Surface Plasmon Enhancement at a Liquid–Metal–Liquid Interface

Herein, we report the first experimental demonstration of surface plasmon enhancement at a liquid–metal–liquid interface using a pseudo-Kretschmann geometry. Pumping gold nanoparticle clusters at the interface of a p-xylene–water mixture, we were able to measure a fluorescence enhancement of three orders of magnitude in Rose Bengal at an excitation wavelength of 532 nm. The observed increase is due to the local electric field enhancement and the reduction of the fluorescence lifetime of dye molecules in the close vicinity of the metal surface. Theoretical modeling using the T-matrix method of the electric field intensity enhancement of emulated surfaces supports the experimental results. This new approach will open a new road for the study of dynamic systems using plasmonics.     

Controlling Liquid–Liquid Phase Separation of Cold-Adapted Crystallin Proteins from the Antarctic Toothfish

Liquid–liquid phase separation (LLPS) of proteins is important to a variety of biological processes both functional and deleterious, including the formation of membraneless organelles, molecular condensations that sequester or release molecules in response to stimuli, and the early stages of disease-related protein aggregation. In the protein-rich, crowded environment of the eye lens, LLPS manifests as cold cataract. We characterize the LLPS behavior of six structural γ-crystallins from the eye lens of the Antarctic toothfish Dissostichus mawsoni, whose intact lenses resist cold cataract in subzero waters. Phase separation of these proteins is not strongly correlated with thermal stability, aggregation propensity, or cross-species chaperone protection from heat denaturation. Instead, LLPS is driven by protein–protein interactions involving charged residues. The critical temperature of the phase transition can be tuned over a wide temperature range by selective substitution of surface residues, suggesting general principles for controlling this phenomenon, even in compactly folded proteins.     

Near-Infrared Metal-Enhanced Fluorescence Using a Liquid–Liquid Droplet Micromixer in a Disposable Poly(Methyl Methacrylate) Microchip

Solution-based metal-enhanced fluorescence of near-infrared fluorophores in a poly(methyl methacrylate) microchip is studied. A liquid–liquid droplet micromixer is used for rapid mixing of fluorophores with silver nanoparticles while maintaining discrete packets of known analytes for reproducible quantitative analysis. Nanoparticle aggregation within the microchip is controlled by individually adjusting salt concentration, colloid concentration, and mixing efficiency. Results identify an optimal salt concentration for aggregate formation and enhanced fluorescence, while the impacts of colloid concentration and mixing efficiency increase linearly, suggesting the possibility of further enhancement. Fluorescence enhancements of 35-fold were achieved on a microfluidics device using metal-enhanced fluorescence in a discrete solution-based system with exposure times of only 50 ms.     

Development of Dispersive Liquid–Liquid Microextraction Based on Solidification of Floating Organic Drop for the Determination of Trace Nickel

A liquid-phase microextraction technique was developed using dispersive liquid-liquid microextraction based on solidification of floating organic drop combined with flame atomic absorption spectrometry, for the extraction and determination of trace amounts of nickel in water samples. Microextraction efficiency factors, such as the type and volume of extraction and dispersive solvents, pH, extraction time, the chelating agent amount, and ionic strength, were investigated and optimized. Under optimum conditions, the calibration graph was linear in the range of 4.23-250?μg?L(-1) with a detection limit of 1.27?μg?L(-1). The relative standard deviation for ten replicate measurements of 10 and 100?μg?L(-1) of nickel were 3.21% and 2.55%, respectively. The proposed method was assessed through the analysis of certified reference water or recovery experiments.     

Destruction of Enteric Bacteria in Liquid Egg with β-Propiolactone

Liquid whole egg or egg white, inoculated with Escherichia coli 1485, Salmonella senftenberg ATCC 8400, or Salmonella typhimurium 84-I, was treated with concentrations of β-propiolactone ranging from 0.05 to 0.3%. Egg white containing 1 × 10³ to 1 × 10⁶ cells of E. coli 1485 per ml was sterilized in 1 hr at 27 C by lactone concentrations of 0.2 and 0.3%. Egg white containing 1 × 10⁵ cells of S. senftenberg ATCC 8400 per ml was sterilized in 12 hr at 10 C by 0.1% lactone and in 2 to 3 hr by 0.3% lactone at the same temperature.

Liquid whole egg inoculated with 1 × 10⁵ cells of either species of Salmonella was sterilized in 4 to 5 hr at 10 C with 0.2% lactone or in 2 to 3 hr by 0.3% lactone at this temperature. A mild heat treatment of either 15 min at 37 C or 1 min at 55 C markedly shortened the exposure times required for sterilization by β-propiolactone at 10 C.

After disinfection was complete, the lactone-treated liquid whole egg was reinoculated with low cell numbers of either species of Salmonella to determine the presence of residual lactone or toxic products. Liquid whole egg treated with 0.2% lactone would support the growth of salmonellae after 13 to 14 hr at 10 C. A heat treatment of 45 min at 37 C or 10 min at 55 C immediately after addition of 0.2% lactone allowed growth of the salmonellae in the lactone-treated liquid whole egg. No evidence of residual toxicity from the lactone treatment was found.

The amount of lactone needed to prevent the outgrowth of low cell numbers of either strain of Salmonella in liquid whole egg was quantitated. Liquid whole egg containing 0.06 to 0.07% lactone would not support salmonellae growth from inocula of 1 to 10 cells per ml of egg. Lactone concentrations above 0.08% prevented outgrowth of salmonellae inocula of 10 to 200 cells per ml of liquid whole egg.

     

Liquid chromatography–mass spectrometry in forensic and clinical toxicology

This paper reviews liquid chromatographic–mass spectrometric (LC–MS) procedures for the identification and/or quantification of drugs of abuse, therapeutic drugs, poisons and/or their metabolites in biosamples (whole blood, plasma, serum, urine, cerebrospinal fluid, vitreous humor, liver or hair) of humans or animals (cattle, dog, horse, mouse, pig or rat). Papers published from 1995 to early 1997, which are relevant to clinical toxicology, forensic toxicology, doping control or drug metabolism and pharmacokinetics, were taken into consideration. They cover the following analytes: amphetamines, cocaine, lysergide (LSD), opiates, anabolics, antihypertensives, benzodiazepines, cardiac glycosides, corticosteroids, immunosuppressants, neuroleptics, non-steroidal anti-inflammatory drugs (NSAID), opioids, quaternary amines, xanthins, biogenic poisons such as aconitines, aflatoxins, amanitins and nicotine, and pesticides. LC–MS interface types, mass spectral detection modes, sample preparation procedures and chromatographic systems applied in the reviewed papers are discussed. Basic information about the biosample assayed, work-up, LC column, mobile phase, interface type, mass spectral detection mode, and validation data of each procedure is summarized in tables. Examples of typical LC–MS applications are presented.     

Combined Liquid Chromatography–Tandem Mass Spectrometry Analysis of Progesterone Metabolites

Progesterone has a number of important functions throughout the human body. While the roles of progesterone are well known, the possible actions and implications of progesterone metabolites in different tissues remain to be determined. There is a growing body of evidence that these metabolites are not inactive, but can have significant biological effects, as anesthetics, anxiolytics and anticonvulsants. Furthermore, they can facilitate synthesis of myelin components in the peripheral nervous system, have effects on human pregnancy and onset of labour, and have a neuroprotective role. For a better understanding of the functions of progesterone metabolites, improved analytical methods are essential. We have developed a combined liquid chromatography—tandem mass spectrometry (LC-MS/MS) method for detection and quantification of progesterone and 16 progesterone metabolites that has femtomolar sensitivity and good reproducibility in a single chromatographic run. MS/MS analyses were performed in positive mode and under constant electrospray ionization conditions. To increase the sensitivity, all of the transitions were recorded using the Scheduled MRM algorithm. This LC-MS/MS method requires small sample volumes and minimal sample preparation, and there is no need for derivatization. Here, we show the application of this method for evaluation of progesterone metabolism in the HES endometrial cell line. In HES cells, the metabolism of progesterone proceeds mainly to (20S)-20-hydroxy-pregn-4-ene-3-one, (20S)-20-hydroxy-5α-pregnane-3-one and (20S)-5α-pregnane-3α,20-diol. The investigation of possible biological effects of these metabolites on the endometrium is currently undergoing.     

Liquid media development for Heterorhabditis bacteriophora : lipid source and concentration

Lipids are important entomopathogenic nematode nutritional components because they are energy reserves and serve as indicators of nematode quality. The composition and concentration of the media lipid component determine bacterial and nematode yields. Heterorhabditis bacteriophora and its symbiont, Photorhabdus luminescens, were cultured in media containing various lipid sources. As lipid concentration increased from 2.5% to 8.0% (w/v), the final yield and productivity [calculated from the number of infective juveniles (IJ)] increased significantly from 2.1 × 10⁵IJ ml⁻¹ to 2.8 × 10⁵IJ ml⁻¹ (P < 0.05) and from 8.9 × 10⁵IJ l⁻¹ day⁻¹ to 11.8 × 10⁵ IJ l⁻¹day⁻¹ (P < 0.05), respectively. The nematode yield coefficient (IJ per gram of media), however, decreased from 2.8 × 10⁶ to 2.2 × 10⁶ (P < 0.05), while recovery increased from 45.3% to 58.0% (P < 0.05). Bacterial cell mass remained constant at 4.6 mg ml⁻¹ with changing lipid content (P > 0.05). The largest nematode yield (2.8 × 10⁵IJ ml⁻¹) was achieved within 8 days, using a medium containing an 8% (w/v) olive and canola oil (50:50 w/v) combination. Moreover, developmental synchrony was achieved in this medium with 96% infective juveniles. In short, lipid sources rich in mono-unsaturated fatty acids and poor in saturated fatty acids produced optimal nematode growth. Received: 1 May 2000 / Received revision: 17 July 2000 / Accepted: 27 July 2000     

Liquid chromatography–mass spectrometry-based metabolomics for authenticity assessment of fruit juices

High performance liquid chromatography?Cmass spectrometry (HPLC?CMS) technique, employing a hybrid triple quadrupole/linear ion trap (QqQ/LIT) mass analyzer, was used for comprehensive metabolomic fingerprinting of several fruit juices types, prepared from expensive (orange) or relatively low-priced (apple, grapefruit) fruits. Following the automated data mining and pre-treatment step, the suitability of the multivariate HPLC?CMS metabolomic data for authentication, i.e., classification of fruit juice and adulteration detection, was assessed with the use of advanced chemometric tools (principal component analysis, PCA, and linear discrimination analysis, LDA). The LDA classification model, constructed and validated employing a highly variable samples set, was able to reliably detect 15% addition of apple or grapefruit juice to orange juice. In the final stage of this study, high performance liquid chromatography?Cquadrupole?Cquadrupole-time-of-flight mass spectrometry (HPLC?CQqTOFMS) measurements were performed in order to obtain data for identification of pre-selected marker compounds using elemental formula calculation and online databases search.     

Liquid–vapour interface varying the softness and range of the interaction potential

Molecular dynamics simulations in a canonical ensemble were carried out for simple fluids. The inter-particles interaction law is described by the Morse function plus a repulsive term. This kind of combination allows to tune the repulsive term of the interaction function by fitting the range of the attractive well and vice versa. As a relevant result, we show that for an inhomogeneous system the particle softness affects the vapour pressure, the surface tension and also the equilibrium densities of a simple fluid. Lower numerical values for these same properties were obtained by using a more repulsive interaction potential. The differences among these same interfacial properties are bigger when the range of the attractive interaction is longer. The surface tension written in terms of the corresponding critical parameters, such as scaled surface tension, was plotted for different softness degrees. And from this comparison, a unique master curve was not found.     

Angularly Resolved Density Distributions–A Starting Point for Analysis of Liquid Structure

Abstract

We propose that the angular unfolding of atomic density distributions exposes some main features of liquid structure. Examples are the mass and the angular location of major maxima. Such structural features constitute a useful starting point for the analysis of liquid structure. To demonstrate this we have analyzed a molecular dynamics trajectory of an equimolar water-acetonitrile mixture. A new method to characterize the extrema of density distributions is used for the analysis. Using this method we draw some conclusions about different types of hydrogen bonds, their lifetimes, and their associated transition probabilities. We also draw some conclusions about recurrent molecular pair configurations.     

Structure-Property Relationships in Liquid Crystals: Can Modelling do Better than Empiricism?

Abstract

This paper reviews the relationships observed experimentally between the physical properties of liquid crystals and the molecular structures of the constituent molecules, and reports molecular mechanics calculations designed to provide a predictive and interpretative basis for structure/property relationships in liquid crystals. The calculations are of the minimum energy configurations of dimers of interacting liquid crystal molecules, and the geometry of the dimers, relative orientation of molecular dipoles and the extent of parallel correlation are related to liquid crystal properties. A large number of structural types are examined and the results discussed in terms of dipole correlation, apolar angular correlation, chiral twist sense and transition temperatures of liquid crystals.     

Comparative Evaluation of Three Supplements for Helicobacter pylori Growth in Liquid Culture

Helicobacter pylori, a microaerophilic fastidious bacterium, has been cultured on various plating and broth media since its discovery. Although the agar media can be sufficient for the identification, typing, and antibiotic resistance studies, no secretory antigen of H. pylori can be evaluated in such media. Thus, satisfactory growth of H. pylori in liquid culture which is needed for analysis of secretory proteins without the presence of interfering agents is in demand. We assessed the impact of β-cyclodextrin, Fetal Bovine Serum (FBS), and charcoal as supplements for H. pylori growth. Furthermore, we aimed to identify the most favorable supplement that supports the secretion of the dominant secretory protein, vacuolating cytotoxin (VacA). Five clinical strains were cultured on broth media and the growth, viability, morphology, and protein content of each strain were determined. Our results revealed that β-cyclodextrin supports the growth rate, viability, and cell lysate protein content to the extent similar to FBS. Application of β-cyclodextrin is found to postpone spiral to coccoid conversion up to 72 h of incubation. Although FBS supports a higher VacA protein content, presence of interfering macromolecules in FBS questions its utility particularly for purposes of studying extra cellular proteins such as VacA. This study recommends further application of β-cyclodextrin as a culture supplement with the potential capacity in neutralizing toxic compounds and flourishing the secretion of H. pylori proteins without addition of interfering proteins.