Partitioning of caseinomacropeptide in aqueous two-phase systems

This study evaluates the influence of type of salt and temperature on the partition coefficient of caseinomacropetide (CMP) to determine the best conditions for the recovery of CMP in aqueous two-phase systems (ATPS) composed by poly(ethylene glycol) (PEG) 1500 and an inorganic salt (potassium phosphate, sodium citrate, lithium sulfate or sodium sulfate). In all systems, CMP presented affinity for the PEG-rich phase. The PEG1500+lithium sulfate showed the highest values of partitioning coefficient. In addition, thermodynamic parameters (DeltaH degrees , DeltaS degrees , DeltaG degrees) as a function of temperature, were calculated for the system PEG1500-sodium citrate at different PEG concentrations and the results imply thermodynamic differences between partitioning of CMP in this system.     

Partitioning of glycomacropeptide in aqueous two-phase systems

The partition behavior of glycomacropeptide (GMP) was determined in polyethylene glycol (PEG) and sodium citrate aqueous two-phase systems (ATPS). It was found that the partitioning of GMP depends on PEG molar mass, tie line length, pH, NaCl concentration and temperature. The obtained data indicates that GMP is preferentially partitioned into the PEG phase without addition of NaCl at pH 8.0. Larger tie line lengths and higher temperatures favor GMP partition to the PEG phase. Furthermore, it was verified that PEG molar mass and concentration have a slight effect on GMP partition. The increase in the molar mass of PEG induces a reduction of the protein solubility in the top PEG rich phase, being shown that the use of PEG1500 is beneficial for the extraction of GMP. A protein recovery higher than 85% was obtained in the top phase of these systems, clearly demonstrating its suitability as a starting point for the separation of GMP.     

Partitioning of beta-galactosidase fusion proteins in PEG/potassium phosphate aqueous two-phase systems.

Four different beta-galactosidase fusion proteins have been partitioned in poly(ethylene glycol) (PEG) 4000/potassium phosphate aqueous two-phase systems. The partition coefficients (K) of staphylococcal protein A-beta-galactosidase (SpA beta gal) (K = 3.5) and staphylococcal protein A-streptococcal protein G-beta-galactosidase (AG beta gal) (K = 2.8) were compared with the partition coefficients of their constituent molecules, beta-galactosidase, SpA, and protein AG. It was found that by fusing beta-galactosidase to the smaller proteins SpA and protein AG, their partition coefficients were increased four to five times. Experimental data were fitted into, and found to agree with, the Albertsson partition model of interacting molecules. The compatibility with PEG and potassium phosphate of beta-galactosidase, SpA, and two different versions of the SpA beta gal protein, displayed as precipitation curves, showed a relationship to the protein partition coefficients in PEG/potassium phosphate systems. High solubility in one phase component was accompanied by preferential partitioning to the phase rich in the same component in the PEG/potassium phosphate system. Also, a changed linker region in SpA beta gal resulted in a more soluble protein. This, together with the improved K values of the target proteins by fusion, shows that it is possible to use beta-galactosidase as an affinity handle.     

Partitioning of peptide-tagged proteins in aqueous two-phase systems using hydrophobically modified micelle-forming thermoseparating polymer

Genetic engineering has been used to construct hydrophobically modified fusion proteins of cutinase from Fusarium solani pisi and tryptophan-containing peptides. The aim was to enhance the partitioning of the tagged protein in a novel aqueous two-phase system formed by only one water-soluble polymer. The system was based on a hydrophobically modified random copolymer of ethylene oxide (EO) and propylene oxide (PO) units, HM-EOPO, with myristyl groups (C(14)H(29)) at both ends. The HM-EOPO polymer is strongly self-associating and has a lower critical solution temperature (cloud point) at 12 degrees C in water. At temperatures above the cloud point a two-phase system is formed with a water top phase and a polymer-enriched bottom phase. By adding a few percent of hydroxypropyl starch polymer, Reppal PES 200, to the system, it is possible to change the densities of the phases so the HM-EOPO-enriched phase becomes the top phase and Reppal-enriched phase is the bottom phase. Tryptophan-based peptides strongly preferred the HM-EOPO rich phase. The partitioning was increased with increasing length of the peptides. Full effect of the tag as calculated from peptide partitioning data was not found in the protein partitioning. When a short spacer was introduced between the protein and the tag the partitioning was increased, indicating a better exposure to the hydrophobic core of the polymer micelle. By adding a hydrophilic spacer between the protein and trp-tag, it was possible to increase the partitioning of cutinase 10 times compared to wild-type cutinase partitioning. By lowering the pH of the system and addition of NaCl, the partitioning of tagged protein was further increased towards the HM-EOPO phase. After isolating the HM-EOPO phase, the temperature was increased and the protein was back-extracted from the HM-EOPO phase to a fresh water phase.     

Partitioning of whey proteins, bovine serum albumin and porcine insulin in aqueous two-phase systems

Partitioning of the proteins from cheese whey, bovine serum albumin and porcine insulin were analysed using aqueous two-phase systems (ATPS) prepared with PEG–phosphate, PEG–citrate and PEG–maltodextrin (MD). Proteins were quantified through one of the following methods: FPLC, Bradford and spectrophotometry at 280 nm. Results showed that whey proteins partitioned unevenly on the phases of the systems used, with α-lactoalbumin (α-La) concentrated in the upper phase and β-lactoglobulin (β-Lg) in the lower. Albumin in PEG–MD systems concentrated in the MD-rich lower phase. Porcine insulin showed great affinity with the PEG-rich phase, its partition coefficient was always over 10 and increases with PEG molecular mass.     

Improved partitioning in aqueous two-phase system of tyrosine-tagged recombinant lactate dehydrogenase

The partitioning of Bacillus stearothermophilus lactate dehydrogenase (LDH) in an aqueous two-phase system was studied. Particularly, the influence of tyrosine tags on the partitioning was evaluated. The hydrophobic effect, caused by the addition of tyrosine residues, was determined in a system based on dextran and the thermoseparating ethylene oxide-propylene oxide random copolymer (EO30PO70). Five different LDH variants were constructed with N-terminal tags containing tyrosines (Y3 and Y6), tyrosines and prolines (Y3P2 and Y6P2), and only prolines (P2). LDH fused with tags containing tyrosines increased the partitioning coefficient, and the more tyrosines added to the protein, the larger improvement in partitioning. When prolines were added between the tyrosine-rich tag and the protein, a further increased partitioning was obtained. The enhanced partitioning was attributed to the rigid structure of the proline, which in turn led to an increase in the exposure of the tag to the surroundings. The best tyrosine tag, Y6P2, increased the partition coefficient four times and additionally, a higher thermostability was observed.     

Partitioning of host and recombinant cells in aqueous two-phase polymer systems

The separation of host and recombinant Escherichia coli bacterial cells has been studied using the surface-sensitive technique of partitioning in aqueous two-phase polymer systems. Experiments were designed to probe charge-and hydrophobicity-related property differences of antibiotic-resistant recombinant cells and their antibiotic-sensitive hosts. Differential partitioning was observed in both charge-sensitive and non-charge-sensitive phase systems for three host-recombinant cell systems, but the non-charge-related effects appear to have a greater impact on partitioning behavior. This result suggests that plasmid-encoded products related to antibiotic resistance modify the surface hydrophobicity of the E. coli bacterial cell and that these differences can be exploited for cell separation.     

Partitioning of acid proteases in aqueous two-phase systems containing a charged polymer

Summary A preparation of DEAE-dextran was described, which can form an aqueous two-phase system with hydroxypropyldextran. Acid proteases showed strong partition in this system due to its large interfacial electrical potential. Partition coefficients of the enzymes changed rapidly when salts were added.     

Partitioning features of bovine trypsin and alpha-chymotrypsin in polyethyleneglycol-sodium citrate aqueous two-phase systems

The partitioning of bovine trypsin and alpha-chymotrypsin--proteases of similar physico-chemical properties--in different polyethyleneglycol/sodium citrate aqueous two-phase systems was investigated. The effect of different factors such as polyethyleneglycol molecular weight, pH, tie line length, temperature and the presence of an inorganic salt on the protein partition coefficient were analysed. Both a decrease in PEG molecular weight and an increase in pH led to a higher partition coefficient for both enzymes. Aqueous two-phase systems formed by PEG of molecular weight 3350 and citrate pH 5.2 showed the best separation capability which was enhanced in presence of sodium chloride 3%. The transfer of both proteins to the top phase was associated with negative enthalpic and entropic changes.     

Partitioning behavior of amino acids in aqueous two-phase systems with recyclable volatile salts

As part of an ongoing research effort on aqueous two-phase systems (ATPSs) with volatile salts, this work describes the partitioning behavior of a series of amino acids, namely -serine, glycine, -alanine, -valine, -methionine, -isoleucine, and -phenylalanine, in these systems. The results show that amino acids partition in a similar way in polymer–volatile salt ATPSs and in traditional polymer–salt ATPSs. Increasing amino acid hydrophobicities lead to increasing partition coefficients. Moreover, the common linear relationship between the logarithm of the partition coefficient and the tie line length is observed here as well. Furthermore, the relation between relative partition coefficients and relative hydrophobicities of amino acids in the extraction systems investigated in this work is comparable to that in other extraction systems.     

Partitioning of yeast RNA in aqueous two-phase system

Summary The partition behaviour of RNA extracted from yeast was examined using three types of aqueous two-phase systems: potassium phosphate—polyethyleneglycol (PEG) system, ammonium sulphate—PEG system and dextran sulphate—PEG—NaCl system. The molecular weight of PEG showed rather remarkable effects of RNA partition than did the electrolyte. High molecular weight RNA was concentrated at the interface in these systems. This suggests the possibility of its simple concentration or extraction.     

Separation of proteins and viruses using two-phase aqueous micellar systems

We discuss the utilization of a novel two-phase aqueous nonionic micellar system for the purification and concentration of biomolecules, such as proteins and viruses, by liquid–liquid extraction. The nonionic surfactant n-decyl tetra(ethylene oxide), C₁₀E₄, phase separates in water into two coexisting aqueous micellar phases by increasing temperature. The mild interactions of the C₁₀E₄ nonionic surfactant with biomolecules, combined with the high water content of the two coexisting micellar phases, suggest the potential utility of two-phase aqueous C₁₀E₄ micellar systems for the purification and concentration of biomolecules. In this paper, we review our recent experimental and theoretical studies involving the partitioning of several water-soluble proteins, including cytochrome c, soybean trypsin inhibitor, ovalbumin, bovine serum albumin, and catalase, in the two-phase aqueous C₁₀E₄ micellar system. In addition, we present results of our preliminary experimental investigation on the partitioning of bacteriophages, including φX174, P22, and T4.     

Functional characterization of green fluorescent protein-profilin fusion proteins.

To clarify the role of profilins in cells, fusion proteins constructed with green fluorescent protein (GFP) should be extremely helpful. As profilins are considerably smaller than the GFP fusion partner (14-17 kDa compared with 27 kDa, respectively), we characterized the fusion proteins in vitro, to ascertain their biological function. We fused mouse profilin I and II to either the C-terminus or N-terminus of GFP. These fusion proteins were expressed in Escherichia coli and affinity-purified on polyproline-Sepharose. Interaction with vasodilator-stimulated phosphoprotein, a proline-rich ligand of profilin, was investigated by ELISA, as was binding to PtdIns(4,5)P2. The affinity for actin was quantitatively determined in polymerization assays. Our results show that fusion of GFP to the C-terminus of profilin I abolishes polyproline binding. In contrast, the other fusion proteins bound to polyproline-Sepharose and VASP. Binding to PtdIns(4,5)P2 was not significantly altered. Furthermore, fusion of either isoform with GFP did not decrease the affinity for actin. In localization studies with mammalian cells, all fusion proteins showed the localization expected for profilin in areas of high actin dynamics, such as leading lamellae and ruffles induced by epidermal growth factor. However, with regard to our in vitro data, we suspect that only a minor fraction of profilin I carrying the GFP at the C-terminus can target these sites. Therefore, other constructs should be preferred for further in vivo studies.     

Purification of fusion proteins using affinity microspheres in aqueous two-phase systems

Affinity microspheres were prepared by immobilizing human -globulin (HGb) onto carboxylated poly (styrene/acrylamide) latex particles [P(St/AAm)-H; average diameter 0.33 m], which were prepared by emulsifier-free emulsion polymerization. HGB was covalently immobilized onto the latex particles with high efficiency by the carbodiimide method. A fusion protein (ZZB1B2) of immunoglobulin G and albumin-binding domains (ZZ and B1B2, respectively) was expressed intracellularly and extracellularly in Escherichia coli and was purified by the affinity microspheres. In poly (ethylene glycol) (PEG)/potassium phosphate aqueous two-phase system, the affinity microspheres were partitioned into the PEG-rich top phase, while cells and cell debris of E. coli were displaced into the salt-rich bottom phase. Therefore, ZZB1B2 was directly purified from cell disintegrate or culture broth by combining the affinity microspheres with the aqueous two-phase partitioning, and its purity was almost the same as that purified by conventional affinity chromatography. Therefore, by this purification method, the primary purification process and the subsequent high resolution purification process are combined, and the number of purification steps can be reduced. Correspondence to: A. Kondo     

Partitioning of amylase produced by Aspergillus niger in solid state fermentation using aqueous two-phase systems

Equilibrium data of aqueous two-phase systems composed of polyethylene glycol (4000 g mol⁻¹ or 6000 g mol⁻¹) and Li₂SO_4, (NH₄)₂SO₄ or Na₂SO₄ at pH 6.5 and 25 °C were obtained. The efficiency of these in the partition of amylases derived from Aspergillus niger was determined. The experimental data of binodal curves and tie lines were used to estimate the group interaction parameters using the UNIFAC model. Additionally, the influence of phases on the activity of the enzymes was investigated. The results indicate that the polymer molar mass did not influence the biphasic region size. However, the cations under study presented differences in induction to phase formation. It was verified that the systems formed with the Na⁺ presented a larger biphasic region. The increase in the molar mass of the polymer caused the increase in the exclusion volume from 3970.732 g mol⁻¹ to 5700.873 g mol⁻¹. The transfer Gibbs free energy of enzymes presented values between −1296.30 kJ mol⁻¹ and −2867.70 kJ mol⁻¹, that is, the process was spontaneous for all systems studied. The systems formed by (NH₄)₂SO₄ and PEG 4000 g mol⁻¹ presented the best K_e result (3.421) and theoretical recovery of 80.35 %.     

Enhanced discrimination in the partition of proteins by aqueous polymer two-phase systems

Aqueous polymer two-phase systems containing dextran T-500 and PEG 4000 can be prepared which are biphasic below 18 degrees C and monophasic at higher temperatures. Both liganded and unliganded forms of glutamate dehydrogenase and troponin, which have similar partition coefficients if the protein is added to a two-phase system at 4 degrees C, have widely differing partition coefficients if added to the same system in the monophasic state at 20 degrees C and subsequently cooled to 4 degrees C.     

Extractive bioconversions in aqueous two-phase systems: enzymatic hydrolysis of casein proteins

Partition coefficients in poly(ethylene glycol)/dextran aqueous two-phase systems are reported for mixed-casein and its components, alpha, beta and kappa casein. Rates of casein proteolysis by alpha-chymotrypsin and by trypsin are reported in single-phase and aqueous two-phase reactor systems. The advantages resulting from selective partitioning of substrates, enzymes, and products are examined in terms of relative volumetric reaction rates.     

Recovery in aqueous two-phase systems of lutein produced by the green microalga Chlorella protothecoides

The objective of this study was to develop a chromatographic method for the analysis of the anti-androgen vinclozolin (V) and its metabolites 2-[[(3,5-dichlorophenyl)-carbamoyl]oxy]-2-methyl-3-butenoic acid (M1), 3',5'-dichloro-2-hydroxy-2-methylbut-3-enanilide (M2) and 3,5-dichloroaniline (M3) in rat serum. V, M1-M3 were resolved using an HPLC gradient program with a mobile phase consisting of 60-75% methanol:acetonitrile (70:30) and 0.05 M monobasic sodium phosphate buffer pH 3.3 at 1 ml/min, a C18 column, and monitored at 212 nm. Incubates of 0.01 M monobasic potassium phosphate buffer (PB) pH 7.4 and rat serum were spiked with V and its metabolites and processed by diluting samples (1:4) with 0.1M PB pH 3.3, to limit methodological hydrolysis of analytes, followed by addition of acetonitrile. Recoveries of V, M1 and M2 ranged from 85 to 105%, whereas recovery of M3 was <25%. V was hydrolyzed to M1 and M2 after incubation in PB pH 7.4 and rat serum, with M1 the predominant metabolite. This method was successfully applied in the analysis of V and its metabolites in the serum of a male rat after oral administration of V (100 mg/kg).