Combined subtraction hybridization and polymerase chain reaction amplification procedure for isolation of strain-specific Rhizobium DNA sequences.

A novel subtraction hybridization procedure, incorporating a combination of four separation strategies, was developed to isolate unique DNA sequences from a strain of Rhizobium leguminosarum bv. trifolii. Sau3A-digested DNA from this strain, i.e., the probe strain, was ligated to a linker and hybridized in solution with an excess of pooled subtracter DNA from seven other strains of the same biovar which had been restricted, ligated to a different, biotinylated, subtracter-specific linker, and amplified by polymerase chain reaction to incorporate dUTP. Subtracter DNA and subtracter-probe hybrids were removed by phenol-chloroform extraction of a streptavidin-biotin-DNA complex. NENSORB chromatography of the sequences remaining in the aqueous layer captured biotinylated subtracter DNA which may have escaped removal by phenol-chloroform treatment. Any traces of contaminating subtracter DNA were removed by digestion with uracil DNA glycosylase. Finally, remaining sequences were amplified by polymerase chain reaction with a probe strain-specific primer, labelled with 32P, and tested for specificity in dot blot hybridizations against total genomic target DNA from each strain in the subtracter pool. Two rounds of subtraction-amplification were sufficient to remove cross-hybridizing sequences and to give a probe which hybridized only with homologous target DNA. The method is applicable to the isolation of DNA and RNA sequences from both procaryotic and eucaryotic cells.     

Use of suppressor subtraction hybridization for finding strain-specific sequences in bacterial genomes

Comparisons of bacterial genomes demonstrate that even strains of one species may strikingly differ in gene set. Strain-specific genes are of considerable interest, as they may be responsible for distinguishing features, such as virulence or drug resistance, of the strain and may be employed as markers in epidemiological or evolutionary studies. Suppression subtractive hybridization (SSH) was shown to be suitable for generating a set of DNA fragments differing between two closely related bacterial strains. More than 95% DNA fragments selected by SSH proved to be specific for Staphylococcus aureus strains ZW compared with strain 29213.     

A rapid DNA isolation procedure for the identification of Campylobacter jejuni by the polymerase chain reaction

We have developed an efficient process for rapidly isolating campylobacter DNA using mechanical disruption combined with the guanidine-based reagent DNAzol. Template DNA was isolated by this method from cultures of Campylobacter jejuni resistant to lysis by boiling or enzymes and identified following polymerase chain reaction (PCR) amplification using primers specific for the hippuricase gene. Direct detection of campylobacters in poultry-processing samples by PCR is demonstrated in chicken carcass rinses spiked with lysis-resistant C. jejuni. Our results indicate that this method of DNA isolation may be ideal for direct PCR detection of pathogenic bacteria in complex samples of widely varied origin, especially when the target organisms are difficult to lyse by other means.     

Rapid method for processing soil samples for polymerase chain reaction amplification of specific gene sequences.

Bacterial cells can be differentially separated from soil colloids on the basis of their buoyant densities. By using this principle, a modified sucrose gradient centrifugation protocol has been developed for separating bacterial cells from most of the soil colloids. Since the bacterial cell suspension still contained some colloidal soil particles, which inhibited polymerase chain reaction amplification, a new "double" polymerase chain reaction method of analysis was adopted for amplification of Tn5-specific gene sequences. This new protocol allowed rapid detection of small numbers (1 to 10 CFU/g) of bacterial cells present in soil samples.     

Rapid method for processing soil samples for polymerase chain reaction amplification of specific gene sequences.

Bacterial cells can be differentially separated from soil colloids on the basis of their buoyant densities. By using this principle, a modified sucrose gradient centrifugation protocol has been developed for separating bacterial cells from most of the soil colloids. Since the bacterial cell suspension still contained some colloidal soil particles, which inhibited polymerase chain reaction amplification, a new "double" polymerase chain reaction method of analysis was adopted for amplification of Tn5-specific gene sequences. This new protocol allowed rapid detection of small numbers (1 to 10 CFU/g) of bacterial cells present in soil samples.     

HLA-DR typing using DNA amplification by the polymerase chain reaction and sequential hybridization to sequence-specific oligonucleotide probes

A series of sequence-specific oligonucleotides (SSOs) have been used to type alleles at the HLA-DRB1 locus. Genomic DNA was amplified to high copy number by the polymerase chain reaction (PCR) and hybridizations of the dot-blotted, amplified DNA to a series of 14 SSOs enabled the identification of the major specificities DR1-DRw14. Certain alleles (DR3 and DR4) could be rapidly and accurately identified by running the products of allele-specific amplification of genomic DNA on agarose gels. This approach facilitated the typing of serological specificities such as subtypes of DR3 (DRw17 and DRw18) as well as alleles previously detected by the mixed lymphocyte reaction including subtypes of DR4 (Dw4, Dw10, Dw13, Dw14, and Dw15). The HLA-DR types obtained by SSO probing conformed to rules of Mendelian inheritance when they were applied to a series of 75 families. A full DR type could be obtained from many individuals simultaneously without needing to separate or store viable lymphocytes. Thus, this technique may have considerable implications for the analysis of disease associations with HLA class II alleles, particularly in circumstances where facilities for the initial preparation and storage of the samples may be limited.     

DNA elution and amplification by polymerase chain reaction from dried blood spots.

A quick, sensitive and easily automatizable method for PCR amplification of genomic DNA eluted from dried blood spots is described. DNA is eluted from a 3-mm spot routinely used for neonatal screening of inherited diseases either by boiling or by sonication. A preliminary and brief spot-autoclaving step is mandatory to ensure optimal and reproducible PCR amplifications. Only 1% of the eluted DNA is required for PCR analysis allowing the execution of multiple genetic tests on the same blood spot. The method has been successfully applied to the detection of a known phenylketonuria-causing mutation and will facilitate the analysis of the genetic repository provided by Guthrie's cards stored in neonatal screening laboratories.     

Identification of Frankia strains in nodules by hybridization of polymerase chain reaction products with strain-specific oligonucleotide probes

A set of oligonucleotides has been developed to study the competitivity of two Frankia strains in the nodulation of the roots of two host plant species: Alnus glutinosa and Alnus incana. Two 20 mer-oligonucleotides, complementary to highly conserved sequences inside the nifH gene, were used as primers for the polymerase chain reaction (PCR) system in order to amplify microsymbiont DNA extracted from actinorhizae. PCR products were analyzed using two strain-specific 15-mer oligonucleotides identified in the amplified region. Hybridization data indicate that strain ACoN24d is more competitive than train ArI3 in the nodulation of both hosts.     

Intracellular amplification of proviral DNA in tissue sections using the polymerase chain reaction.

We developed a new method to amplify cell DNA in situ using the polymerase chain reaction (PCR). Proviral sequences of mouse mammary tumor virus (MMTV) contained in cultured cells and tissue sections were amplified intracellularly using a thermal cycler. Two techniques were employed to maintain the localization of the amplified DNA. First, complementary tails at the 5' ends of the oligonucleotide primers resulted in the synthesis of high molecular weight concatamers containing the target sequences. Second, the PCR was carried out in a thin film of agarose solidified over the tissue sections. The specifically amplified and localized DNA was then detected by in situ hybridization (ISH). Our results demonstrate that (a) DNA in tissue sections can serve as the target for the polymerase chain reaction in situ, (b) cell morphology is maintained, and (c) a target of 167 BP can be specifically detected in individual cells. This technique should be generally applicable to amplifying cellular DNA targets in tissue sections for detection in situ.     

Isolation of a Pseudomonas solanacearum-specific DNA probe by subtraction hybridization and construction of species-specific oligonucleotide primers for sensitive detection by the polymerase chain reaction.

A subtraction hybridization technique was employed to make a library enriched for Pseudomonas solanacearum-specific sequences. One cloned fragment, PS2096, hybridized under stringent conditions to DNA of 82 P. solanacearum strains representing all subgroups of the species. Other plant-associated bacteria, including closely related species such as Pseudomonas capacia, Pseudomonas picketti, or Pseudomonas syzygii, did not hybridize to PS2096. A minimum number of between 4 x 10(5) and 4 x 10(6) P. solanacearum cells could routinely be detected with PS2096 labelled either with [32P]dCTP or with digoxigenin-11-dUTP. To improve the sensitivity of detection, PS2096 was sequenced to allow the construction of specific oligonucleotide primers to be used for polymerase chain reaction (PCR) amplification. After 50 cycles of amplification, 5 to 116 cells, depending on the strain, could reproducibly be detected by visualization of a 148-bp PCR product on an agarose gel. A preliminary field trial in Burundi with the probe and PCR primers has confirmed that they are sensitive tools for specifically detecting low-level infections of P. solanacearum in potato tubers.     

Isolation of a Pseudomonas solanacearum-specific DNA probe by subtraction hybridization and construction of species-specific oligonucleotide primers for sensitive detection by the polymerase chain reaction.

A subtraction hybridization technique was employed to make a library enriched for Pseudomonas solanacearum-specific sequences. One cloned fragment, PS2096, hybridized under stringent conditions to DNA of 82 P. solanacearum strains representing all subgroups of the species. Other plant-associated bacteria, including closely related species such as Pseudomonas capacia, Pseudomonas picketti, or Pseudomonas syzygii, did not hybridize to PS2096. A minimum number of between 4 x 10(5) and 4 x 10(6) P. solanacearum cells could routinely be detected with PS2096 labelled either with [32P]dCTP or with digoxigenin-11-dUTP. To improve the sensitivity of detection, PS2096 was sequenced to allow the construction of specific oligonucleotide primers to be used for polymerase chain reaction (PCR) amplification. After 50 cycles of amplification, 5 to 116 cells, depending on the strain, could reproducibly be detected by visualization of a 148-bp PCR product on an agarose gel. A preliminary field trial in Burundi with the probe and PCR primers has confirmed that they are sensitive tools for specifically detecting low-level infections of P. solanacearum in potato tubers.     

Detection of human papilloma virus DNA sequences by polymerase chain reaction

We have developed a polymerase chain reaction-based procedure for reproducible detection of the E6-E7 gene in human papilloma virus DNA sequences using formalin-fixed, paraffin-embedded tissue sections. This procedure is a simple one-step procedure which does not require any elaborate hybridization following polymerase chain reaction amplification. The protocol combines modified tissue treatment and proper primer selection for efficient amplification of target DNA in a highly specific manner allowing identification in ethidium bromide-stained gels. The procedure described here is useful for a variety of tissue preparations, particularly formalin-fixed, paraffin-embedded archival tissues.     

A procedure for rapid isolation of cloned cDNA inserts using the polymerase chain reaction technique

A reproducible and rapid procedure for isolation of cloned cDNA insert from a lambda gt11 cDNA library is described. The procedure relies on the polymerase chain reaction method using forward and reverse primers for lambda gt11, followed by isolation of the cloned cDNA insert by a rapid technique. The procedure should also be applicable to isolation of cDNA inserts cloned in other vectors such as lambda gt10.     

A simple colorimetric DNA detection by target-induced hybridization chain reaction for isothermal signal amplification

A novel DNA detection method is presented based on a gold nanoparticle (AuNP) colorimetric assay and hybridization chain reaction (HCR). In this method, target DNA hybridized with probe DNA modified on AuNP, and triggered HCR. The resulting HCR products with a large number of negative charges significantly enhanced the stability of AuNPs, inhibiting aggregation of AuNPs at an elevated salt concentration. The approach was highly sensitive and selective. Using this enzyme-free and isothermal signal amplification method, we were able to detect target DNA at concentrations as low as 0.5 nM with the naked eye. Our method also has great potential for detecting other analytes, such as metal ions, proteins, and small molecules, if the target analytes could make HCR products attach to AuNPs.     

Re-usable DNA template for the polymerase chain reaction.

DNA covalently bound to an uncharged nylon membrane was used for consecutive amplifications of several different genes by PCR. Successful PCR amplifications were obtained for membrane-bound genomic and plasmid DNA. Membrane-bound genomic DNA templates were re-used at least 15 times for PCR with specific amplification of the desired gene each time. PCR amplifications of specific sequences of p53, p16, CYP1A1, CYP2D6, GSTM1 and GSTM3 were performed independently on the same strips of uncharged nylon membrane containing genomic DNA. PCR products were subjected to restriction fragment length polymorphism analysis, single-strand conformational polymorphism analysis and/or dideoxy sequencing to confirm PCR-amplified gene sequences. We found that PCR fragments obtained by amplification from bound genomic DNA as template were identical in sequence to those of PCR products obtained from free genomic DNA in solution. PCR was performed using as little as 5 ng genomic or 4 fg plasmid DNA bound to membrane. These results suggest that DNA covalently bound to membrane can be re-used for sample-specific PCR amplifications, providing a potentially unlimited source of DNA for PCR.     

Differential amplification of rRNA genes by polymerase chain reaction.

The polymerase chain reaction (PCR) is used widely to recover rRNA genes from naturally occurring communities for analysis of population constituents. We have found that this method can result in differential amplification of different rRNA genes. In particular, rDNAs of extremely thermophilic archaebacteria often cannot be amplified by the usual PCR methods. The addition of 5% (wt/vol) acetamide to a PCR mixture containing both archaebacterial and yeast DNA templates minimized nonspecific annealing of the primers and prevented preferential amplification of the yeast small-subunit rRNA genes.