The use of a partition locus to increase stability of tryptophan-operon-bearing plasmids in Escherichia coli

The stability of different derivatives of plasmid vectors pBR322 and pACYC184 carrying the tryptophan operon of Escherichia coli was monitored in various media. It was found that in the absence of any special selective pressure, all plasmids were lost from the culture. The stability varied depending both on the orientation of the inserted tryptophan fragment and the growth media used. The pBR322::trp+ plasmids were lost at an average frequency of 0.3 to 0.8% per cell generation, while the pACYC184::trp+ plasmid was lost at a rate higher than 5%. In all cases the whole plasmid was lost at a rate higher than 5%. In all cases the whole plasmid was lost, indicating a high stability of the plasmid::cloned DNA as such. To increase the stability of the cloning vectors, the partition locus of plasmid pSC101 was added to both the pBR322::trp+ and pACYC184::trp+ plasmids. The addition of this gene increased the replicon stability at least 3- to 10-fold, with the pBR322::trp+-par+ plasmids being the most stable. Also in this case, the stability was dependent on the plasmid type and on the growth medium. In no case was there a discoordinate loss of the antibiotic-resistance and tryptophan genes from the vectors.     

Characterization and molecular cloning of cryptic plasmids isolated from Lactobacillus casei

Four small cryptic plasmids were isolated from Lactobacillus casei strains, and restriction endonuclease maps of these plasmids were constructed. Three of the small plasmids (pLZ18C, pLZ19E, and pLZ19F1; 6.4, 4.9, and 4.8 kilobase pairs, respectively) were cloned into Escherichia coli K-12 by using pBR322, pACYC184, and pUC8 as vectors. Two of the plasmids, pLZ18C and pLZ19E, were also cloned into Streptococcus sanguis by using pVA1 as the vector. Hybridization by using nick-translated cloned 32P-labeled L. casei plasmid DNA as the probe revealed that none of the cryptic plasmids had appreciable DNA-DNA homology with the large lactose plasmids found in the L. casei strains, with chromosomal DNAs isolated from these strains. Partial homology was detected among several plasmids isolated from different strains, but not among cryptic plasmids isolated from the same strain.     

Characterization and molecular cloning of cryptic plasmids isolated from Lactobacillus casei.

Four small cryptic plasmids were isolated from Lactobacillus casei strains, and restriction endonuclease maps of these plasmids were constructed. Three of the small plasmids (pLZ18C, pLZ19E, and pLZ19F1; 6.4, 4.9, and 4.8 kilobase pairs, respectively) were cloned into Escherichia coli K-12 by using pBR322, pACYC184, and pUC8 as vectors. Two of the plasmids, pLZ18C and pLZ19E, were also cloned into Streptococcus sanguis by using pVA1 as the vector. Hybridization by using nick-translated cloned 32P-labeled L. casei plasmid DNA as the probe revealed that none of the cryptic plasmids had appreciable DNA-DNA homology with the large lactose plasmids found in the L. casei strains, with chromosomal DNAs isolated from these strains. Partial homology was detected among several plasmids isolated from different strains, but not among cryptic plasmids isolated from the same strain.     

Genetic transformation of Vibrio parahaemolyticus, Vibrio alginolyticus, and Vibrio cholerae non O-1 with plasmid DNA by electroporation

An electroporation procedure for the plasmid-mediated transformation of the genus Vibrio was performed, as part of an effort to develop recombinant DNA techniques for genetic manipulation of the genus Vibrio. Vibrio parahaemolyticus, V. alginolyticus, and V. cholerae non O-1 (9 different strains) were transformed with 3 vector plasmids (pACYC184, pHSG398, and pBR325). The efficiency of transformation was highly dependent on three parameters: the concentration of plasmid DNA; the strength of the electric field; and the combination of plasmid DNA and recipient strain. The drug-resistance genes on the vector plasmid were expressed in the Vibrio strains.     

Recombinant plasmids capable of integration into the chromosome of the cyanobacterium Anacystis nidulans R2

Recombinant plasmids, series pIAB and pIAH, have been constructed by insertion of BamHI or HindIII chromosomal fragments from Anacystis nidulans R2 into the tet gene of plasmid pACYC184. Plasmids pIAB and pIAH are stably maintained in Escherichia coli cells and transfer the CmR marker in transformation of Anacystis nidulans. Blot hybridization technique has shown the formation of CmR clones in transformation to result from integration of plasmid pACYC184 with the chromosome of cyanobacterium.     

Shuttle cloning vectors for the cyanobacterium Anacystis nidulans.

Hybrid plasmids capable of acting as shuttle cloning vectors in Escherichia coli and the cyanobacterium Anacystis nidulans R2 were constructed by in vitro ligation. DNA from the small endogenous plasmid of A. nidulans was combined with two E. coli vectors, pBR325 and pDPL13, to create vectors containing either two selectable antibiotic resistance markers or a single marker linked to a flexible multisite polylinker. Nonessential DNA was deleted from the polylinker containing plasmid pPLAN B2 to produce a small shuttle vector carrying part of the polylinker (pCB4). The two polylinker-containing shuttle vectors, pPLAN B2 and pCB4, transform both E. coli and A. nidulans efficiently and provide seven and five unique restriction enzyme sites, respectively, for the insertion of a variety of DNA fragments. The hybrid plasmid derived from pBR325 (pECAN1) also transforms both E. coli and A. nidulans, although at a lower frequency, and contains two unique restriction enzyme sites.     

pMS76, a plasmid capable of amplification by treatment with chloramphenicol

pMS76 is a nonconjugative, 5.54-megadalton plasmid. This plasmid is present in Escherichia coli K12 cells at about 20 copies per chromosome. In addition, the pMS76 plasmid can be mobilized by conjugative plasmids and it shares a number of other properties with the amplifiable ColE1 plasmid, including the ability to amplify copy number in the presence of chloramphenicol. However, pMS76 is compatible with ColE1-like replicons, pBR313, and with other multicopy plasmids, RSF1030 and pACYC184. Also the replication of pMS76 is rifampicin sensitive and requires DNA polymerase 1.     

Integration of various plasmids into the Bacillus subtilis chromosome

Some features of integration of temperature-sensitive pE194, pGG10 and pGG20 plasmids into the Bacillus subtilis chromosome were studied. Several auxotrophic mutations were obtained using insertion of these plasmids into the chromosome. The sites of plasmids for illegitimate recombination were determined. It was shown that the integration into the Bac. subtilis chromosome is characteristic not only for the plasmid pE194 but is the property of Staphylococcus aureus plasmid pC194 and Escherichia coli pBR322 plasmid. The influence of different Bac. subtilis rec mutations on the frequency of integration was studied.     

Nucleotide sequences and properties of the sites involved in lysogenic insertion of the bacteriophage HP1c1 genome into the Haemophilus influenzae chromosome.

Bacteriophage HP1c1 lysogenizes its host Haemophilus influenzae Rd by inserting its genome into the bacterial chromosome. The DNA segments corresponding to the integration regions on the phage and host chromosomes and the two junctions formed between phage and host sequences on lysogenic insertion were isolated and propagated in Escherichia coli HB101 as hybrid plasmids by using pBR322 as the vector. The nucleotide sequences in the vicinity of the point of recombinational insertion were determined. Phage and host DNA shared an extensive, nearly identical, segment that was 183 base pairs long. This segment consisted of 93 identical residues and a 27-residue portion containing 6 mismatches, followed by 63 identical residues. Recombinational insertion occurred within the 63-residue identical segment and involved neither duplication nor deletion of any residues. Short inverted repeats consisting of clustered A-T base pairs were present within the two 27-residue segments. Two additional sites on the host chromosome showed significant hybridization to the phage-host homology region.     

An integrative vector exploiting the transposition properties of Tn1545 for insertional mutagenesis and cloning of genes from gram-positive bacteria.

We have constructed and used an integrative vector, pAT112, that takes advantage of the transposition properties (integration and excision) of transposon Tn1545. This 4.9-kb plasmid is composed of: (i) the replication origin of pACYC184; (ii) the attachment site (att) of Tn1545; (iii) erythromycin-and kanamycin-resistance-encoding genes for selection in Gram- and Gram+ bacteria; and (iv) the transfer origin of IncP plasmid RK2, which allows mobilization of the vector from Escherichia coli to various Gram+ recipients. Integration of pAT112 requires the presence of the transposon-encoded integrase, Int-Tn, in the new host. This vector retains the insertion specificity of the parental element Tn1545 and utilises it to carry out insertional mutagenesis, as evaluated in Enterococcus faecalis. Since pAT112 contains the pACYC184 replicon and lacks most of the restriction sites that are commonly used for molecular cloning, a gene from a Gram+ bacterium disrupted with this vector can be recovered in E. coli by cleavage of genomic DNA, intramolecular ligation and transformation. Regeneration of the gene, by excision of pAT112, can be obtained in an E. coli strain expressing the excisionase and integrase of Tn1545. The functionality of this system was illustrated by characterization of an IS30-like structure in the chromosome of En. faecalis. Derivatives pAT113 and pAT114 contain ten unique cloning sites that allow screening of recombinants having DNA inserts by alpha-complementation in E. coli carrying the delta M15 deletion of lacZ alpha. These vectors are useful to clone and introduce foreign genes into the genomes of Gram+ bacteria.     

Detection of small genotypic changes in Escherichia coli by pyrolysis mass spectroscopy

Abstract Pyrolysis mass spectrometry (Py-MS0 has been used to discriminate between four very closely related strains of Escherichia coli ; a parent strain UB5021 and three derivatives each containing one of the antibiotic resistance plasmids, pBR322, pACYC184 or R388.     

Temperature-inducible amber suppressor: construction of plasmids containing the Escherichia coli serU- (supD-) gene under control of the bacteriophage lambda pL promoter.

An Escherichia coli DNA fragment containing the structural gene serU132 for the nonsense suppressor tRNASer2am was identified and purified by being cloned into a plasmid vector. Information obtained from DNA sequence analysis was used to select a serU132 fragment for insertion downstream from the bacteriophage lambda pL promoter in two pBR322-lambda derivatives. In nonsense mutant strains bearing the resulting serU132 hybrid plasmids, the presence of the lambda cI857 repressor gene carried on the same plasmid or in a prophage genome permits thermal regulation of suppressor synthesis.     

Cloning of genes responsible for acetic acid resistance in Acetobacter aceti.

Five acetic acid-sensitive mutants of Acetobacter aceti subsp. aceti no. 1023 were isolated by mutagenesis with N-methyl-N'-nitro-N-nitrosoguanidine. Three recombinant plasmids that complemented the mutations were isolated from a gene bank of the chromosome DNA of the parental strain constructed in Escherichia coli by using cosmid vector pMVC1. One of these plasmids (pAR1611), carrying about a 30-kilobase-pair (kb) fragment that conferred acetic acid resistance to all five mutants, was further analyzed. Subcloning experiments indicated that a 8.3-kb fragment was sufficient to complement all five mutations. To identify the mutation loci and genes involved in acetic acid resistance, insertional inactivation was performed by insertion of the kanamycin resistance gene derived from E. coli plasmid pACYC177 into the cloned 8.3-kb fragment and successive integration into the chromosome of the parental strain. The results suggested that three genes, designated aarA, aarB, and aarC, were responsible for expression of acetic acid resistance. Gene products of these genes were detected by means of overproduction in E. coli by use of the lac promoter. The amino acid sequence of the aarA gene product deduced from the nucleotide sequence was significantly similar to those of the citrate synthases (CSs) of E. coli and other bacteria. The A. aceti mutants defective in the aarA gene were found to lack CS activity, which was restored by introduction of a plasmid containing the aarA gene. A mutation in the CS gene of E. coli was also complemented by the aarA gene. These results indicate that aarA is the CS gene.     

Amplification of DNA at a prophage attachment site in Haemophilus influenzae.

The Escherichia coli plasmids pBR322 and pBR327 can be taken up by Haemophilus influenzae but do not replicate in this organism; however, integration of pBR into the H. influenzae chromosome was achieved by ligation to a fragment of the Haemophilus phage S2 that carried a phage attachment site (attP). Once these sequences were integrated, they could serve as sites of recombination and amplification for homologous (pBR or phage) DNA. Amplification appeared to occur in one of two prophage sites (attB) present in the H. influenzae chromosome. The extent of amplification was different in different cells and reflected the ability of these sequences to undergo rearrangement leading to the formation of a DNA ladder. The ladder was obtained by treatment of DNA with restriction enzymes that cut outside of the inserted DNA, i.e., did not cut in the repeat sequence, and represented different numbers of repeat elements. Reversed-field gel electrophoresis was instrumental in resolving amplified structures. Inasmuch as single-cell isolates gave rise to the same ladder structure, it was assumed that amplification was under regulatory control and that it reproduced the same equilibrium of repeat structures. Transformation of E. coli with the amplified H. influenzae DNA resulted in precise excision and replication of the original monomeric plasmids. This excision was independent of the recA and recBC genes.     

Analysis of IS21-mediated mobilization of plasmid pACYC184 by R68.45 in Escherichia coli

Escherichia coli plasmids like pACYC184 or pBR325 can be mobilized by the P-type plasmid R68.45, which carries a tandem duplication of insertion element IS21, at a frequency of 10^?3–10^?5 per donor cell. Analysis of exconjugant cells revealed that plasmid mobilization occurs via cointegrate formation involving transposition of IS21. No resolution of cointegrates of pACYC184 and the P-type plasmid could be found in recA recipient cells. In the cointegrate, the E. coli plasmid is flanked by single copies of IS21 in direct orientation. After resolution of the cointegrate in recA⁺ recipients, the mobilizing plasmid R68.45 lost one copy of IS21 becoming indistinguishable from plasmid R68. It was shown that during mobilization, insertion element IS21 transposes to the mobilized plasmid. Insertion sites and orientations of IS21 in 33 pACYC184::IS21 insertion mutants have been determined: IS21 was found to be integrated in plasmid pACYC184 in different regions but only in one orientation. The IS21 tandem structure of plasmid R68.45 and its role in the mobilization process is discussed.     

Role of the rom protein in copy number control of plasmid pBR322 at different growth rates in Escherichia coli K-12

The copy number per cell mass of plasmid pBR322 and a rom- derivative was measured as a function of generation time. In fast growing cells the copy number per cell mass was virtually identical for rom+ and rom- derivatives. However, the copy number of pBR322 only increased 3- to 4-fold from a 20- to 80-min generation time, whereas the copy number of the rom- derivative increased 7- to 10-fold. The copy number stayed constant for the rom+ and rom- plasmids at generation times longer than 80-100 min. Thus, the presence of the rom gene decreased the copy number of plasmid pBR322 in slowly growing cells at least 2-fold when compared with the rom- plasmid. To study the effect of the rom gene in trans we cloned the gene into the compatible P15A-derived rom- plasmid pACYC184. In cells carrying both pACYC184 rom+ and pBR322 rom- the presence of the rom gene in trans had little effect on the copy number of pBR322 rom- at fast growth, but it decreased its copy number at slow growth to the same level as found for pBR322, i.e., complemented the pBR322 rom- plasmid. The pACYC184 plasmid and its rom+ derivatives showed copy numbers similar to those of pBR322 rom- and pBR322 itself, respectively, at fast and slow growth. We conclude that the rom gene product-the Rom protein-is an important element in copy number control of ColE1-type plasmids especially in slowly growing cells.