细菌素的合成与作用机制

细菌素是由细菌产生的抗菌蛋白,可以杀死与产生菌相近的细菌。很多乳酸菌产生不同多样性的细菌素,虽然这些细菌素都是由发酵或非发酵食品中发现的乳酸菌产生的,但是迄今只有乳酸链球菌素(Nisin)作为食品防腐剂被广泛应用。和抗生素不同的是,细菌素由核糖体合成,需经翻译后修饰活化并且通过特定转运系统输到胞外才能发挥其功能,它一般通过作用于靶细胞膜来抑制靶细胞的生长,同时本身合成细菌素的细胞对其产物具有免疫性。细菌素能安全有效地抑制病原体生长,在食品行业中具有广阔的应用前景。     

Characteristics and identification of bacteriocins produced by Lactococcus lactis subsp. lactis 194-K

The Lactococcus lactis subsp. lactis 194-K strain has been established to be able to produce two bacteriocins, one of which was identified as the known lantibiotic nisin A, and the other 194-D bacteriocin represents a polypeptide with a 2589-Da molecular mass and comprises 20 amino acid residues. Both bacteriocins were produced in varying proportions in all of the studied culture media, which support the growth of the producer. Depending on the cultivation medium, the nisin A content was 380- to 1123-fold lower in the 194-K stain culture broth than that of the 194-D peptide. In comparision to nisin A Bacteriocin 194-D possessed a wide range of antibacterial activity and suppressed the growth of both Gram-positive and Gram-negative bacteria. An optimal medium for 194-D bacteriocin synthesis was shown to be a fermentation medium which contained yeast extract, casein hydrolysate, and potassium phosphate. The biosynthesis of bacteriocin 194-D by the 194-K strain in these media occurred parallel to producer growth, and its maximal accumulation in the culture broth was observed at14–20 h of the strain’s growth.     

Novel method to extract large amounts of bacteriocins from lactic acid bacteria.

Antimicrobial peptides, bacteriocins, produced by lactic acid bacteria were adsorbed on the cells of producing strains and other gram-positive bacteria. pH was a crucial factor in determining the degree of adsorption of these peptides onto cell surfaces. In general, between 93 and 100% of the bacteriocin molecules were adsorbed at pHs near 6.0, and the lowest (< or = 5%) adsorption took place at pH 1.5 to 2.0. On the basis of this property, a novel isolation method was developed for bacteriocins from four genera of lactic acid bacteria. By using this method we made preparations of pediocin AcH, nisin, sakacin A, and leuconocin Lcm1 that were potent and concentrated. This method produced a higher yield than isolation procedures, which rely on precipitation of the bacteriocins from the cell-free culture liquor. It is simple and can be used to produce large quantities of bacteriocins from lactic acid bacteria to be used as food biopreservatives.     

Novel method to extract large amounts of bacteriocins from lactic acid bacteria.

Antimicrobial peptides, bacteriocins, produced by lactic acid bacteria were adsorbed on the cells of producing strains and other gram-positive bacteria. pH was a crucial factor in determining the degree of adsorption of these peptides onto cell surfaces. In general, between 93 and 100% of the bacteriocin molecules were adsorbed at pHs near 6.0, and the lowest (< or = 5%) adsorption took place at pH 1.5 to 2.0. On the basis of this property, a novel isolation method was developed for bacteriocins from four genera of lactic acid bacteria. By using this method we made preparations of pediocin AcH, nisin, sakacin A, and leuconocin Lcm1 that were potent and concentrated. This method produced a higher yield than isolation procedures, which rely on precipitation of the bacteriocins from the cell-free culture liquor. It is simple and can be used to produce large quantities of bacteriocins from lactic acid bacteria to be used as food biopreservatives.     

Production, recovery and purification of bacteriocins from lactic acid bacteria

Bacteriocins produced by lactic acid bacteria are a heterogeneous group of peptide inhibitors which include lantibiotics (class I, e.g. nisin), small heat-stable peptides (class II, e.g. pediocin AcH/PA1) and large heat-labile proteins (class III, e.g. helveticin J). Many bacteriocins belonging to the first two groups can be successfully used to inhibit undesirable microorganisms in foods, but only nisin is produced industrially and is licensed for use as a food preservative in a partially purified form. This review focuses on the production and purification of class I and class II bacteriocins from lactic acid bacteria. Bacteriocin production is growth associated but the yield of bacteriocin per unit biomass is affected by several factors, including the producing strain, media (carbohydrate and nitrogen sources, cations, etc.) and fermentation conditions (pH, temperature, agitation, aeration and dilution rate in continuous fermentations). Continuous fermentation processes with cell recycle or immobilized cells can result in a dramatic improvement in productivity over batch fermentations. Several simple recovery processes, based on adsorbing bacteriocin on resins or silica compounds, have been developed and can be used to build integrated production processes. Received: 29 December 1998 / Received revision: 23 April 1999 / Accepted: 23 April 1999     

The Effect of Nisin and Monensin on Ruminal Fermentations In Vitro

When mixed ruminal bacteria and alfalfa were incubated in vitro, monensin and nisin both inhibited methane production so long as the concentrations were greater than 1 μM. Monensin- and nisin-dependent methane depressions caused a decrease in the acetate to propionate ratio (4.5 to 3.0). Total volatile fatty acid production was decreased by both monensin and nisin addition at concentrations greater than 2 μM. Starch-digesting ruminal bacteria were initially inhibited by monensin and nisin, but this effect disappeared after two to four transfers. Nisin always inhibited cellulolytic bacteria, but the nisin-dependent inhibition of cellulose digestion was no greater than the inhibition caused by monensin. Monensin and nisin also inhibited amino acid degradation, and nisin was more effective than monensin in controlling the growth of Clostridium aminophilum, an obligate amino acid-fermenting ruminal bacterium that can tolerate low concentrations of monensin. Because nisin was as potent as monensin, bacteriocins such as nisin may have potential as feed additives. Received: 2 December 1996 / Accepted: 10 February 1997     

Ionophore resistance of ruminal bacteria and its potential impact on human health

In recent years, there has been a debate concerning the causes of antibiotic resistance and the steps that should be taken. Beef cattle in feedlots are routinely fed a class of antibiotics known as ionophores, and these compounds increase feed efficiency by as much as 10%. Some groups have argued that ionophore resistance poses the same public health threat as conventional antibiotics, but humans are not given ionophores to combat bacterial infection. Many ruminal bacteria are ionophore-resistant, but until recently the mechanism of this resistance was not well defined. Ionophores are highly lipophilic polyethers that accumulate in cell membranes and catalyze rapid ion movement. When sensitive bacteria counteract futile ion flux with membrane ATPases and transporters, they are eventually de-energized. Aerobic bacteria and mammalian enzymes can degrade ionophores, but these pathways are oxygen-dependent and not functional in anaerobic environments like the rumen or lower GI tract. Gram-positive ruminal bacteria are in many cases more sensitive to ionophores than Gram-negative species, but this model of resistance is not always clear-cut. Some Gram-negative ruminal bacteria are initially ionophore-sensitive, and even Gram-positive bacteria can adapt. Ionophore resistance appears to be mediated by extracellular polysaccharides (glycocalyx) that exclude ionophores from the cell membrane. Because cattle not receiving ionophores have large populations of resistant bacteria, it appears that this trait is due to a physiological selection rather than a mutation per se. Genes responsible for ionophore resistance in ruminal bacteria have not been identified, but there is little evidence that ionophore resistance can be spread from one bacterium to another. Given these observations, use of ionophores in animal feed is not likely to have a significant impact on the transfer of antibiotic resistance from animals to man.     

Bacteriocins of gram-positive bacteria.

In recent years, a group of antibacterial proteins produced by gram-positive bacteria have attracted great interest in their potential use as food preservatives and as antibacterial agents to combat certain infections due to gram-positive pathogenic bacteria. They are ribosomally synthesized peptides of 30 to less than 60 amino acids, with a narrow to wide antibacterial spectrum against gram-positive bacteria; the antibacterial property is heat stable, and a producer strain displays a degree of specific self-protection against its own antibacterial peptide. In many respects, these proteins are quite different from the colicins and other bacteriocins produced by gram-negative bacteria, yet customarily they also are grouped as bacteriocins. Although a large number of these bacteriocins (or bacteriocin-like inhibitory substances) have been reported, only a few have been studied in detail for their mode of action, amino acid sequence, genetic characteristics, and biosynthesis mechanisms. Nevertheless, in general, they appear to be translated as inactive prepeptides containing an N-terminal leader sequence and a C-terminal propeptide component. During posttranslational modifications, the leader peptide is removed. In addition, depending on the particular type, some amino acids in the propeptide components may undergo either dehydration and thioether ring formation to produce lanthionine and beta-methyl lanthionine (as in lantibiotics) or thio ester ring formation to form cystine (as in thiolbiotics). Some of these steps, as well as the translocation of the molecules through the cytoplasmic membrane and producer self-protection against the homologous bacteriocin, are mediated through specific proteins (enzymes). Limited genetic studies have shown that the structural gene for such a bacteriocin and the genes encoding proteins associated with immunity, translocation, and processing are present in a cluster in either a plasmid, the chromosome, or a transposon. Following posttranslational modification and depending on the pH, the molecules may either be released into the environment or remain bound to the cell wall. The antibacterial action against a sensitive cell of a gram-positive strain is produced principally by destabilization of membrane functions. Under certain conditions, gram-negative bacterial cells can also be sensitive to some of these molecules. By application of site-specific mutagenesis, bacteriocin variants which may differ in their antimicrobial spectrum and physicochemical characteristics can be produced. Research activity in this field has grown remarkably but sometimes with an undisciplined regard for conformity in the definition, naming, and categorization of these molecules and their genetic effectors. Some suggestions for improved standardization of nomenclature are offered.     

Bacteriocin detection from whole bacteria by matrix-assisted laser desorption ionization-time of flight mass spectrometry

Class I bacteriocins (lantibiotics) and class II bacteriocins are antimicrobial peptides secreted by gram-positive bacteria. Using two lantibiotics, lacticin 481 and nisin, and the class II bacteriocin coagulin, we showed that bacteriocins can be detected without any purification from whole producer bacteria grown on plates by matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF-MS). When we compared the results of MALDI-TOF-MS performed with samples of whole cells and with samples of crude supernatants of liquid cultures, the former samples led to more efficient bacteriocin detection and required less handling. Nisin and lacticin 481 were both detected from a mixture of their producer strains, but such a mixture can yield additional signals. We used this method to determine the masses of two lacticin 481 variants, which confirmed at the peptide level the effect of mutations in the corresponding structural gene.     

Developing applications for lactococcal bacteriocins

While much of the applied research carried out to date with bacteriocins has concerned nisin, lactococci produce other bacteriocins with economic potential. An example is the two component bacteriocin lacticin 3147, which is active over a wide pH range and has a broad spectrum of activity against Gram-positive bacteria. Since the genetic determinants for lacticin 3147 are encoded on a large self-transmissible plasmid, the bacteriocin genes may be conveniently transferred to different lactococcal starters. The resulting food-grade strains can then be used to make a significant impact on the safety and quality of a variety of fermented foods, through the inhibition of undesirable microflora. The bacteriocin is heat stable so it can also be used as an ingredient in a powdered form such as a spray-dried fermentate. Given the observation that lacticin 3147 is effective at physiological pH, there is also considerable potential for biomedical applications. Field trials have demonstrat ed its efficacy in the prevention of mastitis infections in dairy cows. In contrast to lacticin 3147, the lactococcin bacteriocins A, B and M have a narrow spectrum of activity limited to lactococci. Strains which produce these inhibitors can be exploited in the acceleration of cheese ripening by assisting the premature lysis of starter cultures.     

The Effect of Calcium and Magnesium on the Activity of Bovicin HC5 and Nisin

Some Gram-positive bacteria produce small peptides (bacteriocins) that have antimicrobial activity, but many bacteria can become bacteriocin resistant. Bovicin HC5, a lantibiotic produced by Streptococcus bovis HC5, has the ability to inhibit nisin-resistant bacteria. Because nisin resistance has in many cases been correlated with an alteration of lipoteichoic acids or the polar head groups of membrane phospholipids, we decided to examine the effect of divalent cations on nisin and bovicin HC5 activity. Both bacteriocins catalyzed potassium efflux from S. bovis JB1, a non–bacteriocin-producing strain. The addition of large amounts (100 mM) of calcium or magnesium increased the ability of S. bovis JB1 to bind Congo red (an anionic dye) and counteracted bacteriocin-mediated potassium loss. Calcium was more effective than magnesium in decreasing nisin activity, but the reverse was observed with bovicin HC5. Nisin-resistant S. bovis JB1 cells bound three times as much Congo red as nisin-sensitive cells, and this result is consistent with the idea that changes in cell surface charge can be a mechanism of bacteriocin resistance. The nisin-resistant cells were less susceptible to bovicin HC5, but bovicin HC5 still caused a 50% depletion of intracellular potassium. These results indicate that nisin and bovicin HC5 react differently with the cell surfaces of Gram-positive bacteria. Proprietary or names are necessary to report factually on available data; however, the United States Department of Agriculture (USDA) neither guarantees nor warrants the standard of the product, and the use of the name by the USDA implies no approval of the product, and exclusion of others that may be suitable.     

Lactococcal membrane-permeabilizing antimicrobial peptides

A number of lactococcal antimicrobial peptides, bacteriocins have been discovered and characterized. Since Lactococcus spp. are generally regarded as safe bacteria, their bacteriocins are expected for various application uses. Most of lactococcal bacteriocins exert antimicrobial activity via membrane permeabilization. The most studied and prominent bacteriocin, nisin A is characterized in the high activity and has been utilized as food preservatives for more than half a century. Recently, other lactococcal bacteriocins such as lacticin Q were found to have distinguished features for further applications as the next generation to nisin.     

Issues in determining factors influencing bacterial attachment: a review using the attachment of Escherichia coli to abiotic surfaces as an example

The emergence of an increasing number of antibiotic resistant human clinical bacteria has been a great cause of concern for the last decades. As an example, Staphylococcus aureus isolates in the hospital environment are becoming more and more resistant to antibiotics including vancomycin which is considered as a last line of defence in treatment of Staphylococcus aureus -resistant methicillin. On the other hand, food safety is threatened by development of pathogenic bacteria including Listeria monocytogenes, Campylobacter jejuni, Salmonella enteritidis, Escherichia coli O157:H7 and Staphylococcus aureus. The use of antimicrobial peptides such as glycopeptides, semi-synthetic peptides, bacteriocins including lantibiotics offers a hope to face these clinical and food microbiology concerns. Clinical approval of new chemotherapeutic agents requires a long period of time. Research on bacteriocins has demonstrated potential use to fight against undesired foodborne pathogens but the use industrial use of bacteriocins is limited. To date only lantibiotic nisin and in class IIa bacteriocin Pediocin PA-1 are legally used as food preservative in many countries. The present minireview is focused on divercin V41 (DvnV41), a class IIa bacteriocin naturally produced by Carnobacterium divergens V41. The last decade has been the witness of intensive investigations carried out on this cationic peptide tempting to answer multiple questions covering basic and applied aspects. DvnV41 has shown a wide spectrum of activity either alone or in combination with nisin and/or polymixins (synergistic effect). This outcome indicates that Cb. divergens V41 could potentially be used for safe and efficient prevention of L. monocytogenes growth in cold smoked salmon.     

The continuing story of class IIa bacteriocins.

Many bacteria produce antimicrobial peptides, which are also referred to as peptide bacteriocins. The class IIa bacteriocins, often designated pediocin-like bacteriocins, constitute the most dominant group of antimicrobial peptides produced by lactic acid bacteria. The bacteriocins that belong to this class are structurally related and kill target cells by membrane permeabilization. Despite their structural similarity, class IIa bacteriocins display different target cell specificities. In the search for new antibiotic substances, the class IIa bacteriocins have been identified as promising new candidates and have thus received much attention. They kill some pathogenic bacteria (e.g., Listeria) with high efficiency, and they constitute a good model system for structure-function analyses of antimicrobial peptides in general. This review focuses on class IIa bacteriocins, especially on their structure, function, mode of action, biosynthesis, bacteriocin immunity, and current food applications. The genetics and biosynthesis of class IIa bacteriocins are well understood. The bacteriocins are ribosomally synthesized with an N-terminal leader sequence, which is cleaved off upon secretion. After externalization, the class IIa bacteriocins attach to potential target cells and, through electrostatic and hydrophobic interactions, subsequently permeabilize the cell membrane of sensitive cells. Recent observations suggest that a chiral interaction and possibly the presence of a mannose permease protein on the target cell surface are required for a bacteria to be sensitive to class IIa bacteriocins. There is also substantial evidence that the C-terminal half penetrates into the target cell membrane, and it plays an important role in determining the target cell specificity of these bacteriocins. Immunity proteins protect the bacteriocin producer from the bacteriocin it secretes. The three-dimensional structures of two class IIa immunity proteins have been determined, and it has been shown that the C-terminal halves of these cytosolic four-helix bundle proteins specify which class IIa bacteriocin they protect against.     

Microbial production of bacteriocins: Latest research development and applications

Bacteriocins are low molecular weight peptides secreted by the predator bacterial cells to kill sensitive cells present in the same ecosystem competing for food and other nutrients. Exceptionally few bacteriocins along with their native antibacterial property also exhibit additional anti-viral and anti-fungal properties. Bacteriocins are generally produced by Gm+, Gm– and archaea bacteria. Bacteriocins from Gm?+?bacteria especially from lactic acid bacteria (LAB) have been thoroughly investigated considering their great biosafety and broad industrial applications. LAB expressing bacteriocins were isolated from fermented milk and milk products, rumen of animals and soil using deferred antagonism assay. Nisin is the only bacteriocin that has got FDA approval for application as a food preservative, which is produced by Lactococcus lactis subsp. Lactis. Its crystal structure explains that its antimicrobial properties are due to the binding of NH₂ terminal to lipid II molecule inhibiting the peptidoglycan synthesis and carboxy terminal forming pores in bacterial cell membrane leading to cell lysis. The hinge region connecting NH₂ and carboxy terminus has been mutated to generate mutant variants with higher antimicrobial activity. In a 50 ton fermentation of the mutant strain 3807 derived from L. lactis subsp. lactis ATCC 11454, 9,960?IU/mL of nisin was produced. Currently, high purity of nisin (>99%) is very expensive and hardly commercially available. Development of more advanced tools for cost-effective separation and purification of nisin would be commercially attractive. Chemical synthesis and heterologous expression of bacteriocins ended in low yields of pure proteins. At present, bacteriocins are almost solely applied in food industries, but they have a great potential to be used in other fields such as feeds, organic fertilizers, environmental protection and personal care products. The future of bacteriocins is largely dependent on getting FDA approval for use of other bacteriocins in addition to nisin to promote the research and applications.     

Structural analysis and characterization of lacticin Q, a novel bacteriocin belonging to a new family of unmodified bacteriocins of gram-positive bacteria

Lactococcus lactis QU 5 isolated from corn produces a novel bacteriocin, termed lacticin Q. By acetone precipitation, cation-exchange chromatography, and reverse-phase high-performance liquid chromatography, lacticin Q was purified from the culture supernatant of this organism, and its molecular mass was determined to be 5,926.50 Da by mass spectrometry. Subsequent analyses of amino acid and DNA sequences revealed that lacticin Q comprised 53 amino acid residues and that its N-terminal methionine residue was formylated. In contrast to most bacteriocins produced by gram-positive bacteria, lacticin Q had no N-terminal extensions such as leader or signal sequences. It showed 66% and 48% identity to AucA, a hypothetical protein from Corynebacterium jeikeium plasmid pA501, and aureocin A53, a bacteriocin from Staphylococcus aureus A53, respectively. The characteristics of lacticin Q were determined and compared to those of nisin A. Similar to nisin A, lacticin Q exhibited antibacterial activity against various gram-positive bacteria. Lacticin Q was very stable against heat treatment and changes in pH; in particular, it was stable at alkaline pH values, while nisin A was inactivated. Moreover, lacticin Q induced ATP efflux from a Listeria sp. strain in a shorter time and at a lower concentration than nisin A, indicating that the former affected indicator cells in a different manner from that of the latter. The results described here clarified the fact that lacticin Q belongs to a new family of class II bacteriocins and that it can be employed as an alternative to or in combination with nisin A.     

Intra-specific variation of Lactobacillus plantarum and Lactobacillus pentosus in sensitivity towards various bacteriocins

Fifty-two strains belonging to the Lactobacillus plantarum species group were identified and typed. They represented 32 clones of Lactobacillus plantarum and 7 clones of Lactobacillus pentosus. Sensitivity of all strains towards bacteriocins of four different producer strains was investigated using a deferred inhibition test (DIT). Substantial intra-specific variation in sensitivity of clones was observed towards bacteriocinogenic lactic acid bacteria producing nisin ( Lactococcus lactis ATCC 11454) or pediocin PA-1 ( Pediococcus acidilactici PAC-1.0), while none of the strains were sensitive towards the two remaining bacteriocin producers. The minimum inhibitory concentration (MIC) of nisin towards selected strains confirmed the DIT results. No correlation between the susceptibility of fourteen selected strains towards nisin and an array of antibiotics was found. The present study indicates that the variation in bacteriocin-sensitivity within target species might be a potential limitation for the application of bacteriocins as biopreservatives.     

Distribution and Genetic Diversity of Bacteriocin Gene Clusters in Rumen Microbial Genomes

Some species of ruminal bacteria are known to produce antimicrobial peptides, but the screening procedures have mostly been based on in vitro assays using standardized methods. Recent sequencing efforts have made available the genome sequences of hundreds of ruminal microorganisms. In this work, we performed genome mining of the complete and partial genome sequences of 224 ruminal bacteria and 5 ruminal archaea to determine the distribution and diversity of bacteriocin gene clusters. A total of 46 bacteriocin gene clusters were identified in 33 strains of ruminal bacteria. Twenty gene clusters were related to lanthipeptide biosynthesis, while 11 gene clusters were associated with sactipeptide production, 7 gene clusters were associated with class II bacteriocin production, and 8 gene clusters were associated with class III bacteriocin production. The frequency of strains whose genomes encode putative antimicrobial peptide precursors was 14.4%. Clusters related to the production of sactipeptides were identified for the first time among ruminal bacteria. BLAST analysis indicated that the majority of the gene clusters (88%) encoding putative lanthipeptides contained all the essential genes required for lanthipeptide biosynthesis. Most strains of Streptococcus (66.6%) harbored complete lanthipeptide gene clusters, in addition to an open reading frame encoding a putative class II bacteriocin. Albusin B-like proteins were found in 100% of the Ruminococcus albus strains screened in this study. The in silico analysis provided evidence of novel biosynthetic gene clusters in bacterial species not previously related to bacteriocin production, suggesting that the rumen microbiota represents an underexplored source of antimicrobial peptides.     

Susceptibility and resistance of ruminal bacteria to antimicrobial feed additives

Susceptibility and resistance of ruminal bacterial species to avoparcin, narasin, salinomycin, thiopeptin, tylosin, virginiamycin, and two new ionophore antibiotics, RO22-6924/004 and RO21-6447/009, were determined. Generally, antimicrobial compounds were inhibitory to gram-positive bacteria and those bacteria that have gram-positive-like cell wall structure. MICs ranged from 0.09 to 24.0 micrograms/ml. Gram-negative bacteria were resistant at the highest concentration tested (48.0 micrograms/ml). On the basis of their fermentation products, ruminal bacteria that produce lactic acid, butyric acid, formic acid, or hydrogen were susceptible and bacteria that produce succinic acid or ferment lactic acid were resistant to the antimicrobial compounds. Selenomonas ruminantium was the only major lactic acid-producing bacteria resistant to all the antimicrobial compounds tested. Avoparcin and tylosin appeared to be less inhibitory (MIC greater than 6.0 micrograms/ml) than the other compounds to the two major lactic acid-producing bacteria, Streptococcus bovis and Lactobacillus sp. Ionophore compounds seemed to be more inhibitory (MIC, 0.09 to 1.50 micrograms/ml) than nonionophore compounds (MIC, 0.75 to 12.0 micrograms/ml) to the major butyric acid-producing bacteria. Treponema bryantii, an anaerobic rumen spirochete, was less sensitive to virginiamycin than to the other antimicrobial compounds. Ionophore compounds were generally bacteriostatic, and nonionophore compounds were bactericidal. The specific growth rate of Bacteroides ruminicola was reduced by all the antimicrobial compounds except avoparcin. The antibacterial spectra of the feed additives were remarkably similar, and it appears that MICs may not be good indicators of the potency of the compounds in altering ruminal fermentation characteristics.     

Susceptibility and resistance of ruminal bacteria to antimicrobial feed additives.

Susceptibility and resistance of ruminal bacterial species to avoparcin, narasin, salinomycin, thiopeptin, tylosin, virginiamycin, and two new ionophore antibiotics, RO22-6924/004 and RO21-6447/009, were determined. Generally, antimicrobial compounds were inhibitory to gram-positive bacteria and those bacteria that have gram-positive-like cell wall structure. MICs ranged from 0.09 to 24.0 micrograms/ml. Gram-negative bacteria were resistant at the highest concentration tested (48.0 micrograms/ml). On the basis of their fermentation products, ruminal bacteria that produce lactic acid, butyric acid, formic acid, or hydrogen were susceptible and bacteria that produce succinic acid or ferment lactic acid were resistant to the antimicrobial compounds. Selenomonas ruminantium was the only major lactic acid-producing bacteria resistant to all the antimicrobial compounds tested. Avoparcin and tylosin appeared to be less inhibitory (MIC greater than 6.0 micrograms/ml) than the other compounds to the two major lactic acid-producing bacteria, Streptococcus bovis and Lactobacillus sp. Ionophore compounds seemed to be more inhibitory (MIC, 0.09 to 1.50 micrograms/ml) than nonionophore compounds (MIC, 0.75 to 12.0 micrograms/ml) to the major butyric acid-producing bacteria. Treponema bryantii, an anaerobic rumen spirochete, was less sensitive to virginiamycin than to the other antimicrobial compounds. Ionophore compounds were generally bacteriostatic, and nonionophore compounds were bactericidal. The specific growth rate of Bacteroides ruminicola was reduced by all the antimicrobial compounds except avoparcin. The antibacterial spectra of the feed additives were remarkably similar, and it appears that MICs may not be good indicators of the potency of the compounds in altering ruminal fermentation characteristics.