蛋白质微阵列生产用琼脂糖修饰玻片制备的条件优化

目的:建立一种以琼脂糖修饰的玻片为载体的蛋白质微阵列制备的优化方法,比较琼脂糖修饰玻片和醛基修饰玻片及氨基修饰玻片对蛋白质固定效率的优劣。方法:将羊IgG固定在载体表面,经过洗涤、封闭,再加入Cy3标记的兔抗羊IgG,孵育,洗涤后用共聚焦激光扫描仪获取图像,检测各点的荧光强度,根据荧光强度确定最佳琼脂糖浓度,最佳NaIO4浓度,最佳固定时间以及封闭时间等实验条件。结果:琼脂糖浓度为1.2％、NaIO4浓度为20mmol／L、固定时间为1h、孵育时间为45min时,蛋白质在载体上的固定效率和反应活性最高。在固定的抗体浓度相同的情况下,琼脂糖修饰玻片荧光强度是醛基修饰玻片的2.6倍,是氨基修饰玻片的9倍。结论:确立了蛋白质微阵列生产用琼脂糖修饰玻片制备的优化条件,用该优化条件制备的琼脂糖玻片更适合用于蛋白质微阵列载体。     

自身抗体检测蛋白芯片制备条件的优化及初步应用

选择临床上常用的用于自身免疫性疾病抗体检测所对应的12种抗原, 运用NBT/BCIP显色反应策略, 研制一种可同时检测12种常用自身抗体的蛋白芯片检测系统。应用NBT/BCIP终点检测体系对每一种抗原的点样液、点样浓度、血清稀释度进行优化, 制备出可同时检测12种自身抗体的蛋白芯片, 并通过对678例病人血清和120例非病人血清的检测进行敏感度和特异度评价。优化的点样液为0.1%TBST, 血清稀释度为1:4, 12种抗原的最佳点样浓度分别为: ANA 520 mg/mL, Ro-60/SSa 465 mg/mL, La/SSb 530 mg/mL, Jo-1 530 mg/mL, Scl-70 525 mg/mL, Sm 520 mg/mL, Ro-52/SSa 615 mg/mL, RF 340 mg/mL, CCP 465 mg/mL, u1RNP 410 mg/mL, CENP-B 490 mg/mL, dsDNA 580 mg/mL; 通过对678份阳性血清和120份阴性血清的检测, 该蛋白芯片技术对12种自身抗体检测的敏感度在80%~96.3%之间, 特异度在86.7%~100%之间, 与传统的检测技术有较高的符合率。我们研究的自身抗体检测蛋白芯片技术体系具有快速、方便、高通量、廉价等优势, 易于商业化, 适合不同条件的临床需要。     

基因芯片接触式点样条件的优化

样品的点制是基因芯片制备中的关键一步,影响因素众多,如点样液和液面高度、基片的选择、控制湿度、点样针运行速度、与基片接触时间等。对玻片点制各条件进行了摸索和优化,并对膜芯片的点制参数进行筛选,以期得到规整和重现性好的样品点。     

叉孢苏铁ISSR反应条件的优化及初步应用

利用ISSR 技术对叉孢苏铁(Cycas segmentifida)遗传多样性进行研究,对影响PCR 反应的DNA 模板浓度、dNTP 浓度、Taq 酶含量、引物浓度、Mg2 浓度和退火温度等进行了条件优化。叉孢苏铁的ISSR 最佳反应扩增体系为20μl 反应体积2μl 10 ×PCR buffer,模板DNA20ng,1UTaq 酶,1.5～2.75mmol/L MgCl2,0.1mmol/L 4 ×dNTP,0.22μmol/L 引物,2%甲酰胺。适宜的退火温度为50～52℃。从103 条引物中筛选出12 条用于所有样品的扩增,共扩增出122 条带,其中多态性条带为86 条,占总条带数的70.49%。POPGENE分析结果表明,种级水平上,叉孢苏铁具有中等稍高的遗传多样性水平,且各居群间有着很高的遗传分化度。     

结直肠癌血清肿瘤标记物液相芯片制备条件的优化及在CEA抗原检测中的初步应用

液相芯片技术由于其高通量,灵敏度高,信噪比高,液相条件下反应,操作简便,耗时短等优点,已被美国FDA批准成为临床的检测手段。本文主要介绍了结直肠癌血清肿瘤标记物液相芯片制备条件的优化及其在CEA抗原检测中的初步应用。本研究首先将CEA抗原的捕获抗体与微球载体进行偶联,制备液相芯片,然后对影响反应的微球与抗原的反应时间,生物素化检测抗体的浓度及avidin-PE荧光染料的反应浓度等因素进行正交设计,确定出最优的反应条件;用该液相芯片反应体系检测55例临床样本,与ELISA试剂盒检测结果相比：在同样的样本浓度范围内,两者的检测结果基本一致,但液相芯片检测的浓度范围更大而且液相芯片可将多种肿瘤标记物在一个反应进行检测,节省检测的时间和人力。     

产铁载体菌株的分离、培养条件优化及初步应用

[背景]微生物菌肥是推动绿色农业发展的关键.铁载体是由植物根际微生物产生的一类低分子量金属离子螯合物,可通过螯合Fe3+促进植物生长,因此,筛选具有高产铁载体功能的菌种意义重大.[目的]从植株根际土壤中分离高产铁载体微生物,为开发植物根际促生菌提供种质资源.[方法]采用chrome azurol sulfonate(C...     

衍生化条件的优化及不同产地青蒿中青蒿素含量的柱前衍生化-HPLC法测定

Derivation conditions of pre-column derivation-HPLC method used for determinating artemisinin content were compared and selected,and artemisinin content in above-ground part of Artemisia annua L.from seventeen locations was compared by optimal pre-column derivation-HPLC method.The optimal derivation condition is selected via comparing of 0.2% NaOH solution addition(3,4,5,6 and 7 mL),derivation temperature(30 ℃,35 ℃,40 ℃,45 ℃ and 50 ℃) and derivation time(0,2,5,10,20,40 and 60 min) during derivation process.The optimal derivation condition is adding 5 mL 0.2% NaOH solution,then insulating in 40 ℃ water bath for 10 min.Differences of artemisinin content in A.annua from seventeen locations are obvious,the general trend is that artemisinin content decreases gradually with location from south to north,in which artemisinin content in A.annua from Youyang of Chongqing is the highest with a value of 7.08 mg·g-1.The method is simple and accurate with good reproducibility,and can be used to determinate artemisinin content in medicinal material of A.annua.     

全细胞催化生产苯乙酰-7-氨基-3-脱乙酰氧基头孢烷酸的条件优化

头孢类抗生素由于广谱性和低毒性被广泛用于细菌感染的治疗。7-氨基-3-脱乙酰氧基头孢烷酸(7-aminodeacetoxycephalosporanic acid,7-ADCA)作为半合成头孢类抗生素的重要中间体,需求量逐渐增加,而7-ADCA主要由G-7-ADCA(苯乙酰-7ADCA)脱酰基得到。工业上多以化学法合成G-7-ADCA,成本高,污染严重。迫切需要对环境友好且经济高效的合成方法。在前期研究中,构建了一株可以将青霉素G转化为G-7-ADCA的代谢工程菌(E.coli H7/PG15)。本研究通过单因素试验对E.coli H7/PG15的G-7-ADCA合成过程进行优化,包括底物组成及其最适浓度,转化条件(菌体浓度、p H、青霉素浓度、MOPS浓度、葡萄糖浓度,铁离子浓度和时间等)。优化后,建立了全细胞催化法生产G-7-ADCA的工艺流程,使G-7-ADCA的产量稳定在15 mmol/L左右,转化率达到30%,具有操作简便、高效和经济的优势。     

淀粉酶的发酵条件优化及淀粉糖的酶法制备综述

淀粉糖现在广泛运用在食品添加领域,在制造过程中通过微生物发酵获得淀粉酶,然后用淀粉酶水解淀粉进行生产。淀粉糖品种比较多,淀粉的结构和淀粉糖生产步骤现在研究得比较清楚。在生产中需要用到遗传工程、细胞工程和发酵工程、酶工程等各种技术。本综述就是探索利用单因素法、多因素法、正交法、Plackett-Burman设计等各种方法和经济学原理获得最佳培养基和培养条件生产较多的淀粉酶;然后优化酶促反应的条件及如何运用到淀粉糖的制备里及废水综合利用(如蛋白质提取)及净化等。     

L-氨基酸脱氨酶的分子改造及其用于全细胞催化法生产α-酮戊二酸条件的优化

酮戊二酸(α-ketoglutaric acid,α-KG)是谷氨酸脱氨基的酮酸产物,作为一种重要的有机酸广泛用于食品、医药、精细化工等领域。为提高L-氨基酸脱氨酶全细胞催化法合成α-KG的效率及产量,首先通过优化全细胞催化剂制备条件及全细胞转化反应条件,包括发酵过程中的温度、诱导剂浓度、诱导剂添加时刻、诱导时间等;全细胞转化过程中的温度、pH、细胞量、转化时间。各个条件优化后以200g/L谷氨酸钠为底物时,产量最终提高了54. 9%,摩尔转化率为39. 6%。其次,通过定点饱和突变对L-氨基酸脱氨酶进行定向进化以提高其催化能力。经过多次突变、筛选,最优突变体E. coli BL21-pET-20b(+)-pm1152催化200g/L谷氨酸钠生成α-KG最高产量为100. 9g/L,摩尔转化率为64. 7%,较最初对照菌株提高了66. 3%。结果表明,条件优化和饱和突变可有效提高重组大肠杆菌全细胞转化合成α-KG的能力。     

蓟马采集和玻片标本的制作

介绍蓟马标本的采集方法、常规鉴定用的临时性玻片和存档及分类用的永久性玻片标本的制作方法。标本的采集主要是拍打植物花朵、叶片及枯枝,玻片的制作重点介绍了制作存档和分类用的永久性玻片的5个步骤,即浸解脱色、洗涤、脱水、整姿封盖和干燥。     

Determination of the periphyton production by means of the glass slide method

Summary By means of the glass slide method a study of the periphyton production was performed in the Sedlice Reservoir (Bohemia, Czechoslovakia) during the period July 30, 1958 – June 8th, 1959.The gravimetric mass analysis of the periphyton rendered at 9 sampling dates in 4–6 weeks intervals results for 4 depths (1, 3, 6, 9 m) including the zone of producers, the transitory zone, zone of consumers as well as the benthic zone.The air-dry weight and the dry weight (105°C) showed almost identical results. The dry weight formed in the average 8,0 % of the wet weight. The following values were calculated on the basis of the literature data: the ash-free dry weight by subtracting 20 % from the dry weight, the N-content as 7 % of the ash-free dry weight and the chlorophyll a content as 1,3 % of the ash-free dry weight.The biomass of the periphyton ranged between 0 and 491 mg/sq. dm of the ash-free dry weight with an average value 127,0. The highest values occurred in the depth of 1 m, the lowest near the bottom.The net production rate ranged between 10 and 1010 mg/sq.m/day of the ash-free dry weight with an average value 213. The highest mean value occurred in the depth of 6 m (280), the lowest in the depth of 9 m (91 mg/sq.m/day). The greatest production rates were found in March at all depths.The population turnover was different in each depth. In the depth of 1 m it equals 69,6 days, in 3 m 53,6 days, in 6 m 45,2 days, in 9 m 90,9 days. As a mean 59,6 = 60 days can be accepted. These are the longest turnover values determined at anyelse periphyton community. In the Sedlice Reservoir the periphyton renewes itself 6 times in the course of the year.All results gained were compared with similar data published by different authors. An attempt of correlation of these production data was undertaken, but no clear and reliable relationships could be detected.

---

Zusammenfassung Unter Anwendung der Glassplattenmethode wurde eine Untersuchung der Produktion des Aufwuchses in der Sedlice-Talsperre (Böhmen, Tschechoslowakei) in der Zeit vom 30. Juli 1958 bis 8. Juni 1959 durchgeführt.Die angewendete gravimetrische Globalmethode brachte an 9 Entnahmetagen (in 4–6 Wochen-Intervalen) Ergebnisse für 4 Tiefen (1, 3, 6, 9 m), die die Zone der Produzenten, die Übergangszone, die Zone der Konsumenten sowie die benthische Zone darstellen.Das Lufttrockengewicht und das Trockengewicht bei 105°C ergaben fast identische Ergebnisse. Das Trockengewicht stellte im Durchschnitt 8,0 % des Feuchtgewichtes dar. Die folgenden Werte wurden auf Grund von Literaturangaben ausgerechnet: das aschenfreie Trockengewicht durch die Subtraktion von 20 % vom Trockengewicht, der Stickstoffgehalt als 7 % des aschenfreien Trockengewichtes und der Chlorophyllgehalt als 1,3 % des aschenfreien Trockengewichtes.Die Biomasse des Aufwuchses schwankte zwischen 0 und 491 mg/m² des aschenfreien Trockengewichtes und zeigte den durchschnittlichen Wert 127,0. Die höchsten Werte kamen in der Tiefe 1 m und die niedrigsten in 9 m vor.Die Netto-Produktion des Aufwuchses schwankte zwischen 10 und 1010 mg/m²/Tag aschenfreier Trockensubstanz und zeigte den durchschnittlichen Wert 213,0. Die höchsten Durchschnittswerte waren in der Tiefe 6 m (280) und die niedrigsten in 9 m (91 mg/m²/Tag) zu verzeichnen. Im März fand sich in allen Tiefen die höchste Produktion.Der Erneuerungskoeffizient änderte sich mit der Tiefe. In 1 m betrug er 69,6 Tage, in 3 m 53,6 Tage, in 6 m 45,2 Tage, in 9 m 90,9 Tage und im Durchschnitt 59,6 = 60 Tage. Diese Werte sind als die längsten, die irgendwann im Aufwuchse ermittelt wurden, anzusehen. Das heisst, dass sich der Aufwuchs in der Sedlice-Talsperre nur sechsmal im Jahre erneuert.Alle erzielten Resultate wurden mit ähnlichen Literaturangaben verschiedener Autoren verglichen. Es wurde ein Versuch unternommen, alle verfügbaren Produktionswerte zur Korrelation zu bringen, eine klare Abhängigkeit konnte jedoch nicht festgestellt werden.

     

Distortion of the spermathecae of phytoseiid mites (Acari: Phytoseiidae) in slide preparation

The shape and dimensions of the spermathecae are taxonomically important characteristics in phytoseiid mites. In experiments with Neoseiulus californicus (McGregor) and Typhlodromus pyri Scheuten, the shape of the cervix of the spermatheca changed considerably and its diameter was increased by 42–49% when mites were flattened, compared to being mounted with 140m spacers underneath the coverslips. Dimensions of the dorsal shield were also affected by flattening, increasing by 3–5%.     

Stabilization of immobilized l-arabinose isomerase for the production of d-tagatose from d-galactose

The aim of this work was to develop a stable immobilized enzyme biocatalyst for the isomerization of d -galactose to d -tagatose at high temperature. l -Arabinose isomerase from the hyperthermophilic bacterium Thermotoga maritima (TMAI) was produced as a (His)₆-tagged protein, immobilized on a copper–chelate epoxy support and subjected to several postimmobilization treatments aimed at increasing its operational and structural stability. Treatment with glutaraldehyde and ethylenediamine resulted in a more than twofold increase in the operational stability and in all enzyme subunits linked, directly or indirectly, to the support via covalent bonds. A postimmobilization treatment of the immobilized derivatives with mercaptoethanol for the removal of any remaining copper ions, determined a further increase of the operational biocatalytic activity. Immobilized derivatives subjected to both treatments were used for the bioconversion of 18 g/L d -galactose to d -tagatose at 80°C in a packed bed reactor in three repeated cycles and showed a better operational stability compared with the literature data. This study shows that a postimmobilization stabilization treatment with glutaraldehyde and ethylenediamine can stabilize the multi-subunit structure of an enzyme immobilized on a metal-chelate epoxy support with an increase of its operational stability, results that are not easily achievable with the sole immobilization on epoxy or metal chelate-epoxy supports in the case of complex multimeric enzymes with geometric incongruence with the support.     

Optimization on preparation condition of polyunsaturated fatty acids nanoliposome prepared by Mozafari method

This study presents the application of the response surface methodology (design) to develop an optimal preparation condition (independent variables) namely shear rate (600–1000?rpm), mixing time (30–60?min), and sonication time (10–20?min) for polyunsaturated fatty acids (docosahexaenoic acid and eicosapentaenoic acid) nanoliposomes. Fifteen lipid mixtures were generated by the Box–Behnken design and nanoliposomes were prepared by the Mozafari (direct hydration and without using organic solvents) method. Nanoliposomes were characterized with respect to entrapment efficiency (EE) and vesicle size as Y₁ and Y₂ dependent variables, respectively. The results were then applied to estimate the coefficients of response surface model and to find the optimal preparation conditions with maximum EE and minimum vesicle size. The response surface analysis exhibited that the significant (p?p?>?0.05) lack of fit for the reduced models. The response optimization of experiments was the shear rate: 795?rpm; mixing time: 60?min; and sonication time: 10?min. The optimal nanoliposome had an average diameter of 81.4?nm and EE of 100%. The experimental results of optimal nanoliposomes characterization confirmed an accurate fitness of the predicted values by reduced response surface models.     

Optimizing the immobilization of single-stranded DNA onto glass beads

The attachment of single-stranded DNA to a solid support has many biotechnology and molecular biology applications. This paper compares different immobilization chemistries to covalently link single-stranded DNA (20 base pairs), oligo(1), onto glass beads via a 5'-amino terminal end. Immobilization methods included a one-step 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) and a two-step EDC reaction to succinylated and PEG-modified glass beads. The third method used 1,4-phenylene diisothiocyanate to immobilize oligo(1) to aminopropyl glass beads. The influence of coupling buffer, oligo(1) concentration, and EDC concentration was also investigated. The one-step EDC-mediated procedure with succinylated or PEG-modified beads in 0.1 M MES buffer, pH 4.5, resulted in the highest immobilization efficiency, 82-89%. EDC concentrations greater than 50 mM and oligo(1) concentrations of 3 microg/g bead were required for effective immobilization. A complementary oligonucleotide, oligo(2), was able to hybridize to the immobilized oligo(1) with a 58% efficiency. This oligonucleotide was subsequently released at 70 degrees C. The relationship between the surface density of oligo(1) and the hybridization efficiency of the complementary oligonucleotide is described.     

The role of paraldehyde in the rapid preparation of aldehyde fuchsin

Preparation of aldehyde fuchsin normally requires ripening for 3 to 5 days. By using a 5-fold excess of paraldehyde a fully potent aldehyde fuchsin can be prepared in 24 hr at room temperature. Aldehyde fuchsin prepared by both normal and accelerated ripening afforded comparable results, including selective staining of unoxidized pancreatic B cells. Dried aldehyde fuchsin prepared form pararosaniline and reconstituted in acid alcohol has spectrophotometric properties different form the ripened strain. Reconstituted aldehyde fuchsin stains unoxidized B cells adequately only if staining time is extended. Excess paraldehyde added to reconstituted aldehyde fuchsin retards decomposition but does not produce a normal stain by spectrophotometric standards. Warming of aldehyde fuchsin solutions to accelerate ripening has been shown to produce deleterious effects and should be avoided.     

毛栓菌原生质体制备和再生及单核菌株产漆酶特性

毛栓菌Trametes hirsuta能有效地降解木质素,在生物燃料、制浆和饲料工业等方面具有很高应用价值。为了获得遗传性能稳定的T. hirsuta单核菌株,研究了其菌丝生长培养基的类型、菌丝生长时间（菌龄）、酶解时间、原生质体纯化离心速度和原生质体再生培养基类型对T. hirsuta YJ-9-1原生质体制备与再生的影响;采用DAPI染色和锁状联合缺失的观察,从再生株中筛选单核菌株并考察其产酶特性。结果表明：采用YGM菌丝生长培养基、88h菌龄、1h酶解时间、4,000r/min原生质体纯化离心速度以及YGMS再生培养基,最终可获得密度大约为5.0×106个/mL的原生质体悬浮液和9.1%的再生率;从200株再生菌株中筛选出了3株单核菌株,其中一株单核菌株D-2-1的漆酶产量比原菌T. hirsuta YJ-9-1明显提高,在第12天其漆酶酶活为771.67U/L,是原菌的1.51倍。     

Development of an immobilization method of L-arabinose isomerase for industrial production of tagatose

Of the immobilization methods tested, alginate beads treated with glutaraldehyde gave the most stable and economic method for immobilizing l-arabinose isomerase for the industrial production of tagatose. l-Arabinose isomerase immobilized in a packed-bed reactor produced an average of 30 g tagatose l^–1 day^–1 from 100 g galactose l^–1 for 8 days.     

Optimization of culture condition for the production of D-amino acid oxidase in a recombinant Escherichia coli

The gene encoding D-amino acid oxidase (DAAO) from Trigonopsis variabilis CBS 4095 has been cloned and expressed in Escherichia coli BL21 (DE3). Unfortunately, it was observed that the host cell was negatively affected by the expressed DAAO, resulting in a remarkable decrease in cell growth. To overcome this problem, we investigated several factors that affect cell growth rate and DAAO production such as addition time of inducer and dissolved oxygen (DO) concentration. The addition time of lactose, which was used as an inducer, and DO concentration appeared to be critical for the cell growth of E. coli BL21 (DE3)/pET-DAAO. A two-stage DO control strategy was developed, in which the DO concentration was controlled above 50% until specific stage of bacterial growth (OD₆₀₀ 30–40) and then downshifted to 30% by changing the agitation speed and aeration rate, and they remained at these rates until the end of fermentation. With this strategy, the maximum DAAO activity and cell growth reached 18.5 U/mL and OD₆₀₀ 81, respectively. By reproducing these optimized conditions in a 12-m³ fermentor, we were able to produce DAAO at a productivity of 19 U/mL with a cell growth of OD₆₀₀ 80.