother-bud necks and were deficient in cytokinesis. In the cyk3 null strain, actin rearrangements associated with cytokinesis appeared normal, suggesting that the phenotype reflects a defect in secretory targeting or septal synthesis. Deletion of either cyk3 or hof1 alone results in a mild cytokinetic phenotype [5-7], but deletion of both genes resulted in lethality and a complete cytokinetic block, suggesting overlapping function. Thus, Cyk3 appears to be important for cytokinesis and acts potentially downstream of Iqg1.     

Formins filter modified actin subunits during processive elongation

Fission yeast cells reject actin subunits tagged with a fluorescent protein from the cytokinetic contractile ring, so cytokinesis fails and the cells die when the native actin gene is replaced by GFP-actin. The lack of a fluorescent actin probe has prevented a detailed study of actin filament dynamics in contractile rings, and left open questions regarding the mechanism of cytokinesis. To incorporate fluorescent actin into the contractile ring to study its dynamics, we introduced the coding sequence for a tetracysteine motif (FLNCCPGCCMEP) at 10 locations in the fission yeast actin gene and expressed the mutant proteins from the native actin locus in diploid cells with wild-type actin on the other chromosome. We labeled these tagged actins inside live cells with the FlAsH reagent. Cells incorporated some of these labeled actins into actin patches at sites of endocytosis, where Arp2/3 complex nucleates all of the actin filaments. However, the cells did not incorporate any of the FlAsH-actins into the contractile ring. Therefore, formin Cdc12p rejects actin subunits with a tag of ~2 kDa, illustrating the stringent structural requirements for this formin to promote the elongation of actin filament barbed ends as it moves processively along the end of a growing filament.     

EFFECT OF LATRUNCULIN B AND BREFELDIN A ON CYTOKINESIS IN THE BROWN ALGA SCYTOSIPHON LOMENTARIA (SCYTOSIPHONALES,PHAEOPHYCEAE)1

In zygotes of the brown alga Scytosiphon lomentaria (Lyngb.) Link, cytokinesis proceeds by growth of membranous sacs, which are formed by fusion of Golgi vesicles and flat cisternae accumulated at the future cytokinetic plane. It has been reported that depolymerization of actin filaments by latrunculin B does not inhibit mitosis. However, this molecule prevents the formation of the actin plate, which appears at the region of intermingled microtubules from each centrosome just before and during cytokinesis. In this study, zygotes treated with latrunculin B were observed using EM. Remarkably, this reagent inhibited the formation of flat cisternae. Golgi vesicles gathered around the midzone between the two daughter nuclei and fused with the plasma membrane there. As a result, the plasma membrane invaginated, in a complicated manner, into the cytoplasm. However, these invaginations of the plasma membrane never produced a continuous partition membrane. The ultrastructure of zygotes treated with brefeldin A, which prevents Golgi‐mediated secretion, was also examined. Flat cisternae appeared at the future cytokinetic plane, and a new cell partition membrane was formed. However, the partition membrane became thick, because it was filled with amorphous material rather than the normal rigid fibrous material. These results suggested that actin is involved in the formation of flat cisternae, where it is necessary for completion of the new cell partition membrane, and that Golgi vesicles may play an important role in the deposition of cell wall material.     

Formin Cdc12’s specific actin assembly properties are tailored for cytokinesis in fission yeast

Formins generate unbranched actin filaments by a conserved, processive actin assembly mechanism. Most organisms express multiple formin isoforms that mediate distinct cellular processes and facilitate actin filament polymerization by significantly different rates, but how these actin assembly differences correlate to cellular activity is unclear. We used a computational model of fission yeast cytokinetic ring assembly to test the hypothesis that particular actin assembly properties help tailor formins for specific cellular roles. Simulations run in different actin filament nucleation and elongation conditions revealed that variations in formin’s nucleation efficiency critically impact both the probability and timing of contractile ring formation. To probe the physiological importance of nucleation efficiency, we engineered fission yeast formin chimera strains in which the FH1-FH2 actin assembly domains of full-length cytokinesis formin Cdc12 were replaced with the FH1-FH2 domains from functionally and evolutionarily diverse formins with significantly different actin assembly properties. Although Cdc12 chimeras generally support life in fission yeast, quantitative live-cell imaging revealed a range of cytokinesis defects from mild to severe. In agreement with the computational model, chimeras whose nucleation efficiencies are least similar to Cdc12 exhibit more severe cytokinesis defects, specifically in the rate of contractile ring assembly. Together, our computational and experimental results suggest that fission yeast cytokinesis is ideally mediated by a formin with properly tailored actin assembly parameters.     

Formin Cdc12’s specific actin assembly properties are tailored for cytokinesis in fission yeast

Formins generate unbranched actin filaments by a conserved, processive actin assembly mechanism. Most organisms express multiple formin isoforms that mediate distinct cellular processes and facilitate actin filament polymerization by significantly different rates, but how these actin assembly differences correlate to cellular activity is unclear. We used a computational model of fission yeast cytokinetic ring assembly to test the hypothesis that particular actin assembly properties help tailor formins for specific cellular roles. Simulations run in different actin filament nucleation and elongation conditions revealed that variations in formin’s nucleation efficiency critically impact both the probability and timing of contractile ring formation. To probe the physiological importance of nucleation efficiency, we engineered fission yeast formin chimera strains in which the FH1-FH2 actin assembly domains of full-length cytokinesis formin Cdc12 were replaced with the FH1-FH2 domains from functionally and evolutionarily diverse formins with significantly different actin assembly properties. Although Cdc12 chimeras generally support life in fission yeast, quantitative live-cell imaging revealed a range of cytokinesis defects from mild to severe. In agreement with the computational model, chimeras whose nucleation efficiencies are least similar to Cdc12 exhibit more severe cytokinesis defects, specifically in the rate of contractile ring assembly. Together, our computational and experimental results suggest that fission yeast cytokinesis is ideally mediated by a formin with properly tailored actin assembly parameters.     

Displacement of the mitotic apparatuses by centrifugation reveals cortical actin organization during cytokinesis in cultured tobacco BY-2 cells

In plant cytokinesis, actin is thought to be crucial in cell plate guidance to the cortical division zone (CDZ), but its organization and function are not fully understood. To elucidate actin organization during cytokinesis, we employed an experimental system, in which the mitotic apparatus is displaced and separated from the CDZ by centrifugation and observed using a global–local live imaging microscope that enabled us to record behavior of actin filaments in the CDZ and the whole cell division process in parallel. In this system, returning movement of the cytokinetic apparatus in cultured-tobacco BY-2 cells occurs, and there is an advantage to observe actin organization clearly during the cytokinetic phase because more space was available between the CDZ and the distantly formed phragmoplast. Actin cables were clearly observed between the CDZ and the phragmoplast in BY-2 cells expressing GFP-fimbrin after centrifugation. Both the CDZ and the edge of the expanding phragmoplast had actin bulges. Using live-cell imaging including the global–local live imaging microscopy, we found actin filaments started to accumulate at the actin-depleted zone when cell plate expansion started even in the cell whose cell plate failed to reach the CDZ. These results suggest that specific accumulation of actin filaments at the CDZ and the appearance of actin cables between the CDZ and the phragmoplast during cell plate formation play important roles in the guidance of cell plate edges to the CDZ.     

Rho1 directs formin-mediated actin ring assembly during budding yeast cytokinesis

In eukaryotic cells, dynamic rearrangement of the actin cytoskeleton is critical for cell division. In the yeast Saccharomyces cerevisiae, three main structures constitute the actin cytoskeleton: cortical actin patches, cytoplasmic actin cables, and the actin-based cytokinetic ring. The conserved Arp2/3 complex and a WASP-family protein mediate actin patch formation, whereas the yeast formins (Bni1 and Bnr1) promote assembly of actin cables. However, the mechanism of actin ring formation is currently unclear. Here, we show that actin filaments are required for cytokinesis in S. cerevisiae, and that the actin ring is a highly dynamic structure that undergoes constant turnover. Assembly of the actin ring requires the formin-like proteins and profilin, but is not Arp2/3-mediated. Furthermore, the formin-dependent actin ring assembly pathway is regulated by the Rho-type GTPase Rho1 but not Cdc42. Finally, we show that the formins are not required for localization of Cyk1/Iqg1, an IQGAP-like protein previously shown to be required for actin ring formation, suggesting that formin-like proteins and Cyk1 act synergistically but independently in assembly of the actin ring.     

A microtubule-dependent zone of active RhoA during cleavage plane specification

Cytokinesis in animal cells results from the assembly and constriction of a circumferential array of actin filaments and myosin-2. Microtubules of the mitotic apparatus determine the position at which the cytokinetic actomyosin array forms, but the molecular mechanisms by which they do so remain unknown. The small GTPase RhoA has previously been implicated in cytokinesis. Using four-dimensional microscopy and a probe for active RhoA, we show that active RhoA concentrates in a precisely bounded zone before cytokinesis and is independent of actin assembly. Cytokinetic RhoA activity zones are common to four echinoderm species, the vertebrate Xenopus laevis, and the highly asymmetric cytokinesis accompanying meiosis. Microtubules direct the formation and placement of the RhoA activity zone, and the zone is repositioned after physical spindle displacement. We conclude that microtubules specify the cytokinetic apparatus via a dynamic zone of local RhoA activity.     

Three-dimensional arrangement of F-actin in the contractile ring of fission yeast

The contractile ring, which is required for cytokinesis in animal and yeast cells, consists mainly of actin filaments. Here, we investigate the directionality of the filaments in fission yeast using myosin S1 decoration and electron microscopy. The contractile ring is composed of around 1,000 to 2,000 filaments each around 0.6 mum in length. During the early stages of cytokinesis, the ring consists of two semicircular populations of parallel filaments of opposite directionality. At later stages, before contraction, the ring filaments show mixed directionality. We consider that the ring is initially assembled from a single site in the division plane and that filaments subsequently rearrange before contraction initiates.     

Drosophila citron kinase is required for the final steps of cytokinesis

The mechanisms underlying completion of cytokinesis are still poorly understood. Here, we show that the Drosophila orthologue of mammalian Citron kinases is essential for the final events of the cytokinetic process. Flies bearing mutations in the Drosophila citron kinase (dck) gene were defective in both neuroblast and spermatocyte cytokinesis. In both cell types, early cytokinetic events such as central spindle assembly and contractile ring formation were completely normal. Moreover, cytokinetic rings constricted normally, leading to complete furrow ingression. However late telophases of both cell types displayed persistent midbodies associated with disorganized F actin and anillin structures. Similar defects were observed in dck RNA interference (RNAi) telophases, which, in addition to abnormal F actin and anillin rings, also displayed aberrant membrane protrusions at the cleavage site. Together, these results indicate that mutations in the dck gene result in morphologically abnormal intercellular bridges and in delayed resolution of these structures, suggesting that the wild-type function of dck is required for abscission at the end of cytokinesis. The phenotype of Dck-depleted cells is different from those observed in most Drosophila cytokinesis mutants but extraordinarily similar to that caused by anillin RNAi, suggesting that Dck and anillin are in the same pathway for completion of cytokinesis.     

Arrangement of actin filaments and myosin-like filaments in the contractile ring and of actin-like filaments in the mitotic spindle of dividing HeLa cells

We used a glutaraldehyde-tannic acid-saponin fixative to improve the preservation of actin filaments in dividing HeLa cells during preparation for thin sectioning. The contractile ring in the cleavage furrow is composed of a parallel array of actin filaments that circle the equator. We show that many of these actin filaments are arranged in small bundles. These bundles consist of about 25 filaments throughout cytokinesis. For comparison, filopodia on these cells have about 23 actin filaments packed at a higher density than the filaments in the contractile ring bundles. Some of the contractile ring actin filaments appear to radiate out from electron-dense sites on the plasma membrane. The contractile ring also has a large number of short filaments 13 nm in diameter that closely resemble filaments formed from purified human cytoplasmic myosin. These thick filaments are aligned circumferentially and interdigitate with the actin filaments, as expected for a sliding filament mechanism of tension generation. There are no long actin filaments in the mitotic spindle, but there are a large number (400 to 1000 per μm ³) of very short filaments identical in appearance to actin filaments in other parts of these cells. These short filaments may account for the reported staining of the mitotic spindle with fluorescent antibodies to actin and with fluorescent myosin fragments.     

The formins Cdc12 and For3 cooperate during contractile ring assembly in cytokinesis

Both de novo–assembled actin filaments at the division site and existing filaments recruited by directional cortical transport contribute to contractile ring formation during cytokinesis. However, it is unknown which source is more important. Here, we show that fission yeast formin For3 is responsible for node condensation into clumps in the absence of formin Cdc12. For3 localization at the division site depended on the F-BAR protein Cdc15, and for3 deletion was synthetic lethal with mutations that cause defects in contractile ring formation. For3 became essential in cells expressing N-terminal truncations of Cdc12, which were more active in actin assembly but depended on actin filaments for localization to the division site. In tetrad fluorescence microscopy, double mutants of for3 deletion and cdc12 truncations were severely defective in contractile ring assembly and constriction, although cortical transport of actin filaments was normal. Together, these data indicate that different formins cooperate in cytokinesis and that de novo actin assembly at the division site is predominant for contractile ring formation.     

Mechanism of the formation of contractile ring in dividing cultured animal cells. I. Recruitment of preexisting actin filaments into the cleavage furrow

Cytokinesis of animal cells involves the formation of the circumferential actin filament bundle (contractile ring) along the equatorial plane. To analyze the assembly mechanism of the contractile ring, we microinjected a small amount of rhodamine-labeled phalloidin (rh-pha) or rhodamine-labeled actin (rh-actin) into dividing normal rat kidney cells. rh-pha was microinjected during prometaphase or metaphase to label actin filaments that were present at that stage. As mitosis proceeded into anaphase, the labeled filaments became associated with the cortex of the cell. During cytokinesis, rh-pha was depleted from polar regions and became highly concentrated into the equatorial region. The distribution of total actin filaments, as revealed by staining the whole cell with fluorescein phalloidin, showed a much less pronounced difference between the polar and the equatorial regions. The sites of de novo assembly of actin filaments during the formation of the contractile ring were determined by microinjecting rh-actin shortly before cytokinesis, and then extracting and fixing the cell during mid-cytokinesis. Injected rhodamine actin was only slightly concentrated in the contractile ring, as compared to the distribution of total actin filaments. Our results indicate that preexisting actin filaments, probably through movement and reorganization, are used preferentially for the formation of the contractile ring. De novo assembly of filaments, on the other hand, appears to take place preferentially outside the cleavage furrow.     

Studies on the plant cytoskeleton using miniprotoplasts of tobacco BY-2 cells

Vacuoles in plant cells can be eliminated by centrifugation of protoplasts through a density gradient. In this review, properties of evacuolated protoplasts, named ‘miniprotoplasts’, and the significant roles in plant cytoskeleton studies are described. Miniprotoplasts, prepared from tobacco BY-2 cells whose cell-cycle had been synchronized at late anaphase, continued to divide to form two daughter cells. In the presence of cytochalasin B cytokinetic cleavage was enhanced, suggesting a role of actin filaments in plant cytokinesis. In the cytoplasmic extract of miniprotoplasts both tubulin and actin could be polymerized to form microtubules (MTs) and actin filaments (AFs), respectively. A purification method for tubulin, actin and related proteins was developed using the extract. To investigate the interaction between cortical microtubules and the plasma membrane, an experimental system in which MTs were reconstructed on membrane ghosts was developed by combination of membrane ghosts and the extract.     

Aip1 Promotes Actin Filament Severing by Cofilin and Regulates Constriction of the Cytokinetic Contractile Ring

Aip1 (actin interacting protein 1) is ubiquitous in eukaryotic organisms, where it cooperates with cofilin to disassemble actin filaments, but neither its mechanism of action nor its biological functions have been clear. We purified both fission yeast and human Aip1 and investigated their biochemical activities with or without cofilin. Both types of Aip1 bind actin filaments with micromolar affinities and weakly nucleate actin polymerization. Aip1 increases up to 12-fold the rate that high concentrations of yeast or human cofilin sever actin filaments, most likely by competing with cofilin for binding to the side of actin filaments, reducing the occupancy of the filaments by cofilin to a range favorable for severing. Aip1 does not cap the barbed ends of filaments severed by cofilin. Fission yeast lacking Aip1 are viable and assemble cytokinetic contractile rings normally, but rings in these Δaip1 cells accumulate 30% less myosin II. Further, these mutant cells initiate the ingression of cleavage furrows earlier than normal, shortening the stage of cytokinetic ring maturation by 50%. The Δaip1 mutation has negative genetic interactions with deletion mutations of both capping protein subunits and cofilin mutations with severing defects, but no genetic interaction with deletion of coronin.