Effect of pH on the structure and stability of Bacillus circulans ssp. alkalophilus phosphoserine aminotransferase: thermodynamic and crystallographic studies

pH is one of the key parameters that affect the stability and function of proteins. We have studied the effect of pH on the pyridoxal-5'-phosphate-dependent enzyme phosphoserine aminotransferase produced by the facultative alkaliphile Bacillus circulans ssp. alkalophilus using thermodynamic and crystallographic analysis. Enzymatic activity assay showed that the enzyme has maximum activity at pH 9.0 and relative activity less than 10% at pH 7.0. Differential scanning calorimetry and circular dichroism experiments revealed variations in the stability and denaturation profiles of the enzyme at different pHs. Most importantly, release of pyridoxal-5'-phosphate and protein thermal denaturation were found to occur simultaneously at pH 6.0 in contrast to pH 8.5 where denaturation preceded cofactor's release by approximately 3 degrees C. To correlate the observed differences in thermal denaturation with structural features, the crystal structure of phosphoserine aminotransferase was determined at 1.2 and 1.5 A resolution at two different pHs (8.5 and 4.6, respectively). Analysis of the two structures revealed changes in the vicinity of the active site and in surface residues. A conformational change in a loop involved in substrate binding at the entrance of the active site has been identified upon pH change. Moreover, the number of intramolecular ion pairs was found reduced in the pH 4.6 structure. Taken together, the presented kinetics, thermal denaturation, and crystallographic data demonstrate a potential role of the active site in unfolding and suggest that subtle but structurally significant conformational rearrangements are involved in the stability and integrity of phosphoserine aminotransferase in response to pH changes.     

Crystal structure of bovine beta-trypsin at 1.5 A resolution in a crystal form with low molecular packing density. Active site geometry, ion pairs and solvent structure

The crystal structure of bovine pancreatic beta-trypsin (BPT) has been determined from a novel orthorhombic crystal form which contains substantially more solvent (filling 57% of the volume of the unit cell) than previously determined orthorhombic (44%) and trigonal (37%) BPT structures. The native and benzamidine-inhibited crystal structures of BPT in ammonium sulphate at pH 5.3 have been determined for the new form by molecular replacement techniques. The structures have been refined at 1.5 A resolution with final R-values of 16.7% and 16.9%, respectively. Comparison with the previously refined old orthorhombic forms shows that the overall conformation of the protein backbone is highly conserved. A great number of previously undefined side-chains have been located in density. At the C terminus an extra ion pair involving lysines 87 and 107 has been revealed. A far more detailed picture of the ordered solvent structure has been derived. Thirty water clusters have been identified. A large water network extends from the calcium binding site to the activation area and the autolysis loop. There is evidence for a water channel reaching from the depth of the specificity pocket to the nearby protein surface which might be involved in the displacement of water molecules upon substrate binding. A sulphate anion which forms hydrogen bonds to the active site residues His57, Ser195 and Gly193 was for the first time positioned in clearly defined electron density. Interaction with the sulphate ion may explain the increase in the pKa value of His57 at high sulphate concentrations which was observed by nuclear magnetic resonance studies of a bacterial serine protease both in crystalline form and in solution. Thus, a His-Ser hydrogen bond will not exist in solvents containing sulphate at low pH (up to at least 6.8) where the imidazole of His57 is protonated. The new crystal form is of considerable interest for substrate binding studies. Wide solvent channels should allow diffusion of large substrates (comparable in size to, e.g. pancreatic trypsin inhibitor) into the enzyme crystal. The active site is accessible; intermolecular contact areas are further remote from the active site than in the old orthorhombic form.     

The crystal structure of the catalytic domain of the site-specific recombination enzyme gamma delta resolvase at 2.7 A resolution

The crystal structure of the catalytic domain of the site-specific recombination enzyme gamma delta resolvase has been determined at 2.7 A resolution. Its first 120 amino acids form a central five-stranded, beta-pleated sheet surrounded by five alpha helices. In one of the four dyad-related dimers, the two active site Ser-10 residues are 19 A apart, perhaps close enough to contact and become covalently linked to the DNA at the recombination site. This dimer also forms the only closely packed tetramer found in the crystal. The subunit interface at a second dyad-related dimer is more extensive and more highly conserved among the homologous recombinases; however, its active site Ser-10 residues are more than 30 A apart. Side chains, identified by mutations that eliminate catalysis but not DNA binding, are located on the subunit surface near the active site serine and at the interface between a third dyad-related pair of subunits of the tetramer.     

Magnetic resonance investigation of ionizable residues at the active site of thermolysin.

The details of the pH dependence of the thermodynamic and magnetic interactions of the active-site region of thermolysin in which manganese has replaced the active-site zinc atom and the inhibitor N-trifluoroacetyl-D-phenylalanine have been examined. These show a number of ionizable groups in the active-site region. A cooperative displacement of manganese at the catalytic site is observed as pH is lowered. This appears to be the result of the protonation of histidine-142 and -146 which act as metal ligands. The metal is 50% displaced at pH 6.0. At higher pH values, the environment of the bound manganese changes as a result of the ionization of at least two groups of approximate pKa = 8.5 and 9.5. These values are assigned to tyrosine-157 and to the water molecule which acts as a metal ligand at the active site. The binding behavior of the inhibitor strongly suggests that two molecules of inhibitor bind to the enzyme. The weaker site is competitive with the synthetic substrate FAGLA (furylacryloylglycyl-leucinamide), while the strong site has no effect on FAGLA hydrolysis. This second site is in the vicinity of the active site with a distance of 8 A or less between the trifluoromethyl group and manganese bound at the active site.     

Crystal structure of the C. perfringens alpha-toxin with the active site closed by a flexible loop region

Clostridium perfringens biotype A strains are the causative agents of gas-gangrene in man and are also implicated as etiological agents in sudden death syndrome in young domestic livestock. The main virulence factor produced by these strains is a zinc-dependent, phosphatidylcholine-preferring phospholipase C (alpha-toxin). The crystal structure of alpha-toxin, at pH 7.5, with the active site open and therefore accessible to substrate has previously been reported, as has calcium-binding to the C-terminal domain of the enzyme at pH 4.7. Here we focus on conformation changes in the N-terminal domain of alpha-toxin in crystals grown at acidic pH. These changes result in both the obscuring of the toxin active site and the loss of one of three zinc ions from it. Additionally, this "closed" form contains a small alpha helix, not present in the open structure, which hydrogen bonds to both the N and C-terminal domains. In conjunction with the previously reported findings that alpha-toxin can exist in active and inactive forms and that Thr74Ile and Phe69Cys substitutions markedly reduced the haemolytic activity of the enzyme, our work suggests that these loop conformations play a critical role in the activity of the toxin.     

Crystal structure of Pseudomonas aeruginosa apo-azurin at 1.85 A resolution.

The 3D structure of apo-azurin from Pseudomonas aeruginosa has been determined at 1.85 A resolution. The crystal structure is composed of two different molecular forms of apo-azurin arranged as hetero-dimers in the tetramer of the asymmetric unit. Form 1 closely resembles the holo-protein lacking copper. Form 2 shows differences in the metal binding site region induced by the incorporation of a solvent molecule into this site. The positions of the copper ligands His46 and His117 are shifted by 0.6 A and 1.6 A. The His117 side chain adopts a position at the surface of the protein, thereby facilitating access to the copper site. The presence of two different molecular forms of apo-azurin in the crystal lattice may reflect an equilibrium between the two forms in solution. 1H-NMR spectra of apo-azurin recorded as a function of pH show that at high pH the line broadening of His35, His46 and His117 resonances is consistent with an interconversion between forms 1 and 2. At low pH, no broadening is observed. This may indicate that here the interconversion is fast on the NMR timescale.     

Crystal structure of a mammalian purple acid phosphatase.

Tartrate-resistant acid phosphatase (TRAP) is a mammalian di-iron- containing enzyme that belongs to the family of purple acid phosphatases (PAP). It is highly expressed in a limited number of tissues, predominantly in bone-resorbing osteoclasts and in macrophages of spleen. We have determined the crystal structure of rat TRAP in complex with a phosphate ion to 2.7 A resolution. The fold resembles that of the catalytic domain of kidney bean purple acid phosphatase (KBPAP), although the sequence similarity is limited to the active site residues. A surface loop near the active site is absent due to proteolysis, leaving the active-site easily accessible from the surrounding solvent. This, we believe, gives a structural explanation for the observed proteolytic activation of TRAP. The current structure was determined at a relatively high pH and without any external reducing agents. It is likely that it represents an oxidized and therefore catalytically inactive form of the enzyme.     

The structure and unusual pH dependence of plastocyanin from the fern Dryopteris crassirhizoma. The protonation of an active site histidine is hindered by pi-pi interactions

Spectroscopic properties, amino acid sequence, electron transfer kinetics, and crystal structures of the oxidized (at 1.7 A resolution) and reduced form (at 1.8 A resolution) of a novel plastocyanin from the fern Dryopteris crassirhizoma are presented. Kinetic studies show that the reduced form of Dryopteris plastocyanin remains redox-active at low pH, under conditions where the oxidation of the reduced form of other plastocyanins is inhibited by the protonation of a solvent-exposed active site residue, His87 (equivalent to His90 in Dryopteris plastocyanin). The x-ray crystal structure analysis of Dryopteris plastocyanin reveals pi-pi stacking between Phe12 and His90, suggesting that the active site is uniquely protected against inactivation. Like higher plant plastocyanins, Dryopteris plastocyanin has an acidic patch, but this patch is located closer to the solvent-exposed active site His residue, and the total number of acidic residues is smaller. In the reactions of Dryopteris plastocyanin with inorganic redox reagents, the acidic patch (the "remote" site) and the hydrophobic patch surrounding His90 (the "adjacent" site) are equally efficient for electron transfer. These results indicate the significance of the lack of protonation at the active site of Dryopteris plastocyanin, the equivalence of the two electron transfer sites in this protein, and a possibility of obtaining a novel insight into the photosynthetic electron transfer system of the first vascular plant fern, including its molecular evolutionary aspects. This is the first report on the characterization of plastocyanin and the first three-dimensional protein structure from fern plant.     

3-D structure of a mutant (Asp101-->Ser) of E.coli alkaline phosphatase with higher catalytic activity.

Mutagenesis of the absolutely conserved residue Asp101 of the non-specific monoesterase alkaline phosphatase (E.C. 3.1.3.1) from E. coli has produced an enzyme with increased kcat. The carboxyl group of the Asp101 residue has been proposed to be involved in the positioning of Arg166 and the formation of the helix that contains the active site Ser102. The crystal structure of the Asp101-->Ser mutant has been refined at 2.5 A to a final crystallographic R-factor of 0.173. The altered active site structure of the mutant is compared with that of the wild-type as well as with the structures of the mutant enzyme soaked in two known alkaline phosphatase inhibitors (inorganic phosphate and arsenate). The changes affect primarily the side chain of Arg166 which, by losing the hydrogen bond interaction with the carboxyl side chain of Asp101, becomes more flexible. This analysis, in conjunction with product inhibition studies of the mutant enzyme, suggests that at high pH (> 7) the enzyme achieves a quicker catalytic turnover by allowing a faster release of the product.     

Phosphoglycolate phosphatase. Effect of cation and pH on activity.

P-glycolate phosphatase requires divalent cations for activity. Activity-pH curves identified 2 active site residues with pK values at pH 5.7 and pH 9.1 in the presence of magnesium and at pH 5.7 and pH 7.5 in the presence of manganese or cobalt. Saturation velocity kinetics enabled the identification of two distinct divalent cation binding sites. The first, nonspecific site has a K0.5 of 2 to 7 x 10(-5) M, depending on the cation and the pH. The second site, which is specific for magnesium, binds this cation in a negatively cooperative fashion. The affinity at pH 8.1 varies approximately 100-fold from the first magnesium bound to the fourth. The negative cooperativity is greatest at high pH. Because the pH range of activity is very broad, both the phosphate monoanion and dianion of P-glycolate must be bound as the substrate. The concentration of these two species at the apparent Km is independent of magnesium concentration. The P-glycolate.magnesium complex is kinetically inactive.     

Structures of the “open” and “closed” state of trypanosomal triosephosphate isomerase,as observed in a new crystal form: Implications for the reaction mechanism

The structure of trypanosomal triosephosphate isomerase (TIM)has been solved at a resolution of 2.1Å in a new crystal form grown at pH 8.8 from PEG6000. In this new crystal form (space group C2, cell dimensions 94.8 Å, 48.3 Å, 131.0 Å, 90.0°, 100.3°, 90.0°), TIM is present in a ligand-free state. The asymmetric unit consists of two TIM subunits. Each of these subunits is part of a dimer which is sitting on a crystallographic twofold axis, such that the crystal packing is formed from two TIM dimers in two distinct environments. The two constituent monomers of a given dimer are, therefore, crystallographically equivalent. In the ligand-free state of TIM in this crystal form, the two types of dimer are very similar in structure, with the flexible loops in the “Open” conformation. For one dimer (termed molecule-1), the flexible loop (loop-6) is involved in crystal contacts. Crystals of this type have been used in soaking experiments with 0.4 M ammonium sulphate (studied at 2.4 Å resolution), and with 40 μM phosphoglycolohydroxamate (studied at 2.5 Å resolution). It is found that transfer to 0.4 M ammonuum sulphate (equal to 80 times the Ki of sulphate for TIM), gives rise to significant sulphate binding at the active site of one dimer (termed molecule-2), and less significant binding at the active site of the other. In neither dimer does sulphate induce a “closed” conformation. In a mother liquor containing 40 μM phosphoglycolohydroxamate (equal to 10 times the Ki of phosphoglycolohydroxamate for TIM), an inhibitor molecule binds at the active site of only that dimer of which the flexible loop is free from crystal contacts (molecule-2). In this dimer, it induces a closed conformation. These three structures are compared and discussed with respect to the mode of binding of ligand in the active site as well as with respect to the conformational changes resulting from ligand binding. © 1993 Wiley-Liss, Inc.     

The pH-dependent structural variation of complementarity-determining region H3 in the crystal structures of the Fv fragment from an anti-dansyl monoclonal antibody.

The Fv fragment from an anti-dansyl antibody was optimally crystallized into two crystal forms having slightly different lattice dimensions at pH 5.25 and 6.75. The two crystal structures were determined and refined at high resolution at 112 K (at 1.45 A for the crystal at pH 5.25 and at 1.55 A for that at pH 6.75). In the two crystal structures, marked differences were identified in the first half of CDRH3 s having an amino acid sequence of Ile95H-Tyr96H-Tyr97H-His98H-Tyr99H-Pro1 00H-Trp100aH-Phe100bH-Ala101H- Tyr102H. NMR pH titration experiments revealed the p Kavalues of four histidine residues (His27dL, His93L, His55H and His98H) exposed to solvent. Only His98H (p Ka=6.3) completely changed its protonation state between the two crystallization conditions. In addition, the environmental structures including hydration water molecules around the four histidine residues were carefully compared. While the hydration structures around His27dL, His93L and His55H were almost invariant between the two crystal structures, those around His98Hs showed great difference in spite of the small conformational difference of His98H between the two crystal structures. These spectroscopic and crystallographic findings suggested that the change in the protonation state in His98H was responsible for the structural differences between pH 5.25 and 6.75. In addition, the most plausible binding site of the dansyl group was mapped into the present structural models with our previous NMR experimental results. The complementarity-determining regions H1, H3 and the N-terminal region in the VH domain formed the site. The side-chain of Tyr96H occupied the site and interacted with Phe27H of H1, giving a clue for the binding mode of the dansyl group in the site.     

Crystal structures of CheY from Thermotoga maritima do not support conventional explanations for the structural basis of enhanced thermostability.

The crystal structure of CheY protein from Thermotoga maritima has been determined in four crystal forms with and without Mg++ bound, at up to 1.9 A resolution. Structural comparisons with CheY from Escherichia coli shows substantial similarity in their folds, with some concerted changes propagating away from the active site that suggest how phosphorylated CheY, a signal transduction protein in bacterial chemotaxis, is recognized by its targets. A highly conserved segment of the protein (the "y-turn loop," residues 55-61), previously suggested to be a rigid recognition determinant, is for the first time seen in two alternative conformations in the different crystal structures. Although CheY from Thermotoga has much higher thermal stability than its mesophilic counterparts, comparison of structural features previously proposed to enhance thermostability such as hydrogen bonds, ion pairs, compactness, and hydrophobic surface burial would not suggest it to be so.     

1.3 A structure of arylsulfatase from Pseudomonas aeruginosa establishes the catalytic mechanism of sulfate ester cleavage in the sulfatase family.

BACKGROUND: Sulfatases constitute a family of enzymes with a highly conserved active site region including a Calpha-formylglycine that is posttranslationally generated by the oxidation of a conserved cysteine or serine residue. The crystal structures of two human arylsulfatases, ASA and ASB, along with ASA mutants and their complexes led to different proposals for the catalytic mechanism in the hydrolysis of sulfate esters. RESULTS: The crystal structure of a bacterial sulfatase from Pseudomonas aeruginosa (PAS) has been determined at 1.3 A. Fold and active site region are strikingly similar to those of the known human sulfatases. The structure allows a precise determination of the active site region, unequivocally showing the presence of a Calpha-formylglycine hydrate as the key catalytic residue. Furthermore, the cation located in the active site is unambiguously characterized as calcium by both its B value and the geometry of its coordination sphere. The active site contains a noncovalently bonded sulfate that occupies the same position as the one in para-nitrocatecholsulfate in previously studied ASA complexes. CONCLUSIONS: The structure of PAS shows that the resting state of the key catalytic residue in sulfatases is a formylglycine hydrate. These structural data establish a mechanism for sulfate ester cleavage involving an aldehyde hydrate as the functional group that initiates the reaction through a nucleophilic attack on the sulfur atom in the substrate. The alcohol is eliminated from a reaction intermediate containing pentacoordinated sulfur. Subsequent elimination of the sulfate regenerates the aldehyde, which is again hydrated. The metal cation involved in stabilizing the charge and anchoring the substrate during catalysis is established as calcium.     

Reaction mechanism of alkaline phosphatase based on crystal structures. Two-metal ion catalysis

Alkaline phosphatase (AP) is a widely distributed non-specific phosphomonoesterase that functions through formation of a covalent phosphoseryl intermediate (E-P). The enzyme also catalyzes phosphoryl transfer reaction to various alcohols. Escherichia coli AP is a homodimer with 449 residues per monomer. It is a metalloenzyme with two Zn2+ and one Mg2+ at each active site. The crystal structure of native E. coli AP complexed with inorganic phosphate (Pi), which is a strong competitive inhibitor as well as a substrate for the reverse reaction, has been refined at 2.0 A resolution. Some parts of the molecular have been retraced, starting from the previous 2.8 A study. The active site has been modified substantially and is described in this paper. The changes in the active site region suggest the need to reinterpret earlier spectral data, and suggestions are made. Also presented are the structures of the Cd-substituted enzyme complexed with inorganic phosphate at 2.5 A resolution, and the phosphate-free native enzyme at 2.8 A resolution. At pH 7.5, where the X-ray data were collected, the Cd-substituted enzyme is predominantly the covalent phosphoenzyme (E-P) while the native Zn/Mg enzyme exists in predominantly noncovalent (E.P) form. Implication of these results for the catalytic mechanism of the enzyme is discussed. APs from other sources are believed to function in a similar manner.     

Structures of open (R) and close (T) states of prephenate dehydratase (PDT)--implication of allosteric regulation by L-phenylalanine

The enzyme prephenate dehydratase (PDT) converts prephenate to phenylpyruvate in L-phenylalanine biosynthesis. PDT is allosterically regulated by L-Phe and other amino acids. We report the first crystal structures of PDT from Staphylococcus aureus in a relaxed (R) state and PDT from Chlorobium tepidum in a tense (T) state. The two enzymes show low sequence identity (27.3%) but the same prototypic architecture and domain organization. Both enzymes are tetramers (dimer of dimers) in crystal and solution while a PDT dimer can be regarded as a basic catalytic unit. The N-terminal PDT domain consists of two similar subdomains with a cleft in between, which hosts the highly conserved active site. In one PDT dimer two clefts are aligned to form an extended active site across the dimer interface. Similarly at the interface two ACT regulatory domains create two highly conserved pockets. Upon binding of the L-Phe inside the pockets, PDT transits from an open to a closed conformation.     

Enzymatic mechanism of creatine amidinohydrolase as deduced from crystal structures.

Crystal structures of the enzyme creatine amidinohydrolase (creatinase, EC 3.5.3.3) with two different inhibitors, the reaction product sarcosine and the substrate creatine, bound have been analyzed by X-ray diffraction methods. With the inhibitor carbamoyl sarcosine, two different crystal forms at different pH values have been determined. An enzymatic mechanism is proposed on the basis of the eight structures analyzed. The enzyme binds substrate and inhibitor in a distorted geometry where the urea resonance is broken. His232 is the general base and acid, and acts as a proton shuttle. It withdraws a proton from water 377 and donates it to the N(3) atom of the guanidinium group. OH- 377 adds to the C(1) atom of the guanidinium group to form a urea hydrate. Proton withdrawal by His232 leads to products. The reaction product sarcosine binds to the active site in a reverse orientation. The free enzyme was found to have a bicarbonate bound to the active site.     

Crystal structure of a bacterial cocaine esterase.

Here we report the first structure of a cocaine-degrading enzyme. The bacterial esterase, cocE, hydrolyzes pharmacologically active (-)-cocaine to a non-psychoactive metabolite with a rate faster than any other reported cocaine esterase (kcat = 7.8 s-1 and KM = 640 nM). Because of the high catalytic proficiency of cocE, it is an attractive candidate for novel protein-based therapies for cocaine overdose. The crystal structure of cocE, solved by multiple anomalous dispersion (MAD) methods, reveals that cocE is a serine esterase composed of three domains: (i) a canonical alpha/beta hydrolase fold (ii) an alpha-helical domain that caps the active site and (iii) a jelly-roll-like beta-domain that interacts extensively with the other two domains. The active site was identified within the interface of all three domains by analysis of the crystal structures of transition state analog adduct and product complexes, which were refined at 1.58 A and 1.63 A resolution, respectively. These structural studies suggest that substrate recognition arises partly from interactions between the benzoyl moiety of cocaine and a highly evolved specificity pocket.     

A rationalization of the acidic pH dependence for stromelysin-1 (Matrix metalloproteinase-3) catalysis and inhibition

The pH dependence of matrix metalloproteinase (MMP) catalysis is described by a broad bell-shaped curve, indicating the involvement of two unspecified ionizable groups in proteolysis. Stromelysin-1 has a third pK(a) near 6, resulting in a uniquely sharp acidic catalytic optimum, which has recently been attributed to His(224). This suggests the presence of a critical, but unidentified, S1' substructure. Integrating biochemical characterizations of inhibitor-enzyme interactions with active site topography from corresponding crystal structures, we isolated contributions to the pH dependence of catalysis and inhibition of active site residues Glu(202) and His(224). The acidic pK(a) 5.6 is attributed to the Glu(202).zinc.H(2)O complex, consistent with a role for the invariant active site Glu as a general base in MMP catalysis. The His(224)-dependent substructure is identified as a tripeptide (Pro(221)-Leu(222)-Tyr(223)) that forms the substrate cleft lower wall. Substrate binding induces a beta-conformation in this sequence, which extends and anchors the larger beta-sheet of the enzyme. substrate complex and appears to be essential for productive substrate binding. Because the PXY tripeptide is strictly conserved among MMPs, this "beta-anchor" may represent a common motif required for macromolecular substrate hydrolysis. The striking acidic profile of stromelysin-1 defined by the combined ionization of Glu(202) and His(224) allows the design of highly selective inhibitors.     

Nucleotide binding to glycogen phosphorylase b in the crystal.

The binding of the allosteric activator, AMP, and the inhibitor, ATP, to glycogen phosphorylase b has been studied in the crystal at 3 Å resolution. The nucleotides bind to two sites on the enzyme which are identified as site N, the allosteric effector site which is close to the subunit-subunit interface, and site I, a nucleoside inhibitor site which blocks the entrance to the active site crevasse. AMP when bound at the allosteric effector site makes several defined interactions with the enzyme in agreement with the results of solution studies. The contacts involve the N-10 position of the base, the 2′ hydroxyl of the ribose and the phosphate. IMP, analysed at 4 Å resolution, appears to bind in an identical conformation to AMP. At 3 Å resolution no well defined conformational changes are observed on binding AMP, although there are indications of a disturbance of the crystal lattice. It is concluded that the forces which stabilise the crystal lattice prevent the allosteric response of the enzyme in the crystal.