Age determination of the African buffalo, Syncerus caffer Sparrman

Age criteria for the African buffalo are described. These are based on the tooth eruption sequence and on wear of the first molar. Assignment of absolute ages to the tooth eruption and wear classes has been made by reference to known-age animals and to numbers of cementum lines in tooth sections. For ageing animals to the nearest year, the normal degree of accuracy of the methods is assumed to be about ± 1/2year (1–5 years of age); about ± 1 year (5–15 years of age); and about ±2 years (15-20years of age). A field method of age determination is presented based on horn characteristics and relative body size.     

Cheek tooth erosion in male babirusa (genus Babyrousa)

The wear on the occlusal surfaces of male babirusa cheek teeth was evaluated in 53 skulls of Babyrousa babyrussa from Buru and the Sula Islands and 87 skulls of B. celebensis from Sulawesi, Indonesia. Based on the comparative lengths of their continually growing maxillary canine teeth, the skulls were divided into five ‘age categories’ (A–E). Numerical and symbolic codes representing tooth wear were applied to each pillar (cusp region) of the mandibular and maxillary permanent third and fourth premolar teeth, and the first, second and third permanent molar teeth. There was no significant difference between the tooth wear patters of skulls in groups A and B, or in groups C and D, and so these were amalgamated. There was close correspondence in wear patterns between each side of the mouth in both species and in each age group. The wear patterns of the mandibular and maxillary teeth, although not identical, were very similar, as were the wear patterns of both species. In group A + B for both species tooth wear was relatively slight, with the M1 teeth experiencing most relative wear. There was almost no wear of the M3 teeth. In group C + D substantial wear of upper and lower M1 was evident. In group E more widespread wear of the cheek teeth was seen, with increased severity of M1 tooth wear, yet there was comparatively much less M2 and M3 tooth wear. The pattern of cheek tooth wear of the Babyrousa spp. was different from that shown by Sus scrofa. Differences in diet selection and processing were highlighted as potential contributing factors. The pattern of cheek tooth wear in male babirusa was not adequate for use to monitor their age.     

Age estimation of the White rhinoceros (Ceratotherium simum)

Age estimation criteria for the southern White rhinoceros ( Ceratotherium simum simum ) are presented both for free-ranging live animals and for cranial material. These are based on: (i) size appearance and horn development of live animals; (ii) stages of tooth eruption; (iii) tooth wear classes; (iv) attrition in height of the first molar tooth; (v) counts of cementum lines visible in tooth sections. Selected measurements are presented for live animals, skulls and horns.
For live animals, eight size classes are distinguished, seven of these covering immature animals up to ten years of age. Sixteen tooth wear classes are established, based on eruption and surface wear of maxillary dentition. Chronological ages were assigned from individually known animals followed in the field, and from skulls from animals for which exact records of age were available, or which could be assigned to an age category from appearance at death. Cementum line counts corresponded approximately with age in years, despite difficulties in interpreting lines. Some variability was observed, possibly related to nutritional conditions.
The maximum cementum line count obtained indicates a longevity of at least 40 years. Full body weight and socio-sexual maturity are attained by males between 10 and 15 years of age, while females first give birth between six and eight years of age. Sequences and times of tooth eruption are similar to those reported for the Black rhinoceros ( Diceros bicornis ).
Comparative cranial and body measurements are presented for the northern subspecies ( Ceratotherium simum cottoni ).     

The relation of canine size to pattern and extent of attrition in baboons

For most genera of animals the association between dental morphology and diet is such that inferences concerning the diet can be made on the basis of the dentition alone. The canine is the one tooth that appears exempt from such generalisation and exhibits a wide range of variability of size and shape in all groups. In order to determine the effect of dimorphism of the canine on the dental apparatus, male and female specimens of Theropithecus and Papio baboons were examined. Occlusal relationships and dental pathology for 21 Theropithecus and 40 Papio skulls were recorded, and crown height measurements obtained for maxillary incisors, buccal and lingual molar cusps. Attrition was the most common and severe cause of abscess formation in older animals: the pattern of attrition differed in adult males and females, the latter showing more wear of the incisor and lingual molar cusps. Partial correlations for incisor, buccal and lingual molar cuspal crown height show a significant correlation between incisor and lingual cusp attrition in juveniles of both sexes and adult females (p < 0.01). Adult males show no correlation of attrition. It is proposed that the correlation of incisor and lingual molar cusp attrition is associated with anterior-posterior grinding movements, such as take place during incision, that the large canine present in the male limits such movements, the sharp blade-like canine being employed as a cutting tool. This use of the canine by reducing functional demands on other teeth, prolongs the utility of the dental apparatus, and hence the lifespan of its possessor.     

Tooth wear and compensatory modification of the anterior dentoalveolar complex in humans

In populations living in environments where teeth wear severely, some compensatory modification of the dentoalveolar complex is thought to occur during life whereby functional occlusion is maintained as tooth substance is lost by wear. This study investigates one aspect of this modification process: Changes in the anterior dentoalveolar complex that are accompanied with wear were examined in a series of Japanese skeletal samples. In the prehistoric Japanese hunter-gatherer population heavy wear occurs over the entire dentition. The following changes were demonstrated to have occurred in the anterior segment of the dentition accompanied by wear on the anterior teeth: The anterior teeth tip lingually with wear up to a nearly upright position to fill in interproximal spaces that would have been generated by wear, and to maintain contact relations between adjacent teeth. At the same time, the anterior surface of the maxillary alveolar process also inclines lingually to a certain extent. The amount of lingual tipping is greater in the maxillary anterior teeth than in their mandibular antagonists. It is because of this discrepancy that, with age, the horizontal component of the overlap between maxillary and mandibular anterior teeth decreases, and their bite form changes from scissor bite to edge-to-edge bite. Lesser degrees of lingual tipping of the anterior teeth were also detected in the prehistoric agriculturists and historic Japanese populations. The variation in the degree of lingual tipping observed among the samples is explained by inter-population variation in severity and pattern of tooth wear. This and other evidence suggests that mechanisms that compensate for wear in the anterior dentition may be characteristic of all living human populations, independently of the degree of wear severity endured in their environments.     

Age and individual foraging behavior predict tooth wear in Amboseli baboons

Teeth represent an essential component of the foraging apparatus for any mammal, and tooth wear can have significant implications for survival and reproduction. This study focuses on tooth wear in wild baboons in Amboseli, southern Kenya. We obtained mandibular and maxillary tooth impressions from 95 baboons and analyzed digital images of replicas made from these impressions. We measured tooth wear as the percent dentine exposure (PDE, the percent of the occlusal surface on which dentine was exposed), and we examined the relationship of PDE to age, behavior, and life history variables. We found that PDE increased significantly with age for both sexes in all three molar types. In females, we also tested the hypotheses that long‐term patterns of feeding behavior, social dominance rank, and one measure of maternal investment (the cumulative number of months that a female had dependent infants during her lifetime) would predict tooth wear when we controlled for age. The hypothesis that feeding behavior predicted tooth wear was supported. The percent of feeding time spent consuming grass corms predicted PDE when controlling for age. However, PDE was not associated with social dominance rank or maternal investment. Am J Phys Anthropol, 2010. © 2010 Wiley‐Liss, Inc.     

Mineralization and wear of mandibular first molars in red deer (Cervus elaphus) of known age

The degree of dental wear was measured in 41 mandibular first molars from red deer of known age (range 2–18 years). The calculated wear indices were positively correlated with age ( r = 0.780, P < 0.001). In the same sample, significant ( P < 0.001) differences in hardness (determined by microhardness testing) were observed between enamel and coronal dentine as well as between outer and inner enamel and dentine, respectively. In animals belonging to the same age group (three-year-olds, n = 11), a negative correlation ( r = -0.830, P = 0.0016) was found between wear index and maximum mean enamel hardness. In a sample of five specimens from this age group, a negative correlation ( r = -0.918, P = 0.028) between maximum calcium concentration of enamel (measured by electron microprobing) and wear index was also recorded. We concluded that the intensity of enamel mineralization had a decisive effect on the degree of dental wear. Measuring of enamel hardness and subsequent modification of wear scores or indices is therefore recommended for future studies on the relationship between age and the degree of dental attrition in deer.     

Brief communication: Identification reassessment of the isolated tooth Krapina D58 through occlusal fingerprint analysis

High variability in the dentition of Homo can create uncertainties in the correct identification of isolated teeth. For instance, standard tooth identification criteria cannot determine with absolute certainty if an isolated tooth is a second or third maxillary molar. In this contribution, using occlusal fingerprint analysis, we reassess the identification of Krapina D58 (Homo neanderthalensis), which is catalogued as a third maxillary molar. We have hypothesized that the presence/absence of the distal occlusal wear facets can be used to differentiate second from third maxillary molars. The results obtained confirm our hypothesis, showing a significant difference between second and third maxillary molars. In particular we note the complete absence of Facets 7 and 10 in all third molars included in this analysis. The presence of these facets in Krapina D58 eliminates the possibility that it is a third maxillary molar. Consequently it should be reclassified as a second molar. Although this method is limited by the degree of dental wear (i.e., unworn teeth cannot be analyzed) and to individual molars in full occlusion, it can be used for tooth identification when other common criteria are not sufficient to discriminate between second and third maxillary molars. Am J Phys Anthropol 143:306–312, 2010. © 2010 Wiley‐Liss, Inc.     

The role of occlusal stress and gingival infection in the formation of exostoses on mandible and maxilla from Neolithic China

Exostoses on the mandible and maxilla is a frequently observed bone growth of controversial aetiology. The aim of this study is to analyse environmental factors that may stimulate the formation of exostoses on different regions of the maxilla and mandible. Sixty-six well-preserved crania from Neolithic China were studied for the presence of buccal exostoses on the maxilla (BE) and lingual exostoses on the mandible (LME). Other oral health indicators, such as occlusal wear on molars, pathology of temporomandibular joint (TMJ), carious lesions, calculus accretion, periodontal disease, and antemortem tooth loss were recorded. Buccal maxillary exostosis was unusually common on the Neolithic skulls from China, which thus resemble the Sinantropus crania described by Weidenreich (1943). We report a significant Spearman correlation between BE and LME (rho = 0.54, P < 0.00001), suggesting a partially shared aetiology of these two types of exostoses. The highest correlations between either form of exostoses and any oral indicator of stress were found for pathology at TMJ (rho = 0.46, P < 0.0001 for both types of exostoses). Smaller but significant correlations were observed between LME and the age adjusted wear rate on lower molars, as well as between BE and indicators of oral/dental pathology, e.g. caries, calculus, periodontoses, and antemortem tooth loss. Both types of exostoses tended to increase in frequency with age, although a significant trend was observed only for BE. We conclude that formation of exostoses is a complex process that can be invoked by any agent causing damage and inflammation of gingival tissue. However, severe occlusal stress, which is often manifested in TMJ disorder, is the main environmental factor leading to exostosis development in genetically pre-disposed individuals.     

Interproximal wear facets and tooth associations in the Paşalar hominoid sample

Interproximal wear facets were examined on hominoid teeth from the middle Miocene site at Pa?alar, Turkey. The aim was to find matches between adjacent premolar and molar teeth from single individuals that were collected in the field as isolated teeth and use them to reconstruct tooth rows. These were then used to investigate: (1) the wear gradient on the molar teeth; (2) the dispersal of teeth from single mandibles and maxillae; (3) the size ratios among the molars; and (4) the number of individuals represented by the hominoid sample. Facets were scored for size and shape and were assessed visually using photographs and superimposed outline drawings on acetate transparencies. Out of a sample of approximately 1,500 teeth collected between 1983 and 1996, 532 molars and 258 premolars produced apparent matches making up 160 tooth rows. These were then examined rigorously for morphological consistency and state of wear, and, employing the criterion that only the most unequivocal associations should be used, the final number was reduced to 48 tooth rows-31 mandibular and 17 maxillary. The tooth associations represent a minimum of 21 individuals and probably as many as 34. Molar wear was rapid, with M1s having almost twice as much wear as M3s, as measured by a wear-gradient index. The M2s are intermediate but generally closer to M1s in degree of wear, as are P4s. This wear pattern suggests either delayed eruption of M3s or extremely abrasive diets causing rapid, heavy wear. There is some indication that the wear patterns in Griphopithecus alpani and Kenyapithecus kizili are different, with the latter perhaps having a lower wear gradient, but the K. kizili sample is very small. In both species, the M2 is the largest molar and the M1 is the smallest. Separation of individual teeth in the 48 tooth associations varied from widely separated-up to 8.5m apart-to within a few centimeters of each other. One tooth row (D922) was found with the teeth in contact but the maxillary bone had dissolved away. Two dispersal mechanisms have been identified from earlier taphonomic work: transport of disarticulated elements to the fossil site and reworking of sediments by spring action.     

Canine role in dental wear patterns: Macaca nemestrina

A study of variables and patterns in dental wear among 30 individuals in a colony of Macaca nemestrina shows that consideration of age and sex are crucial for understanding differential wear degrees on molar occlusal planes. With advanced age, this species of non-human primate undergoes obliteration of initial morphological characteristics through the gradual erosion of enamel. Wear gradients are differential from PM1-M3 in both sexes. It appears that there is a functional relationship between degrees of occlusal plane wear and the degree of wear on the canines, and that females show a greater degree of wear changes relative to males of equivalent age because of initial differences in canine length and robusticity due to sexual dimorphism. It appears that there is a direct relationship between occlusal wear plane changes and the degree of wear on the canines, with advanced differential wear showing up in individuals in whom years of maxillary canine honing, canine damage, and the normal wear of mastication has reduced dimensions of unworn permanent canines. Other considerations included in this study are the honing functions of the deciduous first mandibular molars and molar cusp height relative to canine function.     

Age-related variability in occlusal wear planes

Investigation of two populations of 136 individuals shows several patterns of occlusal wear plane change which are positively correlated with age. For individuals up to the age of 18, there is a characteristic pattern in which the occlusal wear planes of the mandibular teeth are lingually sloped and those of the maxillary dentition buccally sloped, with the exception of the maxillary premolars, which are also lingually sloped. The long axes of the mandibular teeth give them a lingual orientation relative to the maxillary teeth, and the long axes of the maxillary molars, by contrast, are buccally oriented. In the 18-30 age range for all sexes, the mandibular M1 becomes buccally sloped on its occlusal surface while the occlusal wear plane on the maxillary M1 becomes lingually sloped. Later age changes indicate a trend for the mandibular premolars to become buccally sloped, while the wear planes of the maxillary premolars remain lingually sloped. There is a corresponding tendency for the maxillary and mandibular second molars to undergo changes in the initial orientation of the occlusal wear planes.     

The relationship between tooth wear, habitat quality and late-life reproduction in a wild red deer population

1. Molar tooth wear is considered an important proximate mechanism driving patterns of senescence in ungulates but few studies have investigated the causes of variation in molar wear or their consequences for reproductive success. 2. In this study, we assessed molar tooth wear at death among red deer Cervus elaphus of known age on the Isle of Rum, Scotland. 3. First molar height showed a decelerating decline with age. In females, the rates of molar wear with age varied with location of home range and individuals experiencing low resource competition showed reduced molar wear. We suggest that this spatial variation in molar wear is related to differences in the availability of high-quality grazing habitat and levels of resource competition. 4. There was no evidence that females with more heavily worn molars had reduced reproductive performance late in life or that first molar height was associated with reproductive senescence.     

A correlation of tooth wear and age among modern Igloolik eskimos.

The level of molar wear can be estimated reliably by measuring the cusp height. A correlation between age and the level of molar wear, expressed by a normalizing index (TWI) of cusp height, was found to exist in a sample of modern Igloolik Northwest Territories Eskimos. Not only was it possible to derive linear regression models to test the degree of correlation in the sample of 46 female and 39 male maxillary casts of Igloolik Eskimos, but the models were capable of accurately predicting the age of natives of the neighboring Hall Beach community. Sexual dimorphism in molar wear, perhaps attributable to differential bruxism, was demonstrated for the Igloolik sample. Based on the combined estimate of slopes for each maxillary molar pair for females and males, it was discovered that the male maxillary molars are worn approximately 30% more rapidly than female maxillary molars.     

Bigger teeth for longer life? Longevity and molar height in two roe deer populations

The role of tooth wear as a proximate cause of senescence in ruminants has recently been highlighted. There are two competing hypotheses to explain variation in tooth height and wear; the diet-quality hypothesis predicting increased wear in low-quality habitats, and the life-history hypothesis predicting molar height to be related to expected longevity. We compared tooth height and wear from roe deer of known age from two contrasting populations of roe deer (Capreolus capreolus) in France: Trois Fontaines (TF) with good habitat and shorter animal life expectancy and Chizé (CH) with poor habitat and longer animal life expectancy. There was no population difference in tooth wear, leading to rejection of the diet-quality hypothesis. However, despite their smaller body size, initial molar height for animals from CH was larger than for animals from TF. This provides the first evidence that variation in longevity between populations can lead to differences in molar height within a species.     

Age inTayassu pecari according to dental eruption

The determination of the age composition of a population is considered to be a fundamental parameter for the analysis of life-history strategy of the species. In the Tayassuidae, the determination of relative age has been primarily based on molar tooth wear, sometimes combined with other external characteristics, such as hair color or body size. The present study examined the dental composition of white-lipped peccariesTayassu pecari (Link, 1795) . Through the determination of the erupted dental pattern and its relation to the body weight of the animal, six age classes were established. The presence of molar teeth was considered the most accurate parameter for establishing age classes for white-lipped peccaries.     

Relationship of Tooth Wear to Chronological Age among Indigenous Amazon Populations

In indigenous populations, age can be estimated based on family structure and physical examination. However, the accuracy of such methods is questionable. The aim of this cross-sectional study was to evaluate occlusal tooth wear related to estimated age in the remote indigenous populations of the Xingu River, Amazon. Two hundred and twenty three semi-isolated indigenous subjects with permanent dentition from the Arara (n = 117), Xicrin-Kayapó (n = 60) and Assurini (n = 46) villages were examined. The control group consisted of 40 non-indigenous individuals living in an urban area in the Amazon basin (Belem). A modified tooth wear index was applied and then associated with chronological age by linear regression analysis. A strong association was found between tooth wear and chronological age in the indigenous populations (p <0.001). Tooth wear measurements were able to explain 86% of the variation in the ages of the Arara sample, 70% of the Xicrin-Kaiapó sample and 65% of the Assurini sample. In the urban control sample, only 12% of ages could be determined by tooth wear. These findings suggest that tooth wear is a poor estimator of chronological age in the urban population; however, it has a strong association with age for the more remote indigenous populations. Consequently, these findings suggest that a simple tooth wear evaluation method, as described and applied in this study, can be used to provide a straightforward and efficient means to assist in age determination of newly contacted indigenous groups.     

Variation in occlusal dental wear of two Chalcolithic populations in the southern Levant

Occlusal wear rate and wear plane in two Chalcolithic ( approximately 6500-5500 BP) samples from the southern Levant were compared, using paired first and second mandibular molars. Though food staples in both societies were derived from agro-pastoralism, they were located in distinct environmental regions: Wadi (W.) Makkukh in the Judean desert, and Peqi'in in the Upper Galilee. Accordingly, it was predicted that variation in wear should occur due to their location in distinct environments. Jaw size and tooth size were measured to estimate the possible impact of these variables on wear scores. Molar occlusal surfaces were divided into four quadrants, and wear scores were recorded for each quadrant. Principal axis analysis was then performed between total wear scores of paired, adjacent first and second molars to assess wear rates. Principal axis analysis was also used to analyze the change in occlusal wear plane in each sample by comparing between-buccal-cusps wear scores of the first molar with lingual wear scores of the second molar. The results indicate that the occlusal wear plane was similar in both samples but that wear tended to be more rapid in W. Makkukh. Since both samples were similar in jaw/tooth size, it is argued that the results reflect less refined food-processing methods as well as the unintentional ingestion of sand by individuals interred in the Judean desert.     

The influence of age on tooth root colour changes

The purpose of this study was to examine the relationship between tooth root colour and age, and its possible application in age assessment. In this research altogether 100 tooth roots have been analysed. All teeth, that is their roots, were digitally recorded and the colorimetric treatment was made using Adobe Photoshop 7.0 computer program. Studies have shown no significant difference between RGB values analysed on the whole root surface or only on its central part, with certainty p >0.99. It is also established that there is no statistically significant difference in colouration on four anatomical surfaces (buccal, mesial, lingual, distal) of tooth roots with certaintyp>0.99 for red, p>0.99 for green and p>0.50 for blue colouration component. Statistical data interpretation showed that there is a linear correlation between obtained RGB values and age, with r=-0.994, p>0.99 for red component, r=-0.972, p>0.99 for green and r=-0.982, p>0.95 for blue colouration component. From the obtained results it is possible to conclude that analysing the above mentioned parameter we can easily establish dental age and this technique can be the basis of practical application in establishing chronological age of man.