Structure of oxidized bacteriophage T4 glutaredoxin (thioredoxin). Refinement of native and mutant proteins.

The structure of wild-type bacteriophage T4 glutaredoxin (earlier called thioredoxin) in its oxidized form has been refined in a monoclinic crystal form at 2.0 A resolution to a crystallographic R-factor of 0.209. A mutant T4 glutaredoxin gives orthorhombic crystals of better quality. The structure of this mutant has been solved by molecular replacement methods and refined at 1.45 A to an R-value of 0.175. In this mutant glutaredoxin, the active site residues Val15 and Tyr16 have been substituted by Gly and Pro, respectively, to mimic that of Escherichia coli thioredoxin. The main-chain conformation of the wild-type protein is similar in the two independently determined molecules in the asymmetric unit of the monoclinic crystals. On the other hand, side-chain conformations differ considerably between the two molecules due to heterologous packing interactions in the crystals. The structure of the mutant protein is very similar to the wild-type protein, except at mutated positions and at parts involved in crystal contacts. The active site disulfide bridge between Cys14 and Cys17 is located at the first turn of helix alpha 1. The torsion angles of these residues are similar to those of Escherichia coli thioredoxin. The torsion angle around the S-S bond is smaller than that normally observed for disulfides: 58 degrees, 67 degrees and 67 degrees for wild-type glutaredoxin molecule A and B and mutant glutaredoxin, respectively. Each sulfur atom of the disulfide cysteines in T4 glutaredoxin forms a hydrogen bond to one main-chain nitrogen atom. The active site is shielded from solvent on one side by the beta-carbon atoms of the cysteine residues plus side-chains of residues 7, 9, 21 and 33. From the opposite side, there is a cleft where the sulfur atom of Cys14 is accessible and can be attacked by a nucleophilic thiolate ion in the initial step of the reduction reaction.     

Three-dimensional solution structure of the reduced form of Escherichia coli thioredoxin determined by nuclear magnetic resonance spectroscopy

The three-dimensional solution structure of reduced (dithiol) thioredoxin from Escherichia coli has been determined with distance and dihedral angle constraints obtained from 1H NMR spectroscopy. Reduced thioredoxin has a well-defined global fold consisting of a central five-strand beta-sheet and three long helices. The beta-strands are packed in the sheet in the order beta 1 beta 3 beta 2 beta 4 beta 5, with beta 1, beta 3, and beta 2 parallel and beta 2, beta 4, and beta 5 arranged in an antiparallel fashion. Two of the helices connect strands of the beta-sheet: alpha 1 between beta 1 and beta 2 and alpha 2 between beta 2 and beta 3. Strands beta 4 and beta 5 are connected by a short loop that contains a beta-bulge. Strands beta 3 and beta 4 are connected by a long loop that contains a series of turn-like or 3(10) helical structures. The active site Cys-Gly-Pro-Cys sequence forms a protruding loop between strand beta 2 and helix alpha 2. The structure is very similar overall to that of oxidized (disulfide) thioredoxin obtained from X-ray crystal structure analysis but differs in the local conformation of the active site loop. The distance between the sulfurs of Cys 32 and Cys 35 increases from 2.05 A in the disulfide bridge to 6.8 +/- 0.6 A in the dithiol of reduced thioredoxin, as a result of a rotation of the side chain of Cys 35 and a significant change in the position of Pro 34. This conformational change has important implications for the mechanism of thioredoxin as a protein disulfide oxidoreductase.     

Thioredoxins and glutaredoxins as facilitators of protein folding

Thiol-disulfide oxidoreductase systems of bacterial cytoplasm and eukaryotic cytosol favor reducing conditions and protein thiol groups, while bacterial periplasm and eukaryotic endoplasmatic reticulum provide oxidizing conditions and a machinery for disulfide bond formation in the secretory pathway. Oxidoreductases of the thioredoxin fold superfamily catalyze steps in oxidative protein folding via protein-protein interactions and covalent catalysis to act as chaperones and isomerases of disulfides to generate a native fold. The active site dithiol/disulfide of thioredoxin fold proteins is CXXC where variations of the residues inside the disulfide ring are known to increase the redox potential like in protein disulfide isomerases. In the catalytic mechanism thioredoxin fold proteins bind to target proteins through conserved backbone-backbone hydrogen bonds and induce conformational changes of the target disulfide followed by nucleophilic attack by the N-terminally located low pK(a) Cys residue. This generates a mixed disulfide covalent bond which subsequently is resolved by attack from the C-terminally located Cys residue. This review will focus on two members of the thioredoxin superfamily of proteins known to be crucial for maintaining a reduced intracellular redox state, thioredoxin and glutaredoxin, and their potential functions as facilitators and regulators of protein folding and chaperone activity.     

On the role of the cis-proline residue in the active site of DsbA

In addition to the Cys-Xaa-Xaa-Cys motif at position 30-33, DsbA, the essential catalyst for disulfide bond formation in the bacterial periplasm shares with other oxidoreductases of the thioredoxin family a cis-proline in proximity of the active site residues. In the variant DsbA(P151A), this residue has been changed to an alanine, an almost isosteric residue which is not disposed to adopt the cis conformation. The substitution strongly destabilized the structure of DsbA, as determined by the decrease in the free energy of folding. The pKa of the thiol of Cys30 was only marginally decreased. Although in vivo the variant appeared to be correctly oxidized, it exhibited an activity less than half that of the wild-type enzyme with respect to the folding of alkaline phosphatase, used as a reporter of the disulfide bond formation in the periplasm. DsbA(P151A) crystallized in a different crystal form from the wild-type protein, in space group P2(1) with six molecules in the asymmetric unit. Its X-ray structure was determined to 2.8 A resolution. The most significant conformational changes occurred at the active site. The loop 149-152 adopted a new backbone conformation with Ala151 in a trans conformation. This rearrangement resulted in the loss of van der Waals interactions between this loop and the disulfide bond. His32 from the Cys-Xaa-Xaa-Cys sequence presented in four out of six molecules in the asymmetric unit a gauche conformation not observed in the wild-type protein. The X-ray structure and folding studies on DsbA(P151A) were consistent with the cis-proline playing a major role in the stabilization of the protein. A role for the positioning of the substrate is discussed. These important properties for the enzyme function might explain the conservation of this residue in DsbA and related proteins possessing the thioredoxin fold.     

Crystal structure of a highly acidic neurotoxin from scorpion Buthus tamulus at 2.2A resolution reveals novel structural features

The crystal structure of a highly acidic neurotoxin from the scorpion Buthus tamulus has been determined at 2.2A resolution. The amino acid sequence determination shows that the polypeptide chain has 64 amino acid residues. The pI measurement gave a value of 4.3 which is one of the lowest pI values reported so far for a scorpion toxin. As observed in other alpha-toxins, it contains four disulphide bridges, Cys12-Cys63, Cys16-Cys36, Cys22-Cys46, and Cys26-Cys48. The crystal structure reveals the presence of two crystallographically independent molecules in the asymmetric unit. The conformations of two molecules are identical with an r.m.s. value of 0.3A for their C(alpha) tracings. The overall fold of the toxin is very similar to other scorpion alpha-toxins. It is a betaalphabetabeta protein. The beta-sheet involves residues Glu2-Ile6 (strand beta1), Asp32-Trp39 (strand beta3) and Val45-Val55 (strand beta4). The single alpha-helix formed is by residues Asn19-Asp28 (alpha2). The structure shows a trans peptide bond between residues 9 and 10 in the five-membered reverse turn Asp8-Cys12. This suggests that this toxin belongs to classical alpha-toxin subfamily. The surface features of the present toxin are highly characteristic, the first (A-site) has residues, Phe18, Trp38 and Trp39 that protrude outwardly presumably to interact with its receptor. There is another novel face (N-site) of this neurotoxin that contains several negatively charged residues such as, Glu2, Asp3, Asp32, Glu49 and Asp50 which are clustered in a small region of the toxin structure. On yet another face (P-site) in a triangular arrangement, with respect to the above two faces there are several positively charged residues, Arg58, Lys62 and Arg64 that also protrude outwardly for a potentially potent interaction with other molecules. This toxin with three strong features appears to be one of the most toxic molecules reported so far. In this sense, it may be a new subclass of neurotoxins with the largest number of hot spots.     

Identification of the disulfide bonds in human plasma protein SP-40,40 (apolipoprotein-J).

SP-40,40, a human plasma protein, is a modulator of the membrane attack complex formation of the complement system as well as a subcomponent of high-density lipoproteins. In the present study, the positions of the disulfide bonds in SP-40,40 were determined. SP-40,40 was purified from human seminal plasma by affinity chromatography using an anti-SP-40,40 monoclonal antibody and reversed-phase, high-performance liquid chromatography (HPLC). The protein was digested with trypsin and the fragments were separated by reversed-phase HPLC. The peptides containing disulfide bonds were fluorophotometrically detected with 4-(aminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole (ABD-F). The peptides containing more than two disulfide bonds were further digested with Staphylococcus aureus V8 protease and lysylendopeptidase, and the fragments were isolated by HPLC. The amino acid compositions and the amino acid sequences of the peptides containing only a disulfide bond were determined. Disulfide bonds thus determined were between Cys58(alpha)-Cys107(beta), Cys68(alpha)-Cys99(beta), Cys75(alpha)-Cys94(beta), and Cys86(alpha)-Cys80(beta). Since there was no free sulfhydryl groups in the SP-40,40 molecule, Cys78(alpha) and Cys91(beta) should also be linked by a disulfide bond. It is notable that all of the disulfide bonds in SP-40,40 are not only formed by inter-chain pairing, but also appear to form an antiparallel ladder-like structure between the two chains. The unique structure could be related to the functions of SP-40,40.     

Refined structure of elongation factor EF-Tu from Escherichia coli.

The crystal structure of trypsin-modified elongation factor Tu from Escherichia coli, in complex with the cofactor guanosine diphosphate has been refined to a crystallographic R-factor of 19.3%, at 2.6 A resolution. In the model described, the root-mean-square deviation from ideality is 0.019 A for bond distances and 3.9 degrees for angles. The protein consists of three domains: an alpha/beta domain (residues 1 to 200), containing the binding site of the GDP cofactor, and consisting of a six-stranded beta-pleated sheet, six alpha-helices, and two all-beta domains (residues 209 to 299 and 300 to 393), belonging to the tertiary structural class of antiparallel beta-barrels. The GDP-binding domain has a folding that is found in other GDP-binding proteins. Elongation factor Tu interacts with proteins, nucleic acids and nucleotides, making this molecule well suited as a model system for the study of these interactions.     

Buried S-nitrosocysteine revealed in crystal structures of human thioredoxin

We have determined the 1.65 A crystal structure of human thioredoxin-1 after treatment with S-nitrosoglutathione, providing a high-resolution view of this important protein modification and mechanistic insight into protein transnitrosation. Thioredoxin-1 appears to play an intermediary role in cellular S-nitrosylation and is important in numerous biological and pathobiological activities. S-Nitroso modifications of cysteines 62 and 69 are clearly visible in the structure and display planar cis geometries, whereas cysteines 32, 35, and 73 form intra- and intermolecular disulfide bonds. Surprisingly, the Cys 62 nitroso group is completely buried and pointing to the protein interior yet is the most readily formed at neutral pH. The Cys 69 nitroso group is also protected but requires a higher pH for stable formation. The helix intervening between residues 62 and 69 shifts by approximately 0.5 A to accommodate the SNO groups. The crystallographic asymmetric unit contains three independent molecules of thioredoxin, providing three views of the nitrosated protein. The three molecules are in general agreement but display subtle differences, including both cis and trans conformers for Cys 69 SNO in molecule C, and greater disorder in the Cys 62-Cys 69 helix in molecule B. Possible mechanisms for protein transnitrosation with specific geometric requirements and charge stabilization of the nitroxyl disulfide reaction intermediate are discussed.     

Crystal structure of beta-amylase from Bacillus cereus var. mycoides at 2.2 A resolution.

The crystal structure of beta-amylase from Bacillus cereus var. mycoides was determined by the multiple isomorphous replacement method. The structure was refined to a final R-factor of 0.186 for 102,807 independent reflections with F/sigma(F) > or = 2.0 at 2.2 A resolution with root-mean-square deviations from ideality in bond lengths, and bond angles of 0.014 A and 3.00 degrees, respectively. The asymmetric unit comprises four molecules exhibiting a dimer-of-dimers structure. The enzyme, however, acts as a monomer in solution. The beta-amylase molecule folds into three domains; the first one is the N-terminal catalytic domain with a (beta/alpha)8 barrel, the second one is the excursion part from the first one, and the third one is the C-terminal domain with two almost anti-parallel beta-sheets. The active site cleft, including two putative catalytic residues (Glu172 and Glu367), is located on the carboxyl side of the central beta-sheet in the (beta/alpha)8 barrel, as in most amylases. The active site structure of the enzyme resembles that of soybean beta-amylase with slight differences. One calcium ion is bound per molecule far from the active site. The C-terminal domain has a fold similar to the raw starch binding domains of cyclodextrin glycosyltransferase and glucoamylase.     

Structure of scorpion toxin variant-3 at 1.2 A resolution.

The crystal structure of the variant-3 protein neurotoxin from the scorpion Centruroides sculpturatus Ewing has been refined at 1.2 A resolution using restrained least-squares. The final model includes 492 non-hydrogen protein atoms, 453 protein hydrogen atoms, eight 2-methyl-2,4-pentanediol (MPD) solvent atoms, and 125 water oxygen atoms. The variant-3 protein model geometry deviates from ideal bond lengths by 0.024 A and from ideal angles by 3.6 degrees. The crystallographic R-factor for structure factors calculated from the final model is 0.192 for 17,706 unique reflections between 10.0 to 1.2 A. A comparison between the models of the initial 1.8 A and the 1.2 A refinement shows a new arrangement of the previously poorly defined residues 31 to 34. Multiple conformations are observed for four cysteine residues and an MPD oxygen atom. The electron density indicates that disulfide bonds between Cys12 and Cys65 and between Cys29 and Cys48 have two distinct side-chain conformations. A molecule of MPD bridges neighboring protein molecules in the crystal lattice, and both MPD enantiomers are present in the crystal. A total of 125 water molecules per molecule of protein are included in the final model with B-values ranging from 11 to 52 A2 and occupancies from unity down to 0.4. Comparisons between the 1.2 A and 1.8 A models, including the bound water structure and crystal packing contacts, are emphasized.     

Oxidized and synchrotron cleaved structures of the disulfide redox center in the N-terminal domain of Salmonella typhimurium AhpF

The flavoprotein component (AhpF) of Salmonella typhimurium alkyl hydroperoxide reductase contains an N-terminal domain (NTD) with two contiguous thioredoxin folds but only one redox-active disulfide (within the sequence -Cys129-His-Asn-Cys132-). This active site is responsible for mediating the transfer of electrons from the thioredoxin reductase-like segment of AhpF to AhpC, the peroxiredoxin component of the two-protein peroxidase system. The previously reported crystal structure of AhpF possessed a reduced NTD active site, although fully oxidized protein was used for crystallization. To further investigate this active site, we crystallized an isolated recombinant NTD (rNTD); using diffraction data sets collected first at our in-house X-ray source and subsequently at a synchrotron, we showed that the active site disulfide bond (Cys129-Cys132) is oxidized in the native crystals but becomes reduced during synchrotron data collection. The NTD disulfide bond is apparently particularly sensitive to radiation cleavage compared with other protein disulfides. The two data sets provide the first view of an oxidized (disulfide) form of NTD and show that the changes in conformation upon reduction of the disulfide are localized and small. Furthermore, we report the apparent pKa of the active site thiol to be approximately 5.1, a relatively low pKa given its redox potential (approximately 265 mV) compared with most members of the thioredoxin family.     

The crystal structure of TrxA(CACA): Insights into the formation of a [2Fe-2S] iron-sulfur cluster in an Escherichia coli thioredoxin mutant

Escherichia coli thioredoxin is a small monomeric protein that reduces disulfide bonds in cytoplasmic proteins. Two cysteine residues present in a conserved CGPC motif are essential for this activity. Recently, we identified mutations of this motif that changed thioredoxin into a homodimer bridged by a [2Fe-2S] iron-sulfur cluster. When exported to the periplasm, these thioredoxin mutants could restore disulfide bond formation in strains lacking the entire periplasmic oxidative pathway. Essential for the assembly of the iron-sulfur was an additional cysteine that replaced the proline at position three of the CGPC motif. We solved the crystalline structure at 2.3 Angstroms for one of these variants, TrxA(CACA). The mutant protein crystallized as a dimer in which the iron-sulfur cluster is replaced by two intermolecular disulfide bonds. The catalytic site, which forms the dimer interface, crystallized in two different conformations. In one of them, the replacement of the CGPC motif by CACA has a dramatic effect on the structure and causes the unraveling of an extended alpha-helix. In both conformations, the second cysteine residue of the CACA motif is surface-exposed, which contrasts with wildtype thioredoxin where the second cysteine of the CXXC motif is buried. This exposure of a pair of vicinal cysteine residues apparently allows thioredoxin to acquire an iron-sulfur cofactor at its active site, and thus a new activity and mechanism of action.     

Disulfide bond reduction in fibrinogen: calcium protection and effect on clottability

Fibrinogen contains 29 disulfide bonds. Limited reduction in buffers containing calcium led to cleavage of three of them: the two A alpha 442Cys-A alpha 472Cys intrapeptide disulfide bonds and the symmetrical A alpha 28Cys-A alpha 28Cys bond. The limited reduction did not affect clotting by thrombin. However, a prolongation of the thrombin clotting time occurred when the limited reduction took place in the absence of calcium. The bonds reduced under this condition included the three already mentioned and also the two gamma 326Cys-gamma 339Cys intrapeptide disulfide bonds located in the C-terminal ends of the gamma-chain. N-Terminal analysis of thrombin-treated samples showed that thrombin cleavage occurred at the normal A alpha 16-A alpha 17 site in fibrinogen that was partially reduced in the presence of calcium. By contrast, thrombin cleaved at the A alpha 19-A alpha 20 site in fibrinogen that was partially reduced in the absence of calcium, rendering the protein unclottable by removing the A alpha 17Gly-18Pro-19Arg peptide. The loss of thrombin clottability may have also come from gamma 326Cys-gamma 339Cys disulfide bond reduction since the structure supported by this bond may be important for the function of the C-terminal polymerization site. In samples of the partially reduced fibrinogen lacking the A alpha 17-19 residues, gel formation occurred through an oligomerization mechanism catalyzed by factor XIII.     

Importance of a single disulfide bond for the PsbO protein of photosystem II: protein structure stability and soluble overexpression in Escherichia coli

PsbO protein is an important constituent of the water-oxidizing complex, located on the lumenal side of photosystem II. We report here the efficient expression of the spinach PsbO in E. coli where the solubility depends entirely on the formation of the disulfide bond. The PsbO protein purified from a pET32 system that includes thioredoxin fusion is properly folded and functionally active. Urea unfolding experiments imply that the reduction of the single disulfide bridge decreases stability of the protein. Analysis of inter-residue contact density through the PsbO molecule shows that Cys51 is located in a cluster with high contact density. Reduction of the Cys28-Cys51 bond is proposed to perturb the packing interactions in this cluster and destabilize the protein as a whole. Taken together, our results give evidence that PsbO exists in solution as a compact highly ordered structure, provided that the disulfide bridge is not reduced.     

The MntC crystal structure suggests that import of Mn2+ in cyanobacteria is redox controlled

The MntC protein is the periplasmic solute-binding protein component of the high-affinity manganese ATP-binding cassette-type transport system in the cyanobacterium Synechocytis PCC sp. 6803. We have determined the structure of recombinant MntC at 2.9 A resolution by X-ray crystallography using a combination of multi-wavelength anomalous diffraction and molecular replacement. The presence of Mn2+ in the metal ion-binding site was ascertained by use of anomalous difference electron density maps using diffraction data collected at the Mn absorption edge. The MntC protein is similar to previously determined metal ion-binding, solute-binding proteins with two globular domains connected by an extended alpha-helix. However, the metal ion-binding site is asymmetric, with two of the four ligating residues (Glu220 and Asp295) situated closer to the ion than the two histidine residues (His89 and His154). A unique characteristic of the MntC is the existence of a disulfide bond between Cys219 and Cys268. Analysis of amino acid sequences of homologous proteins shows that conservation of the cysteine residues forming the disulfide bond occurs only in cyanobacterial manganese solute-binding proteins. One of the monomers in the MntC asymmetric unit trimer is disordered significantly in the globular domain containing the disulfide bond. The electron density on the manganese ion and on the disulfide bond in this monomer indicates that reduction of this bond changes the relative position of the lower domain and of the Glu220 ligand, potentially lowering the affinity towards Mn2+. This is confirmed by reduction of the disulfide bond in vitro, showing the release of bound Mn2+. We propose that the reduction or oxidation state of the disulfide bond can alter the binding affinity of the protein towards Mn2+ and thus determine whether these ions will be transported into the cytoplasm, or be available for photosystem II biogenesis in the periplasm.     

Assembly of mutant subunits of the nicotinic acetylcholine receptor lacking the conserved disulfide loop structure.

Each subunit of the nicotinic acetylcholine receptor (AChR) contains two conserved cysteine residues, which are known to form a disulfide bond, in the N-terminal extracellular domain. The role of this retained structural feature in the biogenesis of the AChR was studied by expressing site-directed mutant alpha and beta subunits together with other normal subunits from Torpedo californica AChR in Xenopus oocytes. Mutation of the cysteines at position 128 or 142 in the alpha subunit, or in the beta subunit, did not prevent subunit assembly. All Cys128 and Cys142 mutants of the alpha and beta subunits were able to associate with coexpressed other normal subunits, although associational efficiency of the mutant alpha subunits with the delta subunit was reduced. Functional studies of the mutant AChR complexes showed that the mutations in the alpha subunit abolished detectable 125I-alpha-bungarotoxin (alpha-BuTX) binding in whole oocytes, whereas the mutations in the beta subunit resulted in decreased total binding of 125I-alpha-BuTX and no detectable surface 125I-alpha-BuTX binding. Additionally, all mutant subunits, when co-expressed with the other normal subunits in oocytes, produced small acetylcholine-activated membrane currents, suggesting incorporation of only small numbers of functional mutant AChRs into the plasma membrane. The functional acetylcholine-gated ion channel formed with mutant alpha subunits, but not mutant beta subunits, could not be blocked by alpha-BuTX. Thus, a disulfide bond between Cys128 and Cys142 of the AChR alpha or beta subunits is not needed for acetylcholine-binding. However, this disulfide bond on the alpha subunit is necessary for formation of the alpha-BuTX-binding site. These results also suggest that the most significant effect caused by disrupting the conserved disulfide loop structure is intracellular retention of most of the assembled AChR complexes.     

Crystal structure of human peroxiredoxin 5, a novel type of mammalian peroxiredoxin at 1.5 A resolution

The peroxiredoxins define an emerging family of peroxidases able to reduce hydrogen peroxide and alkyl hydroperoxides with the use of reducing equivalents derived from thiol-containing donor molecules such as thioredoxin, glutathione, trypanothione and AhpF. Peroxiredoxins have been identified in prokaryotes as well as in eukaryotes. Peroxiredoxin 5 (PRDX5) is a novel type of mammalian thioredoxin peroxidase widely expressed in tissues and located cellularly to mitochondria, peroxisomes and cytosol. Functionally, PRDX5 has been implicated in antioxidant protective mechanisms as well as in signal transduction in cells. We report here the 1.5 A resolution crystal structure of human PRDX5 in its reduced form. The crystal structure reveals that PRDX5 presents a thioredoxin-like domain. Interestingly, the crystal structure shows also that PRDX5 does not form a dimer like other mammalian members of the peroxiredoxin family. In the reduced form of PRDX5, Cys47 and Cys151 are distant of 13.8 A although these two cysteine residues are thought to be involved in peroxide reductase activity by forming an intramolecular disulfide intermediate in the oxidized enzyme. These data suggest that the enzyme would necessitate a conformational change to form a disulfide bond between catalytic Cys47 and Cys151 upon oxidation according to proposed peroxide reduction mechanisms. Moreover, the presence of a benzoate ion, a hydroxyl radical scavenger, was noted close to the active-site pocket. The possible role of benzoate in the antioxidant activity of PRDX5 is discussed.     

Structure of azurin from Alcaligenes denitrificans refinement at 1.8 A resolution and comparison of the two crystallographically independent molecules

The structure of the blue copper protein azurin, from Alcaligenes denitrificans, has been refined crystallographically by restrained least-squares methods. The final crystallographic R value for 21,980 observed reflections to 1.8 A (1 A = 0.1 nm) resolution is 0.157. The asymmetric unit of the crystal contains two independent azurin molecules, the model for which comprises 1973 protein atoms, together with three SO2-4 ions, and 281 water molecules. Comparison of the two molecules shows very high correspondence. For 125 out of 129 residues (excluding only the chain termini, residues 1 to 2 and 128 to 129) the root-mean-square (r.m.s.) deviation in main-chain atom positions is 0.27 A. For other structural parameters r.m.s. deviations are also low; torsion angles 6.5 degrees, hydrogen bond lengths 0.12 A, bonds to copper 0.04 A and bond angles at the copper 3.9 degrees. The only significant differences are at the chain termini and in several loops. Some of these can be attributed to crystal packing effects, others to genuine structural microheterogeneity. Refinement has confirmed that the copper co-ordination is best described as distorted trigonal planar, with strong in-plane bonds to His46 N delta 1, His117 N delta 1 and Cys112 S gamma, and much weaker axial interactions with Met121 S delta and Gly45 C = O. Two N-H...S hydrogen bonds characterize Cys112 S gamma as a thiolate (S-) sulphur and may influence the visible absorption maximum. Atoms in and around the copper site have very low mobility, whereas the most mobile regions of the molecule are the chain termini and some of the connecting loops between secondary structure elements, especially those at the "southern" end, remote from the copper site. Main-chain to side-chain hydrogen bonds supply important stabilizing interactions at the "northern" end. Surface features include the hydrophobic patch around His117, probably important for electron transfer, the SO2-4 site at His83, and the general absence of ion pairs, despite the presence of many charged amino acid residues. The 281 water molecules include 182 that occur as approximately twofold-related pairs. There are no internal water molecules. The water sites common to both azurin molecules include those in surface pockets and some in intermolecular contact regions. They are characterized by relatively low thermal parameters and numerous protein contacts.     

Enzyme reduction of disulfide bonds by thioredoxin. The reactivity of disulfide bonds in human choriogonadotropin and its subunits.

The NADPH-dependent enzymic reduction of disulfide bonds in human choriogonadotropin and its two subunits, alpha and beta, was examined with thioredoxin and thioredoxin reductase from Escherichia coli. With 12 muM thioredoxin and 0.1 muM thioredoxin reductase at pH 7 all disulfide bonds in the alpha subunit could be reduced in 15 min. The reduction of disulfide bonds was recorded by a simple spectrophotometric assay at 340 nm, which allowed quantitation of the reduction rate and the number of disulfide bonds reduced. Partial reduction of the alpha subunit with thioredoxin followed by S-carboxymethylation with iodol[2-3H]acetic acid and analysis of tryptic peptides indicated that all S-S bonds in the alpha subunit were surface oriented and equally reactive. The usefulness of thioredoxin reduction of disulfide bonds as a chemical probe of protein structure was shown by the much slower reaction of disulfide bonds in the intact hormone as compared to its two biologically inactive subunits.