How to map ses, a mutant of Arabidopsis thaliana affecting pollen development

In Arabidopsis, map-based cloning has been developed to an effective method in mutant genetic analysis because high-density markers are available, candidate genes or genomic sequences can be amplified by PCR and transgenic techniques are simplified. Mutant ses named from shortened early-stage siliques was used as an example to show how to map a mutant in this day. By the process of bulked segregants analysis, linkage testing, large-scale and fine scale mapping, mutant ses was narrowed into a 67 kb interval from CER448792 (2000541 bp) to CER464544 (2067844 bp) crossing over the right of BAC F12K11 to the left of the BAC F4H5 including at most 22 putative genes on the top of chromosome l. In sequence-based map of Arabidopsis genes with Mutant phenotype (SMAGMP) mutant ses was between ATlg06150 (EMB1444) and ATlg08060 (MOM). The SES mapping also showed that developed markers on polymorphism site of CAPC not only were simplified and but worked well. 24 markers from CAPC used in the mapping maybe help Arabidopsis researches with others and the methods related to SES mapping also gave an example of positional cloning.     

ses, a novel visible mutant ofArabidopsis thaliana related to anther development

Analysis of mutants and clone of genes is crucial for unraveling the mechanism of anther development. The lack of elongation of siliques in a novel shortened early-stage siliques (ses) mutant was caused by unsuccessful pollination because of aborted pollens. At stage 11, microspores of mutantses appeared weakly stained and degenerated. At stage 14, mutantses produced abnormal pollens, and the anther wall was collapsed and crumpled; furthermore, some cavities were also found under the epidermis. Mutantses showed that the gene responsible for the defects plays a role in anther development. By mapping, mutantses was narrowed into a 67-kb interval on chromosome 1 between CER448792 (2,000,541 bp) and CER464544 (2,067,844 bp). By using the sequence-based map ofArabidopsis genes with mutant phenotypes,ses was localized on the right of phenotype marker AT1g06150 and on the left of phenotype marker AT1g08060. The phenotyping and mapping data both pointed to the conclusion thatses was a novel mutant related to anther development. Sequencing showed that there was a point mutation in gene AT1G06710.1; thus, gene AT1G06710.1 is the mist likely candidate gene responsible for the mutation.     

Saturating the genetic map of Arabidopsis thaliana with embryonic mutations

One goal of the Arabidopsis genome project is to identify every gene with an essential function in growth and development. Towards that end, the results are reported here of a mapping project designed to enhance the linkage map of Arabidopsis and establish a valuable resource of mutations in essential genes with known map locations. Embryo-defective (emb) mutations were chosen because they represent the most common heritable defect identified following mutagenesis in Arabidopsis. Multiple marker lines with easily scored phenotypes were constructed to facilitate mapping efforts. Recombination data were obtained for 169 mutants defective in embryo-genesis. The chromosomal locations of 110 emb genes are presented in this report. Twenty-six of these genes are tagged with T-DNA. Nine other mutants isolated following seed transformation appear to contain chromosomal translocations. Another 31 mutant genes in the collectiohave been assigned to a linkage group but not yet placed on the map. Nineteen examples of duplicate alleles have also been found. This is consistent with the estimate that approximately 500 genes readily mutate to give an embryo-defective phenotype in Arabidopsis. With continued progress, it may therefore be possible to approach saturation for this important class of mutations. Molecular cloning of these genes should be facilitated by identifying cDNAs and genomic sequences that map to similar locations.     

Comparison between a coffee single copy chromosomal region and Arabidopsis duplicated counterparts evidenced high level synteny between the coffee genome and the ancestral Arabidopsis genome

The Arabidopsis thaliana genome sequence provides a catalogue of reference genes that can be used for comparative analysis of other species thereby facilitating map-based cloning in economically important crops. We made use of a coffee bacterial artificial chromosome (BAC) contig linked to the S_H3 leaf rust resistance gene to assess microsynteny between coffee (Coffea arabica L.) and Arabidopsis. Microsynteny was revealed and the matching counterparts to C. arabica contigs were seen to be scattered throughout four different syntenic segments of Arabidopsis on chromosomes (Ath) I, III, IV and V. Coffee BAC filter hybridizations were performed using coffee putative conserved orthologous sequences to Arabidopsis predicted genes located on the different Arabidopsis syntenic regions. The coffee BAC contig related to the S_H3 region was successfully consolidated and later on validated by fingerprinting. Furthermore, the anchoring markers appeared in same order on the coffee BAC contigs and in all Arabidopsis segments with the exception of a single inversion on AtIII and AtIV Arabidopsis segments. However, the S_H3 coffee region appears to be closer to the ancestral genome segment (before the divergence of Arabidopsis and coffee) than any of the duplicated counterparts in the present-day Arabidopsis genome. The genome duplication events at the origin of its Arabidopsis counterparts occurred most probably after the separation (i.e. 94 million years ago) of Euasterid (Coffee) and Eurosid (Arabidopsis).     

Fine mapping of the<Emphasis Type="Italic"> parthenocarpic fruit</Emphasis> (<Emphasis Type="Italic">pat</Emphasis>) mutation in tomato

The parthenocarpic fruit (pat) gene of tomato is a recessive mutation conferring parthenocarpy, which is the capability of a plant to set seedless fruits in the absence of pollination and fertilization. Parthenocarpic mutants offer a useful method to regulate fruit production and a suitable experimental system to study ovary and fruit development. In order to map the Pat locus, two populations segregating from the interspecific cross Lycopersicon esculentum × Lycopersicon pennellii were grown, and progeny plants were classified as parthenocarpic or wild-type by taking into account some characteristic aberrations affecting mutant anthers and ovules. Through bulk segregant analysis, we searched for both random and mapped AFLPs linked to the target gene. In this way, the Pat locus was assigned to the long arm of chromosome 3, as also confirmed by the analysis of a set of L. pennellii substitution and introgression lines. Afterwards, the Pat position was refined by using simple sequence repeats (SSRs) and conserved ortholog set (COS) markers mapping in the target region. The tightest COSs were converted into CAPS or SCAR markers. At present, two co-dominant SCAR markers encompassing a genetic window of 1.2 cM flank the Pat locus. Considering that these markers are orthologous to Arabidopsis genes, a positional cloning exploiting the tomato-Arabidopsis microsynteny seems to be a short-term objective.Communicated by F. Salamini     

Molecular map of the Chlamydomonas reinhardtii nuclear genome

We have prepared a molecular map of the Chlamydomonas reinhardtii genome anchored to the genetic map. The map consists of 264 markers, including sequence-tagged sites (STS), scored by use of PCR and agarose gel electrophoresis, and restriction fragment length polymorphism markers, scored by use of Southern blot hybridization. All molecular markers tested map to one of the 17 known linkage groups of C. reinhardtii. The map covers approximately 1,000 centimorgans (cM). Any position on the C. reinhardtii genetic map is, on average, within 2 cM of a mapped molecular marker. This molecular map, in combination with the ongoing mapping of bacterial artificial chromosome (BAC) clones and the forthcoming sequence of the C. reinhardtii nuclear genome, should greatly facilitate isolation of genes of interest by using positional cloning methods. In addition, the presence of easily assayed STS markers on each arm of each linkage group should be very useful in mapping new mutations in preparation for positional cloning.     

Fine genetic mapping and physical delimitation of the lesion mimic gene <Emphasis Type="Italic">spotted leaf 5</Emphasis> (<Emphasis Type="Italic">spl5</Emphasis>) in rice (<Emphasis Type="Italic">Oryza sativa</Emphasis> L.)

Spotted leaf 5 (spl5), a lesion mimic mutant, was first identified in rice (Oryza sativa L.) japonica cv. Norin8 in 1978. This mutant exhibits spontaneous disease-like lesions in the absence of any pathogens and resistance to rice blast and bacterial blight; however, the target gene has not yet been isolated. In the present study, we employed a map-based cloning strategy to finely map the spl5 gene. In an initial mapping with 100 F₂ individuals (spl5/spl5) derived from a cross between the spl5 mutant and indica cv. 93-11, the spl5 gene was located in a 3.3-cM region on chromosome 7 using six simple sequence repeat (SSR) markers. In a high-resolution genetic mapping, two F₂ populations with 3,149 individuals (spl5/spl5) were derived from two crosses between spl5 mutant and two indica cvs. 93-11 and Zhefu802 and six sequence-tagged site (STS) markers were newly developed. Finally, the spl5 gene was mapped to a region of 0.048 cM between two markers SSR7 and RM7121. One BAC/PAC contig map covering these markers’ loci and the spl5 gene was constructed through Pairwise BLAST analysis. Our bioinformatics analysis shows that the spl5 gene is located in the 80-kb region between two markers SSR7 and RM7121 with a high average ratio of physical to genetic distance (1.67 Mb/cM) and eighteen candidate genes. The analysis of these candidate genes indicates that the spl5 gene represents a novel class of regulators controlling cell death and resistance response in plants.     

Mapping genes essential for embryo development in Arabidopsis thaliana.

Summary We have previously isolated and characterized over 90 recessive mutants of Arabidopsis thaliana defective in embryo development. These emb mutants have been shown to differ in lethal phase, extent of abnormal development, and response in culture. We demonstrate in this report the value and efficiency of mapping emb genes relative to visible and molecular markers. Sixteen genes essential for embryo development were mapped relative to visible markers by analyzing progeny of selfed F₁ plants. Embryonic lethals are now the most common type of visible marker included on the linkage map of Arabidopsis. Backcrosses were used in several cases to orient genes relative to adjacent markers. Three genes were located to chromosome arms with telotrisomics by screening for a reduction in the percentage of aborted seeds produced by F₁ plants. A restriction fragment length polymorphism (RFLP) mapping strategy that utilizes pooled EMB/EMB F₂ plants was devised to increase the efficiency of mapping embryonic lethals relative to molecular markers. This strategy was tested by demonstrating that the biol locus of Arabidopsis is within 0.5 cM of an existing RFLP marker. Mapping embryonic lethals with both visible and molecular markers may therefore help to identify large numbers of genes with essential functions in Arabidopsis.     

Exploratory integration of peanut genetic and physical maps and possible contributions from Arabidopsis

Arachis hypogaea is a widely cultivated crop both as an oilseed and protein source. The genomic analysis of Arachis species hitherto has been limited to the construction of genetic maps; the most comprehensive one contains 370 loci over 2,210 cM in length. However, no attempt has been made to analyze the physical structure of the peanut genome. To investigate the practicality of physical mapping in peanut, we applied a total of 117 oligonucleotide-based probes (overgos) derived from genetically mapped RFLP probes onto peanut BAC filters containing 182,784 peanut large-insert DNA clones in a multiplex experimental design; 91.5% of the overgos identified at least one BAC clone. In order to gain insights into the potential value of Arabidopsis genome sequence for studies in divergent species with complex genomes such as peanut, we employed 576 Arabidopsis-derived overgos selected on the basis of maximum homology to orthologous sequences in other plant taxa to screen the peanut BAC library. A total of 353 (61.3%) overgos detected at least one peanut BAC clone. This experiment represents the first steps toward the creation of a physical map in peanut and illustrates the potential value of leveraging information from distantly related species such as Arabidopsis for both practical applications such as comparative map-based cloning and shedding light on evolutionary relationships. We also evaluated the possible correlation between functional categories of Arabidopsis overgos and their success rates in hybridization to the peanut BAC library.Electronic Supplementary Material Supplementary material is available for this article at     

A physical map covering the nsv locus that confers resistance to Melon necrotic spot virus in melon (Cucumis melo L.)

Melon necrotic spot virus (MNSV) is a member of the genus Carmovirus, which produces severe yield losses in melon and cucumber crops. The nsv gene is the only known natural source of resistance against MNSV in melon, and confers protection against all widespread strains of this virus. nsv has been previously mapped in melon linkage group 11, in a region spanning 5.9 cM, saturated with RAPD and AFLP markers. To identify the nsv gene by positional cloning, we started construction of a high-resolution map for this locus. On the basis of the two mapping populations, F₂ and BC1, which share the same resistant parent PI 161375 (nsv/nsv), and using more than 3,000 offspring, a high-resolution genetic map has been constructed in the region around the nsv locus, spanning 3.2 cM between CAPS markers M29 and M132. The availability of two melon BAC libraries allowed for screening and the identification of new markers closer to the resistance gene, by means of BAC-end sequencing and mapping. We constructed a BAC contig in this region and identified the marker 52K20sp6, which co-segregates with nsv in 408 F₂ and 2.727 BC1 individuals in both mapping populations. We also identified a single 100 kb BAC that physically contains the resistance gene and covers a genetic distance of 0.73 cM between both BAC ends. These are the basis for the isolation of the nsv recessive-resistance gene.     

Physical mapping in large genomes: accelerating anchoring of BAC contigs to genetic maps through in silico analysis

Anchored physical maps represent essential frameworks for map-based cloning, comparative genomics studies, and genome sequencing projects. High throughput anchoring can be achieved by polymerase chain reaction (PCR) screening of bacterial artificial chromosome (BAC) library pools with molecular markers. However, for large genomes such as wheat, the development of high dimension pools and the number of reactions that need to be performed can be extremely large making the screening laborious and costly. To improve the cost efficiency of anchoring in such large genomes, we have developed a new software named Elephant (electronic physical map anchoring tool) that combines BAC contig information generated by FingerPrinted Contig with results of BAC library pools screening to identify BAC addresses with a minimal amount of PCR reactions. Elephant was evaluated during the construction of a physical map of chromosome 3B of hexaploid wheat. Results show that a one dimensional pool screening can be sufficient to anchor a BAC contig while reducing the number of PCR by 384-fold thereby demonstrating that Elephant is an efficient and cost-effective tool to support physical mapping in large genomes. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users. E. Paux and F. Legeai contributed equally to this work.     

A platform of high‐density INDEL/CAPS markers for map‐based cloning in Arabidopsis

Map‐based cloning has been widely used to identify genes responsible for mutant phenotypes in Arabidopsis, especially those mutants generated by EMS or fast neutron mutagenesis. The success of map‐based cloning relies on the availability of molecular markers that distinguish the polymorphisms between two Arabidopsis ecotypes. So far, most molecular markers in Arabidopsis have been generated by individual laboratories or the Arabidopsis Information Resource (TAIR). However, the TAIR markers, which are distributed unevenly on the five Arabidopsis chromosomes, only cover approximately 25% of the Arabidopsis BACs. Designing and testing molecular markers is still a time‐consuming endeavor. Here we report the construction of a high‐resolution BAC‐based Arabidopsis mapping platform (AMP), using Col‐0 and Ler as model ecotypes. The AMP comprises 1346 markers (1073 INDEL and 273 CAPS/dCAPS markers), of which 971 were newly designed and experimentally confirmed, 179 were from published papers and 196 were TAIR markers. These AMP markers cover 1186 BACs, 1121 of which are in non‐centromere regions, representing approximately 75% of the Arabidopsis BACs in non‐centromere regions. All the marker information is included on the AMP website ( http://amp.genomics.org.cn/ ) for easy access and download, and sets of standard markers for initial chromosomal localization of a particular gene are recommended. The feasibility of using the AMP to map mutated genes is also discussed.     

A Physical Map of Arabidopsis thaliana Chromosome 3 Represented by Two Contigs of CIC YAC, P1, TAC and BAC Clones

We have constructed a physical map of Arabidopsis thaliana chromosome3 by ordering the clones from CIC YAC, P1, TAC and BAC librariesusing the sequences of a variety of genetic and EST markersand terminal sequences of clones. The markers used were 112DNA markers, 145 YAC end sequences, and 156 end sequences ofP1, TAC and BAC clones. The entire genome of chromosome 3, exceptfor the centromeric and telomeric regions, was covered by twolarge contigs, 13.6 Mb and 9.2 Mb long. This physical map willfacilitate map-based cloning experiments as well as genome sequencingof chromosome 3. The map and end sequence information are availableon the KAOS (Kazusa Arabidopsis data Opening Site) web siteat http://www.kazusa.or.jp/arabi/.     

Refined genetic and comparative physical mapping of the canine copper toxicosis locus

Recently, the copper toxicosis (CT) locus in Bedlington terriers was assigned to canine chromosome region CFA10q26, which is homologous to human chromosome region HSA2p13-21. A comparative map between CFA10q21-26 and HSA2p13-21 was constructed by using genes already localized to HSA2p13-21. A high-resolution radiation map of CFA10q21-26 was constructed to facilitate positional cloning of the CT gene. For this map, seven Type I and eleven Type II markers were mapped. Using homozygosity mapping, the CT locus could be confined to a 42.3 cR₃₀₀₀ region, between the FH2523 and C10.602 markers. On the basis of a partial BAC contig, it was estimated that 1-cR₃₀₀₀ is equivalent to approximately 210 kb, implying that the CT candidate region is therefore estimated to be about 9 Mb. Received: 16 December 1999 / Accepted: 23 February 2000     

Concomitant reiterative BAC walking and fine genetic mapping enable physical map development for the broad-spectrum late blight resistance region,<Emphasis Type="Italic"> RB</Emphasis>

The wild potato species Solanum bulbocastanum is a source of genes for potent late blight resistance. We previously mapped resistance to a single region of the S. bulbocastanum chromosome 8 and named the region RB (for "Resistance from S. Bulbocastanum "). We now report physical mapping and contig construction for the RB region via a novel reiterative method of BAC walking and concomitant fine genetic mapping. BAC walking was initiated using RFLP markers previously shown to be associated with late blight resistance. Subcontig extension was accomplished using new probes developed from BAC ends. Significantly, BAC end and partial BAC sequences were also used to develop PCR-based markers to enhance map resolution in the RB region. As they were developed from BAC clones of known position relative to RB, our PCR-based markers are known a priori to be physically closer to the resistance region. These markers allowed the efficient screening of large numbers of segregating progeny at the cotyledon stage, and permitted us to assign the resistance phenotype to a region of approximately 55 kb. Our markers also directed BAC walking efforts away from regions distantly related to RB in favor of the 55-kb region. Because the S. bulbocastanum genotype used in BAC library construction is heterozygous for RB (RB/rb), codominant PCR-based markers, originally developed for fine-scale mapping, were also used to determine homolog origins for individual BAC clones. Ultimately, BAC contigs were constructed for the RB region from both resistant (RB) and susceptible (rb) homologs.Communicated by R. Hagemann     

Comparative genomic mapping between a 754 kb region flanking DREB1A in Arabidopsis thaliana and maize

Comparative mapping between model plant species for which the complete genome sequence is known and crop species has been suggested as a new strategy for the isolation of agronomically valuable genes. In this study, we tested whether comparative mapping between Arabidopsisand maize of a small region (754 kb) surrounding the DREB1A gene in Arabidopsis could lead to the identification of an orthologous region in maize containing the DREB1A homologue. The genomic sequence information available for Arabidopsis allowed for the selection of conserved, low-copy genes that were used for the identification of maize homologues in a large EST database. In total, 17 maize homologues were mapped. A second BLAST comparison of these genes to the recently completed Arabidopsis sequence revealed that 15 homologues are likely to be orthologous as the highest similarity score was obtained either with the original Arabidopsis gene or with a highly similar Arabidopsis gene localized on a duplication of the investigated region on chromosome 5. The map position of these genes showed a significant degree of orthology with the Arabidopsis region. Nevertheless, extensive duplications and rearrangements in the Arabidopsisand maize genomes as well as the evolutionary distance between Arabidopsis and maize make it unlikely that orthology and collinearity between these two species are sufficient to aid gene prediction and cloning in maize.     

Physical mapping of a rice lesion mimic gene,<Emphasis Type="Italic"> Spl1</Emphasis> , to a 70-kb segment of rice chromosome 12

The rice lesion mimic mutant spotted leaf 1 ( spl1) was first identified in the rice ( Oryza sativa) cultivar Asahi in 1965. This mutant displayed spontaneous disease-like lesions in the absence of any pathogen, and was found to confer resistance to multiple isolates of rice blast. We employed a map-based cloning strategy to localize the Spl1 gene. A total of ten cleaved amplified polymorphic sequence (CAPS) markers linked to the Spl1 gene were identified and mapped to an 8.5-cM region on chromosome 12. A high-resolution genetic map was developed using these ten CAPS markers and a segregating population consisting of 3202 individuals. A BAC contig containing four BAC clones was constructed, and Spl1 was localized to a 423-kb region. Seven spl1 mutants were obtained from the IR64 deletion mutant collection, and molecular analysis using these mutants delimited the Spl1 gene to a 70-kb interval, covered by two BAC clones. These results provide the basis for cloning this gene, which is involved in cell death and disease resistance in rice.Communicated by R. HagemannThe first two authors contributed equally to the work     

Sugar beet BAC library construction and assembly of a contig spanning <Emphasis Type="Italic">Rf1</Emphasis>, a restorer-of-fertility gene for Owen cytoplasmic male sterility

Rf1 is a nuclear gene that controls fertility restoration in cases of cytoplasmic male sterility caused by the Owen cytoplasm in sugar beet. In order to isolate the gene by positional cloning, a BAC library was constructed from a restorer line, NK198, with the genotype Rf1Rf1. The library contained 32,180 clones with an average insert size of 97.8 kb, providing 3.4 genome equivalents. Five AFLP markers closely linked to Rf1 were used to screen the library. As a result, we identified eight different BAC clones that were clustered into two contigs. The gap between the two contigs was filled by chromosome walking. To map the Rf1 region in more detail, we developed five cleaved amplified polymorphic sequence (CAPS) markers from the BAC DNAs identified, and carried out genotyping of 509 plants in the mapping population with the Rf1-flanking AFLP and CAPS markers. Thirteen plants in which recombination events had occurred in the vicinity of the Rf1 locus were identified and used to map the molecular markers relative to each other and to Rf1. In this way, we were able to restrict the possible location of the Rf1 gene to a minimum of six BAC clones spanning an interval of approximately 250 kb. The first two authors contributed equally to this work.     

The circling behavior of the deafblind LEW-<Emphasis Type="Italic">ci2</Emphasis> rat is linked to a segment of RNO10 containing <Emphasis Type="Italic">Myo15</Emphasis> and <Emphasis Type="Italic">Kcnj12</Emphasis>

The LEW/Ztm-ci2 rat is an autosomal recessive mutant that displays circling behavior, deafness, progressive retinopathy, locomotor hyperactivity, ataxia, and opisthotonus. We performed a genome-wide scan of a (LEW/Ztm-ci2 × BN/Ztm) F₁ × LEW/Ztm-ci2 backcross population with anonymous microsatellite markers to analyze the genetics of this mutant rat. This linkage analysis demonstrated a very strong association of RNO10 SSLP markers to the phenotype with a core region in the central part of the chromosome. The knowledge of genes mapping to this part of the rat genome and their linkage to SSLP markers is still poor. We developed SSLP markers closely linked to genes, which might be responsible for the mutant phenotype by using the growing amount of rat-specific DNA sequences available at World Wide Web databases. Application of this method facilitated the search for candidate genes for the phenotype of the LEW-ci2 rat. We were able to map Myo15 and its neighboring genes, Znf179 and Aldh3a1, to the region of interest and Myo1c to a more distal location on RNO10. Further rat BAC clones were used to create a physical map of the region of interest. This map revealed the position of further genes. Among those is Kcnj12. Owing to their localization on RNO10 and their involvement in a similar pathology in human and mouse, Myo15 and Kcnj12 can be regarded as candidate genes for the deafblind phenotype of the LEW-ci2 rat.