Refinement of the structure of protein–RNA complexes by residual dipolar coupling analysis

The main limitation in NMR-determined structures of nucleic acids and their complexes with proteins derives from the elongated, non-globular nature of physiologically important DNA and RNA molecules. Since it is generally not possible to obtain long-range distance constraints between distinct regions of the structure, long-range properties such as bending or kinking at sites of protein recognition cannot be determined accurately nor precisely. Here we show that use of residual dipolar couplings in the refinement of the structure of a protein–RNA complex improves the definition of the long-range properties of the RNA. These features are often an important aspect of molecular recognition and biological function; therefore, their improved definition is of significant value in RNA structural biology.     

Residual dipolar coupling constants and structure determination of large DNA duplexes

Several NMR works have shown that long-range information provided by residual dipolar couplings (RDCs) significantly improve the global structure definition of RNAs and DNAs. Most of these are based on the use of a large set of RDCs, the collect of which requires samples labeled with ¹³C, ¹⁵N, and sometimes, ²H. Here, we carried out torsion-angle dynamics simulations on a non-self complementary DNA fragment of 17 base-pairs, d(GGAAAATATCTAGCAGT).(ACTGCTAGAGATTTTCC). This reproduces the U5 LTR distal end of the HIV-1 cDNA that contains the enzyme integrase binding site. Simulations aimed at evaluating the impact of RDCs on the structure definition of long oligonucleotides, were performed in incorporating (i) nOe-distances at both < 4.5 Å and < 5 Å; (ii) a small set of ¹³C-¹H RDCs, easily detectable at the natural abundance, and (iii) a larger set of RDCs only accessible through the ¹³C labeling of DNAs. Agreement between a target structure and a simulated structure was measured in terms of precision and accuracy. Results allowed to define conditions in which accurate DNA structures can be determined. We confirmed the strong impact of RDCs on the structure determination, and, above all, we found that a small set of RDC constraints (ca. 50) detectable at the natural abundance is sufficient to accurately derive the global and local DNA duplex structures when used in conjunction with nOe-distances < 5 Å.     

Refinement of the solution structure of the heparin-binding domain of vascular endothelial growth factor using residual dipolar couplings

Previous NMR structural studies of the heparin-binding domain of vascular endothelial growth factor (VEGF₁₆₅) revealed a novel fold comprising two subdomains, each containing two disulfide bridges and a short two-stranded antiparallel -sheet. The mutual orientation of the two subdomains was poorly defined by the NMR data. Heteronuclear relaxation data suggested that this disorder resulted from a relative lack of experimental restraints due to the limited size of the interface, rather than inherent high-frequency flexibility. Refinement of the structure using ¹H^N-¹⁵N residual dipolar coupling restraints results in significantly improved definition of the relative subdomain orientations.     

A new approach for applying residual dipolar couplings as restraints in structure elucidation

Residual dipolar couplings are useful global structural restraints. The dipolar couplings define the orientation of a vector with respect to the alignment tensor. Although the size of the alignment tensor can be derived from the distribution of the experimental dipolar couplings, its orientation with respect to the coordinate system of the molecule is unknown at the beginning of structure determination. This causes convergence problems in the simulated annealing process. We therefore propose a protocol that translates dipolar couplings into intervector projection angles, which are independent of the orientation of the alignment tensor with respect to the molecule. These restraints can be used during the whole simulated annealing protocol.     

Evaluation of the influence of anisotropic indirect nuclear spin-spin coupling tensors on effective residual dipolar couplings for model peptides

Residual dipolar couplings (RDCs) observed between nuclear spins in molecules in partially oriented media have become a valuable source of information for NMR spectroscopists seeking to structurally characterize biological macromolecules. Examination of the form of the direct (D) and indirect (J) nuclear spin-spin coupling Hamiltonians indicates that all observed RDCs contain an unknown contribution from the anisotropic part of J (J) in addition to the direct dipolar contribution, D _PQ. Here, we evaluate the influence of J on RDCs through a series of DFT calculations on model peptides. Very small corrections to one-bond RDCs measured between heavy atoms in peptides and proteins are recommended: +0.51% for N-C spin pairs, and +0.45% for C-C spin pairs. The corrections to RDCs involving at least one proton are negligible. This latter point is likely to be equally applicable to nucleic acids and oligosaccharides in addition to peptides and proteins. Finally, the orientations of the J(N, C) and J(C, C) tensors in the molecular framework are reported for glycylglycine.     

Refined structure of a flexible heptasaccharide using 1H-13C and 1H-1H NMR residual dipolar couplings in concert with NOE and long range scalar coupling constants

The heptasaccharide isolated from the cell wall polysaccharide of Streptococcus mitis J22 serves as an important model for the dynamics and conformation of complex polysaccharides, illustrating the nature of flexibility with rigid epitopes joined by flexible hinges. One-bond C-H residual dipolar couplings (¹D_CH) and long-range H-H residual dipolar couplings (ⁿD_HH) were measured for the heptasaccharide in a cetylpyridinium chloride/hexanol/brine lamellar liquid crystal medium. A method is proposed to determine the ⁿD_HH in natural abundance based on a ¹³C resolved ¹H TOCSY pulse sequence previously published to determine the homonuclear scalar couplings. Different methods for interpretation of the ¹D_CH and the ⁿD_HH residual dipolar coupling data obtained were compared and combined with the NOE and long-range H,C and C,C scalar couplings available for this heptasaccharide. A flexible model of the heptasaccharide was determined in which two structurally well-defined regions involving four and two sugar residues, respectively are joined by a flexible hinge which involves two 16 glycosidic linkages.     

Determination of protein global folds using backbone residual dipolar coupling and long-range NOE restraints

We report the determination of the global fold of human ubiquitin using protein backbone NMR residual dipolar coupling and long-range nuclear Overhauser effect (NOE) data as conformational restraints. Specifically, by use of a maximum of three backbone residual dipolar couplings per residue (N_i-H^N _i, N_i-C_i–1, H^N _i - C_i–1) in two tensor frames and only backbone H^N-H^N NOEs, a global fold of ubiquitin can be derived with a backbone root-mean-square deviation of 1.4 Å with respect to the crystal structure. This degree of accuracy is more than adequate for use in databases of structural motifs, and suggests a general approach for the determination of protein global folds using conformational restraints derived only from backbone atoms.     

High-temperature solution NMR structure of TmCsp

Cold shock proteins (Csps) are assumed to play a central role in the regulation of gene expression under cold shock conditions. Acting as single-stranded nucleic acid-binding proteins, they trigger the translation process and are therefore involved in the compensation of the influence of low temperatures (cold shock) upon the cell metabolism. However, it is unknown so far how Csps are switched on and off as a function of temperature. The aim of the present study is the study of possible structural changes responsible for this switching process. (1)H-(15)N HSQC spectra recorded at different temperatures and chemical-shift analysis have indicated subtle conformational changes for the cold-shock protein from the hyperthermophilic bacterium Thermotoga maritima (TmCsp) when the temperature is elevated from 303 K to its physiological temperature (343 K). The three-dimensional structure of TmCsp was determined by nuclear magnetic resonance (NMR) spectroscopy at 343 K to obtain quantitative information concerning these structural changes. By use of residual dipolar couplings, the loss of NOE information at high temperature could be compensated successfully. Most pronounced conformational changes compared with room-temperature conditions are observed for amino acid residues closely neighbored to two characteristic beta-bulges and a well-defined loop region of the protein. Because the residues shown to be responsible for the interaction of TmCsp with single-stranded nucleic acids can almost exclusively be found within these regions, nucleic acid-binding activity might be down-regulated with increasing temperature by the described conformational changes.     

Towards structural genomics of RNA: rapid NMR resonance assignment and simultaneous RNA tertiary structure determination using residual dipolar couplings

We report a new residual dipolar couplings (RDCs) based NMR procedure for rapidly determining RNA tertiary structure demonstrated on a uniformly (15)N/(13)C-labeled 27 nt variant of the trans-activation response element (TAR) RNA from HIV-I. In this procedure, the time-consuming nuclear Overhauser enhancement (NOE)-based sequential assignment step is replaced by a fully automated RDC-based assignment strategy. This approach involves examination of all allowed sequence-specific resonance assignment permutations for best-fit agreement between measured RDCs and coordinates for sub-structures in a target RNA. Using idealized A-form geometries to model Watson-Crick helices and coordinates from a previous X-ray structure to model a hairpin loop in TAR, the best-fit RDC assignment solutions are determined very rapidly (相似文献   

A high-resolution solution structure of a trypanosomatid FYVE domain

FYVE domain proteins play key roles in regulating membrane traffic in eukaryotic cells. The FYVE domain displays a remarkable specificity for the head group of the target lipid, phosphatidylinositol 3-phosphate (PtdIns[3]P). We have identified five putative FYVE domain proteins in the genome of the protozoan parasite Leishmania major, three of which are predicted to contain a functional PtdIns(3)P-binding site. The FYVE domain of one of these proteins, LmFYVE-1, bound PtdIns(3)P in liposome-binding assays and targeted GFP to acidified late endosomes/lysosomes in mammalian cells. The high-resolution solution structure of its N-terminal FYVE domain (LmFYVE-1[1-79]) was solved by nuclear magnetic resonance. Functionally significant clusters of residues of the LmFYVE-1 domain involved in PtdIns(3)P binding and dependence on low pH for tight binding were identified. This structure is the first trypanosomatid membrane trafficking protein to be determined and has been refined to high precision and accuracy using residual dipolar couplings.     

The auto-orientation in high magnetic fields of oxidized cytochrome b562 as source of constraints for solution structure determination

¹⁵N-¹H ¹J couplings were measured at 500 MHz and 800 MHz for ¹⁵N enriched oxidized cytochrome b ₅₆₂ from E. coli. The magnetic field dependence of 70 ¹J values, which could be measured without signal overlap, shows that there is a molecular magnetic anisotropy which provides partial molecular orientation in the magnetic field and, consequently, residual dipolar couplings (rdc). The rdc were used as further constraints to improve the existing structure [Arnesano et al. (1999) Biochemistry, 38, 8657–8670] with a protocol which uses the rhombic anisotropy [Banci et al. (1998) J. Am. Chem. Soc., 120, 12903–12909]. The overall large molecular magnetic anisotropy has been found to be determined by both the low spin iron (III) and the four helix bundle structure magnetic susceptibility anisotropy contributions.     

Measurement of H2'-C2' and H3'-C3' dipolar couplings in RNA molecules

The quality of nucleic acid solution structures can be significantly improved using residual dipolar coupling data. However, many of the one-bond couplings that could be used for this purpose are difficult to measure. Conventional 2D experiments are often unable to reveal one-bond H2-C2 and H3-C3 couplings in large RNA molecules due to spectral overlap. Here we show how to use 3D HCcH-COSY and Relay HCcH-COSY to measure one-bond H2-C2 and H3-C3 couplings which improved the precision of the structures obtained recently for a 42 nucleotide RNA.     

Accurate measurement of residual dipolar couplings in anisotropic phase

The determination of residual dipolar couplings (RDCs) by quantitative J spectroscopy methods such as Heteronuclear Single Quantum Correlation with Phase Encoded Coupling (HSQC-PEC) is prone to systematic errors that may be caused by differential attenuation during the conversion of orthogonal density operator components into observable terms. The attenuation may be caused by miscalibration of radio-frequency pulses and by relaxation effects. A simple method is presented that allows one to remove most of these systematic errors without losses in sensitivity or resolution.     

Refinement of d(GCGAAGC) hairpin structure using one- and two-bond residual dipolar couplings

The structure of the ¹³C,¹⁵N-labeled d(GCGAAGC) hairpin, as determined by NMR spectroscopy and refined using molecular dynamics with NOE-derived distances, torsion angles, and residual dipolar couplings (RDCs), is presented. Although the studied molecule is of small size, it is demonstrated that the incorporation of diminutive RDCs can significantly improve local structure determination of regions undefined by the conventional restraints. Very good correlation between the experimental and back-calculated small one- and two-bond ¹H-¹³C, ¹H-¹⁵N, ¹³C-¹³C and ¹³C-¹⁵N coupling constants has been attained. The final structures clearly show typical features of the miniloop architecture. The structure is discussed in context of the extraordinary stability of the d(GCGAAGC) hairpin, which originates from a complex interplay between the aromatic base stacking and hydrogen bonding interactions.     

Overcoming the problems associated with poor spectra quality of the protein kinase Byr2 using residual dipolar couplings

For the Ras-binding domain of the protein kinase Byr2, only a limited number of NOE contacts could be initially assigned unambiguously, as the quality of the NOESY spectra was too poor. However, the use of residual (1)H-(15)N dipolar couplings in the beginning of the structure determination process allows to overcome this problem. We used a three-step recipe for this procedure. A previously unknown structure could be calculated reasonably well with only a limited number of unambiguously assigned NOE contacts.     

Observation of residual dipolar couplings in short peptides

Residual dipolar couplings provide information on the orientation of individual bond vectors with respect to a unique set of molecular axes. We report that short peptides from 2 to 15 amino acids in length of arbitrary sequence exhibit a modest range of residual dipolar couplings when aligned in either strained polyacrylamide gels or alkyl-PEG bicelles. The absence of significant line broadening in gels suggests peptides align predominantly through steric interactions with the polyacrylamide matrix. However, broadening of NMR lines for a subset of residues aligned in bicelles indicates some peptides bind weakly to these lipid disks, yet a weak negative correlation between the couplings measured in gels and bicelles is consistent with steric hindrance playing a role in both media. The observation of dipolar couplings for peptides of length 10-15 suggests the statistical segment lengths of polypeptide chains must often be >10-15 residues, with data from denatured proteins indicating even larger values. Presumably, local side-chain backbone interactions severely restrict chain flexibility, with the cumulative effect of many such restrictions giving rise to biases in chain direction that may persist for the entire length of a protein chain. Comparison of experimental dipolar couplings for peptides with couplings calculated for ensembles of conformations generated by molecular dynamics should permit evaluation of the accuracy of molecular mechanics potentials in reproducing sequence-specific preferences for phi and psi angles.     

Exact solutions for chemical bond orientations from residual dipolar couplings

New methods for determining chemical structures from residual dipolar couplings are presented. The fundamental dipolar coupling equation is converted to an elliptical equation in the principal alignment frame. This elliptical equation is then combined with other angular or dipolar coupling constraints to form simple polynomial equations that define discrete solutions for the unit vector(s). The methods are illustrated with residual dipolar coupling data on ubiquitin taken in a single anisotropic medium. The protein backbone is divided into its rigid groups (namely, its peptide planes and C frames), which may be solved for independently. A simple procedure for recombining these independent solutions results in backbone dihedral angles and that resemble those of the known native structure. Subsequent refinement of these - angles by the ROSETTA program produces a structure of ubiquitin that agrees with the known native structure to 1.1 Å C rmsd.