Enhancing the feasibility of many biotechnological processes through enzyme deactivation studies

Enzymes are deactivated by different ways to an inactive state, which is a major constraint in the development of biotechnological processes. Understanding the complex process of enzyme deactivation will be helpful in enhancing the feasibility of many biological processes. This paper mainly deals with the different ways by which enzymes are inactivated, which includes the role of thermodynamics in deactivation. Different models namely, unified deactivation theory, single exponential model, rapid equilibrium model, isozyme model and bacterial contamination model used to describe the complex deactivation processes are also discussed in this communication. The complete understanding of deactivation process is very essential in commercialization because enzyme activity and stability of the enzyme play a critical role in economics of biotechnological processes. Activity and stability of the enzyme are conflicting properties and trade-off between these factors must be considered in the selection and design of enzymes.     

Practical limitations on the use of thermodynamic data from isothermal processes

Enthalpy, entropy and volume data obtained for processes studied in aqueous solvents generally have been assumed to apply to the solute process without consideration of the coupling between the process and the two-state equilibrium of water. Walrafen's confirmation of the latter in 1983 shows that long-debated model to be correct so the enthalpy and entropy contributions to a free-energy change to give unambiguous information must be corrected for the water contribution. The situation is further complicated by differential chemical interaction of amphiphilic solutes with the two water species since experimental complications make correction difficult or impossible. A more general source of error in isothermal experiments is the linkage to the thermal-equilibrium device. That thermal problem discovered only in 1967 is not yet treated in textbooks although it is always a complication in isothermal processes and responsible for a hierarchy of thermodynamic quantities with different levels of reliability. Major consequences for several familiar thermodynamic and extra-thermodynamic methods are examined in terms of relative reliability. In most cases the thermal corrections are restricted by changes in phase state on cooling.     

Structural, kinetic, and thermodynamic studies of specificity designed HIV-1 protease

HIV-1 protease recognizes and cleaves more than 12 different substrates leading to viral maturation. While these substrates share no conserved motif, they are specifically selected for and cleaved by protease during viral life cycle. Drug resistant mutations evolve within the protease that compromise inhibitor binding but allow the continued recognition of all these substrates. While the substrate envelope defines a general shape for substrate recognition, successfully predicting the determinants of substrate binding specificity would provide additional insights into the mechanism of altered molecular recognition in resistant proteases. We designed a variant of HIV protease with altered specificity using positive computational design methods and validated the design using X-ray crystallography and enzyme biochemistry. The engineered variant, Pr3 (A28S/D30F/G48R), was designed to preferentially bind to one out of three of HIV protease's natural substrates; RT-RH over p2-NC and CA-p2. In kinetic assays, RT-RH binding specificity for Pr3 increased threefold compared to the wild-type (WT), which was further confirmed by isothermal titration calorimetry. Crystal structures of WT protease and the designed variant in complex with RT-RH, CA-p2, and p2-NC were determined. Structural analysis of the designed complexes revealed that one of the engineered substitutions (G48R) potentially stabilized heterogeneous flap conformations, thereby facilitating alternate modes of substrate binding. Our results demonstrate that while substrate specificity could be engineered in HIV protease, the structural pliability of protease restricted the propagation of interactions as predicted. These results offer new insights into the plasticity and structural determinants of substrate binding specificity of the HIV-1 protease.     

Comparative studies on the mechanisms of paraquat and 1-methyl-4-phenylpyridine (MPP+) cytotoxicity

1-methyl-4-phenylpyridine (MPP+) is the putative toxic metabolite of 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP) and is structurally similar to the herbicide paraquat (PQ++). We have therefore compared the effects of MPP+ and PQ++ on a well characterized experimental model, namely isolated rat hepatocytes. PQ++ generates reactive oxygen species within cells by redox cycling and its toxicity to hepatocytes was potentiated by pretreatment with 1,3-bis(2-chloroethyl)-1-nitrosourea (BCNU), an inhibitor of glutathione reductase. In BCNU-treated cells, PQ++ caused GSH depletion, lipid peroxidation and cell death. These cytotoxic effects were prevented by the antioxidant N,N'-diphenyl-p-phenylenediamine (DPPD) and the iron-chelating agent desferrioxamine. MPP+ also caused GSH depletion in BCNU-treated hepatocytes but its cytotoxicity was not markedly affected by BCNU, nor was it accompanied by significant lipid peroxidation. DPPD and desferrioxamine also failed to prevent MPP+-induced cell death. We conclude that the production of active oxygen species is likely to play a major role in PQ++ cytotoxicity, while MPP+-induced cell damage may involve additional, more important toxic mechanisms.     

The effect of visible light on mutagenic activity of 1-methyl-1-nitrosourea and 1-methyl-3-nitro-1-nitrosoguanidine

Irradiation with visible light reduced the mutagenic activity of 1-methyl-1-nitrosourea (MNH) and 1-methyl-3-nitro-1-nitrosoguanidine (MNG) solutions during their application onArabidopsis thaliana seeds for 24 hours. The antimutagenic effect of light was stronger with MNG than with MNH and in solutions buffered to pH 5 than in aqueous solutions. The decrease of activity of both the mutagens corresponded with the rate and degree of their photolysis. In the paper are presented the curves for the dependence of the decomposition of both substances and the formation of nitrous acid on pH and temperature of the solutions, amount of seeds.     

Effects of thermodynamic nonideality in kinetic studies

Experimental evidence is presented for concentration dependence of the pseudo-firstorder rate constant describing the rate of inversion of sucrose by 2 m HCl; and also of the increase in maximal velocity for the catalytic reduction of pyruvate by lactate dehydrogenase that results from addition of the inert macromolecular solutes bovine serum albumin, ovalbumin, and Dextran T70. These somewhat unusual and seemingly diverse observations are examined in terms of a theory formulated on the basis of two equilibrium reactions, the first describing complex formation between two reactants, and the second isomerization of that complex to an activated state prior to product formation. This formulation permits consideration of activity coefficient ratios relevant to the equilibria and the expression of these ratios as power series in total solution composition. Quantitative assessment of the experimental results is made possible in these terms by estimating the magnitudes of the constant coefficients of the virial expansions as excluded volumes. It is concluded that the result observed in the sucrose inversion study finds rational explanation in thermodynamic nonideality factors governing the overall equilibrium between the reactants and the activated complex of sucrose and hydronium ion. For the enzyme-catalyzed reaction the same general equation applies but particular attention is given to the simplified form that is relevant to high substrate concentrations, where, in the absence of inert compounds, the conventional maximal velocity is approached. In this region an increase in velocity observed upon addition of an inert macromolecular component may be considered explicitly in terms of excluded volume effects related to a shape change in the isomerization between enzyme-substrate complex and its activated state.     

Quantum-chemical studies of aflatoxin B1, sterigmatocystin and versicolorin A, and a comparison with their mutagenic activity

The INDO atomic charges q and Wiberg bond indices p (in electrons) were calculated for aflatoxin B1, sterigmatocystin and versicolorin A. The C-2-C-3 bond in these compounds has the same bond order and is predicted to be the most reactive towards epoxidation. The electronic effects do not explain the observed differences in mutagenicity and toxicity.     

Neurotoxicity studies with the monoamine oxidase B substrate 1-methyl-3-phenyl-3-pyrroline

The neurotoxic properties of the parkinsonian inducing agent 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP) are dependent on its metabolic activation in a reaction catalyzed by centrally located monoamine oxidase B (MAO-B). This reaction ultimately leads to the permanently charged 1-methyl-4-phenylpyridinium species MPP(+), a 4-electron oxidation product of MPTP and a potent mitochondrial toxin. The corresponding 5-membered analogue, 1-methyl-3-phenyl-3-pyrroline, is also a selective MAO-B substrate. Unlike MPTP, the MAO-B-catalyzed oxidation of 1-methyl-3-phenyl-3-pyrroline is a 2-electron process that leads to the neutral 1-methyl-3-phenylpyrrole. MPP(+) is thought to exert its toxic effects only after accumulating in the mitochondria, a process driven by the transmembrane electrochemical gradient. Since this energy-dependent accumulation of MPP(+) relies upon its permanent charge, 1-methyl-3-phenyl-3-pyrrolines and their pyrrolyl oxidation products should not be neurotoxic. We have tested this hypothesis by examining the neurotoxic potential of 1-methyl-3-phenyl-3-pyrroline and 1-methyl-3-(4-chlorophenyl)-3-pyrroline in the C57BL/6 mouse model. These pyrrolines did not deplete striatal dopamine while analogous treatment with MPTP resulted in 65-73% depletion. Kinetic studies revealed that both 1-methyl-3-phenyl-3-pyrroline and its pyrrolyl oxidation product were present in the brain in relatively high concentrations. Unlike MPP(+), however, 1-methyl-3-phenylpyrrole was cleared from the brain quickly. These results suggest that the brain MAO-B-catalyzed oxidation of xenobiotic amines is not, in itself, sufficient to account for the neurodegenerative properties of a compound like MPTP. The rapid clearance of 1-methyl-3-phenylpyrroles from the brain may contribute to their lack of neurotoxicity.     

Effects of thermodynamic nonideality in ligand binding studies

Effects of thermodynamic nonideality are considered in relation to the quantitative characterization of the interaction between a small ligand. S, and a macromolecular acceptor. A, by two types of experimental procedure. The first involves determination of the concentration of ligand in dialysis equilibrium with the acceptor/ligand mixture, and the second, measurement of the concentration of unbound ligand in the reaction mixture by ultrafiltration or the rate of dialysis method. For each situation explicit expressions are formulated for the appropriate binding function with allowance for composition-dependent nonideality effects expressed in terms of molar volume, charge-charge interaction and covolume contributions. The magnitudes of these effects are explored with the aid of experimental studies on the binding of tryptophan and of methyl orange to bovine serum albumin. It is concluded for experiments conducted utilizing either equilibrium dialysis or frontal gel chromatography that, provided a correction is made for any Donnan redistribution of ligand, theoretically predicted acceptor-concentration dependence is likely to be negligible and that use of the conventional binding equation written for an ideal system is appropriate to the analysis of the results. Use of ultrafiltration or the rate of dialysis method requires examination of the assumption that the activity coefficient ratio y(A)y(s)/y(AS) for the reaction mixture approximates unity; but again reassurance is provided that nonideality manifested as a dependence of the binding function on acceptor concentration is unlikely to be significant.     

Kinetic and thermodynamic studies of tet repressor-tetracycline interaction

Stopped-flow measurements have been employed to study the kinetics of the conformational changes in TetR (B) induced by tetracycline binding with and without Mg(2+) ions. Result of stopped-flow fluorometry measurements at pH 8.0 indicate conformational changes in the helix-turn-helix motif in the N-terminal domain and in the C-terminal inducer binding domain. Binding of tetracycline (Tc) to TetR in the absence of Mg(2+) can be described by a simple kinetics process, which is limited to the first step association without any unimolecular conformational change step upon Tc binding. The rate constants for this process are equal to 2.0 x 10(5) M(-)(1) s(-)(1) and 2.1 s(-)(1) for the forward and backward reaction, respectively, and gave the binding constant K(a) = 0.96 x 10(5) M(-)(1). The kinetics of [Tc-Mg](+) binding to TetR can be described by reactions in which the first step describes the association characterized by the rate constants k(a) = 1.4 x 10(5) M(-)(1) s(-)(1) and k(d) = 2.2 x 10(-)(2) s(-)(1) and binding constant K(a) = 6.3 x 10(6) M(-)(1). The first step of [Tc-Mg](+) association is followed by at least three conformational change steps, which occur in the inducer binding site and then propagate to the surroundings of Trp75 and Trp43 residues. The rate constants for the forward, k(c), and backward, k(-)(c), reaction for each of these conformational steps have been determined. The thermodynamics of the binding of tetracycline with and without Mg(2+) to TetR was investigated by isothermal titration calorimetry (ITC) at pH 8.0 and 25 degrees C. The measurement shows that TetR dimer possesses two equivalent binding sites for tetracycline, characterized by binding constant K(a) = 9.0 x 10(6) M(-)(1) and K(a) = 7.0 x 10(4) M(-)(1) for Tc with and without Mg(2+), respectively. The binding of the inducer to TetR, in the presence and absence of Mg(2+) ion, is an enthalpy-driven reaction characterized by DeltaH = -51 kJ mol(-)(1) and DeltaH = -33 kJ mol(-)(1), respectively. The entropy change, DeltaS, for the interaction in the presence of Mg(2+) is equal to -38.9 J K(-)(1) mol(-)(1), and for the tetracycline alone, it was estimated at -17.6 J K(-)(1) mol(-)(1).     

Structural and thermodynamic studies of Bergerac-SH3 chimeras

Bergerac-type chimeras of spectrin SH3 were designed by extending a β-hairpin by eight amino acids so that the extension protruded from the domain body like a “nose” being exposed to the solvent. A calorimetric study of several Bergerac-SH3 variants was carried out over a wide range of pH values and protein concentrations and the three-dimensional structure of one of them, SHH, was determined. X-ray studies confirmed that the nose had a well defined β-structure whilst the chimera formed a stable tetramer within the crystal unit because of four tightly packed noses. In the pH range of 4–7 the heat-induced unfolding of some chimeras was complex and concentration dependent, whilst at pH values below 3.5, low protein concentrations of all the chimeras studied, including SHH, seemed to obey a monomolecular two-state unfolding model. The best set of data was obtained for the SHA variant, the unfolding heat effects of which were systematically higher than those of the WT protein (about 16.4 kJ/mol at 323 K), which may be close to the upper limit of the enthalpy gain due to 10 residue β-hairpin folding. At the same time, the chimeras with high nose stability, which, like SHH, have a hydrophobic (IVY) cluster on their surface, showed a lower apparent unfolding heat effect, much closer to that of the WT protein. The possible reasons for this difference are discussed.     

Production of 2-methyl-1-butanol and 3-methyl-1-butanol in engineered Corynebacterium glutamicum

The pentanol isomers 2-methyl-1-butanol and 3-methyl-1-butanol represent commercially interesting alcohols due to their potential application as biofuels. For a sustainable microbial production of these compounds, Corynebacterium glutamicum was engineered for producing 2-methyl-1-butanol and 3-methyl-1-butanol via the Ehrlich pathway from 2-keto-3-methylvalerate and 2-ketoisocaproate, respectively. In addition to an already available 2-ketoisocaproate producer, a 2-keto-3-methylvalerate accumulating C. glutamicum strain was also constructed. For this purpose, we reduced the activity of the branched-chain amino acid transaminase in an available C. glutamicum l-isoleucine producer (K2P55) via a start codon exchange in the ilvE gene enabling accumulation of up to 3.67 g/l 2-keto-3-methylvalerate. Subsequently, nine strains expressing different gene combinations for three 2-keto acid decarboxylases and three alcohol dehydrogenases were constructed and characterized. The best strains accumulated 0.37 g/l 2-methyl-1-butanol and 2.76 g/l 3-methyl-1-butanol in defined medium within 48 h under oxygen deprivation conditions, making these strains ideal candidates for additional strain and process optimization.     

Comparative studies on thermodynamic characteristics of pea legumin and legumin-T thermal denaturation

Characteristics of thermal denaturation of pea legumin and a product of its limited proteolysis with trypsin – legumin-T, in a wide range of NaCl concentrations have bean measured by means of differential scanning microcalorimetry. By the increase of NaCl concentration, the number of cooperative units (domains) increases from 1 per one polypeptide chain to 2 for legumin and 1.8 for legumin-T. Deconvolution of denaturation peaks have revealed up to three peaks, which were ascribed to the dissociation of protein macromolecules to subunits and the unfolding of - and β-polypeptide chains. The analysis of experimental data based on some assumptions showed that the splitting of C-termini of -chains, which are not constituents of cooperative domains, in the course of limited trypsinolysis results in destabilization of the quaternary structure of legumin and loosening of -chains, as well as decrease of the temperatures of their maximum stability.     

Structural and thermodynamic studies of simple aldose reductase-inhibitor complexes

The competitive inhibition constants of series of inhibitors related to phenylacetic acid against both wild-type and the doubly mutanted C298A/W219Y aldose reductase have been measured. Van't Hoff analysis shows that these acids bind with an enthalpy near -6.8 kcal/mol derived from the electrostatic interactions, while the 100-fold differences in binding affinity appear to be largely due to entropic factors that result from differences in conformational freedom in the unbound state. These temperature studies also point out the difference between substrate and inhibitor binding. X-ray crystallographic analysis of a few of these inhibitor complexes both confirms the importance of a previously described anion binding site and reveals the hydrophobic nature of the primary binding site and its general plasticity. Based on these results, N-glycylthiosuccinimides were synthesized to demonstrate their potential in studies that probe distal binding sites. Reduced alpha-lipoic acid, an anti-oxidant and therapeutic for diabetic complications, was shown to bind aldose reductase with a binding constant of 1 microM.     

Microbial asymmetric hydrolysis of N-acetyl-1-methyl-3-phenylpropylamine to optically active 1-methyl-3-phenylpropylamine

Summary The asymmetric hydrolysis of N-acetyl-1-methyl-3-phenypropylamine (MPAc) by microorganisms was investigated. Various bacteria belonging to the genera Bacillus, Agrobacterium, Corynebacterium, Arthrobacter, Brevibacterium, Cellulomonas, Acinetobacter, Nocardia and Rhodococcus showed this hydrolysing activity and yielded (S)-1-methyl-3-phenylpropylamine (MPPA). Using washed cells of N. erythropolis IAM 1440, 15.1 mg/ml of (S)-MPPA was formed, with a 38.8% conversion yield and high stereoselectivity (97.9% enantiomeric excess), in an organic solvent-water diphase system. The same (S)-amine and (S)-1-phenylethylamine were also produced in good yields from the valeryl and isovaleryl derivatives of MPPA, and N-acetyl-1-phenylethylamine, respectively.     

Effect of impurities in biodiesel-derived waste glycerol on the performance and feasibility of biotechnological processes

The rapid development of biodiesel production technology has led to the generation of tremendous quantities of glycerol wastes, as the main by-product of the process. Stoichiometrically, it has been calculated that for every 100 kg of biodiesel, 10 kg of glycerol are produced. Based on the technology imposed by various biodiesel plants, glycerol wastes may contain numerous kinds of impurities such as methanol, salts, soaps, heavy metals, and residual fatty acids. This fact often renders biodiesel-derived glycerol unprofitable for further purification. Therefore, the utilization of crude glycerol though biotechnological means represents a promising alternative for the effective management of this industrial waste. This review summarizes the effect of various impurities-contaminants that are found in biodiesel-derived crude glycerol upon its conversion by microbial strains in biotechnological processes. Insights are given concerning the technologies that are currently applied in biodiesel production, with emphasis to the impurities that are added in the composition of crude glycerol, through each step of the production process. Moreover, extensive discussion is made in relation with the impact of the nature of impurities upon the performances of prokaryotic and eukaryotic microorganisms, during crude glycerol bioconversions into a variety of high added-value metabolic products. Finally, aspects concerning ways of crude glycerol treatment for the removal of inhibitory contaminants as reported in the literature are given and comprehensively discussed.     

Simulation of concentration polarization in electrokinetic processes by network thermodynamic methods.

Simple techniques of network thermodynamics are used to study the influence of concentration polarization on the determination of electrokinetic properties of physical and biological membrane systems. A network model of the polarization phenomenon resulting from discontinuities in transport numbers between the membrane and their adjacent solutions is proposed. The concentration profiles and potential drop across the membrane in plugs of monodisperse polystyrene particles and in giant algal cells have been simulated using the electrical circuit simulation program SPICE.