关于细菌spore的中文名称，建议统一使用“芽胞”

今天在审稿过程中遇到了“spore”的中文名称问题,我曾经建议使用“芽胞”而不是“芽孢”,具体建议如下,供《遗传》杂志参考。     

Optimizing Bacillus subtilis spore isolation and quantifying spore harvest purity

Investigating the biochemistry, resilience and environmental interactions of bacterial endospores often requires a pure endospore biomass free of vegetative cells. Numerous endospore isolation methods, however, neglect to quantify the purity of the final endospore biomass. To ensure low vegetative cell contamination we developed a quality control technique that enables rapid quantification of endospore harvest purity. This method quantifies spore purity using bright-field and fluorescence microscopy imaging in conjunction with automated cell counting software. We applied this method to Bacillus subtilis endospore harvests isolated using a two-phase separation method that utilizes mild chemicals. The average spore purity of twenty-two harvests was 88 ± 11% (error is 1σ) with a median value of 93%. A spearman coefficient of 0.97 correlating automated and manual bacterial counts confirms the accuracy of software generated data.     

Correlation between spore structure and spore properties in Bacillus megaterium

The spores of six strains of Bacillus megaterium were divided into two distinct groups on the basis of germination. Three of the strains germinated in a mixture of l-alanine and inosine (AL type spores), and three strains germinated in a mixture of glucose and potassium nitrate (GN type spores); recriprocal germination in the respective solutions did not occur. The AL spores and the GN spores were morphologically distinct. Other differences between the two spore groups included germination inhibition characteristics, dipicolinic acid content, hexosamine content, phosphorus and magnesium content, spore coat features, ion exchange properties, and heat resistance. A correlation appears to exist between spore morphology and certain other spore properties in strains of B. megaterium.     

Optimizing Bacillus subtilis spore isolation and quantifying spore harvest purity

Investigating the biochemistry, resilience and environmental interactions of bacterial endospores often requires a pure endospore biomass free of vegetative cells. Numerous endospore isolation methods, however, neglect to quantify the purity of the final endospore biomass. To ensure low vegetative cell contamination we developed a quality control technique that enables rapid quantification of endospore harvest purity. This method quantifies spore purity using bright-field and fluorescence microscopy imaging in conjunction with automated cell counting software. We applied this method to Bacillus subtilis endospore harvests isolated using a two-phase separation method that utilizes mild chemicals. The average spore purity of twenty-two harvests was 88 ± 11% (error is 1σ) with a median value of 93%. A spearman coefficient of 0.97 correlating automated and manual bacterial counts confirms the accuracy of software generated data.     

The Bacillus anthracis spore

In response to starvation, Bacillus anthracis can form a specialized cell type called the spore, which is the infectious particle for the disease anthrax. The spore is largely metabolically inactive and can resist a wide range of stresses found in nature. In spite of its dormancy, the spore can sense the presence of nutrient and rapidly return to vegetative growth. These properties help the spore to persist for long periods of time in the environment, survive host defenses after entering the body, and cause disease when the correct location in the host is reached. The anatomy of the spore is unique among bacteria, being comprised of a series of specialized concentric shells, each of which provides specific critical functions. Surrounding the spore core (which houses the chromosome) is a peptidoglycan layer important for spore dormancy, a protein shell that resists a variety of toxic molecules, and finally an exterior protein and glycoprotein layer that, among other functions, mediates interactions with surfaces, including those encountered by the spore within the host. Detailed molecular analysis of these shells has shed considerable light on how each layer determines specific spore properties. Future work, especially on the outermost spore layer, is likely to advance therapeutics, methods for spore decontamination and other critical biodefense technologies.     

Influence of certain environmental factors on spore germination and spore differentiation inPithophora oedogonia

Of the light- and dark-stored spores ofPithophora oedogonia for over a period of one and half years, the latter exhibited complete failure of germination under controlled culture conditions. pH 8, blue light and 1 klx intensity of white light proved to be ideal conditions as they resulted in optimum germination of akinetes. pH 5, green light and 0.25 klx light intensity delayed the initiation of sporulation and also reduced percentage sporulation. All filaments died before sporulation in pH 4.     

Complete stereospecific repair of a synthetic dinucleotide spore photoproduct by spore photoproduct lyase

Spore photoproduct lyase (SP lyase), a member of the radical S-adenosylmethionine superfamily of enzymes, catalyzes the repair of 5-thyminyl-5,6-dihydrothymine [spore photoproduct (SP)], a type of UV-induced DNA damage unique to bacterial spores. The anaerobic purification and characterization of Clostridium acetobutylicum SP lyase heterologously expressed in Escherichia coli, and its catalytic activity in repairing stereochemically defined synthetic dinucleotide SPs was investigated. The purified enzyme contains between 2.3 and 3.1 iron atoms per protein. Electron paramagnetic resonance (EPR) spectroscopy reveals an isotropic signal centered at g = 1.99, characteristic of a [3Fe–4S]⁺ cluster accounting for 3–4% of the iron in the sample. Upon reduction, a nearly axial signal (g = 2.03, 1.93 and 1.92) characteristic of a [4Fe–4S]⁺ cluster is observed that accounts for 34–45% of total iron. Addition of S-adenosylmethionine to the reduced enzyme produces a rhombic signal (g = 2.02, 1.93, 1.82) unique to the S-adenosyl-l-methionine complex while decreasing the overall EPR intensity. This reduced enzyme is shown to rapidly and completely repair the 5R diastereomer of a synthetic dinucleotide SP with a specific activity of 7.1 ± 0.6 nmol min⁻¹ mg⁻¹, whereas no repair was observed for the 5S diastereomer.     

The spore wall and polar tube proteins of the microsporidian Nosema grylli: the major spore wall protein is released before spore extrusion

Incubation of Nosema grylli spores in alkaline--saline solution (10 mM KOH, 170 mM KCl) leads to solubilization of the major spore wall protein of 40 kDa (p40). Both the compounds of this solution are crucial for p40 solubilization. After spore incubation in 170 mM KCl no proteins were released in the medium. In contrast, 10 mM KOH causes a release of many spore proteins but only a small amount of p40. A long storage of spores (over a year) in water or 0.02% sodium azide results in a sharp decrease of p40 content. Specific polyclonal antibodies were obtained by immunization of rabbits with isolated p40. The specificity of serum was confirmed by immunoblotting. IFA showed reliable reaction on the envelopes of sporonts and sporoblasts, whereas only part of spores reacted with antibodies. This distinction may be due to changing surface antigens during spore maturation. Solubilization of p40 under alkaline conditions could be associated with spore extrusion, since a subsequent transfer of spores to neutral solution leads to their discharge. Subsequent wash of discharged spores with 1-3% SDS, 9 M urea and treatment by 100% 2-ME result in solubilization of protein of 56 kDa (p56). The maximum concentration of 2-ME is important for isolation of pure p56. Evidence has been provided that p56 is a protein of N. grylli polar tubes. Treatment of discharged spores by 2-ME in the presence of SDS results in solubilization of four additional proteins with molecular weights about 46, 34, 21 and 15 kDa.     

Inhibition of microsporidian spore germination

Microsporidia are obligate intracellular parasites that are increasingly recognized as significant causes of disease in AIDS patients. Gordon Leitch, Govinda Visvesvara and Qing He here describe the deployment of the microsporidian spore infection apparatus, the polar filament, and show how this may be a useful site for chemotherapeutic interdiction of the infections caused by these parasites.     

Morphogenesis of bacillus spore surfaces

Spores produced by bacilli are encased in a proteinaceous multilayered coat and, in some species (including Bacillus anthracis), further surrounded by a glycoprotein-containing exosporium. To characterize bacillus spore surface morphology and to identify proteins that direct formation of coat surface features, we used atomic-force microscopy (AFM) to image the surfaces of wild-type and mutant spores of Bacillus subtilis, as well as the spore surfaces of Bacillus cereus 569 and the Sterne strain of Bacillus anthracis. This analysis revealed that the coat surfaces in these strains are populated by a series of bumps ranging between 7 and 40 nm in diameter, depending on the species. Furthermore, a series of ridges encircled the spore, most of which were oriented along the long axis of the spore. The structures of these ridges differ sufficiently between species to permit species-specific identification. We propose that ridges are formed early in spore formation, when the spore volume likely decreases, and that when the spore swells during germination the ridges unfold. AFM analysis of a set of B. subtilis coat protein gene mutants revealed three coat proteins with roles in coat surface morphology: CotA, CotB, and CotE. Our data indicate novel roles for CotA and CotB in ridge pattern formation. Taken together, these results are consistent with the view that the coat is not inert. Rather, the coat is a dynamic structure that accommodates changes in spore volume.     

Reticulate spore ornamentation in Strobilomyces

Reticulate spore ornamentation in Strobilomyces(Boletaceae,Basidiomycotina) is visible under light microscopy(bright field and phase contrast) up to 1,500×.While some distinctions can be made at this magnification,ontogeny and fine structure of the ornamentation cannot be discerned.Scanning electron microscope images,conversely,reveal significant additional structure from which the ontogenetic process can be traced.Citing numerous New and Old World collections,this paper presents evidence distinguishing reticulate ornamentation ontogeny in these disjunct populations.     

酵母菌与其“芽体”

从细胞生物学和分子生物学的层面对酵母菌的芽体形成过程及芽体与母体细胞的相关性作了综合评述。