Domains II and III of Bacillus thuringiensis Cry1Ab toxin remain exposed to the solvent after insertion of part of domain I into the membrane

Bacillus thuringiensis produces insecticidal proteins named Cry toxins, that are used commercially for the control of economical important insect pests. These are pore-forming toxins that interact with different receptors in the insect gut, forming pores in the apical membrane causing cell burst and insect death. Elucidation of the structure of the membrane-inserted toxin is important to fully understand its mechanism of action. One hypothesis proposed that the hairpin of α-helices 4-5 of domain I inserts into the phospholipid bilayer, whereas the rest of helices of domain I are spread on the membrane surface in an umbrella-like conformation. However, a second hypothesis proposed that the three domains of the Cry toxin insert into the bilayer without major conformational changes. In this work we constructed single Cys Cry1Ab mutants that remain active against Manduca sexta larvae and labeled them with different fluorescent probes that have different responses to solvent polarity. Different soluble quenchers as well as a membrane-bound quencher were used to compare the properties of the soluble and brush border membrane-inserted forms of Cry1Ab toxin. The fluorescence and quenching analysis presented here, revealed that domains II and III of the toxin remain in the surface of the membrane and only a discrete region of domain I is inserted into the lipid bilayer, supporting the umbrella model of toxin insertion.     

Oligomerization triggers binding of a Bacillus thuringiensis Cry1Ab pore-forming toxin to aminopeptidase N receptor leading to insertion into membrane microdomains

Bacillus thuringiensis Cry1A toxins, in contrast to other pore-forming toxins, bind two putative receptor molecules, aminopeptidase N (APN) and cadherin-like proteins. Here we show that Cry1Ab toxin binding to these two receptors depends on the toxins' oligomeric structure. Toxin monomeric structure binds to Bt-R1, a cadherin-like protein, that induces proteolytic processing and oligomerization of the toxin (Gomez, I., Sanchez, J., Miranda, R., Bravo A., Soberon, M., FEBS Lett. (2002) 513, 242-246), while the oligomeric structure binds APN, which drives the toxin into the detergent-resistant membrane (DRM) microdomains causing pore formation. Cleavage of APN by phospholipase C prevented the location of Cry1Ab oligomer and Bt-R1 in the DRM microdomains and also attenuates toxin insertion into membranes despite the presence of Bt-R1. Immunoprecipitation experiments demonstrated that initial Cry1Ab toxin binding to Bt-R1 is followed by binding to APN. Also, immunoprecipitation of Cry1Ab toxin-binding proteins using pure oligomeric or monomeric structures showed that APN was more efficiently detected in samples immunoprecipitated with the oligomeric structure, while Bt-R1 was preferentially detected in samples immunoprecipitated with the monomeric Cry1Ab. These data agrees with the 200-fold higher apparent affinity of the oligomer than that of the monomer to an APN enriched protein extract. Our data suggest that the two receptors interact sequentially with different structural species of the toxin leading to its efficient membrane insertion.     

Resistance of sugarcane borer to Bacillus thuringiensis Cry1Ab toxin

The sugarcane borer, Diatraea saccharalis (F.) (Lepidoptera: Crambidae), strain (F52‐3‐R) was developed from F₃ survivors of a single‐pair mating on commercial Cry1Ab Bacillus thuringiensis (Bt) corn plants in the greenhouse. The susceptibility of a Bt‐susceptible and the F52‐3‐R strain of D. saccharalis to trypsin‐activated Cry1Ab toxin was determined in a laboratory bioassay. Neonate‐stage larvae were fed a meridic diet incorporating Cry1Ab toxin at a concentration range of 0.0625 to 32 µg g^?1. Larval mortality, larval weight, and number of surviving larvae that did not gain significant weight (<0.1 mg per larva) were recorded on the 7th day after inoculation. The F52‐3‐R strain demonstrated a significant level of resistance to the activated Cry1Ab toxin. Larval mortality of the Bt‐susceptible strain increased in response to higher concentrations of Cry1Ab toxin, exceeding 75% at 32 µg g^?1, whereas mortality of the F52‐3‐R strain was below 8% across all Cry1Ab concentrations. Using a measure of practical mortality (larvae either died or gained no weight), the median lethal concentration (LC₅₀) of the F52‐3‐R strain was 102‐fold greater than that of the Bt‐susceptible insects. Larval growth of both Bt‐susceptible and F52‐3‐R strains was inhibited on Cry1Ab‐treated diet, but the inhibition of the F52‐3‐R strain was significantly less than that of the Bt‐susceptible insects. These results confirm that the survival of the F52‐3‐R strain on commercial Bt corn plants was related to Cry1Ab protein resistance and suggest that this strain may have considerable value in studying resistance management strategies for Bt corn.     

Protease inhibitors fail to prevent pore formation by the activated Bacillus thuringiensis toxin Cry1Aa in insect brush border membrane vesicles

To investigate whether membrane proteases are involved in the activity of Bacillus thuringiensis insecticidal toxins, the rate of pore formation by trypsin-activated Cry1Aa was monitored in the presence of a variety of protease inhibitors with Manduca sexta midgut brush border membrane vesicles and by a light-scattering assay. Most of the inhibitors tested had no effect on the pore-forming ability of the toxin. However, phenylmethylsulfonyl fluoride, a serine protease inhibitor, promoted pore formation, although this stimulation only occurred at higher inhibitor concentrations than those commonly used to inhibit proteases. Among the metalloprotease inhibitors, o-phenanthroline had no significant effect; EDTA and EGTA reduced the rate of pore formation at pH 10.5, but only EDTA was inhibitory at pH 7.5. Neither chelator affected the properties of the pores already formed after incubation of the vesicles with the toxin. Taken together, these results indicate that, once activated, Cry1Aa is completely functional and does not require further proteolysis. The effect of EDTA and EGTA is probably better explained by their ability to chelate divalent cations that could be necessary for the stability of the toxin's receptors or involved elsewhere in the mechanism of pore formation.     

Binding sites for Bacillus thuringiensis Cry2Ae toxin on heliothine brush border membrane vesicles are not shared with Cry1A, Cry1F, or Vip3A toxin

The use of combinations of Bacillus thuringiensis (Bt) toxins with diverse modes of action for insect pest control has been proposed as the most efficient strategy to increase target range and delay the onset of insect resistance. Considering that most cases of cross-resistance to Bt toxins in laboratory-selected insect colonies are due to alteration of common toxin binding sites, independent modes of action can be defined as toxins sharing limited or no binding sites in brush border membrane vesicles (BBMV) prepared from the target insect larvae. In this paper, we report on the specific binding of Cry2Ae toxin to binding sites on BBMV from larvae of the three most commercially relevant heliothine species, Heliothis virescens, Helicoverpa zea, and Helicoverpa armigera. Using chromatographic purification under reducing conditions before labeling, we detected specific binding of radiolabeled Cry2Ae, which allowed us to perform competition assays using Cry1Ab, Cry1Ac, Cry1Fa, Vip3A, Cry2Ae, and Cry2Ab toxins as competitors. In these assays, Cry2Ae binding sites were shared with Cry2Ab but not with the tested Cry1 or Vip3A toxins. Our data support the use of Cry2Ae toxin in combination with Cry1 or Vip3A toxins in strategies to increase target range and delay the onset of heliothine resistance.     

A membrane associated metalloprotease cleaves Cry3Aa Bacillus thuringiensis toxin reducing pore formation in Colorado potato beetle brush border membrane vesicles

Insect proteases are implicated in Bacillus thuringiensis insecticidal proteins mode of action determining toxin specificity and sensitivity. Few data are available on the involvement of proteases in the later steps of toxicity such as protease interaction with toxin-receptor complexes and the pore formation process. In this study, a Colorado potato beetle (CPB) midgut membrane metalloprotease was found to be involved in the proteolytic processing of Cry3Aa. Interaction of Cry3Aa with BBMV membrane proteases resulted in a distinct pattern of proteolysis. Cleavage was demonstrated to occur in protease accessible regions of domain III and was specifically inhibited by the metalloprotease inhibitors 1,10-phenanthroline and acetohydroxamic acid. Proteolytic inhibition by a peptide representing a segment of proteolysis in domain III and the metalloprotease inhibitor acetohydroxamic acid correlated with increased pore formation, evidencing that Cry3Aa is a specific target of a CPB membrane metalloprotease that degrades potentially active toxin.     

Binding analyses of Bacillus thuringiensis Cry delta-endotoxins using brush border membrane vesicles of Ostrinia nubilalis

Transgenic corn expressing the Bacillus thuringiensis Cry1Ab gene is highly insecticidal to Ostrinia nubilalis (European corn borer) larvae. We ascertained whether Cry1F, Cry9C, or Cry9E recognizes the Cry1Ab binding site on the O. nubilalis brush border by three approaches. An optical biosensor technology based on surface plasmon resonance measured binding of brush border membrane vesicles (BBMV) injected over a surface of immobilized Cry toxin. Preincubation with Cry1Ab reduced BBMV binding to immobilized Cry1Ab, whereas preincubation with Cry1F, Cry9C, or Cry9E did not inhibit BBMV binding. BBMV binding to a Cry1F-coated surface was reduced when vesicles were preincubated in Cry1F or Cry1Ab but not Cry9C or Cry9E. A radioligand approach measured 125I-Cry1Ab toxin binding to BBMV in the presence of homologous (Cry1Ab) and heterologous (Cry1Ac, Cry1F, Cry9C, or Cry9E) toxins. Unlabeled Cry1Ac effectively competed for 125I-Cry1Ab binding in a manner comparable to Cry1Ab itself. Unlabeled Cry9C and Cry9E toxins did not inhibit (125)I-Cry1Ab binding to BBMV. Cry1F inhibited (125)I-Cry1Ab binding at concentrations greater than 500 nM. Cry1F had low-level affinity for the Cry1Ab binding site. Ligand blot analysis identified Cry1Ab, Cry1Ac, and Cry1F binding proteins in BBMV. The major Cry1Ab signals on ligand blots were at 145 kDa and 154 kDa, but a strong signal was present at 220 kDa and a weak signal was present at 167 kDa. Cry1Ac and Cry1F binding proteins were detected at 220 and 154 kDa. Anti-Manduca sexta aminopeptidase serum recognized proteins of 145, 154, and 167 kDa, and anti-cadherin serum recognized the 220 kDa protein. We speculate that isoforms of aminopeptidase and cadherin in the brush border membrane serve as Cry1Ab, Cry1Ac, and Cry1F binding proteins.     

Role of tryptophan residues in toxicity of Cry1Ab toxin from Bacillus thuringiensis

Bacillus thuringiensis produces insecticidal proteins (Cry protoxins) during the sporulation phase as parasporal crystals. During intoxication, the Cry protoxins must change from insoluble crystals into membrane-inserted toxins which form ionic pores. The structural changes of Cry toxins during oligomerization and insertion into the membrane are still unknown. The Cry1Ab toxin has nine tryptophan residues; seven are located in domain I, the pore-forming domain, and two are located in domain II, which is involved in receptor recognition. Eight Trp residues are highly conserved within the whole family of three-domain Cry proteins, suggesting an essential role for these residues in the structural folding and function of the toxin. In this work, we analyzed the role of Trp residues in the structure and function of Cry1Ab toxin. We replaced the Trp residues with phenylalanine or cysteine using site-directed mutagenesis. Our results show that W65 and W316 are important for insecticidal activity of the toxin since their replacement by Phe reduced the toxicity against Manduca sexta. The presence of hydrophobic residue is important at positions 117, 219, 226, and 455 since replacement by Cys affected either the crystal formation or the insecticidal activity of the toxin in contrast to replacement by Phe in these positions. Additionally, some mutants in positions 219, 316, and 455 were also affected in binding to brush border membrane vesicles (BBMV). This is the first report that studies the role of Trp residues in the activity of Cry toxins.     

Study of the irreversible binding of Bacillus thuringiensis Cry1Aa to brush border membrane vesicles from Bombyx mori midgut

The binding of Bacillus thuringiensis δ-endotoxin to brush border membrane vesicles (BBMVs) from the target insect larval midgut comprises with not only a reversible but also an irreversible component. The irreversible binding of δ-endotoxin is thought to be a pathologically important factor. Here, we studied the irreversible binding of Cry1Aa to the BBMVs of Bombyx mori. The ¹²⁵I-labeled Cry1Aa bound to the solubilized brush border membrane (BBM) through rapid dissociation only, unlike the binding to BBMVs, indicating that the toxin bound to the solubilized BBM through only a reversible process. Low-temperature sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis revealed that the toxin bound irreversibly to BBMVs formed an oligomer of 220 kDa, whereas that bound reversibly to the solubilized BBM did not oligomeraize. When the ¹²⁵I-labeled Cry1Aa bound irreversibly to the BBMVs was digested by proteinase K, approximately 40% of the toxin observed to be resistant to proteinase K. The molecular mass of the toxin resistant to proteinase K was 60 kDa, suggesting that the irreversible binding comprise two forms. These results support the notion that the irreversible binding of the toxin to BBMVs is due to the insertion of the toxin into the lipid bilayers and oligomerization to form channels.     

Binding of Bacillus thuringiensis Cry1A toxins to brush border membrane vesicles of midgut from Cry1Ac susceptible and resistant Plutella xylostella

Plutella xylostella strain resistant (PXR) to Bacillus thuringiensis Cry1Ac toxin was not killed at even more than 1000 μg Cry1Ac/g diet but killed by Cry1Ab at 0.5 μg/g diet. In contrast, susceptible strain (PXS) was killed by Cry1Ac at 1 μg/g diet. Cy3-labeld Cry1A(s) binding to brush border membrane vesicles (BBMV) prepared from both strains were analyzed with direct binding assay. The Kd value of Cry1Aa to both BBMV was almost identical: 213.2 and 205.8 nM, and 263.5 and 265.0 nM for Cry1Ac. The highest Kd values were in Cry1Ab which showed most effective insecticidal activity in PXS and PXR, 2126 and 2463 nM, respectively. These results clearly showed that the BBMV from PXR and PXS could equally bind to Cry1Ac. The binding between BBMV and Cy3-labeled Cry1Ac was inhibited only by anti-175 kDa cadherin-like protein (CadLP) and -252 kDa protein antisera, but not by anti-120 kDa aminopeptidase. This supports that resistance in PXR resulted from the abortion of pore formation after the binding of Cry1Ac to the BBMV. And furthermore, the importance of 175K CadLP and P252 proteins in those bindings was suggested. We briefly discuss possible mechanisms of the resistance.     

Molecular basis for Bacillus thuringiensis Cry1Ab toxin specificity: two structural determinants in the Manduca sexta Bt-R1 receptor interact with loops alpha-8 and 2 in domain II of Cy1Ab toxin

The identification of epitopes involved in Cry toxin-receptor interaction could provide insights into the molecular basis of insect specificity and for designing new toxins to overcome the potential problem of insect resistance. In previous works, we determined that the Manduca sexta Cry1A cadherin-like receptor (Bt-R(1)) interacts with Cry1A toxins through epitope (865)NITIHITDTNN(875) and by loop 2 of domain II in the toxin (Gomez, I., Miranda-Rios, J., Rudi?o-Pi?era, E., Oltean, D. I., Gill, S. S., Bravo, A., and Soberón, M. (2002) J. Biol. Chem. 277, 30137-30143.). In this work, we narrowed to 12 amino acids a previously identified Bt-R(1) 66 amino acids epitope (Dorsch, J. A., Candas, M., Griko, N. B., Maaty, W. S. A., Midbo, E. G., Vadlamudi, R. K., and Bulla, L. A., Jr. (2002) Insect Biochem. Mol. Biol. 32, 1025-1036) and identified loop alpha-8 of Cry1Ab domain II as its cognate binding epitope. Two amino acid Bt-R(1) toxin binding regions of 70 residues, one comprised of residues 831-900 containing the (865)NITIHITDTNN(875) epitope (TBR1) and the other comprised of residues 1291-1360 (TBR2) were cloned by RT-PCR and produced in Escherichia coli. Cry1A toxins bind with the two TBR regions in contrast with the nontoxic Cry3A toxin. The loop 2 synthetic peptide competed with the binding of Cry1Ab toxin to both TBR regions in contrast to the alpha-8 synthetic peptide that only competed with Cry1Ab binding to TBR2. Western blots and competition ELISA analysis showed that the Cry1Ab loop 2 RR368-9EE mutant did not show observable binding to TBR1 but still bound the TBR2 peptide. This result suggests that loop alpha-8 interacts with the TBR2 region. Competition ELISA analysis of Cry1Ab binding to the two TBR peptides revealed that the toxin binds the TBR1 region with 6-fold higher affinity than the TBR2 region. The amino acid sequence of TBR2 involved on Cry1Ab interaction was narrowed to 12 amino acids, (1331)IPLPASILTVTV(1342), by using synthetic peptides as competitors for Cry1Ab binding to Bt-R(1). Our results show that the specificity of Cry1A involves at least two structural determinants on both molecules.     

Computational tridimensional protein modeling of Cry1Ab19 toxin from Bacillus thuringiensis BtX-2

We report the computational structural simulation of the Cry1Ab19 toxin molecule from B. thuringiensis BtX-2 based on the structure of Cry1Aa1 deduced by x-ray diffraction. Validation results showed that 93.5% of modeled residues are folded in a favorable orientation with a total energy Z-score of -8.32, and the constructed model has an RMSD of only 1.13. The major differences in the presented model are longer loop lengths and shortened sheet components. The overall result supports the hierarchical three-domain structural hypothesis of Cry toxins and will help in better understanding the structural variation within the Cry toxin family along with facilitating the design of domain-swapping experiments aimed at improving the toxicity of native toxins.     

Inheritance of resistance to the Cry1Ab Bacillus thuringiensis toxin in Ostrinia nubilalis (Lepidoptera: Crambidae)

Laboratory selection with Cry1Ab, the predominant Bacillus thuringiensis (Bt) toxin in transgenic corn, Zea mays L., produced >1000-fold resistance in two laboratory strains of European corn borer, Ostrinia nubilalis (Hübner). We tested the offspring of various crosses to determine the mode of inheritance of resistance to Cry1Ab. Patterns of inheritance of resistance were similar in the two resistant strains. The progeny of reciprocal F1 crosses (resistant male x susceptible female and vice versa) responded alike in bioassays, indicating autosomal inheritance. The median lethal concentrations (LC50 values) of F1 were intermediate between the resistant and susceptible parents, indicating approximately additive inheritance. However, the dominance of resistance increased as the concentration of Cry1Ab decreased. Analysis of progeny from backcrosses (F1 x susceptible strain) suggests that resistance was controlled by more than one locus. In particular, the fit of observed to expected mortality improved as the number of putative loci increased from 1 to 10. The polygenic nature of resistance in these two laboratory strains suggests that major genes for resistance to Cry1Ab were not common in the founding populations of O. nubilalis. A low initial frequency of major genes for Cry1Ab resistance might be an important factor in delaying evolution of resistance to Bt corn in this pest.     

Bacillus thuringiensis Cry34Ab1/Cry35Ab1 Interactions with Western Corn Rootworm Midgut Membrane Binding Sites

Background

Bacillus thuringiensis (Bt) Cry34Ab1/Cry35Ab1 are binary insecticidal proteins that are co-expressed in transgenic corn hybrids for control of western corn rootworm, Diabrotica virgifera virgifera LeConte. Bt crystal (Cry) proteins with limited potential for field-relevant cross-resistance are used in combination, along with non-transgenic corn refuges, as a strategy to delay development of resistant rootworm populations. Differences in insect midgut membrane binding site interactions are one line of evidence that Bt protein mechanisms of action differ and that the probability of receptor-mediated cross-resistance is low.

Methodology/Principal Findings

Binding site interactions were investigated between Cry34Ab1/Cry35Ab1 and coleopteran active insecticidal proteins Cry3Aa, Cry6Aa, and Cry8Ba on western corn rootworm midgut brush border membrane vesicles (BBMV). Competitive binding of radio-labeled proteins to western corn rootworm BBMV was used as a measure of shared binding sites. Our work shows that ¹²⁵I-Cry35Ab1 binds to rootworm BBMV, Cry34Ab1 enhances ¹²⁵I-Cry35Ab1 specific binding, and that ¹²⁵I-Cry35Ab1 with or without unlabeled Cry34Ab1 does not share binding sites with Cry3Aa, Cry6Aa, or Cry8Ba. Two primary lines of evidence presented here support the lack of shared binding sites between Cry34Ab1/Cry35Ab1 and the aforementioned proteins: 1) No competitive binding to rootworm BBMV was observed for competitor proteins when used in excess with ¹²⁵I-Cry35Ab1 alone or combined with unlabeled Cry34Ab1, and 2) No competitive binding to rootworm BBMV was observed for unlabeled Cry34Ab1 and Cry35Ab1, or a combination of the two, when used in excess with ¹²⁵I-Cry3Aa, or ¹²⁵I-Cry8Ba.

Conclusions/Significance

Combining two or more insecticidal proteins active against the same target pest is one tactic to delay the onset of resistance to either protein. We conclude that Cry34Ab1/Cry35Ab1 are compatible with Cry3Aa, Cry6Aa, or Cry8Ba for deployment as insect resistance management pyramids for in-plant control of western corn rootworm.     

Prediction of three-dimensional structure of Cry1Ab21 toxin from Bacillus thuringiensis Bt IS5056

Cry1Ab21 is a δ-endotoxin produced by Bacillus thuringiensis Bt IS5056. The toxic spectrum of this protein is reported to span Lepidopteran, Dipteran and nematodes. Here, we predict the theoretical structural model of newly reported Cry1Ab21 toxin by homology modeling on the structure of the Cry1Aa toxin (2.5?Å). Cry1Ab21 resembles the Cry1Aa toxin structure by sharing a common 3D structure with three domains along with few structural deviations. The main differences being located in the length of loops, absence of α7b, α9b, β10, β11, β12 and presence of additional β0 component. Some of the components like α10a, α10b, α11a are spatially positioned at different locations. A better understanding of 3D structure will be helpful in the design of efficient biopecticides.     

Amino acid and divalent ion permeability of the pores formed by the Bacillus thuringiensis toxins Cry1Aa and Cry1Ac in insect midgut brush border membrane vesicles

The pores formed by Bacillus thuringiensis insecticidal toxins have been shown to allow the diffusion of a variety of monovalent cations and anions and neutral solutes. To further characterize their ion selectivity, membrane permeability induced by Cry1Aa and Cry1Ac to amino acids (Asp, Glu, Ser, Leu, His, Lys and Arg) and to divalent cations (Mg(2+), Ca(2+) and Ba(2+)) and anions (SO(4)(2-) and phosphate) was analyzed at pH 7.5 and 10.5 with midgut brush border membrane vesicles isolated from Manduca sexta and an osmotic swelling assay. Shifting pH from 7.5 to 10.5 increases the proportion of the more negatively charged species of amino acids and phosphate ions. All amino acids diffused well across the toxin-induced pores, but, except for aspartate and glutamate, amino acid permeability was lower at the higher pH. In the presence of either toxin, membrane permeability was higher for the chloride salts of divalent cations than for the potassium salts of divalent anions. These results clearly indicate that the pores are cation-selective.     

Structural and Biophysical Characterization of Bacillus thuringiensis Insecticidal Proteins Cry34Ab1 and Cry35Ab1

Bacillus thuringiensis strains are well known for the production of insecticidal proteins upon sporulation and these proteins are deposited in parasporal crystalline inclusions. The majority of these insect-specific toxins exhibit three domains in the mature toxin sequence. However, other Cry toxins are structurally and evolutionarily unrelated to this three-domain family and little is known of their three dimensional structures, limiting our understanding of their mechanisms of action and our ability to engineer the proteins to enhance their function. Among the non-three domain Cry toxins, the Cry34Ab1 and Cry35Ab1 proteins from B. thuringiensis strain PS149B1 are required to act together to produce toxicity to the western corn rootworm (WCR) Diabrotica virgifera virgifera Le Conte via a pore forming mechanism of action. Cry34Ab1 is a protein of ∼14 kDa with features of the aegerolysin family (Pfam06355) of proteins that have known membrane disrupting activity, while Cry35Ab1 is a ∼44 kDa member of the toxin_10 family (Pfam05431) that includes other insecticidal proteins such as the binary toxin BinA/BinB. The Cry34Ab1/Cry35Ab1 proteins represent an important seed trait technology having been developed as insect resistance traits in commercialized corn hybrids for control of WCR. The structures of Cry34Ab1 and Cry35Ab1 have been elucidated to 2.15 Å and 1.80 Å resolution, respectively. The solution structures of the toxins were further studied by small angle X-ray scattering and native electrospray ion mobility mass spectrometry. We present here the first published structure from the aegerolysin protein domain family and the structural comparisons of Cry34Ab1 and Cry35Ab1 with other pore forming toxins.     

Role of alpha-helix seven of Bacillus thuringiensis Cry1Ab delta-endotoxin in membrane insertion, structural stability, and ion channel activity

Domain I of the Cry1Ab insecticidal toxic protein has seven alpha-helices and is considered to be involved in the ion channel activity. While other alpha-helices, particularly alpha-4 and alpha-5, have been extensively explored, the remaining alpha-helices have been slightly studied. Site-directed mutagenesis was used to generate mutations throughout sequences encoding the alpha-helix 7 to test its role in ion channel function. Every amino acid residue in alpha-helix 7 was mutated to alanine. Most resultant proteins, e.g., D225A, W226A, Y229A, N230A, R233A, R234A, D242A, and F247A yielded no protoxin or were sensitive to degradation by trypsin or Manduca sexta midgut juice. Other mutant proteins, R224A, R228A, and E235A, were resistant to degradation to the above proteases but were 8, 30, and 12 times less toxic to M. sexta, respectively, than the wild-type Cry1Ab. Circular dichroism spectroscopy indicated a very small change in the R228A spectrum, while R224A and E235A display the same spectrum as the wild-type protein. These three mutant proteins showed little differences from Cry1Ab when analyzed by saturation binding and competition binding kinetics with (125)I-labeled toxin or by surface plasmon resonance to M. sexta brush border membrane vesicles. More conservative amino acid substitutions were introduced into alpha-helix 7 residues: R228K, F232Y, E235Q, and F247Y. In comparison with wild-type Cry1Ab, mutant proteins R228K, F232Y, E235A, and E235Q selectively discriminate between K+ and Rb+, while R224A and R228A had reduced inhibition of short-circuit current for both ions, when analyzed by voltage clamping of M. sexta midguts.     

Tracking the source of Bacillus thuringiensis Cry1Ab endotoxin in the environment

The application of Bacillus thuringiensis (Bt) and the growing of genetically-modified crops are currently practised to control infestations of crop-eating insects. The increasing use of these biopesticides could lead to an increase in Cry1Ab endotoxin in both terrestrial and aquatic environments. The aim of this study was to quantify levels of Cry1Ab endotoxin and locate its source in the environment. Agricultural soils and surface waters were spiked with crystals (biopesticide-Dipel^®) or with pure Bt-corn endotoxin. Cry1Ab concentrations were then determined with immunoassays. Additionally, surface water, soils and sediments were sampled in an area sprayed with Bt kurstaki and at a site where genetically-modified corn expressing Cry1Ab is grown. Isotopic analysis was performed on the endotoxin from Bt and Bt corn to characterize the proportions of ¹³C/¹²C and ¹⁵N/¹⁴N. The results showed that Bt-corn endotoxin is degraded more rapidly in water than in soils (t_1/2: 4 and 9 days, respectively), while crystals appeared to be more resilient, as expected. The isotopic patterns of ¹³C and ¹⁵N in Bt-corn endotoxin differed markedly from Bt, making it possible to track the source of Cry1Ab in the environment. Preliminary field surveys indicate that Cry1Ab is fairly uncommon in aquatic environments, being found only at trace concentrations when it is detected.