A thermostable triple mutant of pyranose 2-oxidase from Trametes multicolor with improved properties for biotechnological applications

In order to increase the thermal stability and the catalytic properties of pyranose oxidase (P2Ox) from Trametes multicolor toward its poor substrate D-galactose and the alternative electron acceptor 1,4-benzoquinone (1,4-BQ), we designed the triple-mutant T169G/E542K/V546C. Whereas the wild-type enzyme clearly favors D-glucose as its substrate over D-galactose [substrate selectivity (k_cat/K_M)_Glc/(k_cat/K_M)_Gal = 172], the variant oxidizes both sugars equally well [(k_cat/K_M)_Glc/(k_cat/K_M)_Gal = 0.69], which is of interest for food biotechnology. Furthermore, the variant showed lower K_M values and approximately ten-fold higher k_cat values for 1,4-BQ when D-galactose was used as the saturating sugar substrate, which makes this enzyme particularly attractive for use in biofuel cells and enzyme-based biosensors. In addition to the altered substrate specificity and reactivity, this mutant also shows significantly improved thermal stability. The half life time at 60°C was approximately 10 h, compared to 7.6 min for the wild-type enzyme. We performed successfully small-scale bioreactor pilot conversion experiments of D -glucose/D -galactose mixtures at both 30 and 50°C, showing the usefulness of this P2Ox variant in biocatalysis as well as the enhanced thermal stability of the enzyme. Moreover, we determined the crystal structure of the mutant in its unligated form at 1.55 Å resolution. Modeling D-galactose in position for oxidation at C2 into the mutant active site shows that substituting Thr for Gly at position 169 favorably accommodates the axial C4 hydroxyl group that would otherwise clash with Thr169 in the wild-type.     

Evaluation of kinetic data: What the numbers tell us about PRMTs

Protein arginine N-methyltransferase (PRMT) kinetic parameters have been catalogued over the past fifteen years for eight of the nine mammalian enzyme family members. Like the majority of methyltransferases, these enzymes employ the highly ubiquitous cofactor S-adenosyl-l-methionine as a co-substrate to methylate arginine residues in peptidic substrates with an approximately 4-μM median K_M. The median values for PRMT turnover number (k_cat) and catalytic efficiency (k_cat/K_M) are 0.0051 s⁻¹ and 708 M⁻¹ s⁻¹, respectively. When comparing PRMT metrics to entries found in the BRENDA database, we find that while PRMTs exhibit high substrate affinity relative to other enzyme-substrate pairs, PRMTs display largely lower k_cat and k_cat/K_M values. We observe that kinetic parameters for PRMTs and arginine demethylase activity from dual-functioning lysine demethylases are statistically similar, paralleling what the broader enzyme families in which they belong reveal, and adding to the evidence in support of arginine methylation reversibility.     

Aryl acylamidase activity of human serum albumin with o-nitrotrifluoroacetanilide as the substrate

Albumin is generally regarded as an inert protein with no enzyme activity. However, albumin has esterase activity as well as aryl acylamidase activity. A new acetanilide substrate, o-nitrotrifluoroacetanilide (o-NTFNAC), which is more reactive than the classical o-nitroacetanilide, made it possible to determine the catalytic parameters for hydrolysis by fatty-acid free human serum albumin. Owing to the low enzymatic activity of albumin, kinetic studies were performed at high albumin concentration (0.075 mM). The albumin behavior with this substrate was Michaelis-Menten like. Kinetic analysis was performed according to the formalism used for catalysis at high enzyme concentration. This approach provided values for the turnover and dissociation constant of the albumin-substrate complex: k_cat = 0.13 ± 0.02 min ? ¹ and K_s = 0.67 ± 0.04 mM. MALDI-TOF experiments showed that unlike the ester substrate p-nitrophenyl acetate, o-NTFNAC does not form a stable adduct (acetylated enzyme). Kinetic analysis and MALDI-TOF experiments demonstrated that hydrolysis of o-NTFNAC by albumin is fully rate-limited by the acylation step (k_cat = k₂). Though the aryl acylamidase activity of albumin is low (k_cat/K_s = 195 M^{? 1}min^{? 1}), because of its high concentration in human plasma (0.6–1 mM), albumin may participate in hydrolysis of aryl acylamides through second-order kinetics. This suggests that albumin may have a role in the metabolism of endogenous and exogenous aromatic amides, including drugs and xenobiotics.     

Identification of Residues Surrounding the Active Site of Type A Botulinum Neurotoxin Important for Substrate Recognition and Catalytic Activity

Type A botulinum neurotoxin is one of the most lethal of the seven serotypes and is increasingly used as a therapeutic agent in neuromuscular dysfunctions. Its toxic function is related to zinc-endopeptidase activity of the N-terminal light chain (LC) on synaptosome-associated protein-25 kDa (SNAP-25) of the SNARE complex. To understand the determinants of substrate specificity and assist the development of strategies for effective inhibitors, we used site-directed mutagenesis to investigate the effects of 13 polar residues of the LC on substrate binding and catalysis. Selection of the residues for mutation was based on a computational analysis of the three-dimensional structure of the LC modeled with a 17-residue substrate fragment of SNAP-25. Steady-state kinetic parameters for proteolysis of the substrate fragment were determined for a set of 16 single mutants. Of the mutated residues non-conserved among the serotypes, replacement of Arg-230 and Asp-369 by polar or apolar residues resulted in drastic lowering of the catalytic rate constant (k _cat), but had less effect on substrate affinity (K _m). Substitution of Arg-230 with Lys decreased the catalytic efficiency (k _cat/K _m) by 50-fold, whereas replacement by Leu yielded an inactive protein. Removal of the electrostatic charge at Asp-369 by mutation to Asn resulted in 140-fold decrease in k _cat/K _m. Replacement of other variable residues surrounding the catalytic cleft (Glu-54, Glu-63, Asn-66, Asp-130, Asn-161, Glu-163, Glu-170, Glu-256), had only marginal effect on decreasing the catalytic efficiency, but unexpectedly the substitution of Lys-165 with Leu resulted in fourfold increase in k _cat/K _m. For comparison purposes, two conserved residues Arg-362 and Tyr-365 were investigated with substitutions of Leu and Phe, respectively, and their catalytic efficiency decreased 140- and 10-fold, respectively, whereas substitution of the tyrosine ring with Asn abolished activity. The altered catalytic efficiencies of the mutants were not due to any significant changes in secondary or tertiary structures, or in zinc content and thermal stability. We suggest that, despite the large minimal substrate size for catalysis, only a few non-conserved residues surrounding the active site are important to render the LC competent for catalysis or provide conformational selection of the substrate.     

Mutations of Thr169 affect substrate specificity of pyranose 2-oxidase from Trametes multicolor

Site-directed mutagenesis was used to enhance the catalytic activity of pyranose 2-oxidase (P2Ox) from Trametes multicolor with different substrates. To this end, threonine at position 169 was replaced by glycine, alanine and serine, respectively. Using oxygen as electron acceptor the mutant T169G was equally active with d-glucose and d-galactose, whereas wild-type recombinant P2Ox only showed 5.2% relative activity with the latter substrate. When d-galactose was used as electron donor in saturating concentrations, T169G showed a 4.5-fold increase in its catalytic efficiency k_cat/K_M for the alternative electron acceptor 1,4-benzoquinone and a nine-fold increased k_cat/K_M value with the ferricenium ion compared with wt recP2Ox. Variant T169S showed an increase in its catalytic efficiency both with 1,4-benzoquinone (3.7 times) as well as with the ferricenium ion (1.4 times) when d-glucose was the substrate.     

OptZyme: Computational Enzyme Redesign Using Transition State Analogues

OptZyme is a new computational procedure for designing improved enzymatic activity (i.e., k_cat or k_cat/K_M) with a novel substrate. The key concept is to use transition state analogue compounds, which are known for many reactions, as proxies for the typically unknown transition state structures. Mutations that minimize the interaction energy of the enzyme with its transition state analogue, rather than with its substrate, are identified that lower the transition state formation energy barrier. Using Escherichia coli β-glucuronidase as a benchmark system, we confirm that K_M correlates (R² = 0.960) with the computed interaction energy between the enzyme and the para-nitrophenyl- β, D-glucuronide substrate, k_cat/K_M correlates (R² = 0.864) with the interaction energy of the transition state analogue, 1,5-glucarolactone, and k_cat correlates (R² = 0.854) with a weighted combination of interaction energies with the substrate and transition state analogue. OptZyme is subsequently used to identify mutants with improved K_M, k_cat, and k_cat/K_M for a new substrate, para-nitrophenyl- β, D-galactoside. Differences between the three libraries reveal structural differences that underpin improving K_M, k_cat, or k_cat/K_M. Mutants predicted to enhance the activity for para-nitrophenyl- β, D-galactoside directly or indirectly create hydrogen bonds with the altered sugar ring conformation or its substituents, namely H162S, L361G, W549R, and N550S.     

Inducibility of Rat Liver Drug-Metabolizing Enzymes as an Index of Food-Screeing for Safety Assessment

D-Lactate dehydrogenase (D-LDH) from Pediococcus pentosaceus ATCC 25745 was found to produce D-3-phenyllactic acid from phenylpyruvate. The optimum pH and temperature for enzyme activity were pH 5.5 and 45 °C. The Michaelis-Menten constant (K _m), turnover number (k _cat), and catalytic efficiency (k _cat?K _m) values for the substrate phenylpyruvate were estimated to be 1.73 mmol/L, 173 s^?1, and 100 (mmol/L)^?1 s^?1 respectively.     

Formulation of a Universal First-Order Rate Constant for Enzymatic Reactions

It is a common practice to employ k _cat[E]₀/K _m as a first-order rate constant for the analysis of an enzymatic reaction, where [E]₀ is the total enzyme concentration. I describe in this report a serious shortcoming in analyzing enzymatic reactions when k _cat[E]₀/K _m is employed and show that k _cat[E]₀/K _m can only be applied under very limited conditions. I consequently propose the use of a more universal first-order rate constant, k _cat[ES]_K/[S]₀, where [ES]_K is the initial equilibrium concentration of the ES-complex derived from [E]₀, [S]₀ and K _m. Employing k _cat[ES]_K/[S]₀ as the first-order rate constant enables all enzymatic reactions to be reasonably simulated under a wide range of conditions, and the catalytic and binding contributions to the rate constant of any enzyme can be determined under any and all conditions.     

Purification and Characterization of Aspartic Protease Derived from Sf9 Insect Cells

An aspartic protease that is significantly produced by baculovirus-infected Spodoptera frugiperda Sf9 insect cells was purified to homogeneity from a growth medium. To monitor aspartic protease activity, an internally quenched fluoresce (IQF) substrate specific to cathepsin D was used. The purified aspartic protease showed a single protein band on SDS–PAGE with an apparent molecular mass of 40 kDa. The N-terminal amino acid sequence of the enzyme had a high homology to a Bombyx mori aspartic protease. The enzyme showed greatest affinity for the IQF substrate at pH 3.0 with a K _m of 0.85 μM. The k _cat and k _cat?K _m values were 13 s^?1 and 15 s^?1 μM^?1 respectively. Pepstatin A proved to be a potent competitive inhibitor with inhibitor constant, K _i, of 25 pM.     

Biochemical characterization of the decaprenyl diphosphate synthase of Rhodobacter sphaeroides for coenzyme Q10 production

Coenzyme Q₁₀ (CoQ₁₀), like other CoQs of various organisms, plays indispensable roles not only in energy generation but also in several other processes required for cells’ survival. In this study, a gene encoding for a decaprenyl diphosphate synthase (Rsdds) was cloned from Rhodobacter sphaeroides in Escherichia coli. The in vivo catalytic activity and product specificity of Rsdds were compared with those of a counterpart enzyme from Agrobacterium tumefaciens (Atdds) in E. coli as a heterologous host. In contrast with Atdds, Rsdds showed lower catalytic activity but higher product specificity for CoQ₁₀ production, as indicated by the amount of CoQ₉ formation. The higher product specificity of Rsdds was also confirmed by utilizing both Rsdds and Atdds for in vitro synthesis of polyprenyl diphosphates. Thin layer chromatography indicated that the Rsdds enzyme resulted in relatively much less solanesyl diphosphate formation. The purified Rsdds catalyzed the addition of isopentenyl diphosphate to dimethyl allyl diphosphate, geranyl diphosphate, ω,E,E-farnesyl diphosphate (FPP), and ω,E,E,E-geranylgeranyl diphosphate as priming substrates. The kinetic parameters of V _max (pmol/min), K _M (μM), k _cat (1/min), and k _cat /K _M of the enzyme using FPP as the most appropriate substrate were determined to be 264.6, 13.1, 8.8, and 0.67, respectively.     

Contributions of binding and catalytic rate constants to evolutionary modifications inKm of NADH for muscle-type (M4) lactate dehydrogenases

Summary The apparent Michaelis constant (K _m) of NADH for muscle-type (M₄ isozyme) lactate dehydrogenases (LDHs) is highest, at any given temperature of measurement, for LDHs of cold-adapted vertebrates (Table 1). However, these interspecific differences in theK _m of NADH are not due to variations in LDH-NADH binding affinity. Rather, theK _m differences result entirely from interspecific variation in the substrate turnover constant (k _cat) (Fig. 1; Table 2). This follows from the fact that theK _m of NADH is equal tok _cat divided by the on constant for NADH binding to LDH,k ₁, so that interspecific differences ink _cat, combined with identical values fork ₁ among different LDH reactions, make the magnitude of theK _m of NADH a function of substrate turnover number. The temperature dependence of theK _m of NADH for a single LDH homologue is the net result of temperature dependence of bothk _cat andk ₁ (Figs. 3 and 4). Temperature independentK _m values can result from simultaneous, and algebraically offsetting, increases ink _cat andk ₁ with rising temperature. Salt-induced changes in theK _m of NADH also may be due to simultaneous perturbation of bothk _cat andk ₁ (Table 3). These findings are discussed from the standpoint of the evolution of LDH kinetic properties, particularly the interspecific conservation of catalytic and regulatory functions, in differently-adapted species.     

The metal ion requirements of Arabidopsis thaliana Glx2-2 for catalytic activity

In an effort to better understand the structure, metal content, the nature of the metal centers, and enzyme activity of Arabidopsis thaliana Glx2-2, the enzyme was overexpressed, purified, and characterized using metal analyses, kinetics, and UV–vis, EPR, and ¹H NMR spectroscopies. Glx2-2-containing fractions that were purple, yellow, or colorless were separated during purification, and the differently colored fractions were found to contain different amounts of Fe and Zn(II). Spectroscopic analyses of the discrete fractions provided evidence for Fe(II), Fe(III), Fe(III)–Zn(II), and antiferromagnetically coupled Fe(II)–Fe(III) centers distributed among the discrete Glx2-2-containing fractions. The individual steady-state kinetic constants varied among the fractionated species, depending on the number and type of metal ion present. Intriguingly, however, the catalytic efficiency constant, k _cat/K _m, was invariant among the fractions. The value of k _cat/K _m governs the catalytic rate at low, physiological substrate concentrations. We suggest that the independence of k _cat/K _m on the precise makeup of the active-site metal center is evolutionarily related to the lack of selectivity for either Fe versus Zn(II) or Fe(II) versus Fe(III), in one or more metal binding sites.     

PURIFICATION AND PHYSICOKINETIC CHARACTERIZATION OF A GLUCONOLACTONE INHIBITION-INSENSITIVE β-GLUCOSIDASE FROM Andrographis paniculata NEES. LEAF

A gluconolactone inhibition-insensitive β-glucosidase from Andrographis paniculata (Acanthaceae) leaves has been isolated, homogeneity purified, and characterized for its physicokinetic properties. The purified enzyme appeared to be a monomeric structure with native molecular weight about 60 kD. The enzyme exhibited optimum pH 5.5 and pI 4.0, meso-thermostability and high temperature optimum (55°C) for catalytic activity, with activation energy of 6.8 kcal Mol^?1. The substrate saturation kinetics studies of the enzyme revealed a Michaelis–Menten constant (K_m) of 0.25 mM for pNPG and catalytic efficiency (K_cat/K_m) of 52,400 M ^?1 s^?1, respectively. Substrate specificity of the enzyme was restricted to β-linked gluco-, manno- and fuco-conjugates. The gluconolactone inhibition insensitivity was evident from its very low inhibition at millimolar inhibitor concentrations. Interestingly, the enzyme showed geraniol transglucosylating activity with pNPG as glucosyl donor but not with cellobiose. The catalytic activity of the enzyme has been reported to be novel with respect to its activity and preferences from a medicinal plant resource.     

Characterization of an inducible nitrilase from a thermophilic bacillus

Nitrilase activity was induced in the thermophilic bacterium Bacillus pallidus strain Dac521 by growth on benzonitrile-supplemented minimal medium. The enzyme had a subunit relative molecular mass of 41 kDa but was purified as a complex with a putative GroEL protein (total M _r, 600 kDa). The enzyme catalyzed the hydrolysis of aliphatic, aromatic, and heterocyclic nitriles with widely varying k _cat/K _M values, primarily the result of differences in substrate affinity. Of the nitriles tested, 4-cyanopyridine was hydrolyzed at the fastest rate. Substitution of benzonitrile at the meta or para position either had no effect on catalytic rate or enhanced k _cat, while ortho-substitution was strongly inhibitory, probably because of steric hindrance. The effect of catalytic inhibitors was consistent with the presence of active site thiol residues although activity was little affected by putative thiol reagents such as iodoacetate, iodoacetamide, and N-methylmaleimide. Enzymatic activity was constant between pH 6 and 9 with an optimum at pH 7.6. The optimal temperature for activity was 65°C with rapid activity loss at higher temperatures. The purified nitrilase-GroEL complex had the following half-lives of activity: 8.4 h at 50°C, 2.5 h at 60°C, 13 min at 70°C, and less than 3 min at 80°C. Received: March 1, 1999 / Accepted: August 3, 1999     

STUDIES ON THE KINETICS OF ACETYLCHOLINESTERASE IN THE RESISIANT AND SUSCEPTIBLE STRAINS OF HOUSEFLY (MUSCA DOMESTICA)

Abstract Acetylcholinesterase (AChE) in the susceptible (S) and the resistant (R) strains of housefly (Musca domestica) was investigated using kinetic analysis. The V_max values of AChE for hydrolyzing acetylthiocholine (ATCh) and butyrylthiocholine (BTCh) were 4578.50 and 1716.08nmol/min/mg* protein in the R strain, and were 1884.75 and 864.72 nmol/min/mg. protein in the Sstrain, respectively. The V_max ratios of R to S enzyme were 2.43 for ATCh and 1.98 for BTCh. The K_m values of AChE for ATCh and BTCh were 0.069 and 0.034 mmol/L in the S strain, and 0.156, 0.059 mmol/L in the R strain, respectively. The K_m ratios of R to S enzyme were 2.26 for ATCh and 1.74 for BTCh. The k_i ratios of S to R enzyme for three insecticides propoxur, methomyl and paraoxon were 46.04, 4.17 and 2. 86, respectively. In addition, k_cat and k_cat/K_m for measuring turnover and catalytic efficiency of AChE were determined using eserine as titrant. The k_cat values of AChE from the R strain for both ATCh and BTCh were higher than those values from the S strain. But the values of k_cat/K_m were in contrary to the k_cat values with R enzyme compared to S enzyme. The AChE catalytic properties and sensitivity to the inhibition by three insecticides in the R and S strains of housefly were discussed based on contribution of V_max, K_m, k_i, k_cat and k_cat/K_m. All these data implied that AChE from the R strain might be qualitatively altered. We also observed an intriguing phenomenon that inhibitors could enhance the activity of AChE from the resistant strain. This “flight reaction” of the powerful enzyme might be correlated with the developing resistance of housefly to organophosphate or carbamate insecticides.     

Solvent isotope and viscosity effects on the steady-state kinetics of the flavoprotein nitroalkane oxidase

The flavoprotein nitroalkane oxidase catalyzes the oxidative denitrification of a broad range of primary and secondary nitroalkanes to yield the respective aldehydes or ketones, hydrogen peroxide and nitrite. With nitroethane as substrate the ^D2O(k_cat/K_M) value is 0.6 and the ^D2Ok_cat value is 2.4. The k_cat proton inventory is consistent with a single exchangeable proton in flight, while the k_cat/K_M is consistent with either a single proton in flight in the transition state or a medium effect. Increasing the solvent viscosity did not affect the k_cat or k_cat/K_M value significantly, establishing that nitroethane binding is at equilibrium and that product release does not limit k_cat.     

Enzymatic activity and thermal stability of PEG-α-chymotrypsin conjugates

α-Chymotrypsin was chemically modified with methoxypoly(ethylene glycol) (PEG) of different molecular weights (700, 2,000, and 5,000 Da) and the amount of polymer attached to the enzyme was varied systematically from 1 to 9 PEG molecules per enzyme molecule. Upon PEG conjugation, enzyme catalytic turnover (k _cat) decreased by 50% and substrate affinity was lowered as evidenced by an increase in the K _M from 0.05 to 0.19 mM. These effects were dependent on the amount of PEG bound to the enzyme but were independent of the PEG size. In contrast, stabilization toward thermal inactivation depended on the PEG molecular weight with conjugates with the larger PEGs being more stable.     

The X-ray crystallographic structure and specificity profile of HAD superfamily phosphohydrolase BT1666: comparison of paralogous functions in B. thetaiotaomicron

Analysis of the haloalkanoate dehalogenase superfamily (HADSF) has uncovered homologues occurring within the same organism that are found to possess broad, overlapping substrate specificities, and low catalytic efficiencies. Here we compare the HADSF phosphatase BT1666 from Bacteroides thetaiotaomicron VPI‐5482 to a homologue with high sequence identity (40%) from the same organism BT4131, a known hexose‐phosphate phosphatase. The goal is to find whether these enzymes represent duplicated versus paralogous activities. The X‐ray crystal structure of BT1666 was determined to 1.82 Å resolution. Superposition of the BT1666 and BT4131 structures revealed a conserved fold and identical active sites suggestive of a common physiological substrate. The steady‐state kinetic constants for BT1666 were determined for a diverse panel of phosphorylated metabolites to define its substrate specificity profile and overall level of catalytic efficiency. Whereas BT1666 and BT4131 are both promiscuous, their substrate specificity profiles are distinct. The catalytic efficiency of BT1666 (k_cat/K_m = 4.4 × 10²M^?1 s^?1 for the best substrate fructose 1,6‐(bis)phosphate) is an order of magnitude less than that of BT4131 (k_cat/K_m = 6.7 × 10³M^?1 s^?1 for 2‐deoxyglucose 6‐phosphate). The seemingly identical active‐site structures point to sequence variation outside the active site causing differences in conformational dynamics or subtle catalytic positioning effects that drive the divergence in catalytic efficiency and selectivity. The overlapping substrate profiles may be understood in terms of differential regulation of expression of the two enzymes or a conferred advantage in metabolic housekeeping functions by having a larger range of possible metabolites as substrates. Proteins 2011;. © 2011 Wiley‐Liss, Inc.     

Immobilisation of laccase on Eupergit supports and its application for the removal of endocrine disrupting chemicals in a packed-bed reactor

Laccase from Myceliophthora thermophila was covalently immobilised on Eupergit C and Eupergit C 250L yielding specific activities of up to 17 and 80 U/g, respectively. Due to its superior activity, Eupergit C 250L was chosen for further research. The somewhat lower catalytic efficiency (based on the ratio between the turnover number and the Michaelis constant, k_cat/K_M) of the immobilised enzyme in comparison with that of the free enzyme was balanced by its increased stability and broader operational window related to temperature and pH. The feasibility of the immobilised laccase was tested by using a packed bed reactor (PBR) operating in consecutive cycles for the removal of Acid Green 27 dye as model substrate. High degrees of elimination were achieved (88, 79, 69 and 57% in 4 consecutive cycles), while the levels of adsorption on the support varied from 18 to 6%, proving that dye removal took place mainly due to the action of the enzyme. Finally, a continuous PBR with the solid biocatalyst was applied for the treatment of a solution containing the following endocrine disrupting chemicals: estrone (E1), 17β-estradiol (E2) and 17α-ethinylestradiol (EE2). At steady-state operation, E1 was degraded by 65% and E2 and EE2 were removed up to 80% and only limited adsorption of these compounds on the support, between 12 and 22%, was detected. In addition, a 79% decrease in estrogenic activity was detected in the effluent of the enzymatic reactor while only 14% was attained by inactivated laccase.     

Human enteropeptidase light chain: Bioengineering of recombinants and kinetic investigations of structure and function

The serine protease enteropeptidase exhibits a high level of substrate specificity for the cleavage sequence DDDDK～ X, making this enzyme a useful tool for the separation of recombinant protein fusion domains. In an effort to improve the utility of enteropeptidase for processing fusion proteins and to better understand its structure and function, two substitution variants of human enteropeptidase, designated R96Q and Y174R, were created and produced as active (>92%) enzymes secreted by Pichia pastoris with yields in excess of 1.7 mg/Liter. The Y174R variant showed improved specificities for substrates containing the sequences DDDDK (k_cat/K_M = 6.83 × 10⁶ M^?1 sec^?1) and DDDDR (k_cat/K_M = 1.89 × 10⁷ M^?1 sec^?1) relative to all other enteropeptidase variants reported to date. BPTI inhibition of Y174R was significantly decreased. Kinetic data demonstrate the important contribution of the positively charged residue 96 to extended substrate specificity in human enteropeptidase. Modeling shows the importance of the charge–charge interactions in the extended substrate binding pocket.