A method for predicting maximal strength in collegiate women athletes

The purpose of this study was to develop a regression equation capable of accurately predicting a 1 repetition maximum bench press in collegiate women athletes. The findings of this study could benefit future women athletes by providing coaches and trainers with an easy method of determining maximum upper body strength in women athletes. Sixty-five University of Georgia NCAA Division 1 women athletes from 9 different sports were measured prior to the start of their season utilizing 2 repetition tests to fatigue (25 kg: REPS55; 31.8 kg: REPS70) and a 1 repetition maximum (1RM) bench press test in random order. Other independent variables that were used with a submaximal weight to predict 1RM were total body weight, lean body mass (LBM), height, and percent body fat. The variables of REPS70 and LBM were the best predictors of 1RM utilizing Pearson product correlations (r = 0.909, p = 0.000; r = 0.445, p = 0.000) and multiple regression results (R(2) = 0.834, p = 0.000) for this population. The results from this study indicate muscular endurance repetitions using an absolute weight of 31.8 kg in conjunction with LBM can be used to accurately predict 1RM bench press strength in collegiate women athletes.     

Prediction of one repetition maximum strength from multiple repetition maximum testing and anthropometry

The purpose of this study was to quantify the decrease in the load lifted from 1 to 5, 10, and 20 repetitions to failure for the flat barbell bench press (chest press; CP) and plate-loaded leg press (LP). Furthermore, we developed prediction equations for 1 repetition maximum (RM) strength from the multiple RM tests, including anthropometric data, gender, age, and resistance training volume. Seventy subjects (34 men, 36 women), 18-69 years of age, completed 1, 5, 10, and 20RM testing for each of the CPs and LPs. Regression analyses of mean data revealed a nonlinear decrease in load with increasing repetition number (CP: linear S(y.x) = 2.6 kg, nonlinear S(y.x) = 0.2 kg; LP: linear S(y.x) = 11.0 kg, nonlinear S(y.x) = 2.6 kg, respectively). Multiple regression analyses revealed that the 5RM data produced the greatest prediction accuracy, with R(2) data for 5, 10, and 20RM conditions being LP: 0.974, 0.933, 0.915; CP: 0.993, 0.976, and 0.955, respectively. The regression prediction equations for 1RM strength from 5RM data were LP: 1RM = 1.0970 x (5RM weight [kg]) + 14.2546, S(y.x) = 16.16 kg, R(2) = 0.974; CP: 1RM = 1.1307 x (5RM weight) + 0.6999, S(y.x) = 2.98 kg, R(2) = 0.993. Dynamic muscular strength (1RM) can be accurately estimated from multiple repetition testing. Data reveal that no more than 10 repetitions should be used in linear equations to estimate 1RM for the LP and CP actions.     

Training state improves the relationship between rating of perceived exertion and relative exercise volume during resistance exercises

ABSTRACT: Testa, M, Noakes, TD, and Desgorces, F-D. Training state improves the relationship between rating of perceived exertion and relative exercise volume during resistance exercises. J Strength Cond Res 26(11): 2990-2996, 2012-The aim of this study was to investigate how the rating of perceived exertion (RPE) during resistance exercises was influenced by the exercise volume and athletes' training state. Eighty physical education students (well trained, less well trained, and novices) rated their perceived exertion of multilift sets using the category-ratio scale. These sets were performed with moderate (60-80% of 1-repetition maximum [1RM]) and heavy loads (80-100% of 1RM) involving low volume of exercise (5.5 ± 1.1 reps for moderate and 1.3 ± 0.4 reps for the heavy load) and high volume of exercise (moderate load: 17.5 ± 2.1 reps; high load: 2.9 ± 0.6 reps). The exercise volume of the sets was expressed relatively to individual maximal capacities using the maximum number of repetition (MNR) for the load lifted. General linear model describes that RPE was related to MNR % with a training state effect (p < 0.01) observed only for sets involving a low MNR % and without effect of absolute volume and exercise intensity (high MNR sets: adjusted R = 0.65 and 0.78 and low MNR sets adjusted R = 0.37 and 0.34 in low MNR tests). High standard errors of estimated relative volume appeared when using the RPE from low exercise volume sets (12.8 and 14.4% of actual relative volume). Coaches should consider the RPE resulting from high exercise-induced physical strain to estimate the actual relative volume and to estimate the individual MNR at a given load.     

Prediction of 1 repetition maximum in high-school power lifters

Eighteen elite male power lifters performed 1-repetition maximum (1RM) and submaximal strength tests (70, 80, and 90% 1RM) to develop prediction equations for the squat (SQ), bench press (BP), and deadlift (DL) exercises. For each equation, stepwise multiple-regression prediction procedure included the maximum number of repetitions (REPS) completed at a given %1RM weight (REPWT). For SQ and BP the 70% 1RM yielded the best 1RM prediction equations: (1RM SQ [kg]) = 159.9 + (0.103 x REPS x REPWT) + (-11.552 x REPS), with a standard error of the estimate (SEE) of 5.06 kg; (1RM BP [kg]) = 90.66 + (0.085 x REPS x REPWT) + (-5.306 x REPS), with an SEE of 2.69 kg. For DL the 80% 1RM yielded the best prediction equation: (1RM DL [kg]) = 156.08 + (0.098 x REPS x REPWT) + (-12.106 x REPS), with an SEE of 4.97 kg. The athlete's years lifted (number of years of power lifting experience) was highly correlated with the 1RM strength for BP and DL (r > 0.70) but not for SQ (r < 0.70). No bodily structural dimension variable had a significant correlation with 1RM strength (r < 0.70). The results of this study indicate that 1RM SQ, BP, and DL may be predicted with an acceptable degree of accuracy in elite male high-school power lifter subjects.     

Ratings of perceived exertion and muscle activity during the bench press exercise in recreational and novice lifters

This study examined ratings of perceived exertion (RPE) and electromyography (EMG) during resistance exercise in recreational and novice lifters. Fourteen novice (age = 21.5 +/- 1.5 years) and 14 recreationally trained (age = 21.9 +/- 2.2 years) women volunteered to perform the bench press exercise at 60 and 80% of their 1 repetition maximum (1RM). RPE and EMG were measured during both intensities. Statistical analyses revealed that active muscle RPE increased as resistance exercise intensity increased from 60% 1RM to 80% 1RM (12.32 +/- 1.81 vs. 15.14 +/- 1.74). Integrated EMG also increased as resistance exercise intensity increased from 60% 1RM to 80% 1RM (in the pectoralis major; 98.62 +/- 17.54 vs. 127.98 +/- 29.02). No significant differences in RPE or EMG were found between novice and recreational lifters. These results indicate that RPE is related to the relative exercise intensity lifted as well as muscle activity during resistance exercise for both recreational and novice lifters. These results support the use of RPE as a method of resistance exercise intensity estimation for both types of lifters.     

NFL-225 Test to Predict 1RM Bench Press in NCAA Division I Football Players

ABSTRACT: Mann, JB, Stoner, JD, and Mayhew, JL. NFL-225 test to predict 1RM bench press in NCAA Division I football players. J Strength Cond Res 26(10): 2623-2631, 2012-The National Football League (NFL)-225 test has gained popularity for assessing muscular performance among college football programs. Although the test is a measure of absolute muscular endurance, it was reputed to be highly correlated with maximum muscular strength. The purposes of this study were to assess the predictive potential of the NFL-225 test for estimating 1 repetition maximum (1RM) bench press performance in National Collegiate Athletic Association Division I college football players and to evaluate the accuracy of previous NFL-225 prediction equations. Players (n = 289) in a successful Division I program were assessed over a period of 5 years for 1RM bench press and repetitions completed with 102.3 kg (225 lb). Test sessions occurred within 1 week of each other during the off-season training period. In a validation group (n = 202), repetitions were significantly correlated with 1RM (r = 0.95), producing a prediction equation (1RM [kg] = 103.5 + 3.08 Reps) with a standard error of estimate = 6.4 kg (coefficient of variation = 4.3%). In a randomly selected cross-validation group (n = 87), the new equation nonsignificantly underpredicted by 0.9 ± 7.2 kg produced a high correlation with actual 1RM (intraclass correlation coefficient [ICC] = 0.967), had a limit of agreement of -15.0 to 13.2 kg, and predicted 69% of the group within ±4.5 kg of their actual 1RM. The best previous equation was that of Slovak et al., which was nonsignificantly underpredicted by -0.5 ± 6.7 kg, produced a high correlation with actual 1RM (ICC = 0.975), and predicted 68% of the group within ±4.5 kg of their actual 1RM. The new NFL-225 test seems to be a reasonable predictor of 1RM bench press in Division I players but should be further assessed on players from other high-level programs.     

Estimation of peak vertical velocity and relative load changes by subjective measures in weightlifting movements

To investigate the ability of the OMNI-RES (0–10) scale to estimate velocity and loading changes during sets to failure in the hang power clean (HPC) exercise. Eleven recreationally resistance-trained males (28.5 ± 3.5 years) with an average one-repetition maximum (1RM) value of 1.1 ± 0.07 kg body mass^-1 in HPC, were assessed on five separate days with 48 hours of rest between sessions. After determining the 1RM value, participants performed four sets to self-determined failure with the following relative loading ranges: 60% < 70%, 70 < 80%, 80 < 90% and > 90%. The peak vertical velocity (PVV), and Rating of Perceived Exertion (RPE) were measured for every repetition of each set. The RPE expressed after the first repetition (RPE-1) and when the highest value of PVV was achieved during the set (RPE-max) were similar and significantly lower than the RPE associated with a 5% (RPE-5%) and 10% (RPE-10%) drop in PVV. In addition, the RPE produced at failure was similar to RPE-5% only for the heaviest range (≥ 90%). Furthermore, RPE-1 was useful to distinguish loading zones between the four assessed ranges (60 < 70%, vs. 70 < 80%, vs. 80 < 90%, vs. ≥ 90%). The RPE seems to be useful to identify PVV changes (maximal, 5% and 10% drop) during continuous sets to self-determined failure and to distinguish 10% loading zone increments, from 60 to 100% of 1RM in the HPC exercise.     

Accuracy of prediction equations for determining one repetition maximum bench press in women before and after resistance training

Repetitions to fatigue (RTF) using less than a 1 repetition maximum (1RM) load (RepWt) have been shown to be a good predictor of 1RM strength in men, but such information is scarce in women. The purpose of this study was to evaluate the accuracy of current prediction equations to estimate 1RM bench press performance and to determine whether resistance training changes the capability to predict 1RM from muscular endurance repetitions in young women. Members (n = 103) of a required wellness course were measured for 1RM bench press and RTF using randomly assigned percentages between 60% and 90% of the 1RM (RepWt) before and after 12 weeks of progressive resistance training. The %1RM used to perform RTF remained the same for each individual after training (75.6% +/- 10.3%) as before. One repetition maximum bench press increased significantly after training (28% +/- 21%). Although the change in the group average for RTF (0.6 +/- 6.1) was not significant, the correlation between pretraining and posttraining RTF was moderate (r = 0.66; p < 0.01), and individual differences in percentage change in RTF were substantial (27% +/- 99%). The percentage change in 1RM was not significantly related to initial 1RM (r = -0.05), but it was negatively related to the change in RTF (r = -0.40; p < 0.01). Prediction equations were more accurate in the pretraining and posttraining conditions, in which fewer than 10 RTF were used. Resistance training may alter the relationship between strength and muscle endurance across a wide range of RTF in young women without compromising the accuracy of predicting maximal strength.     

The relationship between maximal repetition performance and muscle fiber type as estimated by noninvasive technique in the quadriceps of untrained women

The purpose of this investigation was to establish a relationship between the number of repetitions an individual can complete at a predetermined load and their percentage of type II muscle fibers in their quadriceps. Subjects included 22 untrained women between the ages of 18 and 35. Day 1 consisted of noninvasive anthropologic testing, 1 repetition maximum (1RM) testing, and recording repetition performance at 70% 1RM. Day 2 consisted of isokinetic dynamometry to determine muscle fiber composition. Results were obtained and analyzed using the Pearson product correlation coefficient (r). The results demonstrated a fair-to-moderate relationship (Pearson r = -0.48, p = 0.02) that individuals with greater percentages of type II muscle fibers performed fewer repetitions at 70% 1RM. The results of this study demonstrate that muscle fiber type composition is an important variable to consider when designing training or rehabilitation programs.     

Comparison of early phase adaptations for traditional strength and endurance, and low velocity resistance training programs in college-aged women

The purpose of this study was to investigate the effects of a six-week (16-17 training sessions) low velocity resistance training program (LV) on various performance measures as compared to a traditional strength (TS) and a traditional muscular endurance (TE) resistance training program. Thirty-four healthy adult females (21.1 +/- 2.7 y) were randomly divided into 4 groups: control (C), TS, TE, and LV. Workouts consisted of 3 exercises: leg press (LP), back squat (SQ), and knee extension (KE). Each subject was pre- and posttested for 1 repetition maximum (1RM), muscular endurance, maximal oxygen consumption (VO2max), muscular power, and body composition. After the pretesting, TS, TE, and LV groups attended a minimum of 16 out of 17 training sessions in which the LP, SQ, and KE were performed to fatigue for each of 3 sets. For each training session, TS trained at 6-10 RM and TE trained at 20-30 RM both with 1-2 second concentric/1-2 second eccentric; and LV trained at 6-10 RM, with 10 second concentric/4 s eccentric. Statistical significance was determined at an alpha level of 0.05. LV increased relative LP and KE 1 RM, but the percent increase was smaller than TS, and not different from C in the SQ. For muscular endurance, LV improved similarly to TE for LP and less than TS and TE for KE. Body composition improved for all groups including C (significant main effect). In conclusion, muscular strength improved with LV training however, TS showed a larger improvement. Muscular endurance improved with LV training, but not above what TE or TS demonstrated. For all other variables, there were no significant improvements for LV beyond what C demonstrated.     

Influence of exercise order on the number of repetitions performed and perceived exertion during resistance exercise in women

The purpose of this study was to investigate the influence of different resistance exercise orders on the number of repetitions performed to failure and on the ratings of perceived exertion (RPE) in trained women. Twenty-three women with a minimum of 2 years of resistance training experience volunteered to participate in the study (age, 24.2 +/- 4.5 years; weight, 56.9 +/- 4.7 kg; height, 162.3 +/- 5.9 cm; percent body fat, 18.2 +/- 2.9%; body mass index, 22.2 +/- 2 kg x m(-2)). Data were collected in 2 phases: (a) determination of a 1 repetition maximum (1RM) for the leg-press (LP), bench press (BP), leg extension (LE), seated machine shoulder press (SP), leg curl (LC), and seated machine triceps extension (TE); and (b) execution of 3 sets, with 2-minute rest intervals between sets and exercises, until fatigue using 80% of 1RM in 2 exercise sequences of the exact opposite order--Sequence A: BP, SP, TE, LP, LE, and LC, and Sequence B: LC, LE, LP, TE, SP, and BP. The RPE (Borg CR-10) was accessed immediately after each sequence and analyzed using a Wilcoxon test. A 2-way analysis of variance with repeated measurements, followed by a post hoc Fisher least significant difference test where indicated was used to analyze the number of repetitions per set of each exercise during the 2 sequences. The RPE was not significantly different between the sequences. The mean number of repetitions per set was always less when an exercise was performed later in the exercise sequence. The data indicate that in trained women, performance of both large- and small-muscle group exercises is affected by exercise sequence.     

The effects of training volume and competition on the salivary cortisol concentrations of Olympic weightlifters

This study examined the effects of training volume and competition on the salivary cortisol (Sal-C) concentrations of Olympic weightlifters. Male (n = 5) and female (n = 4) Olympic weightlifters provided saliva samples across a 5-week experimental = period. The first aim was to assess the weekly effects of high (≥ 200 sets) and low (≤ 100 sets) training volume on Sal-C. The second aim was to compare Sal-C concentrations and 1 repetition maximum (1RM) performance during 2 simulated and 2 actual competitions. Performance was assessed using the snatch, clean and jerk, and the Olympic total lift. Data from each competition setting were pooled before analysis. There were no significant weekly changes in Sal-C levels (p > 0.05). The actual competitions produced higher (128-130%) Sal-C concentrations (p < 0.001) and superior 1RM lifts (1.9-2.6%) for the clean and jerk, and the Olympic total, than the simulated competitions (p < 0.05). Individual Sal-C concentrations before the simulated competitions were positively correlated to all of the 1RM lifts (r = 0.48-0.49, p < 0.05). In conclusion, actual competitions produced greater Sal-C responses than simulated competitions, and this appeared to benefit the 1RM performance of Olympic weightlifters. Individuals with higher Sal-C concentrations also tended to exhibit superior 1RM lifts during the simulated competitions. Given these findings, greater emphasis should be placed upon the monitoring of C to establish normative values, training standards and to assist with performance prediction.     

Kettlebell swing training improves maximal and explosive strength

The aim of this study was to establish the effect that kettlebell swing (KB) training had on measures of maximum (half squat-HS-1 repetition maximum [1RM]) and explosive (vertical jump height-VJH) strength. To put these effects into context, they were compared with the effects of jump squat power training (JS-known to improve 1RM and VJH). Twenty-one healthy men (age = 18-27 years, body mass = 72.58 ± 12.87 kg) who could perform a proficient HS were tested for their HS 1RM and VJH pre- and post-training. Subjects were randomly assigned to either a KB or JS training group after HS 1RM testing and trained twice a week. The KB group performed 12-minute bouts of KB exercise (12 rounds of 30-second exercise, 30-second rest with 12 kg if <70 kg or 16 kg if >70 kg). The JS group performed at least 4 sets of 3 JS with the load that maximized peak power-Training volume was altered to accommodate different training loads and ranged from 4 sets of 3 with the heaviest load (60% 1RM) to 8 sets of 6 with the lightest load (0% 1RM). Maximum strength improved by 9.8% (HS 1RM: 165-181% body mass, p < 0.001) after the training intervention, and post hoc analysis revealed that there was no significant difference between the effect of KB and JS training (p = 0.56). Explosive strength improved by 19.8% (VJH: 20.6-24.3 cm) after the training intervention, and post hoc analysis revealed that the type of training did not significantly affect this either (p = 0.38). The results of this study clearly demonstrate that 6 weeks of biweekly KB training provides a stimulus that is sufficient to increase both maximum and explosive strength offering a useful alternative to strength and conditioning professionals seeking variety for their athletes.     

Higher muscle performance in adolescents compared with adults after a resistance training session with different rest intervals

The aim of the present study was to compare the effect of 3 different rest intervals between sets on the total training volume, number of repetitions, ratings of perceived exertion (RPE), and resistance to fatigue in adolescents and adults during a resistance training session in the isoinertial chest press exercise. Fifteen male adolescents (15.2 ± 1.2 years; 20.7 ± 2.0 kg·m(-2); Tanner -4; 61.5 ± 8.9, 10 repetition maximum [RM]) and 15 adults (22.2 ± 2.7 years; 23.3 ± 2.0 kg·m(-2); Tanner -5; 84.3 ± 13.5, 10RM) without previous experience with resistance training participated in the study. After 10RM test-retest on 3 different occasions, participants were randomly assigned to a resistance training protocol with 30-, 60-, and 120-second rest interval between sets. The protocol consisted of 3 sets with 10RM. In all studied variables, with exception to total training volume and RPE, adolescents presented superior results as compared with adults (p < 0.001). On the other hand, both adults and adolescents exhibited a higher resistance to fatigue, total training volume, and number of repetitions with a longer rest interval (120 > 60 > 30 seconds) (p < 0.01). Thus, these results indicate that adolescents present a higher recovery capacity between sets in a resistance training session than adults and a longer rest interval results in a higher number of repetitions completed, total training volume, and resistance to fatigue.     

Effect of unilateral and bilateral resistance exercise on maximal voluntary strength,total volume of load lifted,and perceptual and metabolic responses

The present study investigated the effect of unilateral and bilateral resistance exercise (RE) on maximal voluntary strength, total volume of load lifted (TVLL), rating of perceived exertion (RPE) and blood lactate concentration of resistance-trained males. Twelve healthy men were assessed for the leg extension one-repetition maximum (1RM) strength using bilateral and unilateral contractions. Following this assessment, an RE session (3 sets of repetitions to failure) was conducted with bilateral and unilateral (both limbs) contractions using a load of 50% 1RM. The TVLL was calculated by the product of the number of repetitions and the load lifted per repetition. RPE and blood lactate were measured before, during and after each set. Session RPE was measured 30 minutes after RE sessions. There was a significant difference in the bilateral (120.0±11.9) and unilateral (135.0±20.2 kg) 1RM strength (p < 0.05). The TVLL was similar between both RE sessions. Although the repetitions decreased with each successive set, the total number of repetitions completed in the bilateral protocol (48) was superior to the unilateral (40) protocol (p < 0.05). In both bouts, RPE increased with each subsequent set whilst blood lactate increased after set 1 and thereafter remained stable (p < 0.05). The RPE and lactate responses were not significantly different between both sessions. In conclusion, a bilateral deficit in leg extension strength was confirmed, but the TVLL was similar between both RE sessions when exercising to voluntary fatigue. This outcome could be attributed to the number of repetitions completed in the unilateral RE bout. The equal TVLL would also explain the similar perceptual and metabolic responses across each RE session.     

Effectiveness of the 1RM estimation method based on isometric squat using a back-dynamometer

This study aimed to clarify the relationships between isometric squat (IS) using a back dynamometer and 1 repetition maximum (1RM) squat for maximum force and muscle activities and to examine the effectiveness of a 1RM estimation method based on IS. The subjects were 15 young men with weight training experience (mean age 20.7 ± 0.8 years, mean height 171.3 ± 4.4 cm, mean weight 64.4 ± 8.4 kg). They performed the IS with various stance widths and squat depths. The measured data of exerted maximum force and the action potential of the agonist muscles were compared with the 1RM squat data. The exerted maximum force during IS was significantly larger in wide stance (140% shoulder width) than in narrow stance (5-cm width). The maximum force was significantly larger with decreased knee flexion. As for muscle activity, the % root mean square value of muscle electric potential of the rectus femoris and the vastus lateralis tended to be higher in wide stance. As for exerted maximum force, wide stance and parallel depth in IS showed a significant and high correlation (r = 0.73) with 1RM squat. Simple linear regression analysis revealed a significant estimated regression equation [Y = 0.992X + 30.3 (Y:1RM, X:IS)]. However, the standard error of an estimate value obtained by the regression equation was very large (11.19 kg). In conclusion, IS with wide stance and parallel depth may be useful for the estimation of 1RM squat. However, estimating a 1RM by IS using a back dynamometer may be difficult.     

Muscle glycogenolysis during differing intensities of weight-resistance exercise

Skeletal muscle glycogen metabolism was investigated in eight male subjects during and after six sets of 70% one repetition maximum (1 RM, I-70) and 35% 1 RM (I-35) intensity weight-resistance leg extension exercise. Total force application to the machine lever arm was determined via a strain gauge and computer interfaced system and was equated between trials. Compared with the I-70 trial, the I-35 trial was characterized by almost double the repetitions (13 +/- 1 vs. 6 +/- 0) and half the peak concentric torque for each repetition (12.4 +/- 0.5 vs. 24.2 +/- 1.0 Nm). After the sixth set, muscle glycogen degradation was similar between I-70 and I-35 trials (47.0 +/- 6.6 and 46.6 +/- 6.0 mmol/kg wet wt, respectively), as was muscle lactate accumulation (13.8 +/- 0.7 and 16.7 +/- 4.2 mmol/kg wet wt, respectively). After 2 h of passive recovery without caloric intake, muscle glycogen increased by 22.2 +/- 6.8 and 14.2 +/- 2.5 mmol/kg wet wt in the I-70 and I-35 trials, respectively. Optical absorbance measurement of periodic acid-Schiff-stained muscle sections after the 2 h of recovery revealed larger absorbance increases in fast-twitch than in slow-twitch fibers (0.119 +/- 0.024 and 0.055 +/- 0.024, P = 0.02). Data indicated that when external work was constant, the absolute amount of muscle glycogenolysis was the same regardless of the intensity of resistance exercise. Nevertheless the rate of glycogenolysis during the I-70 trial was approximately double that of the I-35 trial.     

Anthropometric dimensions do not enhance one repetition maximum prediction from the NFL-225 test in college football players

The purpose of this study was to evaluate the contribution of anthropometric dimensions to improving the accuracy of repetitions-to-fatigue (RTF) using an absolute load of 225 lbs to predict 1 repetition maximum (1RM) bench press performance in college football players. Sixty-one players from an NCAA Division II team were evaluated for 1RM bench press performance, RTF using an absolute load of 225 lbs, and measured (5 skinfolds, 2 skeletal length, and 2 muscle circumferences). Anthropometric dimensions (percent fat, lean body mass, and arm cross-sectional areas) were derived at the conclusion of 8 weeks of heavy resistance training during the off-season. None of the anthropometric dimensions made a significant additional contribution to RTF (r = 0.96, SEE = 12.3 lbs) for predicting 1RM. Of the currently available NFL-225 prediction equations found in the literature nonsignificantly underestimated 1RM from RTF by an average of 1.1 lbs (+/-12.7 lbs), whereas 5 other RTF equations significantly overpredicted by 3.5-9.0 lbs (+/-12.2-14.1 lbs). Anthropometric dimensions neither reduced the error associated with prediction of 1RM bench press using the NFL-225 test in college football players nor do they explain why some players are significantly over- or underpredicted when using muscle endurance repetitions.     

Power and maximum strength relationships during performance of dynamic and static weighted jumps

The purpose of this study was to investigate the relationship of the 1 repetition maximum (1RM) squat to power output during countermovement and static weighted vertical squat jumps. The training experience of subjects (N = 22, 87.0 +/- 15.3 kg, 14.1 +/- 7.1% fat, 22.2 +/- 3.8 years) ranged from 7 weeks to 15+ years. Based on the 1RM squat, subjects were further divided into the 5 strongest and 5 weakest subjects (p 相似文献