Embedding Media for 1-2 Micron Sectioning. 2. Hydroxyethyl Methacrylate Combined with 2-Butoxyethanol

A hydroxyethyl methacrylate monomer medium incorporating 2-butoxyethanol requires 2 stock solutions for embedding. Solution A: 80 ml of hydroxyethyl methacrylate (Rohm and Haas Co., Philadelphia, Pa.) is mixed well with 16 ml of 2-butoxyethanol; 0.27 gm of benzoyl peroxide, the catalyst, is added and permitted to dissolve. Heating to 40-50 C may be used to accelerate its solution. Solution B: polyethylene glycol 200 or 400, 15 parts, and N,N-dimethylaniline, 1 part, are mixed thoroughly. Tissues are dehydrated in the customary manner to absolute ethanol or other comparable dehydrant, infiltrated completely with A, then cast in a mixture consisting of 42 parts of A well mixed with 1 part of B. Polymerizaion occurs in 4-7 hr. In a water bath at 20 C the time required was about 7 hr; at 28 C, 4 hr. This medium is based on the author's water-polyethylene glycol-hydroxyethyl methacrylate monomer medium (Stain Techn., 42: 119-23, 1967).     

Methyl Green-Pyronin for Staining Autoradiographs of Hydroxyethyl Methacrylate-Embedded Lymphoid Tissue

Cells in the spleen in DNA-synthesis were labelled with tritiated thymidine. Tissue was fixed for 12 hr in 10% neutral formalin, washed for 4 hr in tap water and dehydrated through 70% and absolute ethanol. The tissue blocks were infiltrated overnight with a mixture consisting of glycol methacrylate, 80 ml; polyethylene glycol 400, 12 ml; and benzoyl peroxide, 0.27 gm. Specimens were cast in BEEM capsules with the final embedding medium consisting of 42 parts of the infiltration medium and 1 part of an acceleration mixture. This mixture consisted of N,N-dimethylaniline, 1 part and polyethylene glycol 400, 15 parts. The blocks hardened in 30 min and were sectioned with an ultramicrotome fitted with glass knives. Sections were coated with Ilford K5 liquid emulsion and exposed for 2 wk. Methyl green-pyronin staining of autoradiographs was carried out at pH 4.1 in acetate buffer containing 0.5% methyl green (Allied Chemicals) and 0.2% pyronin GS (Chroma). Staining was for 30-60 min, after which sections were washed for 1 min in water, blotted, allowed to dry, and mounted in Canada balsm. The procedure resulted in good quality autoradiographs in which the degree of basophilia of labelled cells could be assessed.     

A One-Solution Triacid General Stain Which Differentiates Oxygenated from Non-Oxygenated Red Blood Corpuscles

Tissues from representative mammals, amphibia and invertebrates were fixed for 5-24 hr in either an aqueous solution of 8% p-toluene sulfonic acid (PTSA) or in 10% formalin to which 5 gm PTSA/100 ml had been added, and processed through embedding in polyethylene glycol 400 distearate in the usual manner. Sections cut at 4-6 μ were floated on 0.2% gelatin containing 1.25% formalin, and spread and dried on slides at a temperature not exceeding 25 C. Wax was removed with xylene, and the sections brought to water through ethanol as usual. The working staining solution was made from three stock solutions: A. Chlorantine fast blue 2RLL, 0.5%; B. Cibacron turquoise blue G-E, 0.5%; C. Procion red M-P, 0.5%—each of which was dissolved in 98.5 ml of distilled water to which 0.5 ml of glacial acetic acid and 0.5 ml of propylene glycol monophenyl ether (a fungicide) had been added. For use, the three solutions were mixed in the proportions: A, 3; B, 4; and C, 3 volumes. Staining time was uncritical, 10-30 min usually sufficing for 6 μ, sections. The chief feature of the staining is the differentiation of oxygenated and nonoxygenated red blood corpuscles, in reds and blues respectively. Connective tissue stained blue or blue-green and mucin, green. Nuclei and cytoplasm stain according to their condition at the time of fixation. The mixed stain keeps well, remaining active after 2 yr of storage.     

Serial Sections of Cooked Rice Embedded in Carbowax

Serial sections of cooked rice kernels may be obtained by following either of two dehydration schedules and embedding in Carbowax. In the first schedule the cooked, rinsed and drained kernels are immersed several days in a nonaqueous fixative composed of: isopropyl alcohol, 10 ml; propionic acid, 30 ml; acetone, 10 ml; methylal, 40 ml; dioxane, 30 ml; and propylene glycol, 30 ml (Newcomer's, modified), followed by 7 or 8 days in equal parts of propylene glycol, dioxane and glycerol (changed once), and 4 days on a warming table in the same mixture with 5% Carbowax added. The dehydrated kernels are then infiltrated 4-24 hr with a Carbowax embedding mixture. In the second schedule they are immersed several days in an aqueous solution consisting of: propylene glycol, 12.5 ml; polyethylene glycol 400, 12.5 ml; either with 75 ml of water containing 0.1% thymol, or with a mixture of water, 65 ml; formalin, 10 ml; CaCl₂, 1 gm; and CdCl₂, 1 gm; followed by 3 or 4 days in 50% propylene glycol, and 3 or 4 days on a warming table in 80% propylene glycol with 5% Carbowax added. Infiltration is as above. The composition of the embedding mixture is varied according to the temperature and humidity likely to prevail during sectioning. The texture of the wax may be improved by adding small amounts of gum arabic, spermaceti, and glycerol. Serial sections 3-10 μ thick are placed on clean dry slides, and adhesive dropped at the edges of the ribbon of Carbowax until it is dissolved. The adhesive consists of water-glass (concentrated solution), 1 ml; concentrated ammonia, 1 ml; Carbowax, 5 gm; and water, 98 ml. After the slides are dry they are stored, or immersed 10 min in chloroform, collodionized, and passed to staining solutions. Atmospheric conditions affect not only the Carbowax, but also the response to reagents of cooked rice and of sections.     

Carbowax for Embedding and Serial Sectioning of Botanical Material

Plant material infiltrated with gradually increasing concentrations of Carbowax 400, followed by Carbowax 1540 and finally a 19:1 embedding mixture of Carbowax 1540 and 4000 showed minimum shrinkage. Quantitative measurements of shrinkage in tissue of potato tubers gave the following amounts: fixation and washing, about 4%; transfer from water directly to 70% Carbowax 400, 5176; from water through a graded series (5, 10, 15, 20, 30, 40, 50 and 60% Carbowax) to 70%, only 2.5% shrinkage; with an additional 1.5% occurring in transition to the embedding mixture. Dry ribbons are placed on adhesive-coated (gelatin, 5 gm; water, 120 ml; glycerol, 40 ml; phenol, 2 gm) slides in a humidity chamber. In 10-15 min enough moisture is absorbed by the ribbon to float the sections out gently and bring them in contact with the adhesive. Slides are then dried 5-10 min at room temperature. To remove minor wrinkles, the sections are subsequently flooded with water, then redried 12-24 hr; after which, they are ready for staining.     

A Plastic Embedding Medium for Thin Sectioning in Light Microscopy

Tissue blocks with surface areas up to 2 cm² can be sectioned at 1 or 2 μ after embedding in a medium consisting of: methyl methacrylate, 27 ml; polyethylene glycol distearate MW 1540, 6 gm; dibutyl phthalate, 4 ml; and Plexiglas molding powder A-100, 9 gm (added last). The methacrylate mixture is polymerized at 50° C by benzoyl peroxide, 0.8 gm/ 100 ml of methacrylate. The polymerized matrix is transparent and the blocks can be cut on a rotary microtome with a steel knife. The plastic can be removed from sections with acetone prior to staining. Artifacts caused by embedding and sectioning are negligible     

Staining Mitochondria With Hematoxylin After Formalin-Sublimate Fixation; A Rapid Method

Mitochondria were stained in liver, kidney, pancreas, adrenal and intestinal mucosa of rat and mouse. Tissues 1 mm thick, were fixed in a mixture of saturated aqueous HgCl₂, 90 ml; formalin (37-38% HCHO), 10 ml, at room temperature (25°C) for 1 hr. Deparaffinized sections 3-4μ thick were treated with Lugol's iodine (U.S.P.) followed by Na₂S₂O₃ (5%), rinsed in water and the ribonucleic acid removed by any of the following procedures: 0.2 M McIlavaine's buffer, pH 7.0, 2 hr, or 0.2 M phosphate buffer, pH 7.0, 2 hr at 37°C; 0.1% aqueous ribonuclease, 2 hr at 37°C; 5% aqueous trichloracetic acid overnight at 37°C; or 1% KOH at room temperature for 1 hr. After washing in water, sections were treated with a saturated solution of ferric ammonium alum at 37°C for 8-12 hr and colored by Regaud's ripened hematoxylin for 18 hr. They were then differentiated in 1% ferric ammonium alum solution while under microscopic observation.     

以松毛虫为基质培养的冬虫夏草菌丝体中多糖的提取研究

研究了不同方法对冬虫夏草发酵菌丝体（以枯叶蛾科昆虫马尾松毛虫为基质发酵所得）中多糖提取的影响。结果表明,采用微波辅助水提法所得多糖的产率最高,影响提取的关键因素为液料比、微波提取时间、微波功率;采用Box-Behnken设计及响应面分析法对这3个因素进行优化,并通过回归拟合,建立了预测虫草多糖提取的多项式模型Y=6.87+0.058A+0.085B+0.075C+0.032AB+0.046AC+0.069BC-0.16A²-0.37B²-0.11C²。经响应面最优化分析,获得冬虫夏草发酵菌丝体中多糖的最优提取工艺参数为：液料比（mL/g）6.3:1、微波功率520W、微波提取时间326s,此工艺提取验证后的提取率达到6.76%。     

Synthesis and characterization of SrCu2(O2CR)3(bdmap)3 and Bi2(O2CCH3)4(bdmap)2(H2O) (R = CH3, CF3; bdmap = 1,3-bis(dimethylamino)-2-propanolato)

New mixed metal complexes SrCu₂(O₂CR)₃(bdmap)₃ (R = CF₃ (1a), CH₃ (1b)) and a new dinuclear bismuth complex Bi₂(O₂CCH₃)₄(bdmap)₂(H₂O) (2) have been synthesized. Their crystal structures have been determined by single-crystal X-ray diffraction analyses. Thermal decomposition behaviors of these complexes have been examined by TGA and X-ray powder diffraction analyses. While compound 1a decomposes to SrF₂ and CuO at about 380°C, compound 1b decomposes to the corresponding oxides above 800°C. Compound 2 decomposes cleanly to Bi₂O₃ at 330°C. The magnetism of 1a was examined by the measurement of susceptibility from 5–300 K. Theoretical fitting for the susceptibility data revealed that 1a is an antiferromagnetically coupled system with g = 2.012(7), −2J = 34.0(8) cm⁻¹. Crystal data for 1a: C₂₇H₅₁N₆O₉F₉Cu₂Sr/THF, monoclinic space group P2₁/m, A = 10.708(6), B = 15.20(1), C = 15.404(7) Å, β = 107.94(4)°, V = 2386(2) ų, Z = 2; for 1b: C₂₇H₆₀N₆O₉Cu₂Sr/THF, orthorhombic space group Pbcn, A = 19.164(9), B = 26.829(8), C = 17.240(9) Å, V = 8864(5) ų, Z = 8; for 2: C₂₂H₄₈O₁₁N₄Bi₂, monoclinic space group P2₁/c, A = 17.614(9), B = 10.741(3), C = 18.910(7) Å, β = 109.99(3)°, V = 3362(2) ų, Z = 4.     

基于基因组数据解析大球盖菇交配型系统

大球盖菇Stropharia rugosoannulata是一种具有较强木质纤维素降解能力以及高营养的重要食用菌。此菌属于四极性异宗结合担子菌,但是交配型位点结构仍未被解析。本研究利用基因组数据通过生物信息学方法进行大球盖菇的A和B交配型位点解析,并与其他大型真菌进行比较。结果显示大球盖菇的A交配型位点包含了一对保守的HD1和HD2基因,位点上下游基因的共线性较高,与Galerina patagonica和砖红韧黑伞Hypholoma sublateritium相似度最高,A位点结构上也较为保守,在上下游具有保守的MIP、Sec61蛋白、甘氨酸脱氢酶和β侧翼蛋白。B位点包含5个信息素受体和3个信息素前体基因,与其他真菌相比较发现,B位点及上下游基因的共线性较差,表明在不同的真菌中B位点变异性较大。本研究所获得的结果将有助于诠释大球盖菇交配型位点结构,为今后的遗传育种提供了理论依据。     

中国东北地区三种蜜环菌的生物学特性及奥氏蜜环菌人工培养

蜜环菌属Armillaria真菌具有较高的食药用价值。由于蜜环菌的生长发育过程较复杂,还未完全实现商业化栽培,野生资源的供应受到季节性和地域性的影响。本研究以采自东北地区蜜环菌属的3个菌株为研究对象,通过培养物的形态特征及分子标记确定菌株JG19016为奥氏蜜环菌A. ostoyae,菌株JG19017为高卢蜜环菌A. gallica,菌株JG19018为中国蜜环菌生物种C。奥氏蜜环菌JG19016最适生长温度为25 ℃,高卢蜜环菌JG19017的最适生长温度为22 ℃,中国蜜环菌生物种C JG19018则在22-25 ℃时菌丝生长速度最快;3个菌株最适pH为5-6。奥氏蜜环菌JG19016对葡萄糖和蔗糖利用率较好,高卢蜜环菌JG19017对葡萄糖利用率较好,中国蜜环菌生物种C JG19018对葡萄糖和淀粉利用率较好;蛋白胨对3个菌株促进作用最强,为最适氮源。培养基中加入VB₁,对3个菌株的菌丝生长均有明显的促进作用。奥氏蜜环菌JG19016菌丝生长的最优培养基配方为：葡萄糖20 g,蛋白胨3 g,磷酸二氢钾2 g,硫酸镁1.5 g,VB₁ 10 mg,琼脂20 g,水1 L。在木屑基质中培养,其配方的最优碳氮比为38:1,最佳木屑粗细比为3:1以上。出菇条件探索结果显示,菌丝及菌索长满菌袋(17 mm×33 mm×5 mm丝聚乙烯袋)需要50-60 d,之后在18 ℃、60%湿度和12 h散射光的环境中,10 d左右可观察到原基产生。增加菇房湿度到90%-95%,2-3 d可观察到1-3 cm的幼子实体,7 d左右菌柄和菌盖完全分化,10 d左右观察到菌盖展开。     

Carbowax for Embedding and Serial Sectioning of Botanical Material

Plant material infiltrated with gradually increasing concentrations of Carbowax 400, followed by Carbowax 1540 and finally a 19:1 embedding mixture of Carbowax 1540 and 4000 showed minimum shrinkage. Quantitative measurements of shrinkage in tissue of potato tubers gave the following amounts: fixation and washing, about 4%; transfer from water directly to 70% Carbowax 400, 5176; from water through a graded series (5, 10, 15, 20, 30, 40, 50 and 60% Carbowax) to 70%, only 2.5% shrinkage; with an additional 1.5% occurring in transition to the embedding mixture. Dry ribbons are placed on adhesive-coated (gelatin, 5 gm; water, 120 ml; glycerol, 40 ml; phenol, 2 gm) slides in a humidity chamber. In 10-15 min enough moisture is absorbed by the ribbon to float the sections out gently and bring them in contact with the adhesive. Slides are then dried 5-10 min at room temperature. To remove minor wrinkles, the sections are subsequently flooded with water, then redried 12-24 hr; after which, they are ready for staining.     

Use of Hot Formaldehyde Fixative in Processing Plant-Parasitic Nematodes for Electron Microscopy

A preparative technique is formulated for processing plant-parasitic nematodes of the order Tylenchida for electron microscopy. A population of Dolichodorus heterocephalus is used as test objects. One and a half grams of paraformaldehyde are dissolved in 25 ml of water at 60 C. Five drops of 1 N sodium hydroxide are added to clear the solution, which is then cooled to room temperature. Two and a half milliliters of 25% glutaraldehyde are added with 23 ml 0.1 M phosphate buffer, pH 7.3, and 0.2 M with respect to sucrose. The final solution contains 3% formaldehyde and 1% glutaraldehyde and is pH 7.2. It is heated to 70 C, poured over specimens, and allowed to cool to 4 C in 2 hr. The nematodes are then incised in a fixative containing 2% glutaraldehyde and 5% dimethyl sulfoxide at 4 C for 16-24 br. Five milliliters of 25% glutaraldehyde and 2.5 ml of dimethyl sulfoxide are combined in 17.5 ml of water. Twenty-five milliliters of phosphate buffer (supplemented as above) are added. The final pH is 7.2. The glutaraldehyde, aided by dimethyl sulfoxide, uniformly and permanently fixes the nematode tissues. The specimens are embedded in agar. Following a 30-min buffer wash (4 C) they are postfixed in buffered 2% osmium tetroside for 2 hr at room temperature, washed, and dehydrated through an ethanol series and two acetone baths. Dehydration includes a 2-hr stop in 75% ethanol containing 2% uranyl acetate. After embedding in Spurr's epoxy resin, specimens are sectioned and poststained in 0.5% aqueous uranyl acetate for 6 min and saturated aqueous lead citrate 3-4 min.

This technique reduces killing time to less than 2 sec, straightens specimens for easier orientation, and eliminates the typically high internal pressure of nematodes which causes displacement of internal structures observed with other fixation techniques.     

Counterstaining Golgi-Cox Impregnations with Luxol Fast Blue as a Myelin Stain

Immerse pieces of brain tissue 4 wk in solutions A and B, mixed just before use: A. K₂Cr₂O₇, 1 gm; HgCl₂, 1 gm; boiling distilled water, 85 ml. Boil A for 15 min, cool to 2 C and add: B. K₂CrO₄, 0.8 gm; Na₂WO₄, 0.5 gm; distilled water, 20 ml. Rinse in water and immerse 24 hr in LiOH, 0.5 gm; KNO₃, 15 gm; distilled water, 100 ml. Wash 24 hr in several changes of 0.2% acetic acid and then for 2 hr in tap water. Dehydrate and embed in celloidin. Process a 60 μ section through 70 and 95% ethanol, a 3:1 mixture of absolute ethanol and chloroform, and toluene. Immerse it for 5 min in a solution containing methyl benzoate, 25 ml; benzyl alcohol, 100 ml; chloroform, 75 ml. Orient the section on a chemically clean slide and let air-dry 5-10 min. Process through toluene, 3:1 ethanol-chloroform and 95% ethanol. Place the section for 5-60 min at 60 C in a solution made up of: Luxol fast blue G (Matheson, Coleman and Bell), 1 gm; 95% ethanol, 1000 ml; 10% acetic acid, 5 ml. Hydrate to water and immerse in 0.05% Li₂CO₃ for 3-4 min. Differentiate in 70% ethanol and place in water. Immerse for 5-15 min in a mixture of two solutions: A. cresylechtviolet (Otto C. Watzka, Montreal), 2 gm; 1 M acetic acid, 185 ml; B. 1 M sodium acetate, 15 ml; distilled water, 400 ml; absolute ethanol, 200 ml. Dehydrate to 3:1 ethanol-chloroform. Clear in toluene and apply a coverslip. The technique produces fast Golgi-Cox impregnated neurons against a background of counterstained myelinated fibers. Patterns of the myelinated fibers can be used to localize impregnated neurons.     

Pyrazolonato complexes of lead. Crystal structures of bis(1-phenyl-3-methyl-4-acetyl pyrazolonato)lead(II) and bis(1-phenyl-3-methyl-4-butanoylpyrazolonato)lead(II)

The structures of the complexes [PbL₂], L = 1-phenyl-3-methyl-4-acylpyrazolonato, RCOC₁₀H₈N₂O, R = Me (2) or Pr (3), have been determined by X-ray diffraction studies. Compound 2 is monoclinic, space group P2₁, A = 11.285(4), B = 14.727(4), C = 20.749(5) Å, β = 95.83(3)°, R = 0.039 for 4486 reflections, and 3 is monoclinic, space group C2/c, A = 27.528(11), B = 7.245(11), C = 14.264(7) Å, β = 113.6(3)°, R = 0.021 for 2118 reflections. There are three different lead environments in 2 but only one in 3. In each case the lead atom makes four strong bonds to oxygen and two weaker bonds to either oxygen or nitrogen in adjacent molecules.     

Rapid low molecular weight polyethylene glycol embedding protocol for immunocytochemistry

We describe an alternative polyethylene glycol (PEG) embedding procedure which utilizes PEG 200 for dehydration and PEG 600 for infiltration and embedding of perfusion-fixed rat liver. PEG 600 has a melting point of 22 degrees C, enabling infiltration of fixed tissue to be performed at room temperature. Sections (2 microM) cut in a cryostat at -20 degrees C and immobilized in agarose were readily labeled by immunoperoxidase protocols with monoclonal antibodies to hepatocyte membrane antigens. Subsequent examination by light microscopy or by electron microscopy after re-embedding in resin and ultra-thin sectioning showed excellent preservation of morphology, with minimal impairment of antigenicity.     

Development of new formulations of Bacillus subtilis for management of tomato damping-off caused by Pythium aphanidermatum

Formulations of a strain of Bacillus subtilis AUBS-1 inhibitory to the growth of the damping-off pathogen, Pythium aphanidermatum, were developed for seed treatment. The formulations included a talc-based powder, lignite-based powder, lignite+fly ash-based powder, wettable powder, bentonite-paste, polyethylene glycol (PEG) paste and a water-dispersible tablet. Formulations were stored at room temperature for 2 years and frequently sampled to test their shelf life. Populations of bacteria in the formulations were stable for up to 2 years storage at room temperature (28°C). Viability of propagules in lignite, lignite+fly ash, bentonite paste, wettable powder and water dispersible tablet formulations was 100% for up to 1 year. However, the viability of propagules was significantly reduced in talc, wettable powder, PEG paste and tablet formulations beyond 1 year of storage. Seed treatment of tomato with these formulations resulted in effective control of damping-off caused by P. aphanidermatum, and also enhanced plant biomass under glasshouse and field conditions. Active rhizosphere colonization by the bacterium was observed on tomato plants grown from seeds treated with the above formulations.     

Serial Sectioning Techniques for A Modified LKB Historesin

A glycol methacrylate-based plastic that is capable of producing; serial sections has been introduced by LKB. This plastic, provided in the LKB 2218-500 Historesin Embedding Kit, has been tested in our laboratory for its ribbon forming capacity. Various block sizes, concentrations of the softening agent polyethylene glycol 400 (PEG), and tissue types have been examined to determine the optimal conditions for ribbon formation. Although unmodified LKB Historesin is capable of forming ribbons, these ribbons often break. The addition of PEG to the embedding solution enhances ribbon formation. When sectioning with glass knives the best results are achieved with the addition of 0.2 ml of PEG/5.0 ml of embedding medium. A conventional AO rotary microtome can be used to produce ribbons if, in addition to the added PEG (optimal concentration 0.25-0.30 per 5 ml of embedding medium) a thin layer of dental wax is added to the upper and lower surfaces of the block. Ribbons form more easily on microtomes, such as the LKB Historange, that have a retractable specimen arm. If serial sections are to be produced it is very important that the upper and lower faces of blocks be parallel.     

Use of Gallocyanin as a Myelin Stain for Brain and Spinal Cord

Tissue fixed in 10% formalin, formol saline, CaCO₃ or phosphate buffer neutralized formalin, Baker's formol calcium, Cajal's formol ammonium bromide, formalin-95% ethanol 1:9, formalin-methanol 1:9, Lillie's methanol-chloroform or Salthouse's formol cetyltrimethylammonium bromide was dehydrated and embedded in paraffin. Sections were attached to slides with either albumen or gelatine adhesive and processed throughout at room temperature of 22-25 C. Mordanting 30-60 min in 1% iron alum was followed by a 10 min wash in 4 changes of distilled water. Myelin was stained in a gallocyanin self-differentiating solution for 1-2.5 hr; thick sections requiring the longer time. The staining solution (pH approximately 7.4) consisted of Na₂CO₃, 90 mg; distilled water, 100 ml; gallocyanin, 250 mg; and ethanol, 5 ml. The ethanol was added to this mixture last, and after the other ingredients had been boiled and then cooled to room temperature. After a staining and thorough washing, Nissl granules were stained for 5-10 min in a solution consisting of: 0.1 M acetic acid, 60 ml; 0.1 M sodium acetate, 40 ml; methyl green, 500 mg. Washing, dehydration, clearing and mounting completed the process. Myelin sheaths were stained dark violet; neuronal nuclei, light green with dark granules of chromatin; nucleoli of motor cells and erythrocytes, dark violet; cytoplasm, green with dark green Nissl granules. The simple and reliable method can be adapted easily for use with automatic tissue processors.     

Serial sectioning techniques for a modified LKB Historesin

A glycol methacrylate-based plastic that is capable of producing serial sections has been introduced by LKB. This plastic, provided in the LKB 2218-500 Historesin Embedding Kit, has been tested in our laboratory for its ribbon forming capacity. Various block sizes, concentrations of the softening agent polyethylene glycol 400 (PEG), and tissue types have been examined to determine the optimal conditions for ribbon formation. Although unmodified LKB Historesin is capable of forming ribbons, these ribbons often break. The addition of PEG to the embedding solution enhances ribbon formation. When sectioning with glass knives the best results are achieved with the addition of 0.2 ml of PEG/5.0 ml of embedding medium. A conventional AO rotary microtome can be used to produce ribbons if, in addition to the added PEG (optimal concentration 0.25-0.30 per 5 ml of embedding medium) a thin layer of dental wax is added to the upper and lower surfaces of the block. Ribbons form more easily on microtomes, such as the LKB Historange, that have a retractable specimen arm. If serial sections are to be produced it is very important that the upper and lower faces of blocks be parallel.