Human dental arch shape evaluated by Euclidean-distance matrix analysis

Form differences between biological structures can be evaluated using several approaches. When landmark data are available, a recently proposed method (euclidean-distance matrix analysis) seems to be able to differentiate between size and shape differences. This method also localizes those areas which differ most between the two structures. We have applied it to analyze the sexual dimorphism in dental arch form in a sample of 50 men and 45 women. Subjects ranged in age between 20 and 27 years, and had sound dentitions. Fourteen landmarks, corresponding to the centers of gravity (centroids) of the occlusal surfaces of all permanent teeth (right second molar to left second molar), were individualized on the dental casts of subjects. All the possible linear distances between pairs of teeth were computed, thus creating four mean form matrices (one for each arch within sex). Gender differences were tested by using euclidean-distance matrix analysis. No significant differences were demonstrated in the shape of arches, while male arches proved to be slightly bigger than female arches. © 1993 Wiley-Liss, Inc.     

Crown diameters of the deciduous teeth in Australian Aboriginals

Mesiodistal and buccolingual crown diameters were measured from dental casts representing the deciduous dentitions of 197 Aboriginal children from the Northern Territory of Australia. Double determination analysis indicated that the semi-automatic recording procedure used was reliable leading to observer errors of no practical significance. Tooth-size was greater in the male subjects but the sexual dimorphism was less marked than in the permanent teeth of the same subjects. The mandibular teeth were more uniform than maxillary with respect to buccolingual size relative to mesiodistal. Extremes of general tooth-size were more marked in the deciduous dentition than in the permanent as a consequence of the relatively large deciduous second molar which in Aboriginals approximates in size the permanent first molar of many other ethnic groups.     

Fluctuating dental asymmetry: A measure of developmental instability in Down syndrome

Subjects with Down syndrome provide a useful model for investigating the effect of chromosomal aneuploidy on developmental pathways. Studies suggest that a major effect of trisomy is a decrease in developmental stability. The present study examines fluctuating dental asymmetry in Down syndrome. Mesiodistal crown diameters were measured from dental casts of 114 Down syndrome subjects. Correlation coefficients for antimeric permanent teeth served as an index of dental asymmetry. These values were compared with normal values obtained from the literature. Fluctuating dental asymmetry is thought to reflect the relative success of developmental homeostasis in countering developmental disturbances. Down syndrome subjects have significantly increased dental asymmetry. In addition, they show a disproportionate increase in dental asymmetry for those teeth reported to have the least developmental stability. These results support the contention that the chromosomal imbalance in Down syndrome results in amplified developmental instability.     

Measurements of tooth wear among Australian Aborigines: I. Serial loss of the enamel crown

The dental casts made from Aboriginal children during the course of a longitudinal growth study in Central Australia provided material for analyzing tooth wear under known environmental conditions. The wear facets produced on the occlusal surfaces were clearly preserved on the dental stone casts and recorded the progress of enamel attrition from ages 6 to 18. These casts were photographed and traced by electronic planimetric methods that automatically recorded the location and size of wear facets on the first and second permanent molars. These areas of worn tooth surface were compared to the total tooth surface. The worn surface was regressed on age to calculate wear rates of each tooth. Discriminant analyses were also performed to determine the significance of dental attrition differences between the sexes at each age group. The total wear on each tooth was highly correlated with age as expected but females wore their teeth at a significantly higher rate than males. The mandibular molars wore more rapidly than maxillary teeth in both sexes. The discriminant analysis successfully grouped 91% of the cases according to age and sex. Pattern of wear, the location, and size of wear facets also differed between age groups and sex. The questions of why there is a difference between male and female wear or why there is greater wear on one arch or arch region have no ready answers. The differing rates and pattern of dental wear do suggest that arch shape and growth rates may be the answer though it has yet to be tested. However, the occlusal surface wear is useful for age estimation in a population and provides a record of shifting masticatory forces during growth.     

Additional features of Ainu dentition. V. Peopling of the pacific

Crown morphology of 85 plaster dental casts from skeletal and living Ainus of less than 1/8 non-Ainu admixture is described and compared for microevolutionary and origins considerations. There is no significant sex dimorphism and few inter-sample differences through time. Inter-observer differences occur where observation standards are poorly established. Ainu teeth exhibit a simplified pattern and have trait frequencies more like those of Polynesians and Micronesians than like Chinese, Japanese or Europeans. There is no dental evidence in support of a Caucasoid origin or close relationship. Similarities outnumber differences between Ainu teeth and those of Micronesians and Polynesians suggestive of a past biological relationship.     

Technical Note: Cervical dimensions for in situ and loose teeth: A critique of the Hillson et al. (2005) method

In 2005, Hillson and colleagues developed a method for obtaining cervicometrics on a collection of loose teeth. However, I identified problems with the method when trying to apply it to material from archaeological collections with a mixture of in situ and loose teeth. The correct placement of the caliper tips at the suggested mesiodistal landmarks proved impossible for many in situ teeth. Their recommendation to rotate teeth to access the suggested landmarks resulted in large errors because not all teeth could be rotated. Other problems were identified with the suggested buccolingual dimensions of molars, which produced measurements that are not homologous across tooth class because of differential reduction in the distal cusps. Am J Phys Anthropol 154:159–164, 2014. © 2014 Wiley Periodicals, Inc.     

A replication technique for scanning electron microscopy: Applications for anthropologists

Scanning electron microscopy has become an increasingly useful tool for anthropologists, particularly because of the development of improved methods of replicating specimens. One of the best replication techniques involves silicone-based dental impression materials to make negative impressions, in conjunction with epoxy resins, which are used to make positives or casts. The technique outlined here is particularly useful for anthropologists. Using this technique allows the examination of bone surfaces, teeth, and fossils for taphonomic, microwear, and experimental studies. Reproduction of detail is faithful at magnifications of × 1,500 to × 2,000, routinely giving resolutions of .1 to .25 μm.     

Australopithecine dental dimensions in a contemporary population

Two unrelated American negro males with extremely large teeth are described. The maximum reported values for Australian aboriginal mesiodistal crown diameter are exceeded in 8 out of 16 tooth groups. The majority of the negro dental measurements either exceed or lie between the mean values given in the literature for Australopithecus and Paranthropus. This casts doubt on the concept that a distinct morphological gap separates fossil from contemporary man.     

Experimental studies in human tooth wear. II

Studies of human tooth wear have been carried on for the past two years using a machine designed to approximate human chewing motions. During this time wear patterns that resemble those frequently found on the teeth of various American Indian skulls have been produced on casts of the definition. Noticeably among these patterns produced are examples of wear on the front end of the dental arches that result in an edge to edge bite. This type of wear was produced by wearing down casts of a modern dentition with a “normal” overbite. The forces applied to the casts mounted on the machine are variable over a wide range and numerous force combinations are possible. By noting these forces and the resulting vectors, the motions necessary to produce different wear patterns can be determined. This has especially aided in understanding the ways in which the oblique molar wear is produced.     

Applications of surface-surface matching algorithms for determination of orthodontic tooth movements

Orthodontic tooth movements are described as the differences between initial and final tooth positions. A computer based method for determination of tooth movements for different treatment methods was developed. A total of 20 casts of the upper jaw of patients treated with tooth positioners or fixed appliances were used as a basis for this study. Tooth movement was analysed on casts before (Ci) and after treatment (Cf). The casts were digitized either with a COMT or 3D laser scanning systems. After digitization, the models were superimposed in the palate by using a surface-surface matching algorithm. Tooth surfaces of the orthodontically moved teeth were segmented and determination of tooth movement was accomplished by matching the moved teeth from Ci to Cf. The resulting transformations delivered three dimensional information on translations and rotations. An accuracy of 0.2 mm in translations and 1 degree in rotations could be demonstrated, showing the different efficiency of treatment schemes.     

Patterns of dental wear and the role of the canine in Cercopithecinae.

The importance of dental wear patterns in understanding masticatory functions in primates has long been appreciated. However, studies of wear patterns among populations of nonhuman primates are few. The purpose of this investigation is to establish the developmental aspects of dental wear in the Cercopithecinae and to describe certain relevant morphological traits. Studies were made of dental casts from 200 primate specimens of Macaca nemestrina, Macaca mulatta, and Papio cynocephalus. These casts were taken at four-month intervals, beginning at two years of age and continuing over a period of six to seven years. The wear pattern starts with the rounding and eventual flattening of the protoconid and protocone of the erupted first molars. Once this stage is reached, the hypoconid and metaconid of the mandibular, and the hypocone and paracone of the maxillary molars are rounded and eventually flattened. This pattern is maintained until the cusp tips are removed and the dentin exposed, however, the entoconid and metacone are not subjected to significant wear at this stage. Analysis of these dental casts and museum specimens has provided data on the development of dental wear during the maturation of these primates. The distribution of forces acting upon the teeth produce diagnostic patterns of wear, which provide evidence of the force location and magnitude. In examining the data, the hypothesis of canine guidance and its limitation of mandibular motion was evaluated. Specimens whose canines were removed demonstrate that the canines play no significant role in the development or maintenance of dental wear planes.     

Relationships between age and dental attrition in Australian aboriginals

Tooth wear scores (ratios of exposed dentin to total crown area) were calculated from dental casts of Australian Aboriginal subjects of known age from three populations. Linear regression equations relating attrition scores to age were derived. The slope of the regression line reflects the rate of tooth wear, and the intercept is related to the timing of first exposure of dentin. Differences in morphology between anterior and posterior teeth are reflected in a linear relationship between attrition scores and age for anterior teeth but a logarithmic relationship for posterior teeth. Correlations between age and attrition range from less than 0.40 for third molars (where differences in the eruption and occlusion of the teeth resulted in different patterns of wear) to greater than 0.80 for the premolars and first molars. Because of the generally high correlations between age and attrition, it is possible to estimate age from the extent of tooth wear with confidence limits of the order of +/- 10 years.     

Dental and general health in a population of wild ring-tailed lemurs: a life history approach

Data are presented on dental and general health for seven groups of wild ring-tailed lemurs, Lemur catta, from the Beza Mahafaly Reserve, in southern Madagascar. As part of a study of population demography, adults were captured, collared, and tagged, and biometric measurements, dental casts, and analyses of dental and general health were made. Results indicate that patterns of dental health vary by individual, age, sex, and habitat. Prime adults show more dental attrition than young adults. Prime males living in more marginal habitats show greater mean attrition than those living in richer habitats. Dental damage, specifically to the toothcomb, indicates that mechanical stresses to this region may include the initial harvesting of foods, in addition to grooming. Males exhibit more evidence of past trauma, including scars and chipped teeth. These results indicate that environmental as well as social factors, such as female dominance, may lead to sex differences in health patterns among lemurs.     

«Relative growth» from the dentino-enamel junction in primate maxillary molars

The dentino-enamel junction is critical throughout growth to mature crown configurations, being the interface between the papilla and the dental cap. Enamel deposition occurs relatively late and often causes changes from the pattern residing in the dentino-enamel junction. Primate teeth (mostly M¹) have been stripped of enamel after measurement and mapping of the original crown. Relative growth, a variant of static adult (allomorphic) allometries, is assessed by displacement of enamel basal crown component landmarks from dentine homologues relative to tooth size. The hypothesis that differential enamel growth reflects evolutionary history is supported by the positive allometry and shape differences in enamel versus dentine landmarks among phyletically enlarged and dentally-reduced primates.     

Dentition of moustached tamarins (Saguinus mystax mystax) from Padre Isla, Peru, part 1: quantitative variation

Analyses of dental variation in geographically restricted, wild populations of primates are extremely rare; however, such data form the best source for models of likely degrees of variation within and between fossil species. Data from dental casts of a geographically restricted population of moustached tamarins (Saguinus mystax mystax) from Padre Isla, Peru, document high levels of dental variability, as measured by coefficients of variation, in a nonsexually dimorphic species, despite its isolation and small population size. Like other primates, moustached tamarins show lower variability in the dimensions of the first molars and increased variability in the dimensions of the final molars in the toothrow. Moustached tamarins from Padre Isla have a distinctive pattern of variability in the remaining teeth, including more stable tooth lengths in the anterior and posterior portions of the toothrow, and more stable tooth widths in the midregion of the toothrow. High variability in incisor width may be due to age effects of a distinctive diet and pattern of dental wear.     

The use of metallic implants in the study of facial growth in children: method and application

On the basis of experience gained over a number of years, an account is given of the technique for insertion of the implants, the radiographic method, and the graphic procedure for preparation of growth tracings. Small pins of hard tantalum are hammered into the bone under local analgesia with a pencil-shaped instrument, in the tip of which the implant is placed. No surgical exposure is necessary. Because of remodeling resorption of the bone and eruption of the teeth, the implants can be placed only in certain places in the maxilla and mandible. In implant studies it is necessary to observe a high level of reproducibility in positioning the head in the cephalostat. An X -ray cephalostat with a built-in image intensifier has been designed which enables the position to be monitored by televison. In the graphic procedure, drawings of the arches from dental casts are incorporated in tracings of profile radiographs; the paths of eruption of the teeth and development or the arches can then be examined with the metallic implants as references.     

西藏小型猪部分脏器血管铸型标本制作

目的研究西藏小型猪内脏铸型,对西藏小型猪在相关生物医学研究上的应用提供参考。方法应用过氯乙烯和牙托粉单独或混合填充剂灌注方法制作西藏小型猪心脏、肝脏、脾脏、肺脏、肾脏和脑铸型研究其血管分布规律。结果西藏小型猪内脏铸型外观完整美观,保持正常解剖状态、位置,充分显示和暴露主干的分支分布,各管道饱满,管道粗细适当,标本色泽鲜艳。结论通过单独或混合灌注过氯乙烯和牙托粉填充剂可以成功制作西藏小型猪铸型标本,所做标本显示的脏器血管分布情况对相关生物医学研究具有重要应用价值。     

Technical note: Occlusal fingerprint analysis: Quantification of tooth wear pattern

Information about food ingestion and mastication behavior during the lifespan of an individual is encoded in the dental occlusal wear pattern. To decode this information, we describe a new method called occlusal fingerprint analysis (OFA). Structural parameters of wear facets on the occlusal surface of teeth are quantified from digitized casts for the interpretation of occlusal aspects. The OFA provides an individual three‐dimensional dental occlusal compass that indicates the major pathways of interaction between antagonists, revealing information about development, spatial position, and enlargement of wear facets. Humans develop a very similar overall pattern of crown contacts, although specific characteristics of wear facets reflect an individual's occlusal relationships and masticatory behavior. We hypothesize that the wear pattern is a unique character and therefore valuable for individual identification. Furthermore we suggest that OFA, when further developed, may be useful for identification of behavioral, biological, and chemical factors affecting crown morphology. Am J Phys Anthropol, 2009. © 2009 Wiley‐Liss, Inc.     

Accuracy and Reliability of a Novel Method for Fusion of Digital Dental Casts and Cone Beam Computed Tomography Scans

Several methods have been proposed to integrate digital models into Cone Beam Computed Tomography scans. Since all these methods have some drawbacks such as radiation exposure, soft tissue deformation and time-consuming digital handling processes, we propose a new method to integrate digital dental casts into Cone Beam Computed Tomography scans. Plaster casts of 10 patients were randomly selected and 5 titanium markers were glued to the upper and lower plaster cast. The plaster models were scanned, impressions were taken from the plaster models and the impressions were also scanned. Linear measurements were performed on all three models, to assess accuracy and reproducibility. Besides that, matching of the scanned plaster models and scanned impressions was done, to assess the accuracy of the matching procedure. Results show that all measurement errors are smaller than 0.2 mm, and that 81% is smaller than 0.1 mm. Matching of the scanned plaster casts and scanned impressions show a mean error between the two surfaces of the upper arch of 0.14 mm and for the lower arch of 0.18 mm. The time needed for reconstructing the CBCT scans to a digital patient, where the impressions are integrated into the CBCT scan of the patient takes about 15 minutes, with little variance between patients. In conclusion, we can state that this new method is a reliable method to integrate digital dental casts into CBCT scans. As far as radiation exposure, soft tissue deformation and digital handling processes are concerned, it is a significant improvement compared to the previously published methods.     

Morphological features of Jat dentition

Observations on morphological characters of milk and permanent teeth, based on 648 pairs of dental casts of 356 male and 292 female Jat children of Haryana (India) are reported. Deciduous teeth show high frequencies of bilateral winging of maxillary central incisor, Carabelli's cusp of maxillary second molar, and deflecting wrinkle of mandibular second molar. Reduction of maxillary molar cusps is more marked in males than in females. Y pattern is very common in deciduous molars. Permanent teeth have high frequencies of grooved cingulum of incisors, cingular nodule of lateral incisors and canines, and distal accessary ridge of canines. Low frequencies of Carabelli's cusp and winging are also common. The tendency towards faintly developed shovelling in milk incisors occurs more often than in the permanent teeth.