Biological indicators for low temperature steam formaldehyde sterilization: effect of defined media on sporulation, germination index and moist heat resistance at 110dEC of Bacillus strains

Choice of a biological indicator depends upon selecting a strain with the optimum balance of desirable properties. Screening 20 strains of Bacillus spp. for sporulation on three defined media has shown the wide variation that occurs in requirements for sporulation and properties of the resultant spores. Comparison of germination index and moist heat resistance of resultant spores suggest that a combination of high germination index, high heat resistance and linear inactivation may not be possible.     

Comparison of the spores of Paenibacillus polymyxa prepared at different temperatures

Paenibacillus polymyxa SQR-21, which is antagonistic against Fusarium oxysporum, is used as a biocontrol agent and, when mixed with organic substances for solid fermentation, produces a bioorganic fertilizer. The spores of P. polymyxa prepared at different temperatures were characterized with respect to the dipicolinic acid content, heat resistance, fatty acid composition and germination. Spores prepared at 37°C showed higher heat resistance than those prepared at 25 and 30°C. However, the germination rate was negatively correlated with the sporulation temperature. The maximum germination rate of the spores prepared at 25°C was 1.3-times higher than the spores prepared at 30°C. The sporulation temperature thus affects the resistance and germination properties of P. polymyxa spores. These results are useful for the production of improved bio-organic fertilizer.     

Free proline content and sensitivity to desiccation and heat during yeast sporulation and spore germination.

Ascospores of a strain of Saccharomyces cerevisiae Hansen were less sensitive to desiccation and heat than vegetative cells. Desiccation resistance was acquired earlier during sporulation and lost later during spore germination than heat resistance. As spores matured, resistance to both stresses increased. With the exception of the first few hours in sporulation medium, when proline appeared to be utilized, the intracellular free proline content increased during sporulation and decreased during spore germination. Not all the proline lost could be detected in the germination medium, indicating that some was metabolically utilized by the germinating spores. Since exogenous proline supplied to vegetative or sporulating cells before desiccation increased their survival, it is suggested that the high level of free proline in mature spores may protect against desiccation stress.     

Germination properties as marker events characterizing later stages of Bacillus subtilis spore formation

At various stages during spore formation sporangia were shocked by cold treatment or with toluene, and the germination requirements of the prespores were examined. Up to 5 h after induction of sporulation (t5) germination was spontaneous; i.e., it occurred without any added germinants. After t5, during stages V and VI, the capacity for spontaneous germination diminished progressively, and the spores acquired a need for externally added germinants. At t6 this need was satisfied by either L-alanine or a mixture of KCl, glucose, and fructose. By t8, the latter response had disappeared. The spores germinated only with L-alanine, and the response was much slower. Experiments with chloramphenicol showed that the germination properties of the spores appearing between t6 and t8 were the expression of events in protein synthesis that had occurred before t5. Although the germination requirements developed at about the same time as heat resistance, they could be dissociated from heat resistance in wild-type and mutant cells. The germination properties of the developing spores are additional marker events characterizing the later stages of sporulation, as follows: (i) spontaneous germination (up to the end of stage IV); (ii) germination requirements that are satisfied by KCl-glucose-fructose or L-alanine (stage V); and (iii) slow germination response with L-alanine only (stage VI).     

The effect of acid shock on sporulating Bacillus subtilis cells

AIMS: To study the effect of acid shock in sporulation on the production of acid-shock proteins, and on the heat resistance and germination characteristics of the spores formed subsequently. METHODS AND RESULTS: Bacillus subtilis wild-type (SASP-alpha+beta+) and mutant (SASP-alpha-beta-) cells in 2 x SG medium at 30 degrees C were acid-shocked with HCl (pH 4, 4.3, 5 and 6 against a control pH of 6.2) for 30 min, 1 h into sporulation. The D85-value of B. subtilis wild-type (but not mutant) spores formed from sporulating cells acid-shocked at pH 5 increased from 46.5 min to 78.8 min, and there was also an increase in the resistance of wild-type acid-shocked spores at both 90 degrees C and 95 degrees C. ALA- or AGFK-initiated germination of pH 5-shocked spores was the same as that of non-acid-shocked spores. Two-dimensional gel electrophoresis showed only one novel acid-shock protein, identified as a vegetative catalase 1 (KatA), which appeared 30 min after acid shock but was lost later in sporulation. CONCLUSIONS: Acid shock at pH 5 increased the heat resistance of spores subsequently formed in B. subtilis wild type. The catalase, KatA, was induced by acid shock early in sporulation, but since it was degraded later in sporulation, it appears to act to increase heat resistance by altering spore structure. SIGNIFICANCE AND IMPACT OF THE STUDY: This is the first proteomic study of acid shock in sporulating B. subtilis cells. The increasing spore heat resistance produced by acid shock may have significance for the heat resistance of spores formed in the food industry.     

Characterization of Clostridium perfringens spores that lack SpoVA proteins and dipicolinic acid

Spores of Clostridium perfringens possess high heat resistance, and when these spores germinate and return to active growth, they can cause gastrointestinal disease. Work with Bacillus subtilis has shown that the spore's dipicolinic acid (DPA) level can markedly influence both spore germination and resistance and that the proteins encoded by the spoVA operon are essential for DPA uptake by the developing spore during sporulation. We now find that proteins encoded by the spoVA operon are also essential for the uptake of Ca(2+) and DPA into the developing spore during C. perfringens sporulation. Spores of a spoVA mutant had little, if any, Ca(2+) and DPA, and their core water content was approximately twofold higher than that of wild-type spores. These DPA-less spores did not germinate spontaneously, as DPA-less B. subtilis spores do. Indeed, wild-type and spoVA C. perfringens spores germinated similarly with a mixture of l-asparagine and KCl (AK), KCl alone, or a 1:1 chelate of Ca(2+) and DPA (Ca-DPA). However, the viability of C. perfringens spoVA spores was 20-fold lower than the viability of wild-type spores. Decoated wild-type and spoVA spores exhibited little, if any, germination with AK, KCl, or exogenous Ca-DPA, and their colony-forming efficiency was 10(3)- to 10(4)-fold lower than that of intact spores. However, lysozyme treatment rescued these decoated spores. Although the levels of DNA-protective alpha/beta-type, small, acid-soluble spore proteins in spoVA spores were similar to those in wild-type spores, spoVA spores exhibited markedly lower resistance to moist heat, formaldehyde, HCl, hydrogen peroxide, nitrous acid, and UV radiation than wild-type spores did. In sum, these results suggest the following. (i) SpoVA proteins are essential for Ca-DPA uptake by developing spores during C. perfringens sporulation. (ii) SpoVA proteins and Ca-DPA release are not required for C. perfringens spore germination. (iii) A low spore core water content is essential for full resistance of C. perfringens spores to moist heat, UV radiation, and chemicals.     

Effects of inactivation or overexpression of the sspF gene on properties of Bacillus subtilis spores.

Inactivation of the Bacillus subtilis sspF gene had no effect on sporulation, spore resistance, or germination in a wild-type strain or one lacking DNA protective alpha/beta-type small, acid-soluble proteins (SASP). Overexpression of SspF in wild-type spores or in spores lacking major alpha/beta-type SASP (alpha- beta- spores) had no effect on sporulation but slowed spore outgrowth and restored a small amount of UV and heat resistance to alpha- beta- spores. In vitro analyses showed that SspF is a DNA binding protein and is cleaved by the SASP-specific protease (GPR) at a site similar to that cleaved in alpha/beta-type SASP. SspF was also degraded during spore germination and outgrowth, and this degradation was initiated by GPR.     

Genome-Wide Transcriptional Profiling of Clostridium perfringens SM101 during Sporulation Extends the Core of Putative Sporulation Genes and Genes Determining Spore Properties and Germination Characteristics

The formation of bacterial spores is a highly regulated process and the ultimate properties of the spores are determined during sporulation and subsequent maturation. A wide variety of genes that are expressed during sporulation determine spore properties such as resistance to heat and other adverse environmental conditions, dormancy and germination responses. In this study we characterized the sporulation phases of C. perfringens enterotoxic strain SM101 based on morphological characteristics, biomass accumulation (OD₆₀₀), the total viable counts of cells plus spores, the viable count of heat resistant spores alone, the pH of the supernatant, enterotoxin production and dipicolinic acid accumulation. Subsequently, whole-genome expression profiling during key phases of the sporulation process was performed using DNA microarrays, and genes were clustered based on their time-course expression profiles during sporulation. The majority of previously characterized C. perfringens germination genes showed upregulated expression profiles in time during sporulation and belonged to two main clusters of genes. These clusters with up-regulated genes contained a large number of C. perfringens genes which are homologs of Bacillus genes with roles in sporulation and germination; this study therefore suggests that those homologs are functional in C. perfringens. A comprehensive homology search revealed that approximately half of the upregulated genes in the two clusters are conserved within a broad range of sporeforming Firmicutes. Another 30% of upregulated genes in the two clusters were found only in Clostridium species, while the remaining 20% appeared to be specific for C. perfringens. These newly identified genes may add to the repertoire of genes with roles in sporulation and determining spore properties including germination behavior. Their exact roles remain to be elucidated in future studies.     

Properties of Bacillus anthracis spores prepared under various environmental conditions

Bacillus anthracis makes highly stable, heat-resistant spores which remain viable for decades. Effect of various stress conditions on sporulation in B. anthracis was studied in nutrient-deprived and sporulation medium adjusted to various pH and temperatures. The results revealed that sporulation efficiency was dependent on conditions prevailing during sporulation. Sporulation occurred earlier in culture sporulating at alkaline pH or in PBS than control. Spores formed in PBS were highly sensitive towards spore denaturants whereas, those formed at 45°C were highly resistant. The decimal reduction time (D-10 time) of the spores formed at 45°C by wet heat, 2 M HCl, 2 M NaOH and 2 M H₂O₂ was higher than the respective D-10 time for the spores formed in PBS. The dipicolinic acid (DPA) content and germination efficiency was highest in spores formed at 45°C. Since DPA is related to spore sensitivity towards heat and chemicals, the increased DPA content of spores prepared at 45°C may be responsible for increased resistance to wet heat and other denaturants. The size of spores formed at 45°C was smallest amongst all. The study reveals that temperature, pH and nutrient availability during sporulation affect properties of B. anthracis spores.     

Effect of the osmotic conditions during sporulation on the subsequent resistance of bacterial spores

The causes of Bacillus spore resistance remain unclear. Many structures including a highly compact envelope, low hydration of the protoplast, high concentrations of Ca-chelated dipicolinic acid, and the presence of small acid-soluble spore proteins seem to contribute to resistance. To evaluate the role of internal protoplast composition and hydration, spores of Bacillus subtilis were produced at different osmotic pressures corresponding to water activities of 0.993 (standard), 0.970, and 0.950, using the two depressors (glycerol or NaCl). Sporulation of Bacillus subtilis was slower and reduced in quantity when the water activity was low, taking 4, 10, and 17 days for 0.993, 0.970, and 0.950 water activity, respectively. The spores produced at lower water activity were smaller and could germinate on agar medium at lower water activity than on standard spores. They were also more sensitive to heat (97 degrees C for 5-60 min) than the standard spores but their resistance to high hydrostatic pressure (350 MPa at 40 degrees C for 20 min to 4 h) was not altered. Our results showed that the water activity of the sporulation medium significantly affects spore properties including size, germination capacity, and resistance to heat but has no role in bacterial spore resistance to high hydrostatic pressure.     

Effects of modification of membrane lipid composition on Bacillus subtilis sporulation and spore properties

Aims: To determine effects of inner membrane lipid composition on Bacillus subtilis sporulation and spore properties. Methods and Results: The absence of genes encoding lipid biosynthetic enzymes had no effect on B. subtilis sporulation, although the expected lipids were absent from spores’ inner membrane. The rate of spore germination with nutrients was decreased c. 50% with mutants that lacked the major cardiolipin (CL) synthase and another enzyme for synthesis of a major phospholipid. Spores lacking the minor CL synthase or an enzyme essential for glycolipid synthesis exhibited 50–150% increases in rates of dodecylamine germination, while spores lacking enzymes for phosphatidylethanolamine (PE), phosphatidylserine (PS) and lysylphosphatidylglycerol (l‐PG) synthesis exhibited a 30–50% decrease. Spore sensitivity to H₂O₂ and tert‐butylhydroperoxide was increased 30–60% in the absence of the major CL synthase, but these spores’ sensitivity to NaOCl or Oxone^? was unaffected. Spores of lipid synthesis mutants were less resistant to wet heat, with spores lacking enzymes for PE, PS or l‐PG synthesis exhibiting a two to threefold decrease and spores of other strains exhibiting a four to 10‐fold decrease. The decrease in spore wet heat resistance correlated with an increase in core water content. Conclusions: Changing the lipid composition of the B. subtilis inner membrane did not affect sporulation, although modest effects on spore germination and wet heat and oxidizing agent sensitivity were observed, especially when multiple lipids were absent. The increases in rates of dodecylamine germination were likely due to increased ability of this compound to interact with the spore’s inner membrane in the absence of some CL and glycolipids. The effects on spore wet heat sensitivity are likely indirect, because they were correlated with changes in core water content. Significance and Impact of the Study: The results of this study provide insight into roles of inner membrane lipids in spore properties.     

Role of dipicolinic acid in resistance and stability of spores of Bacillus subtilis with or without DNA-protective alpha/beta-type small acid-soluble proteins

Dipicolinic acid (DPA) comprises approximately 10% of the dry weight of spores of Bacillus species. Although DPA has long been implicated in spore resistance to wet heat and spore stability, definitive evidence on the role of this abundant molecule in spore properties has generally been lacking. Bacillus subtilis strain FB122 (sleB spoVF) produced very stable spores that lacked DPA, and sporulation of this strain with DPA yielded spores with nearly normal DPA levels. DPA-replete and DPA-less FB122 spores had similar levels of the DNA protective alpha/beta-type small acid-soluble spore proteins (SASP), but the DPA-less spores lacked SASP-gamma. The DPA-less FB122 spores exhibited similar UV resistance to the DPA-replete spores but had lower resistance to wet heat, dry heat, hydrogen peroxide, and desiccation. Neither wet heat nor hydrogen peroxide killed the DPA-less spores by DNA damage, but desiccation did. The inability to synthesize both DPA and most alpha/beta-type SASP in strain PS3664 (sspA sspB sleB spoVF) resulted in spores that lost viability during sporulation, at least in part due to DNA damage. DPA-less PS3664 spores were more sensitive to wet heat than either DPA-less FB122 spores or DPA-replete PS3664 spores, and the latter also retained viability during sporulation. These and previous results indicate that, in addition to alpha/beta-type SASP, DPA also is extremely important in spore resistance and stability and, further, that DPA has some specific role(s) in protecting spore DNA from damage. Specific roles for DPA in protecting spore DNA against damage may well have been a major driving force for the spore's accumulation of the high levels of this small molecule.     

Effect of sporulation and recovery medium on the heat resistance and amount of injury of spores from spoilage bacilli

AIMS: To assess the influence of sporulation media on heat resistance, and the use of stress recovery media to measure preservation injury of spores of five representative spoilage bacilli. METHODS AND RESULTS: Bacillus spores prepared on nutrient agar supplemented with Ca2+, Mg2+, Mn2+, Fe2+ and K+ were more heat-resistant than spores obtained from nutrient agar with Mn2+. This increased heat resistance correlated with a decrease in the protoplast water content as determined by buoyant density sedimentation. The degree of preservation injury severity could be assessed on media containing NaCl at moderate pH and organic acids at acid pH. Ca-DPA, K+ or proline were added to the recovery media to demonstrate that heat probably caused injury to both spore germination and the outgrowth system. SIGNIFICANCE AND IMPACT OF THE STUDY: The metal content of sporulation media can strongly effect the validity of preservation resistance studies. The distinctive recovery media developed here can be relevant for assessing and comparing new preservation technologies.     

Maturation of released spores is necessary for acquisition of full spore heat resistance during Bacillus subtilis sporulation

The first ～10% of spores released from sporangia (early spores) during Bacillus subtilis sporulation were isolated, and their properties were compared to those of the total spores produced from the same culture. The early spores had significantly lower resistance to wet heat and hypochlorite than the total spores but identical resistance to dry heat and UV radiation. Early and total spores also had the same levels of core water, dipicolinic acid, and Ca and germinated similarly with several nutrient germinants. The wet heat resistance of the early spores could be increased to that of total spores if early spores were incubated in conditioned sporulation medium for ～24 h at 37°C (maturation), and some hypochlorite resistance was also restored. The maturation of early spores took place in pH 8 buffer with Ca(2+) but was blocked by EDTA; maturation was also seen with early spores of strains lacking the CotE protein or the coat-associated transglutaminase, both of which are needed for normal coat structure. Nonetheless, it appears to be most likely that it is changes in coat structure that are responsible for the increased resistance to wet heat and hypochlorite upon early spore maturation.     

Altered arrangement of proteins in the spore coat of a germination mutant of Bacillus subtilis

Spores produced by a mutant of Bacillus subtilis were slow to develop their resistance properties during sporulation, and were slower to germinate than were wild-type spores. The coat protein composition of the mutant spores, as analysed by SDS-PAGE, was similar to that of the wild-type spores. However, one of the proteins (mol. wt 12000) which is normally present in the outer-most layers of mature wild-type spores and which is surface-exposed, was assembled abnormally into the coat of the mutant spores and not surface-exposed. The mutation responsible for this phenotype (spo-520) has been mapped between pheA and leuB on the B. subtilis chromosome, and was 47% cotransformable with leuB16. This mutation, and three others closely linked to it, define a new sporulation locus, spoVIB, which is involved in spore coat assembly. The phenotype of the mutant(s) supports the contention that spore germination and resistance properties may be determined by the assembly of the coat.     

Effects of Mn levels on resistance of Bacillus megaterium spores to heat, radiation and hydrogen peroxide

Aims: To determine the effects of Mn levels in Bacillus megaterium sporulation and spores on spore resistance. Methods and Results: Bacillus megaterium was sporulated with no added MnCl₂ and up to 1 mmol l^?1 MnCl₂. The resultant spores were purified and loosely bound Mn removed, and spore Mn levels were found to vary c. 100‐fold. The Mn level had no effect on spore γ‐radiation resistance, but B. megaterium spores with elevated Mn levels had higher resistance to UVC radiation (as did Bacillus subtilis spores), wet and dry heat and H₂O₂. However, levels of dipicolinic acid and the DNA‐protective α/β‐type small, acid‐soluble spore proteins were the same in spores with high and low Mn levels. Conclusions: Mn levels either in sporulation or in spores are important factors in determining levels of B. megaterium spore resistance to many agents, with the exception of γ‐radiation. Significance and Impact of the Study: The Mn level in sporulation is an important factor to consider when resistance properties of B. megaterium spores are examined, and will influence the UV resistance of B. subtilis spores, some of which are used as biological dosimeters.     

Inhibition of germination ofBacillus cereus T spores by phenylglyoxal

Phenylgloxal at a concentration of 0.6 mM inhibited germination of Bacillus cereus T spores as characterized by a decrease in absorbance, dipicolinic acid and loss in heat resistance in a chemically defined growth and sporulation medium. In a germination medium containing L-alanine and adenosine, phenylglyoxal inhibited decrease in absorbance and affected partial loss of viability. It is postulated that phenylglyoxal interacts with free amino groups of various enzymes or amino compounds present in the spore structure thereby causing the inhibition of germination.     

Cold shock response in sporulating Bacillus subtilis and its effect on spore heat resistance

Cold shock and ethanol and puromycin stress responses in sporulating Bacillus subtilis cells have been investigated. We show that a total of 13 proteins are strongly induced after a short cold shock treatment of sporulating cells. The cold shock pretreatment affected the heat resistance of the spores formed subsequently, with spores heat killed at 85 or 90 degrees C being more heat resistant than the control spores while they were more heat sensitive than controls that were heat treated at 95 or 100 degrees C. However, B. subtilis spores with mutations in the main cold shock proteins, CspB, -C, and -D, did not display decreased heat resistance compared to controls, indicating that these proteins are not directly responsible for the increased heat resistance of the spores. The disappearance of the stress proteins later in sporulation suggests that they cannot be involved in repairing heat damage during spore germination and outgrowth but must alter spore structure in a way which increases or decreases heat resistance. Since heat, ethanol, and puromycin stress produce similar proteins and similar changes in spore heat resistance while cold shock is different in both respects, these alterations appear to be very specific.