Direct electrochemical sensor for fast reagent-free DNA detection

A novel reagentless direct electrochemical DNA sensor has been developed using ultrathin films of the conducting polymer polypyrrole doped with an oligonucleotide probe. Our goal was to develop a prototype electrochemical DNA sensor for detection of a biowarfare pathogen, variola major virus. The sensor has been optimized for higher specificity and sensitivity. It was possible to detect 1.6 fmol of complementary oligonucleotide target in 0.1 ml in seconds by using chronoamperometry. The sensitivity of the developed sensor is comparable to indirect electrochemical DNA sensors, which use electrochemical labels and reagent-intensive amplification. The developed sensing electrode is reusable, highly stable and suitable for storage in solution or in dry state.     

Switch on or switch off: an optical DNA sensor based on poly(p-phenylenevinylene) grafted magnetic beads

There has been an enormous demand for commercial label-free DNA sensors in a diverse range of fields including pre-emptive medicine, diagnostics, environmental monitoring, and food industry. Addressing the need for sensitive, selective and facile DNA sensors, we demonstrate a novel switch on/off sensor design that utilizes sandwich hybridization between photoluminescent anionic conjugated polyelectrolyte (CPE) bound captureprobe coated onto magnetic beads, target and the signaling probe. The hybridization-readout in our sensor was monitored by either fluorescence resonance energy transfer (FRET, switch-on) or superquenching (switch-off) depending on the type of signaling probe used. Moreover recent designs that utilize beads for sensing DNA have been limited towards using electrostatic interactions or intercalation of dyes to observe FRET. To our knowledge this is the first report of a switch on/off sensor utilizing either FRET or superquenching thus providing flexibility for future development of such rapid, facile and sensitive DNA sensors. The FRET-based sensor was investigated by optimizing the reaction parameters and selectivity. A low detection limit of 240 fmol in 2 mL of SSC buffer was achieved.     

Microgravimetric DNA sensor based on quartz crystal microbalance: comparison of oligonucleotide immobilization methods and the application in genetic diagnosis

We report on the study of immobilization DNA probes onto quartz crystal oscillators by self-assembly technique to form variety types of mono- and multi-layered sensing films towards the realization of DNA diagnostic devices. A 18-mer DNA probe complementary to the site of genetic beta-thalassaemia mutations was immobilized on the electrodes of QCM by covalent bonding or electrostatic adsorption on polyelectrolyte films to form mono- or multi-layered sensing films by self-assembled process. Hybridization was induced by exposure of the QCMs immobilized with DNA probe to a test solution containing the target nucleic acid sequences. The kinetics of DNA probe immobilization and hybridization with the fabricated DNA sensors were studied via in-situ frequency changes. The characteristics of QCM sensors containing mono- or multi-layered DNA probe constructed by direct chemical bonding, avidin-biotin interaction or electrostatic adsorption on polyelectrolyte films were compared. Results indicated that the DNA sensing films fabricated by immobilization of biotinylated DNA probe to avidin provide fast sensor response and high hybridization efficiencies. The effects of ionic strength of the buffer solution and the concentration of target nucleic acid used in hybridization were also studied. The fabricated DNA biosensor was used to detect a set of real samples. We conclude that the microgravimetric DNA sensor with its direct detection of amplified products provide a rapid, low cost and convenient diagnostic method for genetic disease.     

Recent progress on performances and mechanisms of carbon dots for gas sensing

Carbon dots (CDs), as an attractive zero-dimensional carbon nanomaterial with unique photoluminescent merits, have recently exhibited significant application potential in gas sensing as a result of their excellent optical/electronic characteristics, high chemical/thermal stability, and tunable surface states. CDs exhibit strong light absorption in the ultraviolet range and tunable photoluminescence characteristics in the visible range, which makes CDs an effective tool for optical sensing applications. Optical gas sensor based on CDs have been investigated, which generally responds to the target gas by corresponding changes in optical absorption or fluorescence. Moreover, electrical gas sensor and quartz crystal microbalance sensor whose sensing layer involves CDs have also been designed. Electrical gas sensor exhibits an increase or a decrease in electrical current, capacitance, or conductance once exposed to the target gas. Quartz crystal microbalance sensor responds to the target gas with a frequency shift. CDs greatly promote the absorption of the target gas and improve the sensitivity of both sensors. In this review, we aim to summarize different types of gas sensors involving CDs, and sensing performances of these sensors for monitoring diverse gases or vapors, as well as the mechanisms of CDs in different types of sensors. Moreover, this review provides the prospect of the potential development of CDs based gas sensors.     

Label‐free DNA sensor based on fluorescent cationic polythiophene for the sensitive detection of hepatitis B virus oligonucleotides

Water‐soluble fluorescent conjugated polymers can be used as an optical platform in highly sensitive DNA sensors. Here we report a simple label‐free DNA sensor using poly(3‐alkoxy‐4‐methylthiophene) to recognize and detect different oligonucleotide targets related to the YMDD gene mutation of hepatitis B virus. The concentration of surfactant Triton X‐100, NaCl, the oligonucleotide capture probe and the oligonucleotide hybridization conditions have a great impact on fluorescence intensity. Under the optimum conditions, two types of oligonucleotide targets involving YMDD gene mutation of hepatitis B virus were successfully recognized. Moreover, there was a linear relationship between fluorescence intensity and the concentration of oligonucleotide target. The detection limit of the wild‐type hepatitis B virus target is 88 pmol L^?1. Copyright © 2009 John Wiley & Sons, Ltd.     

Giant magnetoresistive biochip for DNA detection and HPV genotyping

A giant magnetoresistive (GMR) biochip based on spin valve sensor array and magnetic nanoparticle labels was developed for inexpensive, sensitive and reliable DNA detection. The DNA targets detected in this experiment were PCR products amplified from Human Papillomavirus (HPV) plasmids. The concentrations of the target DNA after PCR were around 10nM in most cases, but concentrations of 10pM were also detectable, which is demonstrated by experiments with synthetic DNA samples. A mild but highly specific surface chemistry was used for probe oligonucleotide immobilization. Double modulation technique was used for signal detection in order to reduce the 1/f noise in the sensor. Twelve assays were performed with an accuracy of approximately 90%. Magnetic signals were consistent with particle coverage data measured with Scanning Electron Microscopy (SEM). More recent research on microfluidics showed the potential of reducing the assay time below one hour. This is the first demonstration of magnetic DNA detection using plasmid-derived samples. This study provides a direct proof that GMR sensors can be used for biomedical applications.     

Compressive Sensing DNA Microarrays

Compressive sensing microarrays (CSMs) are DNA-based sensors that operate using group testing and compressive sensing (CS) principles. In contrast to conventional DNA microarrays, in which each genetic sensor is designed to respond to a single target, in a CSM, each sensor responds to a set of targets. We study the problem of designing CSMs that simultaneously account for both the constraints from CS theory and the biochemistry of probe-target DNA hybridization. An appropriate cross-hybridization model is proposed for CSMs, and several methods are developed for probe design and CS signal recovery based on the new model. Lab experiments suggest that in order to achieve accurate hybridization profiling, consensus probe sequences are required to have sequence homology of at least 80% with all targets to be detected. Furthermore, out-of-equilibrium datasets are usually as accurate as those obtained from equilibrium conditions. Consequently, one can use CSMs in applications in which only short hybridization times are allowed.     

DNA bioassays based on the fluorescence ‘turn off’ of silver nanocluster beacon

Recognition and quantification of oligonucleotide sequences play important roles in medical diagnosis. In this study, a new fluorescent oligonucleotide‐stabilized silver nanocluster beacon (NCB) probe was designed for sensitive detection of oligonucleotide sequence targets. This probe contained two tailored DNA strands. One strand was a signal probe strand containing a cytosine‐rich strand template for fluorescent silver nanocluster (Ag NC) synthesis and a detection sections at each end. The other strand was a fluorescence enhancing strand containing a guanine‐rich section for signal enhancement at one end and a linker section complementary to one end of the signal probe strand. After synthesis of the Ag NCs and hybridization of the two strands, the fluorescence intensity of the as‐prepared silver NCB was enhanced 200‐fold compared with the Ag NCs. Two NCBs were designed to detect two disease‐related oligonucleotide sequences, and results indicated that the two target oligonucleotide sequences in the range 50.0–600.0 and 50.0–200.0 nM could be linearly detected with detection limits of 20 and 25 nM, respectively. The developed fluorescence method using NCBs for oligonucleotide sequence detection was sensitive, facile and had potential for use in bioanalysis and diagnosis.     

Hybridization of DNA targets to glass-tethered oligonucleotide probes

Hybridization of nucleic acids to surface-tethered oligonucleotide probes has numerous potential applications in genome mapping and DNA sequence analysis. In this article, we describe a simple standard protocol for routine preparation of terminal amine-derivatized 9-mer oligonucleotide arrays on ordinary microscope slides and hybridization conditions with DNA target strands of up to several hundred bases in length with good discrimination against mismatches. Additional linker arms separating the glass surface from the probe sequence are not necessary. The technique described here offers a powerful tool for the detection of specific genetic mutations.     

Evaluation of the analytical performances of avidin-modified carbon sensors based on a mediated horseradish peroxidase enzyme label and their application to the amperometric detection of nucleic acids

In this study, neutravidin-coated screen-printed carbon sensors were fully characterized and further used for the amperometric detection of specific DNA sequences of human cytomegalovirus (HCMV DNA). For this purpose, we took advantage of an earlier established relationship between the amount of HRP affinity immobilized on the surface of the electrode and the steady-state current recorded in the presence of H₂O₂ as substrate and the single electron donor [Os^III(bpy)₂pyCl]²⁺ as cosubstrate. After incubating a saturating concentration of biotinylated horseradish peroxidase (Bio-HRP) onto the neutravidin-modified sensors, a surface concentration of active HRP of 3.6 pmol cm⁻² was calculated from the measurement of the electrocatalytic plateau current value. This result indicates that monolayers of neutravidin were adsorbed on the screen-printed carbon sensors. These neutravidin-covered platforms were then used to immobilize biotinylated nucleic acid targets. After hybridization with a complementary digoxigenin-labeled detection probe, the extent of hybrids formed was determined with an anti-digoxigenin HRP conjugate. The biosensor assay was applied to the detection of a synthetic oligonucleotide target, and then to the determination of an amplified viral DNA sequence. Monolayers of HRP-labeled oligonucleotide hybrids were immobilized onto the sensing surface whereas one third of the surface was covered with HCMV DNA hybrids. On the other hand, detection limits of 200 pM and 1 nM were obtained for the short oligonucleotide and the longer DNA targets, respectively. Finally, we demonstrated that the sensitivity of the electrochemical assay could be significantly improved by using high concentrations of the reduced form of the mediator [Os^II(bpy)₂pyCl]⁺, thus allowing one to detect as low as 30 pM of amplified HCMV DNA fragment.     

Operating Cooperatively (OC) Sensor for Highly Specific Recognition of Nucleic Acids

Molecular Beacon (MB) probes have been extensively used for nucleic acid analysis because of their ability to produce fluorescent signal in solution instantly after hybridization. The indirect binding of MB probe to a target analyte offers several advantages, including: improved genotyping accuracy and the possibility to analyse folded nucleic acids. Here we report on a new design for MB-based sensor, called ‘Operating Cooperatively’ (OC), which takes advantage of indirect binding of MB probe to a target analyte. The sensor consists of two unmodified DNA strands, which hybridize to a universal MB probe and a nucleic acid analyte to form a fluorescent complex. OC sensors were designed to analyze two human SNPs and E.coli 16S rRNA. High specificity of the approach was demonstrated by the detection of true analyte in over 100 times excess amount of single base substituted analytes. Taking into account the flexibility in the design and the simplicity in optimization, we conclude that OC sensors may become versatile and efficient tools for instant DNA and RNA analysis in homogeneous solution.     

A gold nanoparticle-based chronocoulometric DNA sensor for amplified detection of DNA

We report a protocol for the amplified detection of target DNA by using a chronocoulometric DNA sensor (CDS). Electrochemistry is known to be rapid, sensitive and cost-effective; it thus offers a promising approach for DNA detection. Our CDS protocol is based on a 'sandwich' detection strategy, involving a capture probe DNA immobilized on a gold electrode and a reporter probe DNA loaded on gold nanoparticles (AuNPs). Each probe flanks one of two fragments of the target sequence. A single DNA hybridization event brings AuNPs, along with hundreds of reporter probes, in the proximity of the electrode. We then employ chronocoulometry to interrogate [Ru(NH3)6]3+ electrostatically bound to the captured DNA strands. This AuNP-amplified DNA sensor can selectively detect as low as femtomolar (zeptomoles) concentrations of DNA targets and conveniently analyze a breast cancer-associated BRCA-1 mutant DNA. The time range for the entire protocol is approximately 3 d, whereas the DNA sensing takes less than 2 h to complete.     

Dramatic increase in the signal and sensitivity of detection <Emphasis Type="Italic">via</Emphasis> self-assembly of branched DNA

In molecular testing using PCR, the target DNA is amplified via PCR and the sequence of interest is investigated via hybridization with short oligonucleotide capture probes that are either in a solution or immobilized on solid supports such as beads or glass slides. In this report, we report the discovery of assembly of DNA complex(es) between a capture probe and multiple strands of the PCR product. The DNA complex most likely has branched structure. The assembly of branched DNA was facilitated by the product of asymmetric PCR. The amount of branched DNA assembled was increased five fold when the asymmetric PCR product was denatured and hybridized with a capture probe all in the same PCR reaction mixture. The major branched DNA species appeared to contain three reverse strands (the strand complementary to the capture probe) and two forward strands. The DNA was sensitive to S1 nuclease suggesting that it had single-stranded gaps. Branched DNA also appeared to be assembled with the capture probes immobilized on the surface of solid support when the product of asymmetric PCR was hybridized. Assembly of the branched DNA was also increased when hybridization was performed in complete PCR reaction mixture suggesting the requirement of DNA synthesis. Integration of asymmetric PCR, heat denaturation and hybridization in the same PCR reaction mixture with the capture probes immobilized on the surface of solid support achieved dramatic increase in the signal and sensitivity of detection of DNA. Such a system should be advantageously applied for development of automated process for detection of DNA.     

Peptide nucleic acid-assisted topological labeling of duplex dna

Peptide nucleic acids (PNAs) are a family of synthetic polyamide mimics of nucleic acids that offer a variety of applications. Pyrimidine bis-PNAs can be used for rational design of novel interlocked DNA nanostructures, earring labels, representing locked pseudorotaxanes or locked catenanes. These structures are created through DNA ligase-mediated catenation of duplex DNA with a circularized oligonucleotide tag at a designated DNA site. The assembly is performed via formation of the PD-loop consisting of a pair of bis-PNA openers and the probe oligonucleotide. The openers locally expose one of the two strands of duplex DNA for hybridizing the probe, whose termini are complementary to the displaced DNA strand. After hybridization, they are in juxtaposition and can subsequently be linked by DNA ligase. As a result, a true topological link forms at a precise position on the DNA double helix yielding locked, earring-like label. DNA topological labeling can be done both in solution and, for longer templates, within the agarose gel plug. Accordingly, highly localized DNA detection with rolling circle amplification of hybridization signal and effective micromanipulations with DNA duplexes become possible through precise spatial positioning of various ligands on the DNA scaffold.     

The kinetics of oligonucleotide replacements

The formation of a duplex between two nucleic acid strands is restricted if one of the strands forms an intra- or intermolecular secondary structure. The formation of the new duplex requires the dissociation and replacement of the initial structure. To understand the mechanism of this type of kinetics we studied the replacement of a labeled DNA oligonucleotide probe bound to a complementary DNA target with an unlabeled probe of the same sequence. The replacement kinetics were measured using a gel-shift assay for 12, 14 and 16-nucleotide probes as a function of temperature and concentration of the unlabeled probe. The results demonstrate that the overall replacement rate is a combination of two kinetic pathways: dissociative and sequential displacement. The dissociative pathway occurs by the spontaneous dissociation of the initial duplex followed by association of the target and unlabeled probe. The sequential displacement pathway requires only the partial melting of the initial duplex to allow for the formation of a branched nucleation complex with the unlabeled probe, followed by the complete displacement of the labeled probe by migration of the branch point. The contribution from the dissociative pathway is predominant at temperatures close to the melting point of the labeled probe, whereas the contribution from the displacement pathway prevails at lower temperatures and when the concentration of the replacing unlabeled probe is high. The results show that at physiological conditions, duplex formation between a single-stranded oligonucleotide probe and a structured region of a target molecule occurs mainly by the sequential-displacement mechanism.     

Genotyping and haplotyping of polymorphisms directly from genomic DNA via coupled amplification and sequencing (CAS).

Coupled amplification and sequencing (CAS) allows a segment of DNA to be sequenced directly from genomic DNA. An initial PCR amplification stage selects and amplifies the target. During a subsequent stage both strands of the target segment are sequenced simultaneously and amplified further. We show that CAS can readily identify variant base pairs. Genotyping of a population for known sequence variation can be achieved simply and directly from genomic DNA of each organism by performing CAS only for the variant bases. The procedure supercedes development and optimization of alternative typing assays based on oligonucleotide hybridization or ligation. In addition, we show that competitive oligonucleotide priming with allelic primers can be readily performed in concert with the second stage of CAS. The combination of techniques allows sequencing of a single chromosome from a heterozygous genomic sample and direct haplotyping of the polymorphism at the priming site with any others encompassed within the amplified segment.     

Earrings and padlocks for the double helix: topological labeling of duplex DNA

Concatenation of hybridization probe with DNA target is crucial for highly localized detection of targeted sequences and might also be used in various gene-therapy applications. Several approaches based on the attachment of a circular oligonucleotide to designated DNA sites have been proposed. Recently, earring-like probes provide a true topological linkage between a probe and the target, thus allowing the DNA labeling by essentially immobile tags. The latest development in this direction takes advantage of oligonucleotide uptake by supercoiled DNA and is an important step forward.     

A portable generic DNA bioassay system based on in situ oligonucleotide synthesis and hybridization detection

In this study, we present a portable and generic DNA bioassay system based on in situ oligonucleotide synthesis followed by hybridization based detection. The system include two main parts, an oligonucleotide synthesizer and a fluorescence detection system. The oligonucleotide synthesizer is based on microfluidic technology and capable of synthesizing any desired oligonucleotide which can be either used as a primer for PCR based detection (external) or a probe for hybridization based detection (integrated) of a target DNA analyte. The oligonucleotide sequence can be remotely sent to the system. The integrated fluorescence detection system is based on a photodiode to detect Texas Red fluorophore as low as 0.5 fmol. The complete system, integrating the oligonucleotide synthesizer and fluorescence detection system, was successfully used to distinguish DNA from two different bacteria strains. The presented generic portable instrument has the potential to detect any desired DNA target sequence in the field. Potential applications are for homeland security and fast responses to emerging bio-threats.     

Single-stranded DNAzyme-based Pb2+ fluorescent sensor that can work well over a wide temperature range

DNAzymes have become an excellent choice for sensing applications. Based on DNAzymes, three generations of Pb(2+) fluorescent sensors have been reported. In these sensors, two oligonucleotide strands (substrate strand and enzyme strand) were used, which not only increased the complexity of the detection system, but also brought some difficulties for the use of the sensors at elevated temperatures. To overcome this problem, a single-stranded DNAzyme-based Pb(2+) fluorescent sensor was designed by combining the substrate sequence and the enzyme sequence into one oligonucleotide strand. The intramolecular duplex structure of this single-stranded DNAzyme kept the fluorophore and the quencher, labeled at its two ends, in close proximity; thus the background fluorescence was significantly suppressed. Using this fluorescent sensor, Pb(2+) quantitation can be achieved with high sensitivity and high selectivity. In addition, the extraordinary stability of the intramolecular duplex structure could assure a low background fluorescence at high temperature, even if the number of complementary base pairs between the substrate sequence and the enzyme sequence was reduced, allowing the sensor to work well over a wide temperature range. Similar performances of the fluorescent sensor at 4, 25 and 37°C suggested that this sensor has a good ability to resist temperature fluctuations.     

DNA microdevice for electrochemical detection of Escherichia coli 0157:H7 molecular markers

An electrochemical DNA sensor based on the hybridization recognition of a single-stranded DNA (ssDNA) probe immobilized onto a gold electrode to its complementary ssDNA is presented. The DNA probe is bound on gold surface electrode by using self-assembled monolayer (SAM) technology. An optimized mixed SAM with a blocking molecule preventing the nonspecific adsorption on the electrode surface has been prepared. In this paper, a DNA biosensor is designed by means of the immobilization of a single stranded DNA probe on an electrochemical transducer surface to recognize specifically Escherichia coli (E. coli) 0157:H7 complementary target DNA sequence via cyclic voltammetry experiments. The 21 mer DNA probe including a C6 alkanethiol group at the 5' phosphate end has been synthesized to form the SAM onto the gold surface through the gold sulfur bond. The goal of this paper has been to design, characterise and optimise an electrochemical DNA sensor. In order to investigate the oligonucleotide probe immobilization and the hybridization detection, experiments with different concentration of DNA and mismatch sequences have been performed. This microdevice has demonstrated the suitability of oligonucleotide Self-assembled monolayers (SAMs) on gold as immobilization method. The DNA probes deposited on gold surface have been functional and able to detect changes in bases sequence in a 21-mer oligonucleotide.