Thermal quenching of luminescence of LiSr4(BO3)3:Eu2+ orange‐emitting phosphor

An orange‐emitting phosphor, Eu²⁺‐activated LiSr₄(BO₃)₃, was synthesized using the conventional solid‐state reaction. The photoluminescence excitation and emission spectra, and temperature dependence of the luminescence intensity of the phosphor were investigated. The results showed that LiSr₄(BO₃)₃:Eu²⁺ could be efficiently excited by incident light of 250–450 nm, and emits a strong orange light. With increasing temperature, the emission bands of LiSr₄(BO₃)₃:Eu²⁺ show an abnormal blue‐shift with broadening bandwidth and decreasing emission intensity. Copyright © 2013 John Wiley & Sons, Ltd.     

Optical properties and energy transfer of Eu2+/Ce3+ co‐activated Na3Ca6(PO4)5 phosphor

Ce³⁺/Eu²⁺ co‐doped Na₃Ca₆(PO₄)₅ phosphors were prepared using a combustion‐assisted synthesis method. X‐Ray powder diffraction (XRD) analysis confirmed the formation of a Na₃Ca₆(PO₄)₅ crystal phase. Na₃Ca₆(PO₄)₅:Eu²⁺ phosphors have an efficient bluish‐green emission band that peaks at 489 nm, whereas Ce³⁺‐doped Na₃Ca₆(PO₄)₅ showed a bright emission band at 391 nm. Analysis of the experimental results suggests that enhancement of the Eu²⁺ emission intensity in co‐doped Na₃Ca₆(PO₄)₅:Eu²⁺,Ce³⁺ phosphors is due to a resonance‐type energy transfer from Ce³⁺ to Eu²⁺ ions, which is predominantly governed by an exchange interaction mechanism. These results indicate that Ce³⁺/Eu²⁺ co‐doped Na₃Ca₆(PO₄)₅ is potentially useful as a highly efficient, bluish‐green emitting, UV‐convertible phosphor for white‐light‐emitting diodes. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis and photoluminescence properties of Sm3+‐doped YAl3(BO3)4 phosphor

A near ultraviolet excitable phosphor based on Sm³⁺‐doped YAl₃(BO₃)₄ has been synthesized by modified solid‐state reaction at 1000°C. The phase purity and photoluminescence (PL) behavior of the phosphor are studied in detail using the powder X‐ray diffraction technique and PL measurements. X‐ray diffraction reveals that the phase purity of YAl₃(BO₃)₄ critically depends upon the boric acid concentration. The phosphor has strong excitation at 406 nm in the near ultraviolet region (350–420 nm) and its emission peaks were monitored at 564, 599 and 643 nm. Further, detailed PL analysis demonstrates that the substitution of Sm³⁺ ions at sites of Y³⁺ and Al³⁺ ions enhances the PL efficiency of the phosphor appreciably. First, the PL efficiency of YAl₃(BO₃)₄:Sm³⁺ was compared with commercial (Y,Gd)BO₃:Eu³⁺ red phosphor. The Fourier transform infrared study provides essential information regarding the change in metal–oxygen bond vibrations of the phosphor. The morphology of the phosphor was investigated through scanning electron microscopy, which reveals that the phosphor possessed distorted spherical and rectangular shapes with average grain sizes in the range 0.5–1 µm. Copyright © 2013 John Wiley & Sons, Ltd.     

Thermoluminescence characterization of Dy3+‐activated Mg5(BO3)3F low Zeff phosphor

Thermoluminescence characteristics of Dy³⁺‐activated Mg₅(BO₃)₃F low Z_eff phosphor are described. The Mg₅(BO₃)₃F phosphor doped with Dy³⁺ as activator was prepared by the modified solid‐state reaction. Formation of the compound was confirmed by use of X‐ray powder diffraction. The X‐ray powder diffraction pattern of the as‐prepared compound shows a good match with the available JCPDS data. The γ‐irradiated Mg₅(BO₃)₃F:Dy³⁺ phosphor shows a simple glow curve peaking at about 148°C indicating that only one type of trap is being activated within a particular temperature range. The kinetic parameters, including activation energy and frequency factor were determined using Chen's method. The activation energy and frequency factors were 0.75 eV and 4.508 × 10⁹/s respectively. The Z_eff of Mg₅(BO₃)₃F:Dy³⁺ phosphor was 9.84. Copyright © 2012 John Wiley & Sons, Ltd.     

Eu3+-activated red phosphor Ca3YAl3B4O15 with low thermal quenching behaviour

This paper reports a sequence of a Ca₃YAl₃B₄O₁₅:xEu³⁺ red phosphor prepared using a high-temperature solid-state reaction. At the excitation of 396 nm, the samples emitted intense red emission centred at ~623 nm, which could be attributed to the ⁵D₀→⁷F₂ transition of the Eu³⁺ ion. The results showed that the optimum Eu³⁺ doping concentration of Ca₃YAl₃B₄O₁₅:Eu³⁺ phosphor was x = 80 mol%, and the concentration quenching mechanism of Ca₃YAl₃B₄O₁₅:Eu³⁺ red phosphor belonged to the exchange coupling between Eu³⁺ ions. The Commission Internationale de l'éclairage (CIE) coordinates and colour purity of Ca₃Y_0.2Al₃B₄O₁₅:0.8Eu³⁺ were calculated as (0.6375, 0.3476) and 95.5%, respectively. Moreover, the red emission of the obtained phosphor Ca₃YAl₃B₄O₁₅:0.8Eu³⁺ exhibited a low thermal quenching behaviour with an intensity retention rate of 92.85% at 150°C. The above results manifest that the Eu³⁺-activated Ca₃YAl₃B₄O₁₅ phosphor is predicted to be a promising red luminescent component for white light-emitting diodes.     

Photoluminescence and thermoluminescence characteristics of Sr3B2O6:Eu2+ yellow phosphor

Sr₃B₂O₆:Eu²⁺ yellow phosphor was prepared by the combustion method. The crystalline structure, photoluminescence and thermoluminescence properties of Sr₃B₂O₆:Eu²⁺ were investigated extensively. The X‐ray diffraction result indicates that the Sr₃B₂O₆:Eu²⁺ phosphor exhibited a rhombohedral crystal structure. The emission spectra under a 435 nm excited wavelength showed an intense broad band peaking at 574 nm, which corresponds to the 4f⁶5d¹ → 4f⁷ transition of Eu²⁺ ion. There were two different sites of Sr replaced by Eu in host lattice. The concentration quenching process between Eu²⁺ ions is determined and the corresponding concentration quenching mechanism was verified as dipole‐quadrupole interaction. The glow curve under 3 Gy β‐ ray irradiation had the glow peak at 160°C and the average activation energy was defined as about 0.98 eV. Copyright © 2015 John Wiley & Sons, Ltd.     

Luminescence of Eu and Ce in K3Ca2(SO4)3F fluoride material

A new halophosphor K₃Ca₂(SO₄)₃ F activated by Eu or Ce and K₃Ca₂(SO₄)₃ F:Ce,Eu co‐doped halosulfate phosphor has been synthesized by the co‐precipitation method and characterized for its photoluminescence (PL). The PL emission spectra of the K₃Ca₂(SO₄)₃ F :Ce phosphor show emission at 334 nm when excited at 278 nm due to 5d → 4f transition of Ce³⁺ ions. In the K₃Ca₂(SO₄)₃ F:Eu lattice, Eu²⁺ (440 nm) as well as Eu³⁺ (596 nm and 615 nm) emissions have been observed showing ⁵D₀ → ⁷ F₁ and ⁵D₀ → ⁷ F₂ transition of the Eu³⁺ ion, which is in the blue and red region of the visible spectrum respectively. The trivalent europium ion is very useful for studying the nature of metal coordination in various systems owing to its non‐degenerate emitting ⁵D₀ state. K₃Ca₂(SO₄)₃ F:Ce,Eu is suitable for Ce³⁺ → Eu²⁺ → Eu³⁺ energy transfer in which Ce³⁺and Eu²⁺ play the role of sensitizers and Eu²⁺ and Eu³⁺ act as the activators. The observations presented in this paper are relevant for lamp phosphors. Copyright © 2015 John Wiley & Sons, Ltd.     

Enhanced luminescence and white light emission from Eu3+‐co‐doped K3Ca2(SO4)3Cl:Dy3+ phosphor with near visible ultraviolet excitation for white LEDs

The luminescent properties of europium (Eu)‐ and dysprosium (Dy)‐co‐doped K₃Ca₂(SO₄)₃Cl halosulfate phosphors were analyzed. This paper reports the photoluminescence (PL) properties of K₃Ca₂(SO₄)₃Cl microphosphor doped with Eu and Dy and synthesized using a cost‐effective wet chemical method. The phosphors were characterized by X‐ray diffraction and scanning electron microscopy. The CIE coordinates were calculated to display the color of the phosphor. PL emission of the prepared samples show peaks at 484 nm (blue), 575 nm (yellow), 594 nm (orange) and 617 nm (red). The emission color of the Eu,Dy‐co‐doped K₃Ca₂(SO₄)₃Cl halophosphor depends on the doping concentration and excitation wavelength. The addition of Eu in K₃Ca₂(SO₄)₃Cl:Dy greatly enhances the intensity of the blue and yellow peaks, which corresponds to the ⁴ F_9/2 → ⁶H_15/2 and ⁴ F_9/2 → ⁶H_13/2 transitions of Dy³⁺ ions (under 351 nm excitation). The Eu³⁺/Dy³⁺ co‐doping also produces white light emission for 1 mol% of Eu³⁺, 1 mol% of Dy³⁺ in the K₃Ca₂(SO₄)₃Cl lattice under 396 nm excitation, for which the calculated chromaticity coordinates are (0.35, 0.31). Thus, K₃Ca₂(SO₄)₃Cl co‐doped with Eu/Dy is a suitable candidate for NUV based white light‐emitting phosphors technology. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis of the long‐persistence phosphor CaAl2O4:Eu2+, Dy3+, Nd3+ by combustion method and its luminescent properties

Calcium aluminate phosphor co‐doped Eu²⁺, Dy³⁺, Nd³⁺ is prepared by the combustion method. We study systemically the influences of the quantity of mixed Dy³⁺ ion, the quantity of flux H₃BO₃, the differences in dispersing methods between magnetic stirring and ultrasonic dispersing and the combustion temperature on the long‐persistence phosphor. The analytical results indicate that Dy³⁺ ion improves the properties of the phosphors CaAl₂O₄:Eu²⁺, Nd³⁺. The appropriate quantity of flux H₃BO₃ to reduce the forming temperature of the sample was determined. The monoclinic single phase of CaAl₂O₄ formed at 500°C and remained steady. The calcium aluminate co‐doped Eu²⁺, Dy³⁺, Nd³⁺ was synthesized by dispersal of the raw material using the ultrasonic method, and it had better optical properties. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and luminescence of Eu3+‐doped in triple phosphate Ca8MgBi(PO4)7 with whitlockite structure

Triple whitlockite‐type structure‐based red phosphors Ca₈MgBi_1?x(PO₄)₇:xEu³⁺ (x = 0.10, 0.20, 0.30, 0.40, 0.50, 0.60, 0.70, 0.80 and 1.00) were synthesized by a conventional solid‐state reaction route and characterized by their X‐ray crystal structures. The X‐ray diffraction (XRD) patterns, Fourier transform infrared spectra, morphologies, photoluminescence spectra, UV/Vis reflectance spectra, decay times and the International Commission on Illumination (CIE) chromaticity coordinates of Ca₈MgBi_1?x(PO₄)₇:xEu³⁺ were analyzed. Eu‐doped Ca₈MgBi(PO₄)₇ phosphors exhibited strong red luminescence with peaks at 616 nm due to the ⁵D₀ → ⁷ F₂ electric dipole transition of Eu³⁺ ions after excitation at 396 nm. The UV/Vis spectra indicated that the band gap of Ca₈MgBi_0.30(PO₄)₇:0.70Eu³⁺ is larger than that of Ca₈MgBi(PO₄)₇. The phosphor developed in this study has great potential as a red‐light‐emitting phosphor for UV light‐emitting diodes. Copyright © 2015 John Wiley & Sons, Ltd.     

Effect of replacement of Ca by Zn on the structure and optical property of CaTiO3:Eu3+ red phosphor prepared by sol‐gel method

Eu³⁺‐doped calcium titanate red phosphors, Ca_1‐xZn_xTiO₃:Eu³⁺, were prepared by the sol‐gel method. The structure of prepared Ca_1‐xZn_xTiO₃:Eu³⁺ phosphors were investigated by X‐ray diffraction and infrared spectra. Due to the ⁵D₀ → ⁷F_1–3 electron transitions of Eu³⁺ ions, photoluminescence spectra showed a red emission at about 619 nm under excitation of 397 nm and 465 nm, respectively. When zinc was added to the host, the luminescent intensity of Ca_1‐xZn_xTiO₃:Eu³⁺ was markedly improved several fold compared with that of CaTiO₃:Eu³⁺. Ca_0.9Zn_0.1TiO₃:Eu³⁺ also had higher luminescence intensity than the commercially available Y₂O₃:Eu³⁺ phosphors under UV light excitation. Copyright © 2014 John Wiley & Sons, Ltd.     

Structural characterization and optical properties of Ca2MgSi2O7:Eu2+,Dy3+ phosphor by solid‐state reaction method

Ca₂MgSi₂O₇:Eu²⁺,Dy³⁺ phosphor was prepared by the solid‐state reaction method under a weak reducing atmosphere. The obtained phosphor was characterized using X‐ray diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), energy dispersive X‐ray spectroscopy (EDX) and Fourier transform infrared (FT‐IR) techniques. The phase structure of the Ca₂MgSi₂O₇:Eu²⁺,Dy³⁺ phosphor was akermanite type, which is a member of the melilite group. The surface morphology of the sintered phosphor was not uniform and phosphors aggregated tightly. EDX and FT‐IR spectra confirm the elements present in the Ca₂MgSi₂O₇:Eu²⁺,Dy³⁺ phosphor. Under UV excitation, a broadband emission spectrum was found. The emission spectra observed in the green region centered at 535 nm, which is due to the 4f–5d transition. The mechanoluminescence (ML) intensity of the prepared phosphor increased linearly with increases in the mechanical load. The ML spectra were similar to the photoluminescence (PL), which indicates that ML is emitted from the same emitting center of Eu²⁺ ions as PL. Copyright © 2014 John Wiley & Sons, Ltd.     

Luminescence study of Eu3+doped Li6Y(BO3)3 phosphor for solid‐state lighting

In this study, Li₆Y_1–xEu_x(BO₃)₃ phosphor was successfully synthesized using a modified solid‐state diffusion method. The Eu³⁺ ion concentration was varied at 0.05, 0.1, 0.2, 0.5 and 1 mol%. The phosphor was characterized for phase purity, morphology, luminescent properties and molecular transmission at room temperature. The XRD pattern suggests a result closely matching the standard JCPDS file (#80‐0843). The emission and excitation spectra were followed to discover the luminescence traits. The excitation spectra indicate that the current phosphor can be efficiently excited at 395 nm and at 466 nm (blue light) to give emission at 595 and 614 nm due to the ⁵D₀ → ⁷F_j transition of Eu³⁺ ions. Concentration quenching was observed at 0.5 mol% Eu³⁺ in the Li₆Y_1–xEu_x(BO₃)₃ host lattice. Strong red emission with CIE chromaticity coordinates of phosphor is x = 0.63 and y = 0.36 achieved with dominant red emission at 614 nm the ⁵D₀ → ⁷ F₂ electric dipole transition of Eu³⁺ ions. The novel Li₆Y_1–xEu_x(BO₃)₃ phosphor may be a suitable red‐emitting component for solid‐state lighting using double‐excited wavelengths, i.e. near‐UV at 395 nm and blue light at 466 nm. Copyright © 2015 John Wiley & Sons, Ltd.     

Mechanoluminescence,thermoluminescence, photoluminescence studies on Ca3Y2Si3O12:RE3+ (RE3+ = Dy3+and Eu3+) phosphors

Dy³⁺ and Eu³⁺ activated Ca₃Y₂Si₃O₁₂ phosphors were synthesized by the solid‐state synthesis method. The phosphors were characterized by X‐ray diffraction (XRD), mechanoluminescence (ML), thermoluminescence (TL) and photoluminescence (PL) to determine structure and luminescence. For ML glow curves, only one peak was observed, as only one type of luminescence centre was formed during irradiation. The Ca₃Y₂Si₃O₁₂:Dy³⁺ TL glow curve showed a single peak at 151.55°C and the Ca₃Y₂Si₃O₁₂:Eu³⁺ TL glow curve peaked at 323°C with a small peak at 192°C, indicating that two types of traps were activated. The trapping parameters for both the samples were calculated using Chen's peak shape method. Dy³⁺‐activated Ca₃Y₂Si₃O₁₂ showed emission at 482 and 574 nm when excited by a 351 nm excitation wavelength, whereas the Eu³⁺‐activated Ca₃Y₂Si₃O₁₂ phosphor PL emission spectra showed emission peaks at 613 nm, 591 nm, 580 nm when excited at 395 nm wavelength. When excited at 466 nm, prominent emission peaks were observed at their respective positions with very slight shifts. Copyright © 2015 John Wiley & Sons, Ltd.     

Photoluminescence in K3Ca2(SO4)3Cl‐doped Eu3+ phosphor

In this article we report Eu³⁺ luminescence in novel K₃Ca₂(SO₄)₃Cl phosphors prepared by wet chemical methods. The Eu³⁺ emission was observed at 594 nm and 615 nm, keeping the excitation wavelength constant at 396 nm nearer to light‐emitting diode excitation, Furthermore, phosphors were characterized by X‐ray diffraction for the confirmation of crystallinity. The variation of the photoluminescence intensity with impurity concentration has also been discussed. Thus, prominent emission in the red region makes prepared phosphors more applicable for white light‐emitting diodes. Copyright © 2013 John Wiley & Sons, Ltd.     

Pyrolytic synthesis and luminescence of porous lanthanide Eu‐MOF

A lanthanide metal coordination polymer [Eu₂(BDC)₃(DMSO)(H₂O)] was synthesized by the reaction of europium oxide with benzene‐1,3‐dicarboxylic acid (H₂BDC) in a mixed solution of dimethyl sulfoxide (DMSO) and water under hydrothermal conditions. The crystal structure of Eu₂(BDC)₃(DMSO)(H₂O) was characterized by X‐ray diffraction (XRD). Thermo‐gravimetric analysis of Eu₂(BDC)₃(DMSO)(H₂O) indicated that coordinated DMSO and H₂O molecules could be removed to create Eu₂(BDC)₃(DMSO)(H₂O)‐py with permanent microporosity, which was also verified by powder XRD (PXRD) and elemental analysis. Both Eu₂(BDC)₃(DMSO)(H₂O) and Eu₂(BDC)₃(DMSO)(H₂O)‐py showed mainly Eu‐based luminescence and had characteristic emissions in the range 550–700 nm. Copyright © 2015 John Wiley & Sons, Ltd.     

Luminescence properties of barium – gadolinium–titanate ceramics doped with rare‐earth ions (Eu3+ and Tb3+)

Barium‐gadolinium‐titanate (BaGd₂Ti₄O₁₂) powder ceramics doped with rare‐earth ions (Eu³⁺ and Tb³⁺) were synthesized by a solid‐state reaction method. From the X‐ray diffraction spectrum, it was observed that Eu³⁺ and Tb³⁺:BaGd₂Ti₄O₁₂ powder ceramics are crystallized in the form of an orthorhombic structure. Scanning electron microscopy image shows that the particles are agglomerated and the particle size is about 200 nm. Eu³⁺‐ and Tb³⁺‐doped BaGd₂Ti₄O₁₂ powder ceramics were examined by energy dispersive X‐ray analysis, Fourier transform infrared spectroscopy, photoluminescence and thermoluminescence (TL) spectra. Emission spectra of Eu³⁺‐doped BaGd₂Ti₄O₁₂ powder ceramics showed bright red emission at 613 nm (⁵D₀ → ⁷F₂) with an excitation wavelength λ_exci = 408 nm (⁷F₀ → ⁵D₃) and Tb³⁺:BaGd₂Ti₄O₁₂ ceramic powder has shown green emission at 534 nm (⁵D₄ → ⁷F₅) with an excitation wavelength λ_exci = 331 nm ((⁷F₆ → ⁵D₁). TL spectra show that Eu³⁺ and Tb³⁺ ions affect TL sensitivity. Copyright © 2014 John Wiley & Sons, Ltd.     

Two‐ step synthesis and luminescent properties of BaB2O4:Eu3+ nano/microphosphors prepared from Ba‐B‐O:Eu3+ precursor

The BaB₂O₄:Eu³⁺ nano/microphosphors with sphere‐, rod‐, and granular‐like morphologies were successfully obtained by a two‐step method using Ba‐B‐O:Eu³⁺ as the precursor. The structure, morphology and photoluminescent properties of the products were characterized by Fourier transfer infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD), thermogravimetry‐differential thermal analysis (TG‐DTA), scanning electron microscopy (SEM) and photoluminescence (PL). The formation mechanisms of Ba‐B‐O:Eu³⁺ and BaB₂O₄:Eu³⁺ were proposed. The results show that the BaB₂O₄:Eu³⁺ could retain the original morphologies of their respective precursors largely. The BaB₂O₄:Eu³⁺ prepared by this two‐step method exhibited better morphology, smaller particle size and better crystallinity than when prepared by a solid‐state method. The granular‐like BaB₂O₄:Eu³⁺ red phosphor prepared by this two‐step method exhibited stronger PL intensity and better red color purity than when prepared by a solid‐state method.     

Luminescence in Li3Al2(PO4)3:Eu2+

A series of efficient Li₃Al₂(PO₄)₃:Eu²⁺ novel phosphors were synthesized by the facile combustion method. The effects of dopant on the luminescence behavior of Li₃Al₂(PO₄)₃ phosphor were also investigated. The phosphors were characterized by X‐ray diffraction, field emission scanning electron microscope and photoluminescence techniques. The result shows that all samples can be excited efficiently by near‐ultraviolet excitation under 310 nm. The emission was observed for Li₃Al₂(PO₄)₃:Eu²⁺ phosphor at 425 nm, which corresponded to the d → f transition. The concentration quenching of Eu²⁺ was observed in Li₃Al₂(PO₄)₃:Eu²⁺ when the Eu concentration was at 0.5 mol%. The prepared powders exhibited intense blue emission at the 425 nm owing to the Eu²⁺ ion by Hg‐free excitation at 310 nm (i.e., solid‐state lighting excitation). Consequently, the availability of such a phosphor will significantly help in the development of blue‐emitting solid‐state lighting applications. Copyright © 2012 John Wiley & Sons, Ltd.     

Enhanced orange–red emission of SrZn2(PO4)2:Sm3+ via codoping Eu2+ as a sensitizer

A series of Eu²⁺‐, Sm³⁺‐ and Eu²⁺/Sm³⁺‐doped SrZn₂(PO₄)₂ samples were synthesized using a solid‐state reaction. SrZn₂(PO₄)₂:Eu²⁺ presented a broad emission band due to 4f⁶5d–4f⁷ transition of the Eu²⁺ ion. The spectra of SrZn₂(PO₄)₂:Sm sintered in air and H₂/N₂ were identical in every aspect, except for a very small difference in intensity. A Eu²⁺–Sm³⁺ energy transfer scheme was proposed to realize the sensitization of Sm³⁺ ion emission by Eu²⁺ ions, and UV‐convertible Sm³⁺‐activated red phosphor was obtained in SrZn₂(PO₄)₂:Eu²⁺, Sm³⁺. Copyright © 2015 John Wiley & Sons, Ltd.