Effects of Biomimetic Surface Designs on Furrow Opener Performance

The effects of biomimetic designs of tine furrow opener surface on equivalent pressure and pressure in the direction ofmotion on opener surface against soil were studied by finite element method (FEM) simulation and the effects of these designson tool force and power requirements were examined experimentally.Geometrical structures of the cuticle surfaces of dungbeetle (Copris ochus Motschulsky) were examined by stereoscopy.The structures of the cuticle surfaces and Ultra High Mo-lecular Weight Polyethylene (UHMWPE) material were modeled on surface of tine furrow opener as biomimetic designs.Sevenfurrow openers were analyzed in ANSYS program (a FEM simulation software).The biomimetic furrow opener surfaces withUHMWPE structures were found to have lower equivalent pressure and pressure in the direction of motion as compared to theconventional surface and to the biomimetic surfaces with textured steel-35 structures.It was found that the tool force and powerwere increased with the cutting depth and operating speed and the biomimetic furrow opener with UHMWPE tubular sectionridges showed the lowest resistance and power requirement against soil..     

Restudies on Body Surface of Dung Beetle and Application of Its Bionics Flexible Technique

1　IntroductionTheadherencebetweenthesoilandthetouchingmachinecomponentscriticallyreducestheworkingeffi ciencyandqualityofthediggingmachinesandfarmtools.Therefore ,thenon adherenceisabigproblemintheindustry ,agriculturalproduction ,andmechanicalengineering[1- 4] .Thesurveyshaveshownthatthecar riagevolumeofdumptrucksworkinginstickyclaycanbereducedby 2 0 %to 5 0 %duetoadheredsoil[3] .Thus,itisanurgentdemandtodevelopaneffectivetechniqueforthereductionofadhesionanddraft.Thebodysurfacesoftheanimal…     

蜣螂(Copris ochus Motschulsky)减粘脱附的仿生学研究

研究蜣螂减粘脱附的机制,为工程机械减粘脱附的研究和应用开辟新的途径。用扫描电镜观测了车蜣螂体表的细微结构,发现蜣螂体表由隆起、凹陷、裂缝、孔洞等构成了非光滑表面,大量的长短不一的刚毛构成了柔性界面,蜣螂活动时体表主要呈负性电位变化,其峰值可达－50mV;仿蜣螂休体表的非光滑表面制作了犁壁和推土板,减低阻力减粘脱附效果明显;仿蜣螂运动时体表电位的变化,设计新的电渗模面,取得显著的减粘脱附效果。     

Adverse effects of ivermectin on the dung beetles, Caccobius jessoensis Harold, and rare species, Copris ochus Motschulsky and Copris acutidens Motschulsky (Coleoptera: Scarabaeidae), in Japan

Effects of the antiparasitic drug, ivermectin, on the dung beetles, Caccobius jessoensis Harold, 1867 and the rare species, Copris ochus Motschulsky, 1860 and Copris acutidens Motschulsky, 1860 were studied in laboratory and field experiments in Hokkaido, Japan. Ivermectin was detected in dung from 1 to 21 or 28 days following treatment, with a peak on the first day after treatment in two pour-on administrations (500 microg kg(-1)), although there were considerable differences between the two peaks. In C. jessoensis, brood balls constructed by the female were not reduced in the dung of treated cattle except for seven days after treatment in experiment 2. Also, there was no significant difference in the mean weight of brood balls between dung from treated and control cattle. However, the emergence rates were significantly reduced in dung 1-3 days after treatment. In the field study, brood balls constructed by C. jessoensis were more abundant in dung from treated cattle in experiment 1, but adult emergence was significantly reduced at one and seven days after treatments. Adult mortality of C. ochus Motschulsky at 90 days after the beginning of rearing was 11.1% in dung from control cattle with 22 brood balls constructed, whereas it was 84% in dung from treated cattle with no brood balls and/or ovipositioning. Also, in C. acutidens Motschulsky, adult mortality at 90 days after the beginning of rearing was 3.6% in dung from control cattle with 13 brood balls constructed, whereas it was 94.1% in dung from treated cattle with no brood balls or ovipositioning. The environmental risk in the use of ivermectin during breeding period of dung beetles in pasture is discussed.     

蜣螂与壁虎刚毛的比较及改形对其功能的影响

脱附与粘附是工程作业的两个相互矛盾的难题,土壤和物料的粘附严重降低了机械的作业效率和质量,没有粘附又使某些机械无法工作或运行。目前世界流行的脱附技术,包括向界面注入空气的充气法、向界面注入溶液的充液法、利用机械或超声波的振动法、施加电场的电渗法、施加磁场的磁     

Fracture Toughness Properties of Three Different Biomaterials Measured by Nanoindentation

The fracture toughness of hard biomaterials, such as nacre, bovine hoof wall and beetle cuticle, is associated with fibrous or lamellar structures that deflect or stop growing cracks. Their hardness and reduced modulus were measured by using a nanoindenter in this paper. Micro/nanoscale cracks were generated by nanoindentation using a Berkovich tip. Nanoindentation of nacre and bovine hoof wall resulted in pile-up around the indent. It was found that the fracture toughness （Kc） of bovine hoof wall is the maximum, the second is nacre, and the elytra cuticle of dung beetle is the least one.     

Nanomechanical Behaviours of Cuticle of Three Kinds of Beetle

The surface materials and structures of insect cuticle can provide useful information for designing anti-adhesion components material. Quantitative measurement of mechanical properties of insect cuticle will help to develop biomimetic materials suitable for industrial products. In this work, the mechanical properties, such as the reduced modulus and hardness in nano-scale, of the cuticle of beetle Geotrupes stercorarius Linnaeus, Copris ochus Motschulsky and Holotrichia sichotana Brenske, were investigated by using a nanoindenter. It was found that the reduce modulus and hardness of these three beetles are different. The main cause of the difference of the mechanical properties is probably due to their different living circumstance, lifestyle and different functions of segments.     

Sexual and male horn dimorphism in Copris ochus (Coleoptera: Scarabaeidae)

Copris ochus (Coleoptera: Scarabaeidae), an endangered species, is the largest dung beetle in Japan. In C. ochus, males have a long head horn, while females lack this long horn (sexual dimorphism). Very large males of C. ochus have disproportionately longer head horns than small males, suggesting male horn dimorphism, although the dimorphism has not been investigated quantitatively. To clarify sexual and male horn dimorphism in C. ochus quantitatively, we examined the scaling relationship between body size (prothorax width) and head horn length in 94 females and 76 males. These beetles were captured during July 1978 from a natural population on Mt. Aso in southwestern Japan using a light trap. Although the horn length of the females and males scaled with prothorax width, the scaling relationship differed between the sexes, i.e., the relationship was linear in females and nonlinear in males. Statistical tests for dimorphism in male horn length showed a significant discontinuous relationship, thus indicating distinct sexual and male dimorphism in head horns. Long- and short-horned C. ochus males may have different reproductive behaviors, as described in other horned dung beetles.     

臭蜣螂体壁的组织结构

对臭蜣螂Copris ochus Motschulsky体壁的组织学结构进行了光镜观察。用伊红和马洛赖氏三色法染色可见体壁尤其在腹壁的折叠处及膜翅壁中存在着胶原纤维。鞘翅中有内腔,具皮细胞,鞘翅背部表皮下陷形成桥墩状结构以支撑加固鞘翅腔并减轻重量。膜翅的背腹壁之间也具有内腔和皮细胞,并充满油脂腺（经分析是棕脂肪细胞腺）及其分泌物。足的肌肉束中被大量棕脂肪细胞腺环绕。棕脂肪细胞的存在为周围器官提供所需能量,并有减轻重量和润滑的作用。体壁表面具有大量突起、刚毛及大量粗细不等的管道与其下相通,加上大量油脂腺及其分泌机能,为其体表的减粘特性提供了形态和化学基础。鞘翅内腔的结构可为建筑仿生学提供一定参考。     

臭蜣螂体壁表面结构及其与减粘脱附功能的关系

采用扫描电镜技术观察并描述了臭蜣螂Copris ochus头部、胸腹部和足部体表上的凹陷和刚毛的结构。发现有4种简单的凹陷,其三维结构、边缘类型和位于凹陷中央的带孔刚毛的长度在身体不同部位均有不同。体壁上还有中央具隆起的凹陷,其中心具带孔刚毛;或缺中心刚毛但在其半环状外边沿上具一小刚毛的凹陷。简单凹陷广泛分布于除腹部以外的各部分,但具中央隆起的凹陷仅出现在前胸背板,具半环状外边沿的凹陷出现在腿节上。在鞘翅纵沟纹的念珠状结中有管状开口。体壁上还有大小和形状不同的刚毛,它们不同于生于凹陷的刚毛。凹陷和刚毛的分布及形态构成体表的非光滑表面,作者探讨了这些结构与体表减粘脱附功能的关系。     

The effect of holding time on nanoindentation measurements of creep in bone

Viscoelasticity may affect both the elastic and fracture characteristics of bone. Nanoindentation can be used to measure the creep behavior of bone by fitting the depth vs. time data at constant load to rheological models. However, the creep data may be influenced by latent effects arising during the loading phase of indentation. As such, the loading protocol, particularly the holding time, may affect the measured creep time constants. To characterize the effect of holding time on the measures, four cortical bone samples were prepared from four bovine femora and subjected to nanoindentation to measure the creep behavior. The creep time constants were found by fitting the indentation depth vs. time curve to three different rheological models: the standard linear solid, Burgers model, and a two-dashpot Kelvin model. All three models provided good fits to the data, which were relatively insensitive to the initial parameter estimates. The calculated creep time constants increased monotonically with increasing holding time for all three models. However, the relative differences between measurements within a single osteon, within a single sample, and between samples were maintained for creep holding times over 16s. Hence, while the creep time constants measured by nanoindentation with hold times up to 30s may not provide accurate property measurements, comparisons between samples are valid if all are assessed at the same holding time. Considering the long-term viscosity of bone tissue, Burgers model provided the best performance in terms of stability and goodness of fit, and is recommended for future studies.     

Dung Beetle Assemblages and Seasonality in Primary Forest and Forest Fragments on Agricultural Landscapes in Budongo, Uganda

Very little is known about the diversity of arthropods in the fast-disappearing fragments of natural forests in sub-Saharan Africa. This study investigated: (1) the influence of forest fragment characteristics on dung beetle species richness, composition, abundance, and diversity; and (2) the relationship between dung beetle assemblages and rainfall pattern. Beetles were sampled through 12 mo using dung baited pitfall traps. A total of 18,073 dung beetles belonging to three subfamilies and 45 species were captured. The subfamily Scarabaeinae was the most abundant (99%) and species rich (89%). Fast-burying tunnellers (paracoprids) were the most dominant functional group. Catharsius sesostris, Copris nepos , and Heliocopris punctiventris were the three most abundant species, and had the highest contributions to dissimilarities between forests. With few exceptions, dung beetle abundance, species richness, and diversity were generally higher in larger forest fragments (100–150 ha) than in smaller ones (10–50 ha) and the nature reserve (1042 ha). Forest fragment size had a highly significant positive relationship with beetle abundance, but only when the nature reserve is excluded in the analysis. Dung beetle abundance and species richness showed direct weak relationships with litter depth (positive) and groundcover (negative) but not tree density, tree species richness, and fragment isolation distance. Dung beetle abundance and species richness were strongly correlated with monthly changes in rainfall. Results of this study indicate that forest fragments on agricultural lands in the Budongo landscape, especially medium-sized (100–150 ha) ones, represent important conservation areas for dung beetles.     

Quasi-Static and Dynamic Nanoindentation of Some Selected Biomaterials

This study details an investigation of the viscoelastic behavior of some biomaterials （nacre, cattle horn and beetle cuticle） at lamellar length scales using quasi-static and dynamic nanoindentation techniques in the materials＇ Transverse Direction （TD） and Longitudinal Direction （LD）. Our results show that nacre exhibits high fracture toughness moving towards a larger cam- paniForm as the stress frequency varies from 10 Hz to 200 Hz. Elytra cuticle exhibits the least fracture toughness presenting little energy dissipation in TD. It was initially speculated that the fracture toughness of the subject materials would be directly related to energy-dissipating mechanisms （mechanical hysteresis）, but not the maximum value of the loss tangent tan＆ However, it was found that the materials＇ elastic modulus and hardness are similar in both the TD and LD when assessed using the quasi-static nanoindentation method, but not dynamic nanoindentation. It is believed that the reported results can be useful in the design of new crack arrest and damping materials based on biological counterparts.     

Precision of nanoindentation protocols for measurement of viscoelasticity in cortical and trabecular bone

Nanoindentation has recently gained attention as a characterization technique for mechanical properties of biological tissues, such as bone, on the sub-micron level. However, optimal methods to characterize viscoelastic properties of bones are yet to be established. This study aimed to compare the time-dependent viscoelastic properties of bone tissue obtained with different nanoindentation methods. Bovine cortical and trabecular bone samples (n=8) from the distal femur and proximal tibia were dehydrated, embedded and polished. The material properties determined using nanoindentation were hardness and reduced modulus, as well as time-dependent parameters based on creep, loading-rate, dissipated energy and semi-dynamic testing under load control. Each loading protocol was repeated 160 times and the reproducibility was assessed based on the coefficient of variation (CV). Additionally, three well-characterized polymers were tested and CV values were calculated for reference.The employed methods were able to characterize time-dependent viscoelastic properties of bone. However, their reproducibility varied highly (CV 9–40%). The creep constant increased with increasing dwell time. The reproducibility was best with a 30 s creep period (CV 18%). The dissipated energy was stable after three repeated load cycles, and the reproducibility improved with each cycle (CV 23%). The viscoelastic properties determined with semi-dynamic test increased with increase in frequency. These measurements were most reproducible at high frequencies (CV 9–10%). Our results indicate that several methods are feasible for the determination of viscoelastic properties of bone material. The high frequency semi-dynamic test showed the highest precision within the tested nanoindentation protocols.     

Factors influencing duiker dung decay in north‐east Gabon: are dung beetles hiding duikers?

We analysed seasonality of dung decay time and the influence of rainfall, leaf fall, beetle attack and moisture on dung decay. Our study was carried out at the Ipassa Reserve, north-east Gabon. We compared the seasonality of dung decay with the seasonality of dung beetle abundance and guild structure. Dung beetle activity was the main factor influencing dung decay in our study site. Decay time was the highest during the main dry season (3.4 days) and the lowest during the short rainy season (0.7 days). Dung decay time was closely related to dung beetle abundance, especially to the abundance of nocturnal beetles. We discuss the implications of such results for duiker survey methods based on dung pellet counts in areas where decay time is extremely short or unknown.     

Coprismycins A and B, neuroprotective phenylpyridines from the dung beetle-associated bacterium, Streptomyces sp

Two new phenylpyridines, named coprismycins A and B (1 and 2), and previously reported dipyridines (3-6) were isolated from a culture of Streptomyces sp. associated with the dung beetle, Copris tripartitus. The structures of the coprismycins (1 and 2) were elucidated by the analysis of 1D and 2D NMR spectra and mass, UV, and IR spectra. Coprismycins A-B (1 and 2) and dipyridines (5 and 6) displayed comparable neuroprotective effects against MPP(+) (1-methyl-4-phenylpyrimidium)-induced neurotoxicity in neuroblastoma SH-SY5Y cells.     

Importance of dung incorporation activity by three species of coprophagous beetle (Coleoptera: Scarabaeidae: Scarabaeinae) macrofauna in pastureland on "La Michilía" biosphere reserve in Durango, Mexico

The dung incorporation activity of three species of coprophagous beetle macrofauna (Coleoptera: Scarabaeidae: Scarabaeinae), Dichotomius colonicus (Say), Phanaeus quadridens (Say), and Copris klugi sierrensis Matthews, was studied on a hectare of pastureland on "La Michilía" Biosphere Reserve. In total, 223 specimens of the three species were recorded. On the basis of abundance, the dominant species was D. colonicus. A substantial percentage (31% in September and 51% in October) of dung pats remained on the surface, untouched by beetles. Most of the specimens observed (92%) were found amassing dung in galleries. The dung accumulation capacity of D. colonicus varied from 5 to 135 g of dung (dry weight)/pair, whereas C. klugi sierrensis amassed an average of 24.3 +/- 8.5 g/pair and P. quadridens amassed an average of 12 +/- 2.5 g/pair. Based on dung burying efficiency, D. colonicus was considered the most beneficial of the three species in the study area. It dug deeper, wider galleries and incorporated the largest amount of dung into the soil.     

Copro-necrophagous beetle (Coleoptera: Scarabaeidae) diversity in an agroecosystem in Yucatan, Mexico

Scarabaeinae are sensitive to structural habitat changes caused by disturbance. We compared copronecrophagous beetle (Scarabaeinae) community structure in three differently managed zones within an agroeco-system of the northern Yucatan Peninsula, Mexico. We placed dung and carrion traps once a month from June 2004 through May 2005. The beetle community included 17 species from the genera Canthon, Canthidium, Deltochilum, Pseudocanthon, Malagoniella, Onthophagus, Phanaeus, Copris, Uroxys, Sisyphus and Ateuchus. The secondary vegetation had a higher beetle diversity than the other two zones. Species richness was highest in the Brosimum alicastrum plantation. The pasture had the lowest species diversity and richness, but exhibited the highest abundance of Scarabaeinae in the dry season. The two zones with extensive tree cover were the most diverse. Roller beetles were dominant over burrower species and small-sized species outnumbered large species. Our data show two important issues: beetle species in the pasture extended their activity to the beginning of the dry season, while abundances dropped in the other, unirrigated zones; and the possibility that the Scarabaeinae living in neotropical forests are opportunistic saprophages and have specialized habits for resources other than dung. The B. alicastrum plantation is beneficial to the entire ranch production system because it functions as a dispersion and development area for stenotopic species limited to tree cover.     

Tamarins and Dung Beetles: An Efficient Diplochorous Dispersal System in the Peruvian Amazonia

Dung beetles fulfill several key functions in ecosystems but their role as secondary seed dispersers is probably one of the most complex ones. Various factors, such as seed characteristics, dispersal pattern induced by the primary disperser, season, and habitat, can affect the seed–beetle interaction. Particularly little is known about the fate of seeds primarily dispersed in small feces. The aim of this study was to investigate the effects of these factors on the dung beetle community (species composition, number and size of individuals) and its consequences on burial occurrence and depth of seeds primarily dispersed by two tamarin species. We captured dung beetles in a Peruvian rain forest with 299 dung‐baited pitfall traps to characterize the dung beetle community. Seed burial occurrence and depth were assessed by marking in situ 551 dispersed seeds in feces placed in cages. Among these seeds, 22.5 percent were buried by dung beetles after 2 d. We observed a significant effect of the amount of dung, season, time of deposition, and habitat on the number of individuals and species of dung beetles, as well as on seed burial occurrence and depth, while the tamarin species significantly influenced only the number and the size of dung beetles. This seed dispersal loop is particularly important for forest regeneration: small to large seeds dispersed by tamarins in secondary forest can be buried by dung beetles. These seeds can thus benefit from a better protection against predation and a more suitable microenvironment for germination, potentially enhancing seedling recruitment.     

Patch size and colonisation patterns: an experimental analysis using north temperate coprophagous dung beetles

The relationship between dung pad size and both adult colonisation and larval development was investigated in an assemblage of north temperate dung beetles ( Geotrupes. Aphodius and Sphaeridium ) using both dung pads and baited pitfall traps. Wet weight of 22-day-old natural dung pads was found to vary widely in the field (< 100 g – >1000 g). Across all sampling dates in field experiments, dung pad size had a significant influence on dung beetle biomass sampled from pads. Closer examination of experimental dung pads on the second day after deposition, when beetle biomass was at a maximum, revealed not only a general positive relationship between pad size and dung beetle biomass but, more importantly, a positive relationship between dung pad size and dung beetle density (dung beetle biomass per unit dung volume). There was a strong trend for Aphodius species richness to increase, and maintain higher values for longer periods of time, in larger pads. Although dung pad and pitfall trap samples could differ in the actual numbers of beetles captured, the relationship between different dung sizes and dung beetle biomass was similar, indicating that the phenomenon is largely related to immigration processes. Pat residence times oi A. rufipes in the laboratory were significantly positively correlated with dung pad size. In two field experiments, positive correlations were found between dung pad size and numbers of larvae in pads of different sizes and in one of these experiments, larval densities (numbers per unit dung volume) were significantly and positively correlated with dung pad size. In one experiment, Aphodius larvae in the early stages of development were found to preferentially occupy the basal area of dung pads. We discuss the implications of our findings in the context of resource utilisation by north temperate dung beetles.